Variables in Invoice's PLD for Total Down Payment

I would like to know the number of the system variable for Total Down Payment with the system Currency in the Invoice's PLD.
Thanks
Isabelle LAGUERRE

In the PLD part II's e-learning, I found the solution. You must display system variables on the document's screen. When you are on the variable, its number is displayed at the bottom of the screen. You can use it in PLD.

Similar Messages

You cannot reconcile a/p invoice transaction with A/P Down Payment request manually

Dear Experts,
One of my client has facing this problem while doing Reconciliation then he is getting the following error.
"you cannot reconcile a/p invoice transaction with A/P Down Payment request manually"
then we found a solution in SAP Forums and applied the same in Test Company Environment, then its working good and also attaching the scenario with screen shot.
Please have a look into the attachment then tell us. Is it a good practice to proceed or is there any solution as simple as this.
One more thing is my client has having more 20000 records to do reconciliation and he is looking for any alternative solution.
So please tell us a Better solution.
We are awaiting for your prompt response.....

Hi,
Please check SAP note:
1340606 - Paid Down Payment Request cannot be reconciled
internally.
Thanks & Regards,
Nagarajan

Error while using Special GL indicator H for Customer Down Payment

Dear Friends,
I have configured the Special GL Indicator H (Security Deposit) for Customer Down Payment received. I also make the necessary settings in OBXY for assignment of Special GL against the reconciliation account.
When I am doing the Customer Down Payment entry through F-29 using special GL indicator H system giing me the following error message
Special G/L indicator H is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
System Response
The entry is not accepted.
Procedure
Enter an allowed special G/L indicator or initiate a change of the default settings
I also check the configuration again but still systems is giving me the same above error.
Kinldy give me the solution or way of doing this ASAP because I am working in an implementation Prj.
Regards,
Sandeep

Dear Surya,
I have made the necessary changes in Special GL Indicator F in their properties I assign target spl GL indicator H but while in spl GL indicator H when I assign target spl GL indicator F system gives me following error
Delete target special G/L indicator
Message no. F4137
Diagnosis
In the SAP system, you can only use "Target special G/L indicators" with "Down payment/down payment request" when "Noted item" is also selected at the same time. These requirements are not fulfilled in the special G/L indicator "H".
Procedure
Delete the specified target special G/L indicator.
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number can be taken from the technical documentation.
Thanks,
Sandeep

Badi/User-exit for vendor down payment request in f-47

hi all,
is there any badi/user-exit available for vendor down payment request?
I need to trigger a workflow when a vendor down payment request in transaction code F-47.
how can i do this?
Pls guide me.
Thanks & regards,
Raj

Did it using a business transaction event

Ageing analysis for the down payment made to vendors-reg

Dear Gurus,
Can anybdoy explains my how to do ageing analysis for the down payment made to various vendors.
Thanks
C.M.SATHISH KUMAR.
[email protected]

OK
Config t code is OBDF
Select AP view and due date analysis.
You need to create a variant for the field BSIK-UMSKZ in program RFKRRE01 which is the program for Vendors for due data analysis.
In the config you need to make sure create evalution is ticked.
You then need to set up a variant in program RFKRRSEL, for Vendor analysis, it should be called SAP_VARI.
Once all of that has been set up, you need to schedule a job to run for RFKRRSEL daily.
In terms of accessing the programs you need yo use t code SE38.
and to schedule a job use t code SM36.
Hope this helps.
Please award points.

User-Exit/Badi For Vendor Down Payment Request

hi All,
Is there any user-exit or badi available for vendor down payment request?
tcode:f-47.
please let me know.
Thanks & Regards,
Raj

I want to trigger an event for workflow when
a vendor down payment request is created in
*tcode f-47.*
Well if you are not able to find the correct enhamcement spot then you can approach as below
When ever you create a New Item In the Tcode F-47 the if you succesfully saves the data then it prompts you a message like below
*Document 1700000000 was posted in company code 2100*
So instead of searching for Exits or BAdi's try to Start workflow by using the message
for this all you need to bind the message and the Workflow , for this you have use the transaction SWUY it is a wizard where you need to specify the Message class and the message number

Partial payment for Vendor down payment request

Hi Gurus
How to do partial payment for vendor down payment request using F-48
If i enter partial amount next time same request is not appearing in the list.
Pls guide me. Reply will be appreciated with full points
Thanks in advacne
Sneha

Hi Ravi
Thanks for info
My doubt is MM is creting Down payment request using F-47 For ex Rs100000
for this request using F-48 i want to pay partialally means for Rs50000
Balance i want to pay it later, How this can be done.
Pls guide me
Rgds
Sneha

Workflow for vendor down payment request

hi All,
i need to develop a workflow for vendor down payment request as there is no standard workflow available.
But not able to find any business object for it. Is there any standard business object available for it?
If no what are the steps that i should follow to create a business object for vendor down payment request?
plz guide me.
Thanks & Regards,
K.Perumalraj
SAP Workflow Consultant

BKPF is the business object

What is the T code for paying down payment for assets

hi,
please let me know if , f-90 has to be used for downpayment with transaction type 180, or there is any other transaction for it

Hello Sai
Define the asset number and sub-number as optional entry in accounts payable Customizing in the field status group for the reconciliation account for vendor down payments (transaction OBC4).
In the field status of the posting key for vendor down payments, you also need to define the asset number and sub-number as optional entry.
Then you can enter the asset under construction when posting with F-48 and accounts for asset down payments will be posted.
Regards
Javier Reviriego

Withholding Tax Calculation Error for Vendor Down Payment Clearing:Oct '09

Hi,
We are trying to incorporate the new Withholding Tax Structure w.e.f. 01-Oct-09.
There were 3 scenarios possible:
a. Invoice = Down Payment
b. Invoice < Down Payment
c. Invoice > Down Payment
While 1 & 2 were taken care of effectively, the third scenario did not work as expected. The scenario is as follows:
1. Down Payment (Date : 30/09/09)
Amt : Rs. 40000/-;
Withholding Tax @ 15% : Rs. 6000/- (40000 * 15%)
Surcharge @ 10% : Rs. 600/- (6000 * 10%)
Edu Cess @ 2% : Rs. 132 (Rs. 6600*2%)
Higher Edu Cess @ 1% : Rs. 66 (Rs. 6600*2%)
2. Invoice (Date : 02/09/09) - As per new TDS Rates
Amt : Rs. 50000/-
Withholding Tax @ 10% : Rs. 5000/- (50000 * 10%)
Surcharge : NIL
Edu Cess : NIL
Higher Edu Cess : NIL
3. DPC (Date : 02/09/09) - Reversal of TDS calculated in Down Payment (Step 1) above.
Issue:
While making J1INCHLN, amount is adjusted as Rs. -1000/- (hence zero) not payable.
Also, the Surcharge, Edu Cess & Higher Edu Cess are also getting reversed in DPC.
As suggested by SAP Note No. 1372734 - Handling of downpayment clearing scenarios after budget '09, the scenario does not seem to work.
Actual payable should be worked out as under:
Invoice : Rs. 50,000/-
DP : Rs. 40,000/-
Bal : Rs. 10,000/-
TDS @ 10% : Rs. 1,000/-
All TDS Challans, Certificates & Returns must reflect Rs. 1000/- in the Challan.
Require assistance.
Regards,
Kapil Tilwani

Hi Kapil,
The following needs to be taken care of -
The message controls settings as the note suggests must be set as W.
When entering the details the logic is Vendor Debit amount is Tax amount + 1
The Vendor credit line, the tax code has to be assigned with the advance amount (amount for which the challan has been created) as the tax base amount and the tax amount will be the extra liability that needs to be created.
In your example -
The tax amount will be - 2000 ( the debit at the time of downpayment clearing should have been 4000 instead of 6000)
Tax base amount - 40000 (Challan for this amount has already been made at the time of downpayment made)
The vendor Debit - 2001 (2000 + 1)
The vendor credit - 1
Note - Tax amount and base amount has to be made manually in the withholding Tax tab for the credit entry.
Please revert for any clarification.
Thanks and Regards,
Anit

Withholding Tax for Customer Down Payment F-29

Dear all,
I have configured the withholding tax and it works fine for the AP: invoice, payment, advance payment.
However I encountered problem for AR side: customer down payment (F-29). During the payment there is a "withholding tax" button that once you click a pop-up window will appear to enable you enter the withholding tax data.
My problem is no withholding pop up window appear and no error message as well. Thus I am unable to enter the withholding tax data.
The customer has been assigned with withholding tax type and withholding tax code. I follow the follow documentation for the configuration steps and it works well on AP side.
http://www.sapficoconsultant.com/Bonus/Extended%20Withholding%20tax%20configuration.pdf
Can you please kindly advise if there is any missing step need to be performed for withholding tax configuration for customer? How to solve the above issue?
thank you very much in advance.
Dahlia

Hi Umesh,
Thank you very much for your quick respond.
Yes, I forget to mentioned in my previous email, I have done the following in the customer master:
1. Assigned withholding tax type and withholding tax code.
2. Enter the validity date from and to.
3. Check the withholding tax checkbox in customer master.
However the F-29 still do not have a withholding tax window pop-up.
Any other things that I need to do?
Thanks a lot.
Dahlia

T code for Total incoming payment

Dear friends
I want to know the the Tcodes / menupath for the following reports.
1. The total incoming payment received from a particular e PAYER/Customer.
2. The total outstanding payment of a particular payer/ customer.( goods have been despatched and invoice has been raised but payment has not been made.)
Thanks & regards
debasish

Hi:
for Incoming Payment
Manually F-28 - Incoming Payments
Automatic payment Program - F110
For outstanding payment of a particular payer/ customer
Refer to T.code
FBL5N - Display/Change Line Items
Input customer account,Company code and select open items radio button.
You will able to see all the oustanding recievables or open items from customer.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

BAPI/Function Module for Vendor Down Payment Clearing(F-54)

My requirement is to clear Vendor Down Payment Document(F-54). One way is to use BDC but I am looking for other options.
Is there any other way(BAPI/FM) possible except BDC recording to achieve above requirement?
Thanks in advance,

Hi Nilesh,
I have the same requirement. How did you achieve it?
Regards
Prashant

FS206 error message for vendor down payments

Hi All,
I m getting following error message while posting vendor down payment using F-48,
Down pmnts with taxes are not permitted when processing with jur.code
Message no. FS206
Diagnosis
Taxes may not be entered for down payments with the jurisdiction code taxation procedure.
Procedure
Change the master record of the reconciliation account for down payments. It may not be tax-relevant (leave tax category blank).
I made the tax category in GL master data as blank. However it is still asking for a tax code.
Kindly let me know if anyone has faced a similar issue earlier.
Thanks in advance!
Best Regards,
Aman Goel

Hi,
Change the "Alternative Reconciliation Account" master data (in FS00) for down payment assigned to your vendor reconciliation account.
Leave the tax field blank and do not check mark posting without tax allowed.
Regards,
SDNer

Ehancement Spot for Vendor Down Payment Request F-47

Hi
I am trying to post a DP Request to Vendor with reference to a PO Document, which consists of various taxes. PO Base amount is 150 and Tax value is 25. When I am trying to pass a DP Request for more than 150 system is giving the error message "Order Value will be exceeded". Message Number is F5373.
If I change this error message to warning system will throw a warning message if the DPR value exceeds 150. I can proceed further but it will not restrict if another DP Request with reference to the same PO is passed.
How to restrict the system to accept only one Down Payment Request with reference to any given PO ?
Are there any user exits to be used ? if so please let me know. Also the enhancement spots in order to control multiple DP Requests against the same Purchase Order.
Thank you
Gemini

Hi,
You can create a validation (OB28), checking with user-exit that you'll create, whether there are down payments posted against PO. Pre-requisites could be the document type of down payment that you're using in the system or the trnsaction (F-47) itself.
Regards,
Eli

Variables in Invoice's PLD for Total Down Payment

Similar Messages

Maybe you are looking for