Variables Panel not working 100%

Is anybody else having the problem; When you select a linked image on the artboard you should have the option to " Create a Linked File variable:
Select a linked file and click the Make Object Dynamic button in the Variables panel." That is right out of the Adobe Illustrator reference. When I select linked files the button to make object dynamic is greyed out.I see no other way to continue(CS6) also reading about similar problems in (CS5).
Every other feature seems to work just like the manual says.
Thanks

Yes that was exactly my problem. Thanks! I was just placeing the image and forgetting the Link checkbox. Worked like a charm my variables panel now has the option. Thanks again!

Similar Messages

Anchor links to accordion panels not working properly across browsers

Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
Joy

Hi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy

Variable Text not working as dynamic header in Crystal report

Dear Experts,
I'm working Crystal report that connected to Query BEX SAP BW trough SAP integration kit,
currently i have case that need report dynamic header using variable text from BEX query, but seem the variable text not working in Crystal reports. the header in Crystal report shown as Desription\technical name, not result from the variable text in Query BEX in SAP.
In https://wiki.sdn.sap.com/wiki/display/BOBJ/Crystal%20Reports%20and%20BW%20query%20elements stated that the "Text variable" with "replacement path" is supported, but i don't know in my query is not working.
i already set in Database -> options-> table and fields -> Show Both, but the text variable still not working.
can you help me
Crystal Reports 2008 12.2.0.290
SAP Integration KIT 12.1.0.890
Thanks
Luqman

Post your question BEX and B1 and classic SAP data source issues to the Integration Kit forum

Why do my panels not work in CC 2014

I made my own panels in CC but they don't work in CC 2014. I miss them.

It's the latter. Thank you for answering my question.
Op 21 jun. 2014, om 09:42 heeft Trevor Dennis <[email protected]> het volgende geschreven:
Why do my panels not work in CC 2014
created by Trevor Dennis in Photoshop General Discussion - View the full discussion
Are you talking about a custom workspace, or actual panels made with Configurator? If the former, then go Preferences > Sync settings. If the latter, then those Flash panels no longer work in CC 2014. Check out any of the multiple threads about Extensions being greyed out.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6481073#6481073
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

SELECT INTO ( variable ) STATEMENTS NOT WORKING FOR SYBASE TABLE AS VIEW

Dear Experts,
We have connected our 9i db with Sybase db using Hs connectivity.
and then we have create the view in oracle db for SYBASE_TABLE as SYBASE_TABLE_VIEW.
ALL THE INSERT, UPDATE AND DELETE COMMANDS ARE WORKING BUT THE
select Into (variable) is not working.
Please help to resolve the select into statment which is in BOLD in the below routine
PLEASE NOTE! FORM WAS COMPILED SUCCESSFULLY AND FORM IS RUNNING BUT SELECT INTO COMMAND IS NOT WORKING.
Thanks & Regards
Eidy
PROCEDURE SRBL_INSERT IS
CURSOR SRBL IS
     SELECT impno,impcod,impnam
     from oracle_table1 a, oracle_table2 b
     WHERE a.impcod=b.empcod
     v_srpcod varchar2(5);
BEGIN
FOR rec in SRBL loop
     begin
select "im_code" into v_impcod
     from SYBASE_TABLE_VIEW
     where "im_code"=rec.impcod;
exception when no_data_found then
     v_srpcod:=null;
end;
END LOOP;
END;
Edited by: Eidy on Aug 16, 2010 11:28 AM

hellow
try this.
select "im_code" into v_impcod
from SYBASE_TABLE_VIEW
where "im_code"=rec.impcod;
v_srpcod := v_impcod ;
........

"Photos" option button in icloud control panel not working

Photos option button in icloud control panel not working...it is not greyed out, and it is ticked, but clicking on it has no effect. Windows 8.

luvsack wrote:
DOES ANYBODY RESPOND TO THESE QUESTIONS EVER? I HAVE THE SAME PROBLEM AND CAN FIND NO ANSWER ANYWHERE! ANSWER THE **** QUESTION PLEASE!!!!!!!!!!!!!!!!!!!!!!!
Windows 7 64
Start your own thread, and please stop shouting, it is hard to read, and who wants that.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Customer Ext Variable is NOT working correctly in the Restricted Key Figure

Hi all,
   I have created a variable ZVCBLMTH (Period from 01/1996 to Last Month) with reference to
    0CALMONTH and it will be populated through Customer Exit and it works fine.
    In the selection for 0CALMONTH, I gave the range as '05/2008' to '08/2008' and this new
    variable passed the value of range as '01/1996' to '04/2008' in RSRT.
    The properties of the variable are:
          Type of Variable - Characteristic, Processing by - Customer Exit, Variable Represents - Interval
          and Variable is - Optional.
          No change in the result after changing the 'Variable is' from Optional to 'Mandatory'.
This variable is used in Restricted Key Figure to calculate the number of matching records between
   01/1996 & 04/2008 and somehow it is not recognizing this variable and NOT passing the results correctly.
   But, there are records with 0CALMONTH between 01/1996 & 04/2008.
   How could I test that which value is passed into the Restricted Key Figure for this variable, PLEASE ?
   Thanks in advance.
Regards,
Venkat.

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Remote Panel not working in Windows 7 Starter

Hi all,
We have an application that can be controlled via remote panel. This is working fine in Windows XP PC. But when I try to access the same by opening Internet Explorer in a PC running Windows 7 Starter OS, I only get the 'Downloading 0.00% of 0 bytes'. I have disabled the Windows Firewall and there is no antivirus software also. What could be the reason for this? How could I solve this?
Thanks in advance,
Priyadarsini
Solved!
Go to Solution.

The system which had the problem was a netbook that came with Windows 7 Starter. We found out recently that there was some parental controls utility in the netbook that prevented the LabVIEW Remote Panel access. We were not aware of its presence & it had not shown any indication that it had blocked Remote Panel communication. We uninstalled this utility & the Remote Panel started working as intended. Thanks again for your help.

Color Laserjet pro MFP M176n control panel not working

the control panel in the Color Laserjet pro MFP M176n is not working, is all blank, i can´t see anithhing in it. Is there a reset button or should i take it to the store where i buy it for a checkup?
thank you

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Variable Substitution not working when using ABAP mapping

Hi all,
I am doing an IDoc to File scenario.
Due to some complex mapping requirements, i had to use ABAP mapping for IDoc to File ( IDoc : SHPMNT05)
There is also one more requirement where in i need to generate the receiver filename dynamically
i.e the filename is of the form :
GW-XYZ-DD/MM/YYYY.csv
Where
XYZ is the Shipment number (E1EDT20- TKNUM)
DD/MM/YYYY is the IDOC creation date in ECC (EDIDC-CREDAT)
so i used the variable substitution option in receiver file adapter.
But its not working.
Is there any limitation for using the variable Substitution, doesnt variable substitution work in case of ABAP mapping?
Regards,
Loveena.

Hi,
u written ABAP mapping program to get the file name in the required format ,
is it rt?
when u test it at message mapping(including ABAP map program)
u get the the required format of file name in the one of target filed.
if that was fine, please check the variable substituiton parameters at receiver file adapter.
i mean, are u maintain variable name and refernece.
u have to specify the payload information.
warm regards
mahesh.

Effects Panel not working correctly

I have Windows 7 64 bit, Home Premium and using PSE9. When I open PSE in Full Edit and go to the Effects Panel, the Filters work just fine, but the Layer Styles will not open (or show anything) and the Photo Effects will not open ( or show anything). I did rename the MediaDatabase.db3 file as MediaDatabase.old, following instructions given in a PSE9 class I am taking....but have done nothing else with that file, and then is now a new MediaDatabase.db3 file under the "old" listing....so two files there.
I have no idea what to do to correct this....and I did close everything and close PSE and also my PC...let them rest a while, and then restarted the PC and reopened PSE9, and still the Layer Styles and Photo effects did not work. I hope someone can understand my problem and help....in simple "baby steps". Thanks

Should I delete the file named mediaDatabase.old? I am a senior
"dummie" and just want to be sure what you are telling me.
I did delete the editor's pref files....I understand that one.
Thanks for your help.

Variable is not working

HI Experts,
can any one suggest me on this issue . When i enter 0Material variable range selction the data is not retriving .the data has there in 0material master data. if enter other range like date with out giving materila the data is displaying . i checked user defined variable and customized variable its not displaying . but the same variable it working in quality system and its problem in production system so any one suggest me on this issue.
Regards
Rk

Hi,
Thank you very much for your reply . User has been raised some other requirement . here 6 variables containg and out of 2 are mandtory. if the user enter the one of the optional slection screen and 2 mandatory variable also be optional. if the user is not entring the optional the 2 remains mandtory here same variable act like optional and mandatory. if it is possible In please let me know.
Regards
Rk

Flex Time with variable tempo not working correctly.

Hey,
Has anyone else noticed that Flex Time doesn't work as intended if you have variable tempo?
To clarify, I recorded a band playing their song and then figured out their various natural tempo changes and adjusted the Global Tempo Track accordingly.
Then, the drummer recorded his part to a click on that track, obviously keeping with the natural tempo changes that the band played to.
Quantization of MIDI works just fine, as in, it matches the increases and decreases in tempo.
However, attempting to quantize an audio track using Flex Time does not work properly.
I was just wondering if there is something that I'm doing wrong or if this is a known bug.
Thanks,
William

Thank you for your answers!
But there are several Problems using a dummy field in an IDOC structure. We have got a naming convension so that we can't create an IDOC-like structure named ORDRSP.ORDERS05.
But perhaps I am thinking to complex and there is an easier way to add a dummy field to an IDOC structure.
Could you perhaps also suggest a solution for that dummy field problem?
Many thanks and kind regards,
Steven

Panels not working...need help please!! :)

Hi!
I just installed Indesign CS5.5 onto my computer. I have a PC and I am running windows 7.
My issue is that none of the panels are working properly. Basically, they won't allow me to use any of their functions. Here are a few specific examples:
-The page panel will not allow me to scroll between pages, select pages, create new pages, etc.
-The align panel- I can click on everything on this panel and no changes are made to my objects
-Library- It will allow me to drop layouts into the library panel but that is about it. As soon as I drop it in, if I click on the top corner option button I can use those options. However, if I add another layout to the library I can no longer access anything else other than the new template. None of the other functions work on it as well.
These are the panels I have had trouble using so far. I would really appreciate any help you can give me. I have spent hours trying to get this to work.
Thanks!

Sorry, there are some issues this morning withthe new forum. When my message left here it was a hyperlink, but it look like it got stripped otu, so let's try again with the URL: http://kb2.adobe.com/cps/403/kb403039.html

Variables Panel not working 100%

Similar Messages

Maybe you are looking for