Variance analysis report doesnt have any values

Hi Gurus,
For following reports I am not getting any values .Is I am missing any configuration.My client needs to be resolved on top priority.
S_ALR_87013139 - Target/Actual/Production Varainace - Cumulative
S_ALR_87013140 - Target/Actual/Production Varainace - Periodic
S_ALR_87013142 - Target/Actual Comparison - Cumulative
S_ALR_87013143 - Target/Actual Comparison - Periodic
S_ALR_87013145 - Plan/Actual Comparison - Cumulative
S_ALR_87013146 - Plan/Actual Comparison - Periodic
S_ALR_87013148- Variance Catergories Cumulative
S_ALR_87013149- Variance Catergories Periodic
Regards,
Nitin Amritkar

These reports run on summarized values. Please run KKRV for summarization by plant for the given periods.

Similar Messages

Variance Analysis Report

Hi
The users wants a Variance analysis report in such a way say there a is variance from target to acutal by cost elements detail of from where that variance come from other than from general variances categories.
Say for ex: if it is a input quantity variance of 10, they want a report showing from were that variance come from, in more detail. They don't want to go to every order at month end to look and analyse every single PO to see why the variances, is it feasible in SAP?
Thank you,
Nivi

These reports run on summarized values. Please run KKRV for summarization by plant for the given periods.

FDM 9312 Variance Analysis report and columns 1 off in xls

Hi,
I have a variance analysis report in FDM and when i run in HTML and PDF, all the columns are aligned/formatted fine. But when i run it in xls, the columns are one off. Has anyone seen this before or experienced this.
Thanks,
Azmat Bhatti

This is due to formatting within Excel. You can try to adjust the report via the report designer in the workbench. It may not be possible to run the report in Excel with the formatting you are expecting.

Display Nothing in table column heding when parameter doesn't have any value

Hi,
I created one tabular report . Report has 2 parameters(ex: A and B) both have default values from two different datasets. I am using these parameters in two column headings (col1 has parameter A and col2 has parameter B) in report. My question is, if parameters(A
and B ) don't have any value from the datasets it should display "Nothing" in the table column headings(col1 and col2). If parameters(A & B) have some value(June & July respectively) it should display in table column headings(col1 and col2).
Thanks in advance,
Visu

Hi Visu,
According to your description, you want to display the value of two parameters in two column headers. Parameter A in col1, parameter B in col2. And if the parameter returns null value, it should display “Nothing” in the header. If the
parameter return a value, the value should be displayed in the column header.
If in this scenario, in order to achieve your requirement, we can refer to the following expression in the two column headers:
=iif(Parameters!ReportParameter_name.Value
is nothing,"Nothing",Parameters!ReportParameter_name.Value)
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I downloaded a tv episode but it doesnt have any sound to it. Any ideas? can i delete the epipsode and somehow download it again? i t is a episode of a series thati bought a pass on.

I downloaded a tv episode but it doesnt have any sound to it. Any ideas? can i delete the episode and somehow download it again? it is a episode of a series that i bought a pass on.

... is this an episode of Sons of Anarchy? (Multiple reports that one episode on a season of that is not playing audio.)

How to read the Variance Analysis report S_ALR_87013139, Pdt cost by Order

Hi,
Could someone tell me how to read the variance analysis report, S_ALR_87013139 - Cumulative for product cost by order. The report has the following fields, Target (Debits),     Actual (Debits),     Scrap,     Var. Without Scrap,     Work in Process(WIP),     Control Costs.
I am looking to find how the numbers add up.
Thanks for your help.
Ram
Message was edited by:
        Ram R

Thanks Sridhar,
When I analyse the report S_ALR_87013139 - Cumulative , for a product for a period (with no scrap), I get the following
Target (Deb) -   46,855.55
Act (Deb) - 58,315.87
Scrap - 0.00
Var W/O- Scrap - 11,269
WIP- 0
Control Cost - 0
Here Actual - Target is not equal to Variance. What could be the issue?
Could you please tell me how SAP would update this report with target & actual costs with respect to open production orders, carried over from previous periods.
Thanks,
Ram

How to hide one column in Alv if it doesnt contain any value

Hi,
In alv Grid if one coulmn doesnt conatin any value.I doesnt want to display in ALV grid.Is dat possible. Plz help.

Hello Anu
When you prepare your fieldcatalog check the column of the output itab for its contents, e.g.:
" Itab GT_FCAT contains fieldcatalog.
" Itab GT_OUTTAB contains ALV list data.
" Condition: column "MY_COLUMN" should contain at least single value > 0
LOOP AT gt_outtab TRANSPORTING NO FIELDS
                 WHERE ( my_column > 0 ).
    EXIT.
ENDLOOP.
IF ( syst-subrc NE 0 ). " Column "MY_COLUMN" contains no value > 0, then hide column
    READ TABLE gt_fcat INTO ls_fcat
              WITH KEY fieldname = 'MY_COLUMN'.
    IF ( syst-subrc = 0 ).
      ls_fcat-no_out = 'X'. " not displayed, but visible in layout
      ls_fcat-tech = 'X'.     " not displayed, not available in layout
      MODIFY GT_FCAT FROM ls_fcat INDEX syst-tabix.
    ENDIF.
ENDIF.
Regards
Uwe

I have just downloaded harry potter and deathly hallows part 2 and it doesnt have any of the special features or itunes extra, is there anyway you can fix it?

i have just downloaded harry potter and deathly hallows part 2 and it doesnt have any of the special features or itunes extra, is there anyway you can fix it?

That's right. You cannot. Sorry.
B-rock

When you get the new iPhone 5S they say it come with al the iWork apps for free install already. But if i restore from back-up from an old device which doesnt have any iWork apps would I still receive those iWork Apps?

When you get the new iPhone 5S they say it come with all the iWork apps for free install already. But if i restore from back-up from an old device which doesnt have any iWork apps would I still receive those iWork Apps?

Hey Davin12,
Yes. The apps are not pre-installed, but rather you are prompted to download them the first time you launch the App Store in iOS 7:
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
iPhoto, iMovie, Keynote, Pages, and Numbers are free on the App Store for qualifying iOS 7 compatible devices activated or purchased after September 1, 2013
The first time you launch the App Store in iOS 7 on your qualifying new or factory refurbished iOS device, you will be offered iMovie, iPhoto, Keynote, Pages, and Numbers for free in addition to other free software from Apple. When you tap Download All and sign in with your Apple ID, the apps will be downloaded to your device and added to your store account. If you tap Not Now when you see the offer, you can go back to each of the apps in the store and download them one at a time for free.
Thanks,
Matt M.

Summarized Analysis - Variance Analysis report Problem

Hi Guru's
When Executing the Report "S_ALR_87013139 " of Order Variance analysis - Sumarization Report we are not able to fetch any data for the current year.
But when we are checking for 2008 we are able to fetch some data but with wrong values
We wanted to know whether any additional configuration has to be done to fetch that data
Your help will be greatly appreicated
<< Moderator message - Please do not promise points >>
thanks in advance
Best Regards,
Ravi Reddy
Edited by: Rob Burbank on Dec 15, 2010 5:05 PM

Hi Christian
Thanks for your reply i have one more doubt regarding the report " 7-KA2-K-P1" to modify that report does it generate a Workbench Request or a Customizing request.
I am asking this because as per my Clinets requirement i need to add few more columns.
Best Regards,
Ravi Reddy

SSRS 2008 R2 Report parameters have default values and report not to auto run

Hi, I am using SSRS 2008 R2 one of my requirements for a Report is all the parameters have default value and I do not want this report to auto run when users open this report. I can create a dummy hidden parameter to break the auto run for this
report. But I am looking for solutions other than that.
Thanks in advance..........
Ione

Hi lone,
According to your description, you have a report with parameters. Now you want you report not to run automatically with your parameters default values. Right?
In Reporting Service, if you have parameters with default values in your report, your report will always auto run with these default values. We can say these default values are used for report running initially. So for your requirement, if you really need
to see your default value before the report running, the best workaround is set one more parameter to break the auto run like you have done. If you just want your report not to auto run, your can achieve it by removing those default values.
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

MDM iView Wizard: Search Table doesnt populate any value.

Hello all,
I am trying to create MDM Resultset IView using MDM IView wizard in portal.
I do not get any value in the dropdown of Search Table.
I have created an MDM system and assigned a repository to it.
The wizard doesnt allow me to go ahead without selecting search table parameter from the dropdown.
Techincal details:
MDM: 5.5
EP:- 2004 SP 16.
Please give me your valuable inputs.
Ashutosh

Hi Ashutosh,
After creating an MDM system and assigning a repository, you need to right-click on the system, and then choose System Aliases. Define an "alias" and save it.
Now go to User Administration -> Identity Management.
Select the User/Role/Group you want to assign to the System.
Click the User Mapping for System Access tab, and click Modify.
Select the system alias from the drop-down box, and map it to an MDM user. Note that in NW 7 (NW04s), the user must have a password, so you may need to configure this first in the MDM Console.
Save the mapping, return to the System Administration -> System Configuration screen.
Locate your system, right-click it, and select Connection Tests. Test the connection. If it succeeds, you are now ready to create MDM iViews using this system.
This information can also be found <a href="http://help.sap.com/saphelp_mdmgds55/helpdata/EN/45/c8cd92dc7f4ebbe10000000a11466f/frameset.htm">here</a> in the SAP Help Portal.
Regards,
Walter

HT201322 mine doesnt have any of those apps (app store, itunes store, ibook), it doesnt even have the camera app, but the ioad itself has a camera

hey, my ipad doesnt have a sim card port so im guessing its the model that uses only wifi. but, it doesnt app store or itunes, and i cant sync any app into it from my itunes on my pc, i really dont know what to do. i dont know how to get the apps, it has a camera both front and back, but it didnt come with a camera app........HHHHHEEEEEEEELLLLLLLLPPPPPPPPPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!

Hello there, GraceJohn.
Your best bet is to restore the iPad and get the original operating system software back on the iPad. The iPad should have all of those applications included in factory setup:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Thankf for reaching out to Apple Support Communities.
Cheers,
Pedro D.

IDOC Invoice posting, LC3 doesnt have any amount.

Hi GURUs,
I have an IDOC invoice posting. Inside this document, I have line item which LC3 dont have any amount. Document Currenty, LC1 and LC2 have amount, only LC3 dont have any amount.
For all these items, they are having same material number.
Any possibility or idea what have cause this kind of entry? Thanks.

we have similar scenario in EU. One company code exists in SKK currency and that company supplier to customer in other EU. Now that company code swtiched to EUR currency (with toher co.code) and using EUR to EUR as LC3
~Thanks!
Rajesh

Why does my iPhone say it doesnt have any more storage?

My phone had about 250-300MB of free space. Then, I synched it with my computer. It said I had to delete some stuff because it didnt have enough room to synch. So I deleted about 1GB of apps, and as part of the synch, I updated 2 apps that were around 50MB combined. Keep in mind these are basically replacing apps that were already on the phone. Now, it still says I dont have enough room to put them on my phone, and iTunes is telling me I am 314MB over capacity. If it all fit on there before, and I only put 50MB on there but I took 1GB off, how is this possible? I have an iPhone 5 and the latest version of iTunes.

GT024 wrote:
Why does my Iphone say it doesnt have enough storage?
NOT ENOUGH FREE SPACE iOS
See Here > 'Not enough free space' alert when trying to sync
From Here > http://www.apple.com/support/iphone/syncing/

Variance analysis report doesnt have any values

Similar Messages

Maybe you are looking for