Variables/Input Parameters Value help not showing texts

Hello,
I have created a crystal report based on a calculation view in Crystal Reports for Enterprise 4.1 SP5, which has a input parameter on the field "Region". For the value help, I am using a custom view based on T005U in which I have made sure that RegionName field is present in the "Label Column" property of the Region field.(Required for viewing descriptions of LOVs).
In the crystal report, while previewing data in the query builder, I am able to see the value help for the input parameter in the prompt screen, which displays only the key part, but does not display the description of it. Moreover, after accepting the prompt value, the preview runs into an error(as shown below). Please note that I get the error below only when Region is a part of the output fields of the query.
Instead of input parameter, when I create a variable on the region field in the main calculation view, with the same value help view, I am able to do data preview in the query builder as also data appears in the report on running the query. But, just as in the case of input parameter value help in the prompt screen, even over here, I am only able to see the key part and not the description.
Are variables/input parameter LOV's supposed to display descriptions or just the key part? As also, any reason why I should be getting this error while using Input parameter?
Kindly let me know if I am missing something in the development of this report.
Regards,
Alston

Hi,
          I hope you are taking the BEx Query as a source to the crystal report. In the BEx query check region info object  should is maintained as  Text and Key. If text is not maintained over there you will not be getting text in Crystal reports.
Krishna.

Similar Messages

  • Issue with Value Help not showing in Portal screen Please Help

    Hello Guru's,
    What is the best practice for doing ESS/MSS upgrade.
    Since everytime we upgrade the BP we need to redo all the customizations again in the new track and deploy.
    I have gone through Note 872892 and read the NWDI cookbook.
    I feel there should be some tool (which will tell the differences in Code from one track to other if so how to install and where to install?) or a better way to apply the customizations to the new track when we upgrade the ESS/MSS components.
    Appreciate your help.
    Thanks,
    Pramod

    these links should be handy
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1620366250DB20044614760992422928End?blog=/pub/wlg/3390
    How to Migrate Developed Software Components to a New Release in NWDI

  • Created by column value is not showing in XSLT List View After Migration To 2013

    Hello All,
    In my XSLT Created By Column value is not showing. Please help me with this problem. My code is simple I have custom column in XSLT name as 'Reported By' in which I want to show 'Created By' column value. but it is not showing. please help me with that.
    Thanks in advance

    hi
    is anyone has answer for this question.
    thanks...!!!!

  • Lov Values are not showing for Discoverer Reports in Application

    Hi,
    I developed some discoverer reports, those reports having parameters with LOV. Those LOV values are showing in Discoverer Desktop, but after registering those reports in Oracle applications those LOV values are not showing. Pls let me know how resolve this issue.
    Regards,
    Hanimi.

    Hi,
    Also it is necessary to know how the LOVs are defined. Are they based on Application flexvalues for example? In which case it may be that you have not got your NLS language parameters set correctly when connecting from Applications.
    Rod West

  • Key frame values are not showing

    Does anyone know why my key frame values are not showing? How do I get them back?

    See this about showing and hiding columns:
    After Effects Help | General user interface items

  • Stacked Column Chart Value does not show in Preview or SWF

    I have created a simple (one-column) stacked Column chart from an imported Excel 2007 spreadsheet. I am using 3 values and all three are there when I am editing the chart. When I do a Preview or Export it to a .swf file, the third value does not show up. It only shows the first two.
    I am running Xcelsius 2008, Version 5.1.3.0, build 12,1,3,495.
    Edited by: Rich Krejsa on Apr 9, 2009 9:35 PM

    Hi Rich,
    Try to rebind the data with the component and preview and see.
    Also check with other charts to see if you get the same behaviour.
    Try placing a table component and display those cell and see what values are there when you preview.
    There could also be posiblities that the third values must be very small as compared to the other two,so check that as well and may be select the secodry scale in the general tab for the 3rd series.
    Let me know if this helps.
    Thanks,
    Amit Mathur.

  • Parameter values are not showing in in the Organization Parameter form

    We have done a setup for an Inventory Organization.
    Everything was working fine.
    Values were showing everywhere.
    We have lot of transactions done in the org also.
    But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
    I have checked data is there in the base table mtl_parameters.
    Value is coming for other organizations. Only one specific organization is having this issue.
    Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
    But in frontend screen the values are not showing. even organization code also not showing.
    Navigation is: Inv Super user --> Setup --> Organization --> Parameter

    Have you checked Organization Access to ensure that no one restricted that org?
    Or shipping grants and roles?
    I think there are quite a few places that you can restrict access.

  • Excise values are not showing in billing

    hi all,
    In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
    thanks.

    mohan prabu,
    Its Surprising, how come it is not appearing in Order and billing but yet it is passed to register RG23D.
    1. Check Whether you have maintained those condition types in your pricing procedure.
    2. Check whether you have maintained VK11 i.e., Values for those Excise Condition Types.
    3. Check whether you have activated Statistical indicator for those condition types.
    4. Proceed performing Analysis in Item details --> Conditions Tab --> Click Analysis tab provided to check whether the conditio types has been executed or not.
    5. Check your Config Settings
    IMG --> LG --> Tax on Goods Movement --> India --> Basic Settings --> Determination of Excise Duty -->  Maintain Excise Defaults
    Check these initially and let us know your outcome...
    Regards
    Sathya

  • ST06 Screen values are not showing as ecpected

    Hi Experts,
    ST06 Screen values are not showing as expected like avg CPU idle time and min Swap space, page out and page in values etc.
    All fileds are showing "Zero Values" since last week and i just found tht today.
    I Went  to
    SM 36, All Configured standard jobs are SAP_COLLECTOR_FOR_PERFMONITOR, SAP_COLLECTOR_FOR_NONE_R3_STAT.. etc are running fine.
    Restarted the SAPOSCOL service also.Please suggest me.Please find the Enclosed values..
    Compare recent days for server cambsvr13    Date/time  27.06.2008 13:40:31
    Average values for peak workload
    Date      Usr  Sys  Idl    Pages in/h             Pages out/h               Swap space              Lan packets/h          Lan errors/h
               avg  avg  avg         max        avg         max        avg    max size   min free         max        avg         max        avg
    20080626    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080625    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080624    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080623    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080622    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080621    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080620    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080619    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080618    0    0    0           0          0           0          0           0          0           0          0           0          0
    20080617    0    0   99      17,240      9,685      97,730     97,575   10485,760  9,023,492      22,430     21,205           0          0
    20080616    0    0   99       7,260      3,978     101,340     97,418   10485,760  9,057,327      21,940     19,447           0          0
    20080615    0    0   99       1,390      1,088     101,330    
    99,113   10485,760  9,162,058      16,199     15,970           0          0
    Best Regards,
    Vinod

    Try stopping the SAPOSCOL NT service.  Then, copy this folder (making a backup):
    installdrive\usr\sap\prfclog to installdrive\usr\sap\prfclog_old
    Then, clear out everything inside of installdrive\usr\sap\prfclog
    Also, doens't hurt at this time to check the credential of the user running your SAPOSCOL, typically it should be the same as the user running your SAP instance.
    Start SAPOSCOL and wait for the OS collector job to run. Give it 24 hours, come back and check.

  • 3.2.09.30 on Win 7 (64bit) -- help not showing up

    Nothing is showing up from either Help->Search or Help->Table of Contents. A task named "Help Center" does appear in task manager but switching to that task has no noticable affect.
    As indicated in the subject, this is a new install of 3.2.09.30 on a Windows 7 64bit O/S. However, just before posting this I decided to try it from the previous SQL Developer version (3.1.07.42) which I still had installed and the same thing happened there. That explains why I didn't see anyone else complaining about it.
    Still.... I would welcome any ideas on how to diagnose/fix it. The problem with the Help not showing up is the only issue I have noticed.
    Edited by: Brad_Peek on Sep 2, 2012 8:08 PM

    Hi Brad,
    Have you at some stage had a second monitor screen connected to your computer?
    If so, then one possibility is that you displayed SQL Developer Help on that second monitor. Next time you use Help it will attempt to display it in the same place (even if the monitor is no longer connected).
    I believe when you upgrade from version 3.1.07.42 to 3.2.09.30 it will preserve this setting.
    To make it visible again, you can either reconnect the second monitor, or you can move the Help window back onto the main screen as follows:
    1. Bring up the Help Center (so that it should be the active window)
    2. Type Alt Space (This opens the drop-down menu for the window.)
    3. Type M (This selects the Move option on the drop-down menu.)
    4. Use the left or right arrow key to move the window. (Once you've started this, you will find that you can use the mouse to position the window on the screen.)David

  • Lightroom 4.1 can not show text correctly

    lightroom 4.1 can not show text correctly when publish in PDF and blurb format
    the text can be show correctly in JPEG format
    but lightroom 4.0 can show correctly with the same book.
    i cant publish my book on blurb now

    I don't think LR4 adjustments can be directly sent to CS4, because CS4 cannot interpret LR4's new processing engine.
    I think you have to use Edit In... and create a TIF or PSD and send those to CS4

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • Value Help Not Working and Values Not Showing in BPS0

    I have custom characteristics transported from a BW 3.5 system to a NW2004s.  I have maintained master data and activated master data.  When I try to do the value help selection from inside maintain, I don't see the characteristic values.  In BPS0 the values are not registering and the variables are failing cause they say there are no master data values.  How to resolve?
    Thanks,
    Cherie

    I also noted the anomaly only occurs with custom characteristics, transported from a 3.5 system to a NW 2004s system and have NO attributes assigned to the characteristic. Those custom ones that have attributes show up fine.

  • In return sales order(va01)  return amt value is not showing plz help

    DEAR,
    Issue : When Sales Order, Delivary, Transfer Order, Billing is created by one user , and if the same user creates Sales Return Order(VA01) it is working fine. But if any other user creates this Sales Return then it is not showing Sales Return AMOUNT value which has to be copied from the Billing Dcoument.
    This Sales Return transaction calling Form Routine which contains code to get Sales Return value . when same user who created Sales Order, Delivary, Transfer Order, Billing creates Sales Return then SPA/GPA PARAMETERs used in Form Routine program to get Reference Billing Document no.,etc , are getting populated by values , but if different user creates Sales Return this SAP/GPA PARAMETERS is not getting populated. i.e
    DATA V_VBELN TYPE VBELN.
    GET PARAMETER ID 'VF' FIELD V_VBELN .
    why it is not getting populated plz help

    Hi,
    When you create a return based on a complaint, you:
    Post the goods to your warehouse for checking
    And then, implement one of the following activities:
    Approve the complaint and create a credit memo
    Approve the complaint, and implement a free of charge subsequent delivery based on the return
    Reject the complaint
    Process Flow
    You create a sales document with the order type for returns. You can create the return in one of the following ways:
    – Without reference to an order
    – With reference to an existing order
    – With reference to an invoice
    You can block the return in Customizing, so it is not invoiced. Go to Sales - Sales Documents - Sales document header - Define sales document type in the billing block field in the billing section.
    If the returned goods are sent to your warehouse, create a delivery (returns delivery) with reference to the return.
    The goods issue posted for the returns delivery matches the goods receipt to your own stock.
    After you have checked the goods, you can implement one of the following activities for the complaint:
    Approve it by deleting the block reject it by entering a reason for rejection.
    The quantity for which the customer should receive credit.
    The order quantity rather than the delivered quantity is used as the basis for the credit memo.
    If the customer returns only some of the goods and disposes of the remaining goods himself, you can still create a credit memo for the full amount.
    On the other hand, you can create a partial credit memo for certain items even if the customer returns the entire quantity. To do this, the quantity to be ordered in the return has to be reduced to the quantity to be credited.
    Whether the customer should receive a replacement.
    If the customer is to receive replacement goods, do not create a credit memo.
    You can enter a reason for rejection for the appropriate items in the return. You then create a free of charge subsequent delivery with reference to the return in order to send the replacement goods to the customer.
    regards,
    Siddharth.

  • Inventory Non cumulative values are not showing correct result

    Hi Guys,
    I have created a report on Inventory cube taking material in rows and 0T0TALSTCK and 0VALSTCKVAL in colums and i created a variable on calender day . What ever the date if we give we will get the quantity and value as on that date.
    Here Quantity is showing perfectly and in case of value it is showing wrongly. In this case the interesting thing is if we substract the  (Reciet value - Issue ) value then i am getting the correct value.
    Some times Even quantity is zero the noncumulative keyfigure (0VALSTCKVAL)is not showing zero it is showing some value but if i do (Reciet value - Issue ) it will show correctly.
    Please help on this issue.
    Thanks & Regards
    K.Srinivas

    Hi,
    when the quantity is correct, then you have a problem with the values. You have loaded the infocube correcly.
    check your keyfigures and the transformation with the BI content.
    => for example: do you have the coding in the BF transformation?
    * see OSS note 571669
        LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
          IF <SOURCE_FIELDS>-stockcat EQ 'V' OR
             <SOURCE_FIELDS>-stocktype EQ 'V'.
            DELETE SOURCE_PACKAGE.
          ENDIF.
        ENDLOOP.
    => you have used the datasource 2LIS_03_UM. There are no quantities. Is there your problem.
    Sven

Maybe you are looking for

  • Creating a header for a .CSV file

    Hi, I have looked through the forums and cannot find a solution for creating a header for a csv file.  I am using Labview 8.2.  I want a label for each column at the top of the file and then I will append new rows to the file as the data is collected

  • TransformerException: A location step was expected following the '/' or '//

    I'm new to using the JAVA API to transform XML to HTML via XSLT I am attempting to create an application that generates this html file. I can generate the file through the command line with no problems. I don't know if it's because my folder name has

  • Alarem in mail after wake up

    I often have this problem, when i wake up my mac book from sleep by pressing on the space bar mail will generate an error alarm repetedly, untill i click on mail app and then press on the space bar again. This seem wrong to me, does any one have a fi

  • Building a dynamic dialog in Acrobat with Javascript

    I am attempting to figure out how to build dynamic dialogs within Acrobat using Javascript. I am attempting to write a generalized PDF page splitter.  The user selects a PDF document, and then the script analyzes the open document and determines that

  • HT204266 How do I permanently delete an app

    I have a number of Apps that I have upgrades from Lite to full or that I no longer want.  I can stop them appearing on my iPad when I sync, but want to get rid of them completely. Do I delete them from my computer to do this? Thanks Pat