Variable shows technical names in variable entry

Hi
I have a weird problem in one of my queries.
When I execute my query two of the variables in the variable entry are shown with their technical names.
Furthermore when I look for the variables in the variables sequence tab in the Query Designer those two vaiables are not on the list. I've also look for the variables in the characteristic value variable and they are nowhere to be found.
Does anyone have any idea how this is possible?

Hi check the varaibles by giving ur tech.name of report input parameter to the below program,
RSRQ_QUERYDEFINITION
it will all the query details. So you can find ur varaibles where it is used exactly.
bhaskar

Similar Messages

  • Infoareas show technical names only in RRMX

    Hi All,
    We find that in Production system, when we open Queries in RRMX, all the info areas show technical names only instead of text and technical names. Has anybody faced this before and if so how is this corrected? This does not happen in Dev  and Quality systems.
    Thanks.
    Param

    there is a button like screw driver present on the top right side pop window which open when you select the info area.Click that button & then it will show your desired description.

  • Bex Query calc key figures in Crystal report not showing technical names.

    Hi,
    I have created calculated key figures in a BEx query for which the data comes from a SAP BW cube. I have assigned each of the calculated key figures a proper technical name which I expect to see when I bring it to crystal report. When I bring that query in Crystal as a data source the calculated key figures show a wier network id names instead of the technical names. I am having a problem in using those wierd technical name in my report and my formula's as I am not able to identify what is what.
    Please urgent help requested.
    Thanks
    Mahendra

    I dont have an account on such website. I will explain u the problem in detail.
    When I create a calculate key figure in SAP BEx query designer I assigned a technical name to it, a meaningful one. In my case one such example is Actual_revenue is the name that i have assigned and the description is Actual revenue. When I create a crystal report from it and in that report if i create a formula.
    I get this {ZIC_COPA_Z_SALES.[Measures]-[25V1KYL4VE92X0T4OMHVYM90V]}
    If u see it its a wier 25 digit name.
    Instead of this I want to see
    {ZIC_COPA_Z_SALES.[Measures]-[ACTUAL_REVENUE]} which is what I have given in the query. I am using the SAP BW MDX driver to connect to Bex query.

  • Web Page title is showing technical name of the report

    When BI report is running from portal (web), in the wab page titel is showing report technical name. But i want to display report description,
    If any one knows about this pls send me the how fix that. I am working on BI 7
    Thanks
    Samit

    Hi,
    Have you used a Text Item for displaying the name of the Query ? If yes, in the properties of the Text Item, you would have binded the Data Provider. Here, you can give the option of Displaying General Text and the General Test Item can be the Query Description.
    Pls let me know if you have used somthing else or in some other way.

  • Technical names are appearing in OVS pop-up for buttons.

    HI Experts,
    I have used OVS help in my application, I have deployed and tested it on local WAS where everything works fine.
    But, when i access it from portal deployed on staging server, the OVS popup window shows technical names for buttons e.g for Go it shows "view.MainView.gr.c.tc.goSearch.text", same is for Exit button.
    Could you please tell me where can be mistake and what are corrective measures?
    regards,
    abhijeet

    Hi,
       You will need to open an OSS message for the same under BC-WD-JAV-RUN component. This is an issue with the NW WAS version that you are running. You can find a similar issue [here|OVS - Buttons without correct label].
    Regards,
    Satyajit.

  • Technical Names by default

    Hy Experts!
    Every time I use the modeler, I must change setting for objects as 'show technical names'.
    How can I fix this view (technical name) as default?
    Thanks in advance!

    Hi SSAP,
    for each section of the planning modeler you can customize the settings and save them. Just go to "settings" and adjust the settings as you like. Afterwards go to "save as" and save the settings. Be aware to activate the "reuse"-option (should be something like apply as standard).
    Brgds,
    Marcel

  • Currency Conversion Variable is showing the Technical name of the variable.

    Hi friends,
    We are using currency conversion Variable in our querie, it was showing the description of the variable until yesterday.
    Somehow something has changed and suddenly its showing up the Technical Name inteasd of Description. This is happening not only to one variable but for many of them.
    Can someone pls guide me how to rectify this?
    Your help verymuch appreciated.
    Thanks in advance.
    BN

    We had the same problem. Unfortunately this setting only seems to be available for a query view. We were using web reporting anyway so we just converted the dataprovider to be a query view where this setting had been made. It's a bit ugly but it worked.

  • In the filter the value of text variable is not shown, only technical name.

    Hi All,
    We have some odd behavior of text variables in the filter screen of key-figures.
    After entering values in the variable screen, the report is executed.
    Within the report all text variables are filled, with the values entered in the variable screen.
    I say all, because we use both sap standard variables &0T_FPER& as customer specific &ZFSCYR&.
    When i want to change the key figures showned, i press the filter icon for key-figures (BW 3.5)
    In the list shown: existing filtervalues, the textvariables of SAP standard are filled with the value entered in the variable screen. However the customer specific is shown with the technical name (&ZFSCYR&) and not the value.
    Has anyone experience with this behavior or even better a solution to prevent this?
    As allways, each usefull answer points assigned!
    Regards,
    René

    Hi Rene,
    If ur custom text variable is not getting populated then you need to check out the code that u have written in there in CMOD for this and ofcourse if ur using this text variable after report execution then it will definately be in i_step 2.
    So best way is to debug your code and check that using code RSRT.
    Thanks
    Dipika

  • Variable entry screen for query doesnt show selection values.

    Hi,
    I've created a query with date varibale Quarter From-To. When i execute this query, the variable entry screen pops up but when i try to select values just shows ??? and not the text.
    if i run the same query in RSRT the variable entry screen pops up but here the selection values are present for me to choose from.
    can anyone tell why the values arent showing when the query is executed.
    Thanks

    yes, it seems to be a problem with NetWeaver BI BEx Java Web runtime as it works in RSRT and web analyzer. Found a note on marketplace note 125357 - No values displayed for attributes in input help but this did not resolve issue.
    A call has been raised now as it seems to be a product fault

  • Copying an existing Variable with change of technical name in Qery designer

    Hi All,
    Is it  possible to copy a variable and save it with diffrent technical name on same IO.
    I understand before BW 3.0 there was RSZV (Maintain Variable) but what is the alternative for the same in BI 7.0.
    Thanks in Advance
    NooN

    Hi,
    Check the below thread might help you,
    [http://sap.ittoolbox.com/groups/technical-functional/sap-bw/copy-of-variable-1063532]
    Regards,
    Durgesh.

  • APD - error when activating, problem: 7.0 variable with long technical name

    Hello everybody!
    I have got the following problem:
    I created an APD, with one filter on 0calday using a variable. This variable was created on our own and works without any problems. It's a 7.0 variable with a long description "W_E_M_0CALDAY_WDLAS"
    If I try to activate the APD I get an error message "Analysis Process Has Errors, Activation Is Not Possible" and "Variable W_E_M_0CALDAY_WDLAS does not exist actively". But this variable is active!
    My colleague told me, that there seems to be a problem with long technical names of variables in APD. I tried to find a SAP note to this topic, but I didn't.
    Had anyone else this problem? How was it solved? Or are there any SAP notes I didn't find?
    Thanks for your help!
    Bettina

    In the meantime I copied the variable to a shorter name, but it still doesn't work. I tried it with a 3.x variable and a 7.0 variable. In the exit I first added an OR condition to the when-case, but this didn't also help. Afterwards I copied the whole coding in a separate when-clause.
    Stil not successful. Factory calender is OK. The variables also work in a normal query but not in the APD - the result of the last workday is always '00000000'.
    Any ideas?
    Kind regards,
    Bettina

  • Technical name Change of variable

    Hi Experts - We have already created some Char variable which are widely used in bex Query.
    Now Client came up with New Variable Technical Naming Standard ,
    Is there any way by which i can change the technical name of the existing variables , without loosing any functionality.
    Thanks
    R

    Hi rohan1103,
       The technical names of variables in BEx are auto generated and can be changed as long as the variable has not been saved. Once it has been saved, the technical name cannot be changed.

  • BW Variables with same Technical Name

    I have just come across some variables in our BW system (3.0B) that have the same technical name. I dodn't think this was possible. Could someone please explain this.
    Thanks

    Hi Ian !
    This is possible.
    Take a look to the OSS Note 541024 'Duplicate query names in the BW system'.
    Hope it helps.
    Bye,
    Roberto

  • Question on WAD's "Variable Entry" screen values

    Hi,
    I've one Web Template Report contains "Variable Entry" screen.
    It has one entry for Plant.
    Also inside a report I'm having one DropDownList that is for  Plant only.
    My Requirement is:
    If I enter some "1000" as a input in Plant at Variable screen, that same "1000" should be passed inside the report. And that corresponding DropDownList should show the "1000" as the selected value.
    Now I'm getting "Show all values" as the default selected item.
    Kindly suggest to achive this requirement.
    Full points will be given.
    Thanks
    -Jay Jay

    Hi,
    1)If i didn't give any value in Variable Entry screen, in the result DropDownList shows "No data" in disabled mode.
    Ans. Since you have not checked "Display All Values", i think if you dont give any selection in the Variable Screen, the DropDown box will not be highlighted.
    2)The Selected plant Not only having Name and id, But also having all characteristics like, 1402,Pen,Business Partner: xxxxx, Distribution channel:xxx, etc.,
    Ans. Since we are reading from the Master Data, i think all these values will also be displayed.
    I still dont know if you are using WAD 3.5 or 7 ? Maybe we have better options in 7. You can try with different properties.
    Hope it helps.

  • Validate the variable entry

    Hi. VC guru's.
                   I would like know some information regarding
    Data Validation from you.
                     1) How to validate the variable entry in VC. Example: user should not be able to submit
    The queries without selecting a value for all fields.
                   and If he enters some invalid values, Then system  has to throw an error.
        For Example ::  If we give 'Material' name is invalid then the  system has to show a system message u201C invalid variable inputu201D .
                     Please tell me how to do it.
              I know that we can give it on validation in control properties. But I would like to know for which
                        field we have to give and what is the condition. Please provide me solution.
                   No need to worry about points.
                                                        Thanks and Regards

    Hi,
    You had asked To which filed we have to give and what condition Right?
    For which field you want to validate Enter the validation that Filed and The conditions are according to the your requirement.
    For Example.
    In a Input if you Enter any input which Ends with 5 then it should show some Error message
    then you have to Use "Ends with" Option as Condition and  "5"  as value , Message " Ends with 5"
    If you Upgrade to  EHP1 then you can get the Hard validation option which will stop the Execution Flow  if the validation validation fails
    Thanks
    Govindu

Maybe you are looking for

  • How do I make facetime fool screen on my macbook pro

    How do I make my facetime full screet on my macbook pro?

  • Wireless network has CONSTANT activity??​?

    T61 dual boot, XP Pro (working fine) and Windows 7 Pro (working fine all but annoying wireless issue).  All seems to be well...except for the small green wireless activity light CONSTANTLY flashing in my face.  I can't see to figure out what the cons

  • MM SUS Issues

    Hello Friends, We are implementing MM-SUS functionality and facing some issues. Could be very generic for those who have already worked on it so would need your help to fix these. 1. Once the PO is created and submitted to Supplier , he is able to se

  • Using iPhone 4 as an iTouch

    My iPhone 4 is de-activated but still has an AT&T sim card in it. I can access the internet through Safari and the Maps, Google, and Weather Apps work. The App Store, Pandora, iHeart Radio, iTunes, YouTube, etc. don't work. How do i connect to these

  • Importing on fla. file to another

    I've made an intro for my website which is flash. I've made it in another fla. file, so how can I import all of it to my originally file - or is their an easier way to integrate a intro on your site? The intro is supposed to go directly to my site, w