Variable value is not getting set in BEx / WAD

Hi,
We have a WAD report where we have selection on Comp Code which is restricted to a variable Var1. In the same WAD, a button group is used to execute a Planning Sequence, it has a filter for Comp Code which is restricted to a mandatory variable Var2.
Idea is unless the user selects a value for Comp Code in WAD selection screen(Var1), the button group to execute the Planning Sequence will not be visible. When this button group is visible and user clicks to execute the Planning Sequence, the value for Var2 is supposed to get the same value as Var1 since in the underlying BEx query of WAD, we have restricted Comp Code InfoObject with Var1 in Default Values region.
This was working absolutely fine in BW 7.3. But recently we upgraded to BW 7.4 and now the value for Var2 is not getting set if user selects the value for Var1.
Appreciate any help on this.
Note: The issue will resolve if we use the same variable in BEx query as well as the Planning Sequence, but this is not feasible in our case.
Thanks and Regards,
Shravan Marathe

Hi Suman,
As the issue came up with the latest BW 7.4 upgrade, we are looking for a work around may be implementation of Notes instead of going for an alternative.
Thanks and Regards,
Shravan Marathe

Similar Messages

Value is not getting set in messageTextInput item after PPR action

Hi everyone,
I have a page in which On selecting a value from a lov, the next messageTextInput item should be set to "dummy"(I am using setText() method for this). However its not getting set at that time . But if I apply the same code in click event of submitbutton, its getting set. i.e. some kind of page refresh event is required for this.
Plz suggest me the way of achieving this through PPR.
My code of controller is like this :
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
/* validation code for Preffered ordering Method LOV */
if (pageContext.isLovEvent())
String lovInputSourceId = pageContext.getLovInputSourceId();
if(lovInputSourceId.equals("PreferredOrderingMethodLOV"))
if(!selectedPrefferedOrderingMethod.matches("URL"))
String v_ani = pageContext.getParameter("AribaNetworkId");
if(!v_ani.matches("dummy") || v_ani.length()==0)
OAMessageTextInputBean aribaNetworkIDTextInputBean =
(OAMessageTextInputBean)webBean.findIndexedChildRecursive ("AribaNetworkId");
String dummy = "dummy";
aribaNetworkIDTextInputBean.setText(pageContext, dummy);//.setText(pageContext,"dummy"); // here its not getting set on page
String s = aribaNetworkIDTextInputBean.getText(pageContext); // however its showing "dummy"here
}

Hi,
OAMessageTextInputBean aribaNetworkIDTextInputBean =
(OAMessageTextInputBean)webBean.findIndexedChildRecursive ("AribaNetworkId");
String dummy = "dummy";
aribaNetworkIDTextInputBean.setText(pageContext, dummy);//.setText(pageContext,"dummy"); // here its not >getting set on page
String s = aribaNetworkIDTextInputBean.getText(pageContext); // however its showing "dummy"here
In processFormRequest() method we should not change bean properties.
Instead, achieve your requirement using
row.setAttribute() method.
-Anand

Value not getting set in NETValue field in Oppurtunities

Hi,
I have requirement to
make the "Net value" field in Products assignment block of new Oppurtunity editable.
method GET_I_NETVALUE.
rv_disabled = 'TRUE'.
endmethod.
by making rv_disabled = "FALSE" i am able to make it to editable, but i have an issue while entering some value to this field
for eg: if I give 10.00 and press enter its getting changed to 0.00. ( value is not getting set )
Any suggestion will be highly appreciated.
Regards,
Sijo...........
Edited by: sijokjohn85 on Aug 17, 2009 12:04 PM
Edited by: sijokjohn85 on Aug 17, 2009 9:18 PM
Edited by: sijokjohn85 on Aug 18, 2009 1:32 PM

Thread closed

Select-option value is not getting captured in at selection-screen on value

In Selection screen , we have Select-option and a parameter.
Based on the values given in Select-option, the values of Parameter should get populate.
To achieve this functionality,
I used At selection u2013screen on value request for <parameter> EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
But the Select-option values are not getting captured in this event,unless u press Enter key.
Is there any other way to achieve this functionality.
Please Guide me.

When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
Jonathan
data:
 l_repid type syrepid.
l_repid = sy-repid.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
 exporting
 dynpprog = l_repid
 dynpnr = '1000'
 dynprofield = 'S_FIELD-LOW' "Select options - low value
* etc

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Sy-batch is not getting set in background?

Hi Experts,
I have a scenario in which we are processing Inbound Idocs via standard FM to create EDI orders from the inbound Idoc data.
We have a requirement in which we implemented enhancement for a Popup screen for user to select a particular material from the list of materials shown on the screen. While background instead of popup we are determining the record progmatically vai customer exit(Function module exit).
The logic for foreground & background is perfectly fine but the problem is SY-BATCH value is not being set to "X" in background. So our background logic does not come into picture & IDOC fails in background.
Just to analyze this issue , I have tried to store value of sy-batch in some variable & then put an infinite loop to check in background debugging(VIA SM50) whether that variable contains an "X" or not, That variable was not set to "X".
Can anybody tell me is there any other way by which we can programatically distinguish whether something is running in foreground or in background?

Hi,
Also test the field sy-binpt ( Batch input ) which is set when a call transaction is made in the program. Usually the IDoc processing functions do a call transaction.
Also at times the IDoc processing function sets a variable and exports it to the memory so you migh want to check for "export" statements in the IDoc processing function as well and import it in your program and test that imported variable.
Br,
Advait

Context attributes Not getting set

Hi,
I have created a Webservice model from a WSDL file, created a service controller and bound the same to the model. I have also created a view and bound my view to my controller.
The problem I am facing right now is that certain fields of my request are not getting set.
The structure of my context is as shown below
Context
|-OrderWS
 |- RequestNode
 |-NodeA
 |-Item1
 |-Item2
 |-Item3
 |-NodeB
 |-ItemA
 |-ItemB
 |-ResponseNode
Even though I have created Item 1,Item2,Item 3 elements of Node A as input fields in my View, they cannot be edited, when I run my application.
Item1,Item2,Item3 have min occurance "0", max occurance "unbounded" , set in the WSDL file.
Is there any way by which I can set these values?
Why are only the Item1,2,3 fields not editable? (I have made sure that readonly =false,editable=true are set for these fields as they are for the other fields.)
-Ashwini.

Hello Ashwini,
If I understand you correctly, your problem is, the input fields that you've bound to a model node is
not open for editing. If yes then,I guess you are not setting the modelObject reference to the model node.
So use this code in the appropriate method (according to your requirement) to make the input fields editable.
 I<yourView>.IOrderWSElement el
 = wdContext.nodeOrderWSElement()
 .createOrderWSElementElement(new correspondingInterface());
 wdContext.nodeOrderWSElement().addElement(el);
 wdContext.nodeRequestNode().bind(new correspondingInterface());
 wdContext.nodeNodeA().bind(new correspondingStructure()());
If this is not the exact problem, then please give an eloborate picture of the scenario.
Bala

Con Gen : Token Values are not getting replaced

Hi All,
We are on E-Sourcing 5.0 and whenever we are trying to generate a contract from master agreement,
the token varibles are not getting replaced.
I looked into contract generation logs and found that the token values are null..but while creating the contract it is able to find the various tokens and token values..
Why token values are not getting replaced even though its value exists?
Please guide me...
Thanks and Regards,
Himanshu Sharma
Edited by: HImanshu Sharma on Apr 20, 2009 8:50 AM

Hi Kamalakar,
Thanks for replying..
1. Yes I am using standard tokens like <%Agreement.EffectiveDate%>,<%Agreement.VendorName%>..
2. I have checked that tokens have values..
3. Attributes are not hidden..
I am able to see values on the "Confirm contract document variable data" page but when I click next, it gives error in the "processing request" page.
By going through the contract gen web service I found that the values are not getting passed..
Can you please tell me what could be the reason..
Thanks and regards,
Himanshu Sharma
P.S. Please tell me how to upload file.

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

Replaced value is not getting relected in IDOC segment field

Hi,
Need your help for the below issue.
I am replacing the PO # with Delivery Doc # . But the replaced value is not getting reflected in the IDOC segment field(e1bp2017_gm_item_create-po_number.).
Function Module which I am using is IDOC_INPUT_MBGMCR as a copy.
Here is my code given below:
SELECT
            SINGLE vbeln
              INTO lx_vbeln
              FROM lips
             WHERE vgbel EQ e1bp2017_gm_item_create-po_number.
Move lx_vbeln TO e1bp2017_gm_item_create-po_number.
MOVE-CORRESPONDING e1bp2017_gm_item_create
               TO goodsmvt_item.
Then this is passed as TABLE in "BAPI_GOODSMVT_CREATE".
Please do the needful.

Hi Dheepa,
Check it in debug whether the filed is empty or having po#, when ur code is executed for the replacement. if it is empty, po# is populated after ur code. in this case you need to write the code in suitable place.
Reddy

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

Values are not getting updated in sales report

I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavan

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

you have encountered activation lock. Read iCloud: Activation Lock

Variable value is not getting set in BEx / WAD

Similar Messages

Maybe you are looking for