Variables for Closing Movie under Quiz Preferences

I'd like to know whether there are certain
variables/properties or preferences for closing a movie under Quiz
Preferences in Captivate when the movie needs to be place in a
Lectora Course and published to a LMS in order for it work
properly.

Hi Tim,
The options which you have mentioned are purposefully not exported and then consequently imported. If you want these options to be a part of preference options export/import workflow then I would advise you to submit an enhancement request.
But you try this workaround:
1. Open project 1 which has your quiz settings, which you want to apply on all the projects.
2. Import all the slides of project 2 in project 1.
3. Delete the slides of project 1 and save the project.
Manish
http://blogs.adobe.com/captivate

Similar Messages

I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

Selection variable for next month in RFPERIOD_OPEN in closing cockpit

Hi,
we would like to use RFPERIOD_OPEN in the closing cockpit in order to open the next period on D-10 automatically. I would like to use the selection variables of the closing cockpit in the program variant in order to avoid unnecessary variant maintenance every month.
Unfortunately I cannot find a variable for the next month. There is only SAP_FAST_CLOSE_PERIOD_P. Do you know if it is possible to base a calculation logic to derive the next period from SAP_FAST_CLOSE_PERIOD_P.
Thanks!
Kind regards,
Mariya

Thanks! I checked it, but the appearance of months and order is okay in T247.
Any other ideas?
I thought I read somewhere that this is a bug but can´t remember where I found that bug hint.

Quiz Will Not Allow for Backward Movement

I have a short 10 page presentation, on page 5 I have a single question. It is optional, I have it marked for backward movement, it does not show a score afterwards. When I publish, I can work my way through all pages, however, when I go backwards, I get stuck at the quiz screen, it will not allow me to go back to pages prior to the quiz. Any suggestions?

Hi kirkisbetter,
As per my understanding , you are facing the following 2 issues :
Issue 1 : You are not able to see the score (Result Slide)at the end
Issue 2 : Backward movement from the quiz slide.
We would like to suugest you to follow the steps as mentioned below to resolve the above issues :
Suggestion for Issue 1:
Once you delete the result slide from the presentation, then for the result slide to reappear , please go to Quiz -> Manage -> Select the Quiz. The Quiz Settings dialog appears. Make sure the "Show Score at the end of the quiz" option is enabled and then click on OK.
You can now see the result slide in your presentation.
Suggestion for Issue 2:
Once you come to the Quiz slide then you come to the quiz pane in place of the outline pane. In the quiz pane , you can see slides which are presnet after the question slide.
In order to go backwards from question slide, you need to use the backward button available in the playbar or use the Thumb tab in the right side panel. Once you browse to one slide before the question slide,then you can again see the Outline tab in your right slide pane which lists all the slides available in the presenation.
We hope this resolves the issue.
If you are still facing the problem then please do let us know with the exact steps and if possible please share the project file which causes this issue.
Thanks,
Subhransu
Adobe Captivate and Preseneter Team

Preview/Marquee art for Movies under FR 2.x?

Hi -
I'm thinking about moving to 10.5 but I've run into a problem with FrontRow during the tests. Some background; I'm currently using FR under 10.4.11 as a media center in my house. I have several VIDEO_TS coded movies that I have under FrontRow in my Movies directory. Under 10.4 I used a tool called DVDAssist that allowed me to create a Quicktime movie (short, maybe 10 frames) that contained a splash screen/marquee display for the film. I then created a link to this movie and put the link in my home Movies directory. When I ran FR, it would display the image in the clip along with the name of the movie. If I selected the Movie, DVDAssist would sneak in and convince DVD Player to open the VIDEO_TS .ifo and play the movie. Life was good under 10.4.
This trick does not work under 10.5, but I'm told it shouldn't. FrontRow 2.0 supports the direct play of VIDEO_TS directories; all I need do is create a link to the appropriately named directory ("My Great DVD" for example) and put it in my Movies folder. FR does the rest.
While it's true that this works, I lose the splash screen art for the movie. I've tried pasting the art into the Preview for the folder, the link, and even the VIDEO_TS folder with no success.
Does anyone know how to convince FR to display a still next to the title? It worked in 10.4 but I'm darned if I can get the same thing out of 10.5. If I put a link to my old Quicktime stills into the Movies directory, it shows up fine under FR, but when I select it to play FR puts DVD Player in the background and I have to mouse to the dock to bring up the video, which is less than a good end user experience.
Any help would be appreciated.

Douglas McLaughlin wrote:
Welcome to the Apple Discussions!
You shouldn't include the quotes in the name of the file. John Lockwood has a good example of the appropriate layout of the files & folders here:
http://discussions.apple.com/thread.jspa?threadID=1626613
-Doug
Thanks for the welcome Doug, my paltry 1 post looks a little meek next to your close on 11,000 posts, but hey! you have to start someplace right. There is a wealth of information here, and will search accordingly. I did get it to work in Front Row, so thanks again for the link. John made it look easy when laid out like that. My mistake was leaving in the quotes. Just had to trial and error the right spot.
Regards
Mike
PS - My first ever Mac and I am loving the experience of finding out all the tricks.

Lack of support for rented movies

Last night I rented a movie from the AppleTV. It appeared to download okay. But when I tried to play it, all I got was a white screen.
I immediately tried to call Apple support. After a few minutes with the voice response system, it told me they were closed – call tomorrow. Why didn’t the voice response system say that at the beginning?
I called early next morning (6:30am PDT). After navigating through the voice response system, I got a technician who asked for my AppleTV serial number and verified that I had an AppleCare agreement. After about 20 min of research, he told me to unplug the AppleTV, wait 30 sec., then plug it back in and see if that fixes the problem. Well, it did – I could view the movie. He told me the problem is due to the way the firmware handles an HDMI connection – but only with rented movies. What??? The technician then said “good, we fixed the problem you’re good to go.”
I said not so fast – and asked how Apple was going to compensate me for going through the motions of downloading a rented movie, trying to troubleshoot and calling in (only to be told I was SOL), spending 45 min the next morning, and never being able to see the movie due to an Apple hardware problem. The technician put me on the phone with his “supervisor” - again a 5 min wait on hold.
The supervisor asked what was the problem – since I still had 12 more hours to watch the movie (we were talking at 6:30am). Then she had the audacity to say there wasn’t a “technical problem” since un-plugging the AppleTV reset it and I could now see the movie. I told her that I wanted to watch the movie last night and there most certainly was a technical problem at that time - i.e., white screen. She reluctantly said that she would “try” to get me a refund for the movie.
I then asked her how was I suppose to get support in real-time for AppleTV download issues? She again reiterated that their hours are 6-6 and they don’t accept support calls after 6pm PDT. She asked why I didn’t go on-line and seek help on the Apple Web site. Excuse me? I was sitting down to dinner with my family who wanted to watch the rented movie. Going off to a computer to research an Apple hardware problem wouldn’t have been politically correct under the circumstances.
I also told her that the technician wouldn’t talk to me without evidence of a AppleCare support agreement on the AppleTV. Hey, a rented movie wouldn’t play. Why do I need an Apple support agreement to merely get what I paid for? I asked, what if I had just purchased the AppleTV, how would I solve this sort of problem? She said that I could have paid a one time $49 support charge to get someone to tell me to unplug the AppleTV. Mind you, that’s a $49 charge to see a $4.99 movie due to a known problem with Apple’s firmware. Unbelievable!
Given the frustration of not getting the movie to play (at dinner time), no realistic support to fix the problem, and the baffling conversation with Apple’s insensitive support manager - all I was offered is someone will “try” to get me a refund.
Okay, this won’t happen to me again. Because I won’t be renting or downloading movies from Apple’s service. Sorry I bought the AppleTV - wonder if I can get a refund for it?

I agree the OP could not have known to restart the device but I do rather think their expectations after receiving help were unrealistic.
From the Applecare diagnosis it was an issue with the tv that led to the OP being unable to watch their movie when they wanted, not the rental, and technically one would need warranty or Applecare to receive phone based support for the tv.
I accept it was unfortunate the OP's experience wasn't as it should have been and that it was made a little worse by not being able to speak to someone out of hours, although I do see the need for staff to verify that Applecare has been purchased with each caller.
At the end of the day, the OP's issue was resolved and their was no financial loss to the OP. These things happen, it's unreasonable to expect, or fulminate over not getting, some form of compensation, (although it wouldn't be unreasonable to ask for the rental for free without expectation). What sort of compensation does one thing you would get from Canon if your video camera broke down in the middle of filming your sons graduation day ceremony.

Importing Quiz Preferences

Hello,
We are working on a project that has many Captivate projects. I am trying to change the quiz preferences in the Captivate projects. I do this by changing the quiz preferences then exporting the preferences to a CPR file. Then, I import the CPR file into another Captivate project.
The problem is that not all of the preferences are being imported. I enabled reporting for the project. That setting seems to import into other projects. However, I also changed options such as:
Slide View Completion percentage
Under Settings, the Required selection
Under Pass or Fail, allow user Infinite attempts
None of these preferences are being imported into the new project.
Any ideas on how to do this? (Besides manually changing over 100 project files.)
We are using Captivate 4 and Windows XP.
Thanks,
Tim

Hi Tim,
The options which you have mentioned are purposefully not exported and then consequently imported. If you want these options to be a part of preference options export/import workflow then I would advise you to submit an enhancement request.
But you try this workaround:
1. Open project 1 which has your quiz settings, which you want to apply on all the projects.
2. Import all the slides of project 2 in project 1.
3. Delete the slides of project 1 and save the project.
Manish
http://blogs.adobe.com/captivate

How do I create an automator variable for a path that includes a date?

I like to use Image Capture to scan documents into a hierarchy of folders under my ~/Documents directory that are organized by year and document type. For example, I have
~/Documents/archives/2011
     /Misc
     /Utilities
and
~/Documents/archives/2012
     /Misc
     /Utilities
for archiving miscellaneous docs and utilities bills. Now, switching folders in Image Capture is annoying so I want to use the Automator support built into that app to direct the scanned images to ~/Documents/archives/<Current Year>/Misc or ~/Documents/archives/<Current Year>/Utilities. I was able to do this with separate Automator workflows, each with a hard-coded path to the destination folder. For example,
What I would like to do is use an Automator variable to dynamically determine ~/Documents/archives/<Current Year>/Misc. I see variables for Home, Documents, and Current Year.   However, when I try to create a new path variable it only lets me choose a full path to a Finder folder. How do I combine Documents and Current Year variables with the "archives" and "Misc" folder names to create a new path variable?

Well now, you went and made me learn something today. In the Variables Library, under Utilities, is a variable named AppleScript. You can put a small script into this that evaluates to your path, for example:
((((path to documents folder) as text) & "archives:" & (year of (current date)) as text) & ":Utilities") as alias
If the script evaluates to a proper path, it can be used wherever any other path can - you can experiment by looking at the results of a Get Value of Variable action.

HT201272 I have purchased a movie and elected to download later; when I go to the iTunes store, it shows where it is purchased yet when I go to the movie it ask for it to be purchased, will I be charged twice for the movie I have not downloaded yet?

I purchased the movie "Black Nativity" at midnight and selected to download later; it shows that the movie has been charged in my account for billing, however; I when I go to download the movie, it ask for it to be purchased versus download. I would like to know if I will be charged again for the movie upon selecting purchase movie? I would like some direction as for how to download the movie that I already purchased.

Clicking on its purchase price again may result in you being charged again. Does the Store > Check For Available Downloads menu option download it
Or does it show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage for downloading

Automatic TO Creation for 321 movement (WM and QM integration)

Dear experts,
Can anybody guide for how to create auto transfer orders with reference to posting change number for 321 movement document?
Best Regards,
Anand Rao

This has to be done in WM. Activate the automatic TO creation for the releavnt Inventory/warehouse movement . Its under interafces - inventory management in the WM component in config.
Thanks,
Ram

Report MB5B for selected movement types

Dear All,
When I am executing report for selected movement types , system givivng me message below " Movment type is reset"
After continuing that Movement type field turns BLANK, and report is executed with considering all movement types.
If there is a way for executing MB5B report for selected movement types, please suggest.
Thanx..

Hai,
1.The MB5B report will show the stock on posting date with all movements like Goods recipt from Purchase, production order, stock transport order, & goods issue due to consumption posting, stock transfers & transfer posting.
2. This is designed to see the Opening balane+Goods receipt - goods issue = closing balance.
3.You can't take report only for particulat movement type.
4.If u want to get the details as per the movement type, then use MB51 report.

Functon module for closing stock

Hi All,
Is there any function module is there to findout closing stock by taking opening stock .
Thanks&regds,
Sree.

I have one report for closing and opening stock go through it
*& Report Z_OPEN_CLOSE                                                *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
        MSEG, " Material Document: Item Data
        MARA,
        MARD,
        S031,
        EKKO,
        EKPO,
        LIKP,
        MAKT,
        J_1IWRKCUS,
        T001W,
        WB2_V_MKPF_MSEG2,
        MMIM_REP_PRINT,
        YW2_STKMOVEMENTS,
        YPLNT,
        MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
         PPLNT LIKE YPLNT-PPLNT,
         WPLNT LIKE YPLNT-WPLNT,
      END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        MJAHR LIKE MKPF-MJAHR,
        BUDAT LIKE MKPF-BUDAT,
        VGART LIKE MKPF-VGART,
        BWART LIKE MSEG-BWART,
        MATNR LIKE MSEG-MATNR,
        WERKS LIKE MSEG-WERKS,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        KUNNR LIKE MSEG-KUNNR,
        ZEILE LIKE MSEG-ZEILE,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
        MATNR1 LIKE MSEG-MATNR,
      END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
       WERKS LIKE MARDH-WERKS,
       MEINS LIKE MARA-MEINS,
       MATNR LIKE MARDH-MATNR,
       LGORT LIKE MARDH-LGORT,
       LABST LIKE MARDH-LABST,
       LFGJA LIKE MARDH-LFGJA, "Added -MB
       LFMON LIKE MARDH-LFMON, "Added -MB
       PERIO(6),
       INSME LIKE MARDH-LABST,
       EINME LIKE MARDH-LABST,
       SPEME LIKE MARDH-LABST,
       RETME LIKE MARDH-LABST,
       O_STK LIKE MARDH-LABST, " Opening Stock
       C_STK LIKE MARDH-LABST, " Closing Stock
      END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
       WERKS LIKE MARD-WERKS,
       MATNR LIKE MARD-MATNR,
       LGORT LIKE MARD-LGORT,
       LABST LIKE MARD-LABST,
       INSME LIKE MARD-LABST,
       MEINS LIKE MARA-MEINS,
       EINME LIKE MARD-LABST,
       SPEME LIKE MARD-LABST,
       RETME LIKE MARD-LABST,
      END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        WERKS LIKE MSEG-WERKS,
        MATNR LIKE MSEG-MATNR,
        BUDAT LIKE MKPF-BUDAT,
        BWART LIKE MSEG-BWART,
        MJAHR LIKE MKPF-MJAHR,
        VGART LIKE MKPF-VGART,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
      END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
       WERKS LIKE MSEG-WERKS,
       MATNR LIKE MSEG-MATNR,
       BUDAT LIKE MKPF-BUDAT,
       BWART LIKE MSEG-BWART,
       MJAHR LIKE MKPF-MJAHR,
       VGART LIKE MKPF-VGART,
       LGORT LIKE MSEG-LGORT,
       MENGE LIKE MSEG-MENGE,
       MEINS LIKE MSEG-MEINS,
       XAUTO LIKE MSEG-XAUTO,
     END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       LGORT LIKE MSEG-LGORT, " Storage Location
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TLOSS LIKE MARDH-LABST, " Total Loss
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        TRFSTK LIKE MARDH-LABST, "Transfer stock
        MENGE LIKE MSEG-MENGE,
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        BUDAT LIKE MKPF-BUDAT, " Posting Date
        MTART LIKE MARA-MTART, " Material Type
        SPMON LIKE S031-SPMON, " Month
        MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
       END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        MTART LIKE MARA-MTART, " Material Type
        MAKTX LIKE MAKT-MAKTX, " Description
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
       MATNR TYPE MARA-MATNR,
       MTART TYPE MARA-MTART,
       MEINS LIKE MARA-MEINS,
       LABST TYPE MARD-LABST,
       MAKTX LIKE MAKT-MAKTX,
      END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
       BWART LIKE MSEG-BWART,
       SHKZG LIKE MSEG-SHKZG,
       VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
      END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
       MEINS LIKE MSEG-MEINS,
       O_STK LIKE MARDH-LABST, " opening stock
       TRECEP LIKE MARDH-LABST, " total receipts
       PRODU LIKE MARDH-LABST, " Net Receipts - Production
       RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
       SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
       TDISP LIKE MARDH-LABST, " total dispatches
       CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
       OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
       TRFSTK LIKE MARDH-LABST, "Material Transfer stock
       TRLOSS LIKE MARDH-LABST, " Transit Loss
       WHLOSS LIKE MARDH-LABST, " Warehouse Loss
       TLOSS LIKE MARDH-LABST, " Total Loss
       C_STK LIKE MARDH-LABST, " Closing Stock
       OTHADJ LIKE MARDH-LABST,
       MONTH(8) ,
      END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                  WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
      FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
      FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
      FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
      FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
      FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
      FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                WITH HEADER LINE INITIAL SIZE 0,
      FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
      GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
      FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
             WITH HEADER LINE INITIAL SIZE 0,
       FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
              KEY WITH HEADER LINE INITIAL SIZE 0,
       G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
       ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
      MON(2),
      FYEAR1(4),
      MON1(2),
      OBAL LIKE MARD-LABST,
      CBAL LIKE MARD-LABST,
      INDEX TYPE I,
      COUNT,
      COUNT1 TYPE I,
      O_STK TYPE P DECIMALS 3,
      C_STK TYPE P DECIMALS 3,
      V_MJAHR LIKE MKPF-MJAHR,
      MONTHS TYPE TRFF_TYPE_DEC_6_5,
      MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
      ALV_VARIANT LIKE DISVARIANT,
      ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
      ALV_REPID LIKE SY-REPID,
      ALV_PRINT TYPE SLIS_PRINT_ALV,
      ALV_DETAIL_FUNC(30),
      ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
      ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
                  S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
                  S_MBLNR FOR MKPF-MBLNR,
                  S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
      PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
              M1 RADIOBUTTON GROUP P1,
              Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
    MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
    IF S_BUDAT-HIGH IS INITIAL.
      S_BUDAT-HIGH = S_BUDAT-LOW.
      MODIFY S_BUDAT.
    ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
    EXPORTING
       I_DATE_FROM = IDATE-LOW
       I_DATE_TO = IDATE-HIGH
   IMPORTING
E_DAYS =
      E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
    MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
    R_BUDAT-LOW = S_BUDAT-LOW.
    APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
    R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
    I = I + 1.
    R_BUDAT-LOW+6(2) = '01'.
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
       EXPORTING
         DAY_IN = R_BUDAT-LOW
       IMPORTING
         LAST_DAY_OF_MONTH = R_BUDAT-HIGH
      EXCEPTIONS
        DAY_IN_NO_DATE = 1
        OTHERS = 2
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
      R_BUDAT-LOW = S_BUDAT-LOW.
      MODIFY R_BUDAT.
    ENDIF.
    IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      MODIFY R_BUDAT.
    ENDIF.
For Summary on 26.4.05.
    IF Y1 = 'X'.
      CLEAR R_BUDAT.
      REFRESH R_BUDAT.
      R_BUDAT-LOW = S_BUDAT-LOW.
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      APPEND R_BUDAT.
      CLEAR R_BUDAT.
    ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = '12'.
    FYEAR = FYEAR - 1.
ELSE.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = MON - 1.
    FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
    IF Y1 = 'X'.
      LOOP AT S_BUDAT.
        S_BUDAT1-SIGN = 'I'.
        S_BUDAT1-OPTION = 'NB'.
        S_BUDAT1-LOW = S_BUDAT-LOW.
        S_BUDAT1-HIGH = S_BUDAT-HIGH.
        APPEND S_BUDAT1.
        CLEAR S_BUDAT1.
      ENDLOOP.
    ENDIF.
    IMKPFT[] = I_MKPF[].
    IMKPFT2[] = I_MKPF[].
    IMARDT[] = I_MARD[].
    IMARDHT[] = I_MARDH[].
    PERFORM MONTH_WISE.
    PERFORM PROCESS_MOVEMENTS.
    PERFORM CALCULATE_OPENING_STOCK.
    PERFORM UPDATE_NON_TRANSACTION_ITMS.
    PERFORM DELETE_EMPTY_RECORDS.
    CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
    REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
          INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
         MF_MONAT LIKE ISELLIST-MONTH,
         MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME               = MF_HLP_REPID
        DYNUMB               = SY-DYNNR
      TABLES
        DYNPFIELDS           = MF_DYNPFIELDS
      EXCEPTIONS
        INVALID_ABAPWORKAREA = 01
        INVALID_DYNPROFIELD = 02
        INVALID_DYNPRONAME   = 03
        INVALID_DYNPRONUMMER = 04
        INVALID_REQUEST      = 05
        NO_FIELDDESCRIPTION = 06
        UNDEFIND_ERROR       = 07.
    IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
      MF_HLP_REPID = 'SAPLALDB'.
    ELSE.
      READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
      TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
      EXIT.
    ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
    CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
      EXPORTING
        INPUT         = MF_DYNPFIELDS-FIELDVALUE
      IMPORTING
        OUTPUT        = MF_MONAT
      EXCEPTIONS
        ERROR_MESSAGE = 1.
    IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
      MF_MONAT = SY-DATLO(6).
    ENDIF.
    CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
      EXPORTING
        ACTUAL_MONTH               = MF_MONAT
      IMPORTING
        SELECTED_MONTH             = MF_MONAT
        RETURN_CODE                = MF_RETURNCODE
      EXCEPTIONS
        FACTORY_CALENDAR_NOT_FOUND = 01
        HOLIDAY_CALENDAR_NOT_FOUND = 02
        MONTH_NOT_FOUND            = 03.
    IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
      CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
        EXPORTING
          INPUT = MF_MONAT
        IMPORTING
          OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
      COLLECT MF_DYNPFIELDS.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          DYNAME               = MF_HLP_REPID
          DYNUMB               = SY-DYNNR
        TABLES
          DYNPFIELDS           = MF_DYNPFIELDS
        EXCEPTIONS
          INVALID_ABAPWORKAREA = 01
          INVALID_DYNPROFIELD = 02
          INVALID_DYNPRONAME   = 03
          INVALID_DYNPRONUMMER = 04
          INVALID_REQUEST      = 05
          NO_FIELDDESCRIPTION = 06
          UNDEFIND_ERROR       = 07. "<<== note 148804
    ENDIF.
ENDIF.
ENDFORM.                                                    "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
    CLEAR S_BUDAT.
    REFRESH S_BUDAT.
    S_BUDAT-SIGN = 'I'.
    S_BUDAT-OPTION = 'BT'.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
    APPEND S_BUDAT.
ELSE.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
    MESSAGE I041 WITH TEXT-005.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
    CLEAR S_BUDAT.
    LOOP AT S_BUDAT.
      CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
      S_BUDAT-LOW+0(4) INTO LOW.
      CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
      S_BUDAT-HIGH+0(4) INTO HIGH.
      CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
      FHEADER-TYP = 'H'.
      FHEADER-INFO = V_FIN1.
      APPEND FHEADER.
      CLEAR FHEADER.
    ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_TOPOFPAGE'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_USER_COMMAND'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.

I need to delete a variable containing a movie clip class and recreate it with a different movie clip class

Hello,
I am creating a program that is going to help students learn to read. In my project are pages of text with each word having a button that when pressed will display a movieclip presentation about that word (its pronounciation and spelling etc..). In the project I am working on now I have over 450 unique presentations of words to deal with. I don't want to have all of these hundreds of movie clips on the stage and tell them one at a time to stop and rewind and then have one play each time a word button is pressed. That seems to be very inefficient to me. So I want to do this with some code in Actionscript 3.
I know I can dynamically add movieclips to the stage using addChild(movieclipname) and remove them using removeChild(movieclipname) but there is a problem. I have hundreds of unique movieclips and I don't want to have to manage hundreds of variables containing the indivudual movieclip instancess. It is a real pain having to figure out what instance is still on the stage before i delete it.
In Adobe Director all I have to do is this:
on mousedown me
     sprite(me.spritenum).member = member("somenewmember:)
end
and that was it
But if I do this in actionscript 3:
removeChild(some_mc)
some_mc still exists in memory. And I have to know exactly what variable it is to remove or else the movie will fail with an error. If I try to be brutish about it and try to implicitly remove all 450 movieclip instance variables from the stage I will get at least 449 errors.
What I want to do is this:
removeChild(some_mc)
some_mc = void //or //delete some_mc
var some_mc:MovieClip = new someother_mc();
addChild(some_mc)
but this doesn't work
How am I going to remove one of 450 movie clips and add a new totally different movie clip without the code knowing exactly what the last movie clip was? I suppose if could remove a child from the stage based on a string name then I could hold that name in a variable for later disposal.Can I do this?
Thanks for any help you can give me. I am new to actionscript.

Hey I think I may have a solution:
//begin code
var myMC:MovieClip = new ball();
var starMC:MovieClip = new star();
var youpresseeditMC:MovieClip = new youpresseedit();
starMC.name = "star";
myMC.name = "ball";
youpresseeditMC.name = "youpresseedit"
addChild(myMC);
box.addEventListener(MouseEvent.MOUSE_DOWN, replaceball);
press_BTN.addEventListener(MouseEvent.MOUSE_DOWN, replaceballwithtext);
function replaceball(event:MouseEvent):void {
    trace(myMC.name)
    removeChild(myMC);
    myMC = starMC;
    addChild(myMC);
    trace(myMC.name)
function replaceballwithtext(event:MouseEvent):void {
    trace(myMC.name)
    removeChild(myMC);
    myMC = youpresseeditMC;
    addChild(myMC);
    trace(myMC.name)
///end code
This works. I see the ball object replaced by the star and I am able to do this by manipulating just myMC. Is there anything I should be concerned with in this approach?
Thanks for your help

Error while opening Workbook:variables for characteristic cannot be process

Hi all,
When I try to open the workbook for a particular query, I am getting the following error. Kindly suggest me in rectifying this information message.
"Variables for characteristic [ZDVCODE]Dealer code cannot be processed"
Regards,
Steve

I am encountering a very similar warning, so this may shed some light on the matter. I have a Web Application that runs just fine when it is filtered only by Calendar Day. However, when I filter the Web Application by Calendar Day and Material Group both, then I get a warning at the top of the output that says "Variables for characteristic [0CALDAY]Calendar Day cannot be processed".
So, at least in my case, the variable isn't deleted, and it actually works just fine buy will spit out this warning under these circumstances.
-Owen

"No iPod Connected" in iTunes under Edit - Preferences

I bought this 20gb clickwheel iPod from a friend as a Christmas gift for my boyfriend... I'm trying to install it on my PC first so I can put some songs on it so it is ready to go when I give it to him.
I do not have the original software that came with it when it was new.
I first plugged it in to my PC, and it just said it was charging. It then told me to go to www.apple.com/ipod/downloads to get the software updated.
Since I didnt have the software cd, i thought i'd need that before i got the updater - how can it update software if I never had it to begin with? But no - I called Apple and the guy said all I'd need is the latest iTunes and the software updater. So i updated iTunes, downloaded the updater...
Then, the ipod said "Do Not Disconnect" for about 30 minutes after the updater said "(Up To Date)" beside Version 3.1. In addition to that, the little picture of the ipod on the left hand side of that update screen is a pic of the U2 iPod, but I don't actually have the U2 iPod. Also, the serial number shown is the same as the one hard-coded in my iPod, so I have no idea what is up with that.
Then, said i clicked "Reformat". Then I Unplugged it and plugged it into the wall. I chose "english" and waited a minute... it didn't seem to want to do anything else, so i plugged it back into my computer. Same exact thing, with the picture of the U2 iPod in the window. Except this time, when I open My Computer, it says "IPOD" under the e: drive, whereas before it just said "removable disk". Also, in iTunes, under Edit -> Preferences and the iPod tab, it says "no ipod connected". I have no idea what to do next.

I just want to clarify as well, that there is no mention of an iPod on the left-hand side of iTunes under "Source". Also there is no icon on the bottom right side of iTunes so that I can disconnect safely. It is pretty much leaving me no options for disconnecting. I just tried reformatting again, to no avail.

Variables for Closing Movie under Quiz Preferences

Similar Messages

Maybe you are looking for