Variance in MB5B and MMBE / LS26
Hi There ,
The stock on Posting date ( T Code - MB5B ) shows zero till today, where as the Stock overview MMBE / LS26 shows the correct figure as required .
Could anybody throw some light regarding what exactly is the logic behind the MB5B report . To my understanding MMBE / LS26 should sink with each other .
Thanks in advance for your kind help !!!!!!!!!
With Warm Regards
Manoj
Hi All ,
Thanks to all of you for your kind and quick reply .
As per the request from Anand ..The MB5B shows stock received as well as stock isssued till 12-12-2006 is same , so the stock available is zero . but on the same date 12-12-2006 System allowed to do Transfer Orders with a quantity ...my presumption is that if the stock in MB5B on 12-12-2006 is zero then how System allowed to do a posting of TO with a quantity ..
MB5B I believe includes the unrestricted stock ..
Kindly assist ...thanks again in advance for your kind help .
Best Regards
Manoj
Similar Messages
-
Variance between MB5L and MMBE
Dear all,
My client finds the variance between these two t codes for one specific material.that s why they are not able to pass the balance sheet.
Please let me know the possible reasons. Kindly let me know through functional side instead of going through tables.
regards,HI
MMBE gives the total stock in the plant for a particular material, and the storage location. It also displays the correct Batch to which the stock belongs.
The total stock for this beit in unrestricted use, Blocked stock, return stock, Quality stock all is shown in this MMBE
MB5L gives u the stock position as against the date. U can select the current period, previous period or the fiscal yr which is desired.
Also the stock as per the val;uation class and the G/L account concerning the vauation class is displayed.
Hope this helps.
Regards,
Prasanna
Award pls if helpful -
%variance between parent and child hierarchy
Experts,
How to calculate a percentage variance between parent and child hierarchy.
Ex: parent is 80 and child is 20 so I need a %variance between 80 and 20.
Thanks in advance.Hi Nikki
Create structure and restrict parent hierarchy with one node and child hierarchy with another node and create formula node to calculate the percentage variance between two nodes.assign points if helpfful.
Regards
Murali. -
If stock variance between books and physical stockin sap what we will do
Hi,
plz any body explain for this questions
1.if the price variance between gr and invoice in this case what we have to do
2.if stock variance as per books and physical stock in this case what we have to do
thanks
byeHi,
Pls. see following for your query.
1)if the price variance between gr and invoice in this case what we have to do
Maintain Account Assignment for FI-MM integration with T Code OBYC. Select Transaction PRD and maintain GL Account for Price Difference for the Chart of Account. This account will be posted for the difference between GR and Invoice.
2) if stock variance as per books and physical stock in this case what we have to do
There is a process called Physical Inventory.
T Code MI01 - To enter Physical Count of the Material.
T Code MI07 - To post the difference between the system stock in SAP and the Physical Count of the stock to get the stock in system matching with SAP.
Usually, the material is blocked for the posting during the process of Physical Count to avoid any posting of material for which physical issue or receipt is yet to happen for better reconciliation.
Hope this helps. If helpful, reward suitable points.
Regards
Chirag -
Differne between MB5B and MB5L
Hi,
can anyone tell me difference bet MB5B and MB5L. When I take MB5l for current stock compare
with MB5B current period stock it shows difference why?
Edited by: Anil Patil on Feb 28, 2009 2:39 PMHI Anil,
Here is how it is classified.
MB5B:
The report Stock for posting date lists a company's own stocks in a
particular time period (earliest date 0h00, latest date 24h00).
The posting date is used for selection. Note that the posting date may
be different from the entry date (date entered in the system) as well as
the document date.
Starting with the current stock balance, the report uses the material
documents to calculate the stock balance for the specified posting date.
MB5L:
The report List of stock values: Balance display is used to display the
total quantity and value of the stock of one or more materials at plant
and storage location level.
In addition, the system determines the stock account to which material
is posted in the case of a goods movement.
You can display the balance values for each company code and G/L
account. The balance of the G/L account is compared to the stock value
of the specified material, and any deviation between the two totals is
indicated.
BR,
SD. -
Difference between CO09 and MMBE Transactions
Hi All,
Please let me know difference between CO09 and MMBE Transactions.
FOr particular material and plant ,Quantity 1 is there as FGI in MMBE screen but it is not there in CO09 for same material in the same plant.
Regards
NidhiDear Nidhi Srivastva
MMBE(Stock over view ) : By using this transaction code we can get the information pertinent to the particular material stock levels in the respective plant and storage locations.
With the help of the detailed display we will know wether the material is in transit mode ,restricted ,unrestricted and so on........
CO09(Avilability overview): With the help this we will know when the order was raised and the confirmed quantities.
Apart from that we know about the goods issues and goods recites of respective plant.
Please let me know if you have any further clarifications
Thanks&Regards
Raghu.k -
Difference Between MB5B and MB52 Stock
Hi Expert,
Please tell me what is the difference between tcode mb5b and mb52.In our system MB5B Valuated Stock Qty and Value is not Matching with MB52 (Unrestricted + GIT+ stock in QI) stock and value.Hi,
T-Code
MB5B : Stocks for Posting Date
This will allow you to display the stock between the given period,
MB52 : List of Warehouse Stocks on Hand
This will allow you to see avialable/current stock on hand.
hope this makes you clear or else are you looking for anyhting more,,,,
Regards,
Kiran. -
Mismach of stocks in MB5T and MMBE
Hi Expert,
I have one STO for which when I am looking stock in transit stock in MB5T and MMBE, it is mismatching. why is it so??Material used in STO contains oil specific data.
Regards,
Yagnesh BhattHI,
This might help you...
MMBE VS MB5T
In MMBE you have to specify one material number - generically search is
not allowed. The transit stock in MMBE
In MB5T you can enter multiple material number - or search for all
materials in transit by leaving the material filed blank. MB5T shows the
relation between purchasing documents and the quantities in transit.
MEFE is used to print scheduling agreement schedules. Previously
purchasing print functions were handled with ME90. The transaction got
specified to
ME9A Message Output: RFQs
ME9E Message Output: Sch. Agmt. Schedules
ME9F Message Output: Purchase Orders
ME9K Message Output: Contracts
ME9L Message Output: Sched. Agreements
IT MEANS stock exists only at plant level, like subcontract stock or else stock in transit, please execute mmbe, if any stock is in picture then click quanity and go to the menu -->environment, select material movement then you can find how it happened in what transactions,
else use t code mblb, mb5t to fetch these stocks
pherasath -
Stock Quantity at Mc.9 and MMBe is not Matching
Hello,
The stock Quantity for a prticular material in MMBE is not matching with stock qunatitty in MC.9 and Mc.5
Can you please suggest me how to resolve this.
Thanks & Regards,
SAGARHello,,
MMBE is the correct value for the current stock quantity. MC.9 and the other reports use tables S031/S039 or thereabouts, which is updated incrementally each month using the previous month's record and the issues / receipts during the month. Once the file gets corrupted - and it does - in our case about 5% of records are incorrect - that incorrectness is perpetuated in the following months, and the difference remains forever.
You can determine that the S031 record is in error by starting with the current month and looking at the Val stk rec qty and the val stk iss qty movements and the valuated stock, which will allow you to calculate what the stock at the end of the previous period should be. Run MC.9 for the previous period, check the valuated stock corresponds to that calculated, and repeat with the movements. You can do this in yearly periods until you find the error and then go down finer. I find that most of our corruption occurred in the first few months of using SAP.
If anyone knows of a method to regenerate the whole record in the S tables
I would be grateful for the info.
Conclsion:MMBE reads the current stock, while MC.9 or MC.5 are transactions that are feeded from infomation structures (which are updated with lower priority than stock tables). If an update of a infostructure fails, then there is no harm to the stock table update, but your statistics are just out of sync then.
So in short, you can trust MMBE, but no the statistic transactions
Regards
Mahesh Naik. -
Code for calculating variance between plan and actual in Co module
Hi Abbapers,
I have to develop a 2 fresh report : One for calculating the variance for the Plan/Actual in controlling and second for sales variance for the month Jan to Dec .
I need your help as I have to complete this reports in this week . Its Bit urgent.
Can you please help me with the sample code or any of the similar report which you might have created as I am bit new in ABAP. Please reply asap.
Thanks in advance!
Best Regards.Hi Deepak,
For Finished Goods materials if you assigned Price control V (Moving Average) it is irrelevant to run the Standard Cost Estimation.
My earlier client we don't have variance because of the Moving Average Price for Finished Goods.
Please check, It is really required Variance?? If it is required check whether variance key is automatically assigned to Process order or not. (Control Tab)
Ravi Polampalli -
Hi Fnrds,
When in execute the MB5B Report for one of my finished products , i get some variations .
In the Stock type tab i have two options :
a) Storage Loc/batch stock
b) Valuated Stock .
When i execute( Current month ) this repot with option A and then with option B i am getting a variation in my closing stock.
Out of 500 material i am getting variation only for one material . what could be the reason for this.
Regards
RakeshHi rakesh,
Check the particular material whether the material type have the valuated or non valuated stock.
If non valuated then OK. the stock difference is correct.
becuase the S. loc stock contain valuated & Non valuated stock.
SAM
Edited by: Saminathan Gopalan on Jun 11, 2010 12:01 PM -
Report for date variances between delivery and goods receipt date
dear guru ,
i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
Do you help me ?
ThanksHi,
Use Report ME80FN and here check the delivery schedule option in output screen. -
Serial number and MMBE report inconsistent
Hi friends,
I have a situation wherein in IQ02, for a material and serial no. the entry is there .i.e. say a material M" has a Serial no.say S1 present in plant BOM, storage location1000.This is seen as I go to the S.No. history it shows the last transaction as :- a document no. with Mov type as 101 for the above mentioned storage location and plant on a particular date.
But if I go to MMBE, the same material is not found in the above mentioned plant and S.No.
Can you explain what could be the reason. How does the S.No. and material disappear form MMBE while the S.No. history of that particular material with M.Type 101 is available.
Please advise
Thanks and Regards
RajeevHi
Even through you don't need a equipment and do not opted for "always create with equipment", you have to maintain number range for equipment.
Because, whether equipment is created or not, the EQUI table updation will takes place during creation of serial number.
Per each serial number, one equiment number is consumed, though it is not created.
Hence maintain number range for your euqipment in PM, your problem will be solved.
warm regards
sairam akundi -
Non cumulative - some differences between MB5B and a clone of the 0IC_C03.
hi experts,
I have a matter with the stock values who are differents between the result of the MB5B transaction (R/3), and a result of a query for the major materials and for a set of plants.
the data flow and delta was built in 2006 with all the supports (how to...etc).
we didn't have any problem until the necessary managment of the volume of the incube (named PQCGB15) : a weekly removing of the oldest periods (we keep 2 years online).
in fact, we have an unmatched results for the plants onto we have done removing. for the recents plants (after deployments) there is no difference.
this removing method was approved by SAP (we opened a post in 2009 #762555) and was built classicaly with the transaction DELETE_FACTS...and a modification of the predicat of the generated report, to obtain a : ... where 0CALDAY < 'DATE' ...
there is no TIME DIMENSION char available, we used first 0POSTING_DATE and replace the characteristics into the abap.
I've just taken in account this subject :
I launched the MF RSDV_VALID_RECREATE : no effect.
I found some notes for exemple 1548125 : I've checked the result between the infocube and the query => no difference found.
there is lot of notes and "literature" for this subject ... but much redundancy.
Before to propose to redoing an "init" from the datasources (with lot of works, no historical), I like to know how did you build your deletions of oldest data for this kind of infocube, and if someone have a method to find what's wrong.
thanks experts,Could this be because of Non-cumulative Ref.characteristic set as 0CALDAY in the cube?
I tried creating a seperate dimension for posting date and added a ZCALDAY mapping the posting date to it, this works fine as expected shows one posting date per material document number. -
Exchange rate variances between Primary and Secondary Ledger
We have a little problem on our hands.....we are implementing dual ledgers with dynamic posting, primary in Canadian Dollar and secondary in USD.
Exchange rate variances would occur if for example, we consider material transactions at different points in time. We would have no problems in the primary. However, CAD to USD exchange rates are updated monthly and very likely, rates would change month to month. Therefore, exchange rate variances would happen frequently in the secondary ledger.
We have been asked by senior management how these variances would be handled by EBS. Just wondering if you have ideas though we are looking into the accounting events in SLA.
Thanks,
SanjibIf the requirement was to maintain balance in USD and Canadian dollar, You can use the Reporting currency option instead of Secondary ledger.
Regards,
Chirag
Maybe you are looking for
-
How can I delete messages on phone(5c)and have them simultaneously be deleted on computer
how can I synchronize deleting messages on iPhone 5c and my computer MacBook Pro (10.7.5)
-
Downlaod file in Application server in tab delimited format
Hello, Any sample code on the above Mentioned topic or any help plz.... Thanks in Advance
-
CProjects 4.5 availability?
Hello, according to the product availability matrix the collaboration suite 4.5 should be released at the end of june. Has someone already seen it in the swdc or knows the date it will be released? Thx, Max
-
HP Pavilion dv7 2230sa problems powering on
Recent fault developed with Notebook. Pressing power on button fails to produce any lights or start notebook. Temporary solution, remove battery, wait several minutes re-insert battery plug in mains cable, wait about 5 mins then pressing power butt
-
Gurus, Can I change the dbid of a databae to whatever number I want?