Variable Values in BEX Analyzer 3.5

Hello,
I have a query that has a user input variable for a country.
The first time I run the query I select GB.
I run the query again and select FR.
All fine so far.
The third time I run the query I notice that the variable value has changed back to GB. It has not remained as FR which was my last selection.
This happens for all variables that I am using. Is there a setting or offset that is awry?
Cheers,
Guy

Hello Durgesh,
Not quite what I had in mind as now I can't view any of my variables when refeshing the query.
I just need variable values to remain constant unless I change them but, I still want to view them before executing the query.
Guy

Similar Messages

  • How to set variable value in BEX analyzer for IP Layout

    Hi All,
       I have created a simple planning function to copy data from one account to another and I have used mandatory selection variable for Fiscal year /period. When I execute the planning function through Planning modeler I get the prompt for the variable and the planning functions execute without errors and return the values. But now when I design the Bex workbook using my Input ready query that have button to execute the planning function,I don't get the prompt for the mandatory selection variable. I need to set the variable vaule in design mode then the function return the values. Is there way to get the prompt for the variable when I choose to execute the planning function. Also is there a option in Web application designer too?
    Please let me know what I'm missing.
    Appreciate you help.
    regards,
    Balaji

    Hi,
    At the back of button specify the following parameter:-
    CMD    1        Execute_planning_function
    Planning_function_name  1   xyz
    Var_name     1    variable_name
    var_value      1    blank
    Can also refer to link below:-
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954?quicklink=index&overridelayout=true(can refer to page 20)
    http://www.sdn.sap.com/ddc5564a-337d-4cf9-a34e-2dab64df09be/finaldownload/downloadid-a61a6724ba8e7b7fbd9c5df9590ab50d/ddc5564a-337d-4cf9-a34e-2dab64df09be/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
    Hope it may help

  • How to enter multiple values in BEX Analyzer 7.0

    We are on 7.0.  I created a query in Query Designer with a variable type of Select Option.  When I execute the query in BEX Analyzer, how do I enter multiple selections?
    Thanks.
    Ryan

    Hi Ryan,
    You need to click on the button on the right of the variable (with a white square). In the box that pops up, choose your values. On the same screen, click the More>> button to see your selection and change the order if required.
    Hope this helps...

  • Problem with exit Variable in may BEx Analyzer Workbook

    Hello,
    I have created a workbook. In this workbook I use the 0CMONTH variable. I always want to get the previous month. For that I have the variable 0CMONTH-1 inserted in the query at default values in the query designer by 0calmonth.
    It will automatically deliver the previous month.
    When I put this query in the Bex Excel Anayzer Workbook, then comes the following message:
    Diagnosis
    In the query definition, the default values of characteristic
    [0CALMONTH]Calendar Year/Month are stored as variables. The system tires to fill
    these variables again from the last restrictions so that it can use them as
    default values. In this case, however, the restriction is so complex, that the
    variable values cannot be reconstructed from it.
    System Response
    Procedure
    Change the restrictions in the query result if necessary.
    Procedure for System Administration
    Kind Regards
    Kerim

    Hello,
    I can not find the SAP variable 0CMLMON in 0CALMONTH. I have OI_CMNTH, 0CMONTH ...
    Do I have to register somewhere?
    regards
    Kerim

  • Display interval variables value in BeX

    Hello Gurus,
    I am using Bex BI 7.0 to build my reports. I can't see how to display the value of variable values I have selected in the beginning of the query.
    To clarify with an example I want to choose the period from January to March and to display this selection in the report I have built.
    The only way I was thinking about was to create a Text variable to display in the title of the query but I noticed it displays only single value and don't manage interval like these.
    Is there any other tricks?
    Thanks in advance
    Massimo

    Very good Jaya. I have solved my problem and I rewarded it. The only problem that still remains with this feature is that in a query I use a filtered key figure to obtain cumulated value for period. The "from period" is fixed (january) and the "to period" is given by my period variable.
    I noticed that in this case the text variable return me no value. Is there any another trick to manage text variable in filtered key figure like that?
    Regars
    Massimo

  • User Entry in variable screen in BEX analyzer

    If we open a query in the Bex analyzer (BI 7.0), it seems only possible for us to enter variables in the dialog screen after the pushbuttons Ctrl + K for each variable. Is it possible to change the default setting in the BEx analyser variable screen, so that the variables are ready for input (without the ctrl + k)?
    Looking for any help on this.
    Thanks,
    Joe

    Hi Joe,
    We recently went though the same issue. You need to install the last patch for SAP GUI (Patch 4) and the BEx 7.0 Front End (Patch 2). After you install them all variables will be ready for input without the need of using CRTL + K. We got the installer files from our basis team the names are GUI710_4-10002995.EXE and BI710SP02P_201-10004472.EXE.
    I will work for sure !!!
    Regards,
    Raimundo Alvarez

  • BEx broadcaster precalculation variable value shows BEx web analyser iview

    Hi Experts,
    I'm getting this very weird problem on BEx Broadcaster in BI production portal. In BEx Broadcaster, the general precalculation tab, variable value create /change link when clicked show BEx Web Analyser iview instead of variable entry screen.
    This was working fine until two days back when this problem started showing up.
    Users are not able to create new broadcast settings in the production environment nor able to change variables of existing setting which is casuing lot of problem.
    If anyone has faced this issue before please let me know how can this be resolved? Also it will be greatly appreciated if someone can explain how the link is calling the variable entry screen.
    Thanks & Regards,
    Seema Rane

    Hi Experts,
    Can anyone please guide?? We are facing this issue on Production portal and affecting the functaionality.
    Any inputs are appreciated.
    Regards,
    Seema Rane

  • Issue with Data Provider name in variable screen for BEx Analyzer

    Hello all,
    We got an issue with Data Provider name in Variable screen in BEx Analayzer.
    We want to change the DataProvider name there to Description of the report instead of its Technical name.
    Any inputs are appreciated.
    Thanks
    Kumar

    You have to create a workbook to do this.
    Refresh your query/report. In Bex analyser, there is one toolbar named BEx design toolbox, If you are not able to see it in analyser, right click on the toolbar space of BEx analyser and click on BEx design toolbox. Here, goto to design mode, by clicking on a sysbol like 'A'. after that place the curser where you want to see the Query description. and click on insert text (T) in BEx toolbox. click on it and check "Query description" in constant tab. in the general tab you need to assign a dataprovider, for that assign your query name in workbook settings (in Bex design toolbox). also check the "display caption" in general tab.
    Pravender

  • Values in Bex Analyzer are too big

    Hi all,
    I have upgarded office 2003 to 2007. And when I run a query in bex analyzer some coulmns are mulltiplied by 1000 and some others multiplied by 10 power 14. If I run same query in WEB I get correct result. Also my coullegue get correct result in Bex with excel 2003.
    Do you have any idea what can be wrong?
    regards,
    BB

    Hello,
    Install SAP GUI 7.10 with the latest patches.
    Regards,
    Jorge Diogo

  • Not to filter values in Bex Analyzer

    I am using a selection on a particular variable in Bex. Now in the output if I enter the value 123 for the variable it shows records only related to 123.
    Whereas I need to show some records which dont have a value equal 123 alongwith 123.
    basically all the records which are present in the E_T_DATA.
    Thx

    Hi Raja Sekhar,
    If i enter variable 123 or any other value, i need it as a reference for some calculations and data which i get includes this value as well as other values.
    So since i have a selection on this variable only 123 shows up in the output, rest of the values getting filtered out.
    Is it clear now?
    Right what Mahesh has suggested dummy variable seems to the way to go forward, as if i use using text variable i am not allowed to modify any customer exits.
    But plz help if u can think of some alternatives
    Regards,
    Nitin

  • Authorization Variable values in BEX.

    Hi all,
    I have a report with an authorization object (for example 0COUNTRY) restricted to an authorization variable.
    The object restricts the report according to the user's role. I want a user, with multiple country authorization, to be able to run the report on a few countries that he is authorized to see. For example he is authorized to see US DE FR & CH, and wants to run the report on DE & FR.
    So, I created the authorization variable "Ready for Input", but now when the user runs the report he <b>can insert</b> other values but when he click on the options he can choose from (F4),<b>he can't see the texts</b> (DE - Germany, FR - France) and he gets the message:
    <b>"BRAIN655 - No values available or not authorized to display"</b>
    Full points for the answer promised.
    Many thanks, Yaniv.

    I've done these steps when I createted this object long ago. I have no problem with the authorization itself. it works great.
    You are right, the selection option window shows the values US DE FR & CH, but I want the user to see the description also (when pressing F4) so he will be able to tell which countries to choose . that is when the message pops up.
    <b>It is like the user does not have the authorization to view the 0COUNTRY values and their texts</b>.

  • BEx Analyzer Not showing report result in canceling "Change variable Icon"

    Hi Experts,
    Do we have any settings in BEx Analyzer for retrive the Result set even after I click 'Change variable Icon' in Toolbar and cancel the variable pop-up window??
    Eg: My query Result is displayed in Analyzer selecting some vaues in Selection screen.And when I click the Change Variable Icon from 'Analyzer Toolbar' its showing me 'Select values for variable' window.If I select the cancel button in it, then Query result becom blank showing the message "There are variables; change variable values". Do Analyzer having an option or settings to keep the result even if i cancel the variable selection from "change variable icon".
    Thanx in advance..

    Sari-
    If SAP provides such a function, I have not found it. The way I understand it., the change variable value initiates the OLAP back end. This clears the Presentation Manager front end, and clears the 'results' that are displayed on your workbook. If you cancel the OLAP run, the front end clear still executes.
    HOWEVER... if you turn OFF Automatic Refresh before clicking on Change Variable Values and then clicking on Cancel, the presentation manager will not write any changes to your workbook. So that is your best solution.

  • Drop-Down-Box (F4 Input Help) for formula variable in BEx Analyzer (BI 7.0)

    Hi Gurus,
    is it possible to get a drop down box for a ready for input formula variable in the BEx Analyzer (not BEx Web!)?
    We want to let the users choose scaling factors 1, 1000 or 1000000 (implemented via this formula variable). In the settings of the formula variable you can only choose a default value but there seems to be no option to provide all three factors in a drop down box like the ones for characteristic value variables.
    We could prevent other entries in the variable pop up via customer exit (i_step 3) but the business is wishing an F4 input help like the ones for characteristic values.
    Thanks for your help,
    Marco

    Hi Macro,
    Its not possible to get drop down box for a ready for input formula variable. Because it is possible only for characterstic value variables but not formula variable.u donnot get any drop down box like ready for input for formula variable.
    Regards,
    Premalatha.C

  • BEx  Analyzer 3.x after 2004S Upgrade - Variable Screen

    The variable screen has changed when using BEx Analyzer 3.x after upgrading to 2004S.  Is there an option to go back to the original version?  We are doing a "technical upgrade only" this weekend to our production system and did not want to impact our users in any way at this time.  There was a thread that started out asking about this issue but then switched to discussions about the Query Designer and the variable screen question was never answered.
    Thank you for your help.

    Yes, I can access RRMX.  However our users cannot.  They log on through Citrix directly to BEx Analyzer 3.x.  When I use transaction RRMX, it takes me to BEx Analyzer 2004S. 
    Is there any way for our users to access the old variable screen using BEx Analyzer 3.x?  And if not, is there any documentation anywhere on the new variable screen that is being used for 3.x after technically upgrading to 2004S?
    Thank you -
    Ann

  • User Variables values are not showing in Bex analyzer

    Dear Friends,
    I created a report in Bex analyzer ( Excel).
    Now i want to show the variables values in the report.
    i put text item there and click on it but in filter tab there is no variable is exist.
    Any help will be highly appricated.
    Regards
    Naeem

    dear i know how to display the variable values.
    But unfortunatilly there is nothing appear in filter tab.
    my variables are not in filter tab its empty.
    i already choose the data provider.
    regards
    Malik

Maybe you are looking for