Variant config can be used for STO orders

If the object dependecy assigned in super BOM , when we create a sale order for config material ( header material ) the characteristics field will appear based on that we can select accordingly
The similar concept can be applicable for STO orders also or not
During creation of STO for the supplying plant whether the characteristics field will appear or not

There is no need for the Characteristic value entry screen pop-up on ur STO. The STO will be a result of some Order, where the pop-up would already have been configured using the char's.
Your STO is just the vehicle to replenish the demand against an order.
Let me know if you have more questions
cheers

Similar Messages

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

Which user exit can be use before production order creating?

which user exit can be use before production order creating?
i want to check AFPO data,then show error message before production order creating.
1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
2.i try to use PPCO0007(Exit when saving production order),
i can show error message,but i can't check AFPO's data.

Hi,
You can access AFPOD structure using field symbols.
Try below mentioned code in routing:
constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
data: wa_afpod TYPE afpod.
ASSIGN (c_afpod) TO <fs_afpod>.
wa_afpod = <fs_afpod>.
Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
Sumit

Which software can i use for recovery management that will allow me to use DVD's instead of Flashdsk

which software can i use for recovery management that will allow me to use DVD's instead of Flashdisk? I find DVD's easier to use. i am using windows 10

As the other posters wrote in order to take a movie file and turn it into a DVD that can be played in standard DVD players you need a DVD authoring application. That you need a separate program to create the DVD is standard procedure and has been that way since the beginning. All Apple produce that can produce video files require an external authoring program. iMovie, iPhoto and Final Cut all do this.
One other thing I will comment on is your choice of output format. You will almost certainly be disappointed with the video quality of your finished DVD if you put a HD video on a SD DVD. Unless you plan to burn a bluray disk you will get a better quality video if you output as SD if you plan to burn to an SD disk.
regards

How to know which Smart-Form is being used for Purchase Order print output

Hi Gurus ,
How to find which Smart-Form and and methods/program being used for Purchase Order print output in SRM ?
In ECC we have tcode NACE where we can check all the details.Is there something similar in SRM ?
Please help.
Regards,
Saurav

There is no similar transaction in SRM for your purpose. Usually if the customers customize the smartforms, they would choose to use their own form by implementing BADI BBP_OUTPUT_CHANGE_SF. Take a look into your system and see if this BADI is implemented. If so, debug it (by pressing "Print Preview" for a PO for example) and find out what form it is using. Or, if the BADI is not implemented, by default, the system uses form BBP_PO.

How much HD's can I use for my Xserve G5 RackMac3,1

How much HD's can I use for my Xserve G5 RackMac3,1 and with ??? TB?
Thanks

Hi
Not quite sure what you mean by "how much?" If you really mean 'how large' then Apple's Support Article might help?
http://support.apple.com/kb/HT1219
Failing that and if you browse this Forum, you'll find some people have had some success with 3rd-Party 1TB (and perhaps larger) SATA drives:
https://discussions.apple.com/thread/2702491?tstart=120
XServe G5 takes up to a maximum of 3 drives. You must use Apple's own Drive Modules. If you want to configure the internal drives as a RAID 5 (minimum of 3 drives required) you will need a compatible RAID Card installed.
Your mileage as ever will vary.
HTH?
Tony

Memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??

What memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??
Max RAM? Vista? Windows 7?

I can't find a dv5-1198de but I did find a dv5-1198er which should be similiar. It states up to 8 gb of ram. HERE
I would try www.Crucial.com for suggested memory ,you can use their Scanner Tool to let it detect what you have and what you can upgrade/replace with.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How many devices can you use for your itunes account?

how many devices can you use for your itunes account?

PT wrote:
Macistotle wrote:
Unless you have DRM still haunting your tunes ... Then you can only use those songs on 5 devices. Otherwise, connect as many as you like (as stated above).
No, you can sync your DRM tracks to an unlimited number of iPods (but only authorized to play on 5 different computers/user accounts)
Patrick
So I can sync two iPods to my iTunes account and sync the same digital copy movies that come with some o' my DVDs to both ipods? Do movies make a difference really, DRM-Wise? Thanks in advance.

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
tt2

What brands and type can I use for my iMac 20" internal Hard Drive?

what brands and type can I use for my iMac 20" aluminium internal Hard Drive?
can I use WD caviar black?
is it too hot?

If you are replacing the drive because the existing one is faulty, that's one thing. If you just want more space, you should take advantage of having a decently fast and relatively small capacity drive in there now (instead of a huge drive). Get an external FireWire drive and off-load most of your user data there. Make your internal drive dedicated to mostly your OS and app files, with plenty of free space. That setup will make your iMac run more efficiently. I won't go into more detail, because I'm not answered your specific question... You can post back with any questions, if interested...
To answer your questions...
You should be able to use any SATA 3.5-inch drive internally, but you should probably keep it at or under 1TB. The main concerns are power usage and heat dissipation. A drive like the WD Caviar Green would be ideal in terms of power and heat, but they do have slower (or variable) spin rate. I have one as an external drive (750GB) and it is amazingly quiet and cool. If I had to replace the internal drive because the current drive failed, I'd put it inside. I'll trade a bit of pure performance for the efficiency (including low noise), and these drives are more advanced with higher data density and larger cache, so the trade-off from slower spin rate may not be so bad.
You can check your current drive's model number (which is shown in System Profiler) to get the specs online. The stock drive in my old +Late 2006+ iMac is a 7200 RPM drive. The Caviar Black is a 7200 RPM drive, with a newer design. So if you want to use a Caviar Black in there, I think it would be OK.

What can I use for a low battery warning on a Mac Book OSX10.8?

What can I use for a low battery warning on a Mac Book OSX10.8?

What you should see above all your windows when your battery gets to low.

There's an error while delivery note creation for STO order

There's an error while delivery note creation for STO order even stock available in unrestricted stock
Edited by: sharma aman on Nov 8, 2011 9:00 AM

Dear Sharma Aman,
Check whether the following link helps you.
Mesaage : while creation of delivery : An item with no delivery quantity .)
Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
In that case , you need not wait for the solution as it is already available.
If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
Try to search in the forum or in google before posting further queries
Thanks & Regards,
Hegal K Charles

What Malicious Software Removal Tool can I use for my Mac Book? I need do to do this for a College class.

What Malicious Software Removal Tool can I use for my Mac Book? I need do to do this for a College class.

You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
https://discussions.apple.com/docs/DOC-2435

Is there a custom function available which can be used for logging errors captured in a sp in a sql table

Is there a custom function available which can be used for logging errors captured in a sp during and after execution in a sql table?
Basically we would like to utilize such function in every sp and log errors of each sp in a error log table
Mudassar

Thanks .
I was able to write this however I am thinking I am missing something
CREATE FUNCTION testfunction1()
RETURNS @temp_error TABLE (
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
AS
BEGIN
insert @temp_error(procedure_name,line_number,error_number,error_message,error_state,error_severity)
select error_procedure(),error_line(),error_number(),error_message(),error_state(),error_severity()
RETURN;
END;
CREATE TYPE test_type AS TABLE(
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
GO
create proc usp_error_test
@test_type AS test_type READONLY
as
begin
begin try
select 1/0
end try
begin catch
select * from testfunction1(@test_type)
end catch
end
Mudassar

Whether PXI can be used for Event data logging in an electrical Substation ?

Whether the NI PXI system can be used for recording digital event data with 1 ms accuracy ?Whether its DI boards support onboard timestamping ? Whether PXI can be synchronized with time pulses from a GPS receiver ?

Yes indeed, there is a digital event recorder example in developer zone, search for "digital time interval" on NI developer zone, or follow this link: http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3DCA356A4E034080020E74861&p_node=DZ52336&p_submitted=N&p_rank=&p_answer=&p_source=External
In addition, we have done additional work to create a template for the LabVIEW FPGA, http://sine.ni.com/apps/we/nioc.vp?cid=11829〈=US
which has 96 digital I/O lines as well as 8 analog in. With the NI-7831R you are able to combine analog and digital events in the electrical substation.
Further, using PXI, we can synchronize with a GPS time stamp such as IRIG-B, and perform these functions all in a headless - real-time OS LabVIEW.
I woul
d be happy to discuss your application in more detail and offer a complete solution, or a recipe to create the solution yourself.
Thanks for the question,
Preston Johnson
Business Development Manager - Industrial Applications
National Instruments
512-683-5444
[email protected]
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

Variant config can be used for STO orders

Similar Messages

Maybe you are looking for