Variables in CSS
Have come unstuck!
Working in VBscript and ASP I want to take a variable and
place it into a
css file to control with according to screen resolution.
I have the screen info, I have the CSS - just can't get them
to cooperate
with each other.
I'm sure this must easily be doable - can I get it to work
???? NOOOO!
Any pointers very gratefully recieved!
Buzby
> control with according to screen resolution.
Bad idea. Screen resolution tells you nothing about how wide
the user's
browser viewport is.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Buzby" <[email protected]> wrote in message
news:ea2ou2$40l$[email protected]..
> Have come unstuck!
>
> Working in VBscript and ASP I want to take a variable
and place it into a
> css file to control with according to screen resolution.
>
> I have the screen info, I have the CSS - just can't get
them to cooperate
> with each other.
>
> I'm sure this must easily be doable - can I get it to
work ???? NOOOO!
>
> Any pointers very gratefully recieved!
>
> Buzby
>
Similar Messages
-
What is the variable name initialising the CSS in the HTML index file when publishing out with the HTML5 option?
Thanks,
OliverNot really sure what you are after, but the style sheet is loaded in the head when the html page loads. There are surely some inline styles being applied also. CSS as a whole is not put into a variable and CSS does not contain variables. You can use JavaScript to change styles though.
<link rel="stylesheet" type="text/css" href="captivate.css" /> -
I have a css11503 running 7.30.0.05 and I am trying to install a custom script (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a00801e1dfb.shtml)
I login to the CSS, execute: script record http-test <enter>
However, when I paste in the script and it gets to the initial arg length checking:
"if ${$ARGS}[#] "NEQ" "3"
It errors out and says
%% Error undefined variable.
Any idea what I am doing wrong?
Thanks!
-wPI have the same problem. It prompts an error in some lines though the "show script" seems to be ok. I'm worry about that the script won't work in production and I can test it.
I downloaded other similar scripts via FTP but FTP fails for this one, the CSS is no able to download the script from the FTP server.
Also I have downloaded via FTP similar scripts that starts with the same line (if ${ARGS}[#] "NEQ" "2".
My version is sg0820501. I know that the scripts configuration is ok cause I have it configured in other CSS.
CSS-Device# script record ap-kal-tcp-connect-graceful
Press Ctrl^C to terminate recording...
CSS-Device#
CSS-Device# if ${ARGS}[#] "NEQ" "2"
^
%% Error undefined variable.
CSS-Device# echo "Usage: xxx ip port"
Usage: xxx ip port
CSS-Device# exit script 1
CSS-Device# endbranch
endbranch: Not in Branch command.
CSS-Device#
CSS-Device# set HostNameA "${ARGS}[1]"
^
%% Error undefined variable.
CSS-Device# set PortA "${ARGS}[2]"
^
%% Error undefined variable.
CSS-Device#
CSS-Device#
CSS-Device# set EXIT_MSG "ERROR: Failed to connect"
CSS-Device# socket connect host ${HostNameA} port ${PortA} tcp 2000
^
%% Error undefined variable.
CSS-Device#
CSS-Device# no set EXIT_MSG
CSS-Device# socket disconnect ${SOCKET} graceful
^
%% Error undefined variable.
CSS-Device#
CSS-Device# exit script 0
CSS-Device#
CSS-Device#
Script <ap-kal-tcp-connect-graceful> recorded.
CSS-Device# show script ap-kal-tcp-connect-graceful
if ${ARGS}[#] "NEQ" "2"
echo "Usage: xxx ip port"
exit script 1
endbranch
set HostNameA "${ARGS}[1]"
set PortA "${ARGS}[2]"
set EXIT_MSG "ERROR: Failed to connect"
socket connect host ${HostNameA} port ${PortA} tcp 2000
no set EXIT_MSG
socket disconnect ${SOCKET} graceful
exit script 0
CSS-Device# -
I need to have an element not render if a WebApp text field is empty (no URL). This implementation is a bit tricky for me as the layout of the plugin gets rendered partially by JavaScript. I am using Fancybox as a lightbox type feature. It is set up to use a data-fancybox-title html property to render a caption and a link to a website.
With Liquid I would like to check if the website url string is empty, then I will need to change the CSS for the element that contains the link & caption to display:none;. I am not sure how to accomplish this with Liquid? Or will this need to be done with something like jQuery. Thanks.
Code: [HTML] Pastebin.comGreat news! I used media queries inside of CSS and got my home page to work on a nice 1280x720 effortlessly However, i have a slideshow script that has the image running 1000x400 and I am wanting to know if there is a way to access the variable of this script:
// JavaScript Document
var mygallery=new fadeSlideShow({
wrapperid: "slideshow", //ID of blank DIV on page to house Slideshow
dimensions: [1000, 400], //width/height of gallery in pixels. Should reflect dimensions of largest image
imagearray: [
["slideshow/XavierHeadSlide1.jpg"],
["slideshow/XavierHeadSlide2.jpg"], ["slideshow/XavierHeadSlide3.jpg"]
//<--no trailing comma after very last image element!
displaymode: {type:'auto', pause:1500, cycles:0, wraparound:false},
persist: false, //remember last viewed slide and recall within same session?
fadeduration: 2000, //transition duration (milliseconds)
descreveal: "ondemand",
togglerid: ""
I want to access the "dimensions" variable in CSS so I can modify the size without having to create a second image that is slighty smaller... I tried setting the slideshow DIV as a CSS class, but it just simply cut off the image.
thanks a bunch for all of your help on this matter. -
Assigning present-state CSS colors within components
Hi Folks,
Got a ton of components on my site that I use for navigation. Nav Bars, Button bars, etc. Any given component might therefore link to 20 or 30 subpages.
Simple question: How do I assign present-state colors to a given button within a component?
For example: a Nav Bar component has buttons that will lead a visitor to any of a dozen pages. The Nav Bar therefore looks the exact same on every one of those twelve pages, but I'd like the button indicating the present (or current) page to be a different color. The button for page 9, for instance, should have a different color (or current state) when the visitor is actually on page 9.
The challenge: how to pull this off when the button to be highlighted exists on a component, rather than on the individual page file itself?
This might not be as hard as it sounds - I'm basically looking for the appropriate CSS tag.
Many thanks -Okay, so after getting almost no views and getting zero replies here, I've found the answer. The answer is NO, this can't be done. Well, at least the part about being able to use variables within the css file. See details at:
http://forums.adobe.com/message/2645929#2645929
I found some discussion of people hoping that it will be possible in the future to have variables within css, but that would still not provide what I was looking for in Flash Builder. Perhaps a pre-processing program could be written that would inject colors into the mxml, skin, and css files, but I'm not sure how well that would play with the FB IDE. And even with such a thing, going back and forth with changes could be a problem.
So I guess we're stuck doing it the hard way. -
I need a recommendation for a PHP calendar script. It should
have both a
large display for use on a single page as well as a small one
for use in
a sidebar, like on a home page. The script needs to be able
to handle
links from within an event and must be easy for a user to
update.
And finally, it must integrate easily into an existing
design.
Any ideas?
Thanks,
Harvey WassermanYou're welcome!
eclipsme wrote:
> Thanks, MD
>
> Harvey
>
> Mad Dog wrote:
>> If you want to be able to change the PHP files, then
this is a
>> problem. If you don't need to mess with them (and I
don't know why
>> you would when there are plenty of variables and CSS
you can mess
>> with the make the changes) then there's nothing to
worry about.
>> Installation is a breeze as long as you have Zend
Optimizer or
>> IonCube on the server. MD
>>
>>
>> "eclipsme" <[email protected]> wrote in message
>> news:ga8a3l$1o0$[email protected]..
>>> Thanks for the reference. Yes, this looks
interesting, but I don't
>>> like that that the script is encoded. For
instance, this line
>>> bothers me: "DON'T GIVE UP! Installation of
encoded files can be tough.
>>> If you
>>> haven't already, try the Auto-installer."
>>>
>>> Harvey
>>>
>>> Mad Dog wrote:
>>>> www.easyPHPCalendar.com
>>>>
>>>> I've used it on several sites including
integrating it into a
>>>> Wordpress-run site.
>>>>
>>>> Mad Dog
>>>>
>>>>
>>>> eclipsme wrote:
>>>>> I need a recommendation for a PHP
calendar script. It should have
>>>>> both a large display for use on a single
page as well as a small
>>>>> one for use in a sidebar, like on a home
page. The script needs
>>>>> to be able to handle links from within
an event and must be easy
>>>>> for a user to update.
>>>>> And finally, it must integrate easily
into an existing design.
>>>>>
>>>>> Any ideas?
>>>>>
>>>>> Thanks,
>>>>> Harvey Wasserman -
"error in parsing value" "declaration dropped"
A week ago I lost the ability to log in to my banking site (BBVA Compass). After submitting my username, it USED to then ask for my password on the subsequent screen. Now, it dies with a screen that shows "please wait", never gets beyond that. Looking in the error panel I see countless error messages for "error in parsing value" "declaration dropped", concerning a host of variables in CSS, such as radius, background, background image, etc.
I CAN log in easily with MSIE. I have killed cookies and history, deleted and reinstalled FF, disabled the few add-ons I use, no joy.
I have searched on these terms in "FF Help" and found some comments about these, but nothing that resolves the problem. This happens on several sites, I am including one.* Did you also clear the browser cache? This sometimes is needed when website have made update, to clear mismatched files.
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
<br>
* Do you have Firefox enter the password for you? In that case, you may want to clear the passwords for affected sites here:
orange Firefox button ''or'' Tools menu > Options > Security > "Saved Passwords" button
<br>
* Are there other sites with a problem that don't require a login? We could visit the URLs and see whether we see an issue.
* Regarding the Error Console (Ctrl+Shift+j), if you filter the list by clicking the Errors button at the top, you can isolate the most critical ones. A lot of the style warnings have no effect on functionality, just appearance. -
Need a calendar recommendation
I've had my iphone for about a week and love it but I'm not a fan of the calendar that came on it. So I'm looking for app recommendations. I need the ability to set a custom repeat (ie every 3rd day, Tue/Thur, MWF). Syncing with a web-based calendar would be nice but not totally necessary since I have my phone with me at all times. If you have recommendations of calendar apps that will do this please share. Thanks in advance.
You're welcome!
eclipsme wrote:
> Thanks, MD
>
> Harvey
>
> Mad Dog wrote:
>> If you want to be able to change the PHP files, then
this is a
>> problem. If you don't need to mess with them (and I
don't know why
>> you would when there are plenty of variables and CSS
you can mess
>> with the make the changes) then there's nothing to
worry about.
>> Installation is a breeze as long as you have Zend
Optimizer or
>> IonCube on the server. MD
>>
>>
>> "eclipsme" <[email protected]> wrote in message
>> news:ga8a3l$1o0$[email protected]..
>>> Thanks for the reference. Yes, this looks
interesting, but I don't
>>> like that that the script is encoded. For
instance, this line
>>> bothers me: "DON'T GIVE UP! Installation of
encoded files can be tough.
>>> If you
>>> haven't already, try the Auto-installer."
>>>
>>> Harvey
>>>
>>> Mad Dog wrote:
>>>> www.easyPHPCalendar.com
>>>>
>>>> I've used it on several sites including
integrating it into a
>>>> Wordpress-run site.
>>>>
>>>> Mad Dog
>>>>
>>>>
>>>> eclipsme wrote:
>>>>> I need a recommendation for a PHP
calendar script. It should have
>>>>> both a large display for use on a single
page as well as a small
>>>>> one for use in a sidebar, like on a home
page. The script needs
>>>>> to be able to handle links from within
an event and must be easy
>>>>> for a user to update.
>>>>> And finally, it must integrate easily
into an existing design.
>>>>>
>>>>> Any ideas?
>>>>>
>>>>> Thanks,
>>>>> Harvey Wasserman -
I have an opportunity to get Studio MX 2004 for a pretty
cheap price, but I was looking more into the newer Studio 8. What
are the major differences between the two?Yeah, I guess that's completely right. I create the stuff,
but I've not
worked with a non-dynamic site since I don't know when, so
most of my
elements are hidden until they show.
Sorry, didn't think of that, and now that you mention it, I
do remember
floats being off...
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> MX2004 is not good with a) floats, b) relative
positioning, c) overflow.
> If you have layouts that are dependent on those, you
will have rendering
> issues in Design view.
>
> MX2004 is also unable to cope with many of the
enhancements of CSS2.
>
> But it's likely to be a subjective thing, you know?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "crash" <[email protected]> wrote in
message
> news:[email protected]...
>> My opinion as well. I've not had [m]any problems
with it.
>>
>> jon
>>
>> "Osgood" <[email protected]>
wrote in message
>> news:[email protected]...
>>> Murray *ACE* wrote:
>>>
>>>> "major" should be "MAJOR". DW8 is a big step
ahead in CSS support
>>>> compared to DMX2004.
>>>
>>> I guess that depends on how you write the css. I
know some people have
>>> issues but I still use MX04 and find it
virtually without issues when
>>> rendering the css I write.
>>>
>>> If you now use, or plan to use CSS to do
anything more than
>>>> change font colors, DW8 would be the version
of choice.
>>>
>>> Sorry, but in my opinion thats just Bollocks! If
MX04 was that bad I
>>> would have updated by now.
>>>
>>> I've produced some quite complex layouts using
css and MX04 and apart
>>> from a few small issues all render just about
perfectly.
>>>
>>> I'll accept that it may be that v8 may well
recognise more variables of
>>> css so it may be more applicable for those that
were struggling with css
>>> to move to that version, but its not strictly
necessary if you know waht
>>> you are doing.
>>>
>>
>>
>
> -
Resize animation in browser window with toolkit for createjs
Hi. I'.m a flash newbie with little coding experience. I have an animation that I created in flash that I exported to html5 with toolkit for createjs. It looks good, however I would like to have the animation be proportionally sized to the browser window, so that it can be viewed on a variey of devices. My iPhone seems to adjust the size, however when I view it on the desktop, the bottom gets cut off, and remains the same size when I resize the browser window. Is there any way to have the animaton resize according to the browser window?
Thanks
TomGreat news! I used media queries inside of CSS and got my home page to work on a nice 1280x720 effortlessly However, i have a slideshow script that has the image running 1000x400 and I am wanting to know if there is a way to access the variable of this script:
// JavaScript Document
var mygallery=new fadeSlideShow({
wrapperid: "slideshow", //ID of blank DIV on page to house Slideshow
dimensions: [1000, 400], //width/height of gallery in pixels. Should reflect dimensions of largest image
imagearray: [
["slideshow/XavierHeadSlide1.jpg"],
["slideshow/XavierHeadSlide2.jpg"], ["slideshow/XavierHeadSlide3.jpg"]
//<--no trailing comma after very last image element!
displaymode: {type:'auto', pause:1500, cycles:0, wraparound:false},
persist: false, //remember last viewed slide and recall within same session?
fadeduration: 2000, //transition duration (milliseconds)
descreveal: "ondemand",
togglerid: ""
I want to access the "dimensions" variable in CSS so I can modify the size without having to create a second image that is slighty smaller... I tried setting the slideshow DIV as a CSS class, but it just simply cut off the image.
thanks a bunch for all of your help on this matter. -
Variable Entry Style Sheet (CSS)
The Web template uses the style sheet from the MIME repository:
<link href=/sap/bw/mime/BEx/StyleSheets/BWReports.css type=text/css rel=stylesheet>
But, when the variable entry screen is displayed when executing the query it is not formatted and uses this style sheet:
<link rel="stylesheet" href="OWNER">
What is missing or needs to be configured so that the variable entry page uses the same style sheet as the Web template?
Thanks for the help in advance.i had ot type out in the file:css in order for it to be imported into DW i dont know why its doing that.
Did you define a local site folder in DW before you begain your project?
http://help.adobe.com/en_US/dreamweaver/cs/using/WS753df6af718a350a60097e0f131686fa2b4-7ff e.html
This critical first step allows DW to manage your site links and assets for you. Without a local site folder definition, many of DW's advanced features won't work.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
PHP Code, Variables & CSS. Would this work?
Hello,
I am new to PHP, this is my first script I have made without any help, I am using xammp to test my site, but the basics of the code is this. I am adding an include code into the navigation menu and in the CSS I have defined certain rules for the nav. Now in the code when you click on one of the links, it will change the variable to a corresponding number. The Code is pretty much self explanatory.
Menu.php:
<?
$active = 1;
?>
<ul>
<li><a href="#" onclick="<? $active = 1; ?>" class="<? if ($active = 1){?>#navigation ul li a.active<? } ?>">Portfolio</a></li>
<li><a href="#" onclick="<? $active = 2; ?>" class="<? if ($active = 2){?>#navigation ul li a.active<? } ?>">Web Examples</a></li>
<li><a href="#" onclick="<? $active = 3; ?>" class="<? if ($active = 3){?>#navigation ul li a.active<? } ?>">Contact Me</a></li>
</ul>
Menu CSS:
#navigation { text-align: right; font-weight: bold; text-transform: uppercase; font-size:14px; line-height:18px; height:70px;}
#navigation ul{ list-style-type: none; }
#navigation ul li{ display:inline; padding-left:15px; }
#navigation ul li a{ text-decoration: none; color:#fff; }
#navigation ul li a:hover,
#navigation ul li a.active { color:#ffe6a5; }
Now what I want to happen is when you click on one of the links, it will change to active, changing the color of the text to tell the visitor that, that link is active. Now normally I would do it though CSS, changing the texts rule to the active, but in order to be able to change buttons without having to do it though all the pages and also because I want to start using PHP more.
The Include works, as you can see below, but the code above does not work, because the home button should be a light yellow color.I can't comment on your PHP, but you can achieve your desired result quite simply using this demo from Nancy.
http://alt-web.com/Articles/Persistent-Page-Indicator.shtml -
Can one get the Java variables corresponding to the css properties
Hi,
I want to be able to get some css properties as Java variables so that I can animate their values.
Through css there is no way to perform animations of properties, in a non discrete way.
Cheers and thanks in advance,You may be interested in tracking progress on:
http://javafx-jira.kenai.com/browse/RT-17293 "CSS Style Object Model in Java".
In the meantime, maybe you make use of something like this which animates a value within a css style string.
@Override public void start(final Stage stage) throws Exception {
final Rectangle rectangle = new Rectangle(150, 100);
DoubleProperty greenness = new SimpleDoubleProperty();
greenness.addListener(new ChangeListener<Number>() {
@Override public void changed(ObservableValue<? extends Number> number, Number oldValue, Number newValue) {
rectangle.setStyle("-fx-fill: rgb(0, " + newValue + ", 0);");
Timeline t = new Timeline(
new KeyFrame(Duration.ZERO, new KeyValue(greenness, 0)),
new KeyFrame(Duration.seconds(5), new KeyValue(greenness, 255))
t.setCycleCount(Animation.INDEFINITE);
t.setAutoReverse(true);
t.play();
stage.setScene(new Scene(new Group(rectangle)));
stage.show();
} -
Missing Images and CSS when going to portal/server.pt can't login
Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
======= Diagnostic Run Complete =======
Startup completion percentage: 100% (50 steps out of 50 complete)
===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) externalI am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps. -
Posting contact form to variable email address PHP
Hi all, another one!
I want the email address to be the hidden variable in the form below - variable higlighted in Red. What would I put for "$to ="?
Any help would be appreciated.
Tom
<?php
if (array_key_exists('send' , $_POST)) {
// mail processing script
// remove escape characters from POST array
if (PHP_VERSION < 6 && get_magic_quotes_gpc()) {
function stripslashes_deep($value) {
$value = is_array($value) ? array_map('stripslashes_deep', $value) : stripslashes($value);
return $value;
$_POST = array_map('stripslashes_deep', $_POST);
$to = '';
$subject = '';
//list expected fields
$expected = array('name', 'email', 'comments');
//set required fields
$required = array('name', 'comments');
//create empty array for any missing fields
$missing = array();
// assume that there is nothing suspect
$suspect = false;
// create a pattern to locate suspect phrases
$pattern = '/Content-Type:|Bcc:|Cc:/i';
// function to check for suspect phrases
function isSuspect($val, $pattern, &$suspect) {
// if the variable is an array, loop through each element
// and pass it recursively back to the same function
if (is_array($val)) {
foreach ($val as $item) {
isSuspect($item, $pattern, $suspect);
} else {
// if one of the suspect phrases is found, set Boolean to true
if (preg_match($pattern, $val)) {
$suspect = true;
// check the $_POST array and any subarrays for suspect content
isSuspect($_POST, $pattern, $suspect);
if ($suspect) {
$mailSent = false;
unset($missing);
} else {
//proces the $_POST Variables
foreach ($_POST as $key => $value) {
//assign temporary variable and strip whitespace if not an array
$temp = is_array($value) ? $value: trim($value);
//if empty and required, add to $missing array
if (empty($temp) && in_array($key, $required)) {
array_push($missing, $key);
} elseif (in_array($key, $expected)) {
//otherwise, assign to a variable of the same name as $key
${$key} = $temp;
// validate the email address
if (!empty($email)) {
// regex to identify illegal characters in email address
$checkEmail = '/^[^@]+@[^\s\r\n\'";,@%]+$/';
// reject the email address if it doesn't match
if (!preg_match($checkEmail, $email)) {
$suspect = true;
$mailSent = false;
unset($missing);
//go ahead ONLY if not suspect and all required fields OK
if (!$suspect && empty($missing)) {
// build the message
$message = "Name: $name\r\n\r\n";
$message .= "Email: $email\r\n\r\n";
$message .= "Message: $comments\r\n\r\n";
//limit line length to 70 characters
$message = wordwrap($message, 70);
//Create aditional headers
$headers = "From: Website Enquiry\r\n";
$headers .= 'Content-Type: text/plain; charset=utf-8';
if (!empty($email)) {
$headers .= "\r\nReply-To: $email";
//send it
$mailSent = mail($to, $subject, $message, $headers);
if ($mailSent) {
//$missing is no longer needed if the email is sent, so unset it
unset($missing);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<?php
if ($_POST && $mailSent) { ?>
<META HTTP-EQUIV="Refresh" CONTENT="5;URL=index.php">
<?php } ?>
<title></title>
<meta name="description" content="" />
<meta name="keywords" content="" />
<link href="style/style.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-11804201-5']);
_gaq.push(['_trackPageview']);
(function() {
var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
</script>
</head>
<body<?php if ($_POST && $mailSent){ ?> onLoad="redirect()"<?php } ?>>
<img src="images/photography/background.jpg" alt="Jack Wilesmith Furniture Design" class="bg" id="bg" />
<div id="container">
<div id="Header">
</div>
<div id="content">
<?php
if ($_POST && isset($missing) && !empty($missing)) {
?>
<p class="warning"><strong>Please complete the missing item(s) indicated.</strong></p><br />
<?php
} elseif ($_POST && !$mailSent) {
?>
<p class="warning"><strong>Sorry, there was a problem sending your message, please try again later. </strong></p><br />
<?php
} elseif ($_POST && $mailSent) {
?>
<p><strong>Your Message has been sent succesfully - <strong>You will be redirected in 5 seconds</strong></strong></p><br />
<SCRIPT LANGUAGE="JavaScript"><!--
function redirect () { setTimeout("go_now()",5000); }
function go_now () { window.location.href = "index.php"; }
//--></SCRIPT>
<?php } ?>
<form id="form1" name="form1" method="post" action="<?php echo $_SERVER['PHP_SELF']; ?>">
<p>
<label for="name">Name:</label><br />
<input name="name" type="text" class="textInput" id="name"
<?php if (isset($missing)) {
echo 'value="' . htmlentities($_POST['name'], ENT_COMPAT, 'UTF-8') . '"';
?>
/> <?php
if (isset($missing) && in_array('name', $missing)) {?> <span class="warning">Please enter your name</span><?php } ?>
</p><br />
<p>
<label for="email">Email:</label><br />
<span id="sprytextfield1">
<input name="email" type="text" class="textInput" id="email"
<?php if (isset($missing)) {
echo 'value="' . htmlentities($_POST['email'], ENT_COMPAT, 'UTF-8') . '"';
?>
/>
<span class="textfieldInvalidFormatMsg">Invalid format.</span></span>
<?php
if (isset($missing) && in_array('email', $missing)) {?> <span class="warning">Please enter your Email Address</span><?php } ?>
</p><br />
<legend></legend>
<p>
<label for="comments">Message:</label><br />
<textarea name="comments" id="comments" cols="45" rows="5"><?php if (isset($missing)) {
echo htmlentities($_POST['comments'], ENT_COMPAT, 'UTF-8');
} ?></textarea><?php
if (isset($missing) && in_array('comments', $missing)) {?> <span class="warning">Please enter a Message</span><?php } ?>
</p><br />
<p class="clearIt">
<input name="send" type="submit" id="send" value="Send message" />
</p>
<input name="email" type="hidden" id="email" value="[email protected]" />
</form>
</div>
</div>
<script type="text/javascript">
<!--
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "email", {isRequired:false, hint:"[email protected]"});
//-->
</script>
</body>
</html>Lovely, simple but beautiful!
Thanks for that.
T
Maybe you are looking for
-
Set price list for new invoice
When creating a new invoice for a customer, Is there a way to specify which price list to get the prices from either for the invoice or for the invoice line? I want to have the option to use a price list that is different from the customers default.
-
Mp4 needing to be converted to flash for viewing
Hi I have premier elements and I was hoping to be able to convert existing mp4 files to flash to use on a website. I don't see how I can do that... any suggestions? Thanks. Debi
-
I just set up my Mac OS 10.3.9 to file share with Windows XP and have been successfully sharing for a few days. Today I went in to send some documents and my Shared Documents folder was gone...only an alias remained. What happened? And how do I set u
-
What's the purpose of message type ADRMAS
Hello, I want to distribute customer master data using message type DEBMAS. I read something about message type ADRMAS. Why should I also use type ADRMAS because DEBMAS already contains address data? Regards, Jan
-
Use dbms_lob.loadfromfile to handle chinese character
Hello, I have a database with NLS_LANG=TRADITIONAL CHINESE_HONG KONG.ZHT16BIG5 There is a table with clob type column. I've tried to use dbms_lob.loadfromfile to load file content into the clob type column. But the result is that no matter the file i