Variant Configuration Issue - Urgent

Hi PP Gurus,
Can you help me for the following issue:
I have a material variant (with 60% std items) and the remaining 40% of items , I want to add at the time of sales order creation.
But it is not allowing me to add , since it is showing in display mode.
Please guide me to sort out this isssue.
Regards
Chandru

Hi,
I have a material Variant , in this 60% of items are common to all the products and 40% of the items will confimed at the time sale order creation.
This 40% material will varie from customer to customer. so these itmes are should be selectable in sales order.
Then only I can choose the requirement based on the customer.
But, for material variant it's showing in Dispaly mode.
How avoid these.
Regards
Chandru

Similar Messages

Variant Configuration Issue

Hi
I want to pass one characteristic value description into other characteristic text value, which i am controlling with procedure dependency.
Currentely i can able to pass Chars value into other text chars with same value.
For examples
Char X    01 - Description A
             02 - Description B
             03 - Description C
Char Y : ( text free form field )
If i select Char A 01 in configuration then through dependency syntax I can able to pass '01' into char Y, but i want to pass A Description in place of char' value.
Please let me know how it is possible.
Vicky

Hi
I am facing issue in Variant Configuration functionality.
I am having 1 characteristic XYZ with values
1 - data
2- cable
3 - wire
Another characteristic is ABC with no value, it is text field.
Now in configuration of material if i select XYZ = 1 (data) then through procedure depedency i am passing a value 1 (same like XYZ). But i want to pass decription of characteristics value in char's ABC
means if i select XYZ = 1 then in char's ABC = Data should come instead of '1'.
Regards
Vicky

SAML configuration issue-Urgent Help required!!!

I have configured SAML using the following article guidelines http://www.oracle.com/technology/pub/articles/dev2arch/2006/12/sso-with-saml.html
but I 'm unable to login to Application A itself which is SAML source site.Please Help me to understand where am i going wrong!!!!!

Hi George,
The issue is I wanted to download few app from google play on Cisco DX 650 example office suite whic helps to open an attachment like word pdf etc on the phone.In order to do that we require a google play store app on the phone which I am able to see on few phones and on few phones it is missing.
I have checked the CUCM config for all the phone and I can see allow application from android market is enabled.
still I am not able to see the play store Icon
Rgds,
Ajith

Issue in Variant Configuration

Hi all,
I am working on Variant Configuration and i have a Configurable Material with Super BOM Structure.
Separate Configuration Profiles are maintained for both Main Material and BOM Component.
Configuration Process is Sales Order (SET), BOM Explosion is at Multilevel and Application is SD01.
When i create a Sales Order, only BOM's of Main Material are getting Exploded, where as BOM of Components
are not been Exploded. When i am trying to create a Sales Order directly for Configurable Component,
then BOM gets Exploded.But this does not happen when i try for Main Material.
Can any one help me in this regard?
I want to know the reason for this and any further Customization settings, to make Components of Main Material
as well as BOM Material get Exploded in Sales Order.
Thanks in Advance.
Regards,
Ravi

Hi ,
The issue could be due to the following.
When to enter the Main material in the sales order. The Main Material Item Category will be "TAC" for which "Structure of scope" in IMG would have maintained hence it will explode BOM components. Now eventhougth BOM components have " Configuration profile" The item category is "TAE" which will not " Scope of Structure".
Now goto IMG item category configuration and maintain " Bill of Material/ cobnfiguration" settings for TAE. it will explode multi level BOM.
But when u enter the configurable BOM separately in sales order it will explode, because now BOM componet Item cat will be TAC
Hope this will help u
regards
Arun Prasad
Edited by: arun prasad on Jul 30, 2009 6:27 AM

Variant Configuration - Pricing issue

Hi,
Can anybody please help me out with the pricing issue which I am facing?
How can I increase the price by a certain percentage based on the value of another pricing condition VA00 and show it as a different pricing condition?
For example: VA00 for my product price shows 1000. Now on 1000, I want to calculate 30% and show it with a different pricing condition description such as "Surcharge". I cannot used a fixed price for lets say "Surcharge" because 1000 as product price is not fixed/static and will depend upon variant configuration and the "Surcharge" will also vary with it.
How can I please implement such a solution?
With best regards,
Sunil

Use the VA01 condition type for this. This is the standard condition type provided by SAP to address this issue. In your pricing procedure against VA01 give the From To as VA00.
Hope this helps.
Regards,
GSL.

Sales Order text for Variant Configuration

Hello
I have researched my issue and also have asked other peers for guidance. I feel that I am really close to getting my issue to work but I am not sure what I am missing, so I am hoping that someone can give me some advice as to what to check please. See below for the description.
My issue is in reference to SD Variant Configuration and is outlined below.
Overview
Main Unit is a radio test set
Test set can have an upgraded software
Example
Model 6015 u2013 standard test set
Model 6015T u2013 Upgraded software test set
Model 6015V u2013 Upgraded Software + test Set
Requirement
Use same Material Number using Variant Configuration for the upgrades
Price is to default to the Upgraded price
NOTE:
Our materials are already established and are set up as material type Finished Goods; ERLA item category; sales order item category is a copy of TAC. I am using a Configurable Material type KMAT, item category 0002 and linking to the FG material item category ERLA in the material master.
I have created the Material Variant (KMAT) in MM01
Created the characteristic in CT04
Created Classification in MM02 for material FG
Created Super BOM for Configurable Material in CS01 and added the upgrades as Alt Bom 2 for upgrade and 3 for Upgrade+. Also added the Alt BOM text
Created Profile of configurable material in CU41
For the Material I added the configurable material to MRP 3 screen in MM02
Created the BOM link in CS40
I simulate the material in CU50. I enter my material; select the icon for configuration, I can see the characteristic Value Assignment nad see my characteristics Description. I go to the value and use the drop down I then see the pop up of all the different values.
I have created Characteristic Reference VCSD_UPDATE_ARKTX with table VCSD_UPDATE and field ARKTX - no values
I have created a characteristic Test_Choice with the 2 values one is Test Upgrade 1 and the other is Test Upgrade 2. Both of these have the description as well.
For Material Text:
I have set up a reference characteristic using 30 character format (named VCSD_UPDATE_ARKTX),
with table name VCSD_UPDATE and field name ARKTX.
Then in the Configuration Profile(CU42) for configurable material, added a procedure(named PR_PRODUCT_DESCRIPTION) to the dependencies which contains code that sets the description
$self.VCSD_UPDATE_ARKTX = ''Test Upgrade 1u201D
If $self.TEST_CHOICE = Test_Upgrade_1,
$self.VCSD_UPDATE_ARKTX = ''Test Upgrade 2u201D
If $self.TEST_CHOICE = Test_Upgrade_2,
When Entering the sales order for Material Number XXXXXX, I receive a pop up that I can select which Alternate BOM (from CS02) I would like. I select my line item and then select the configuration icon at the bottom of the sales order. I see again my characterestics values (the same as CU50) but am unable to select the radio button. Not sure if this part is standard. Still no change in the sales order line item. I have validated that I am using a copy of the standard TAC item category. How does the text change to the correct value? Am I missing a seeting somewhere. Please provide any guidance with this as I have been trying to get this to work for over a month.
Thank you for your time. It is greatly appreciated.

I have figured out that this will work if I go to the standard material (it is not KMAT but it is a FERT material type) and set the flag in the Material Master Basic Data 2 tab that this is a configurable material and not use KMAT material type for a super BOM. The text changes for this scenario so it give me hope.
This is not ideal, as I want to use the Super BOM because there are different variations (non stock items) that I need to pull through on the picking list in order to tell the end user which option needs to be loaded in the standard material. At least I know the text can change on the sales order; but I am still struggling with the use of the super BOM and changing the sales text when there is use of a super bom as you tie that to the MRP 3 screen of the FERT material type. I can set everything up, but the text will not change if I set up the material master this way. Guidance is appreciated.
Example
Material 72433 (FERT)
on sales order I enter 72433, my alternate BOM comes up with different Options. Alternate BOM 1 is standard configuration; My Alternate BOM 2 has Option 3 and 4 while alternate BOM 3 has option 5 and 6. Alternate BOM 2 is a 6015T and Alternate BOM 3 is a 6015V.
I want my sales order to pull through the text of 6015T or 6015V, whichever is chosen. I want my picklist to print out the option that was selected.

Consuming Material Having Variant Configuration

HI
We are using Variant Configuration for our semi finished product and its
batch managed.There are two plants in one plant say A and B. In A plant
we are using Variant configuration.The same material is stock transferred
to plant B and is further processed.
We are creating CIR in plant B. After taking MRP run we are converting
planned order to purchase requisition and subsequently Stock transfer
purchase order on Plant A. When the material is produced in plant A,it is
transferred to plant B on stock transfer order mentioned above. But the
material is against CIR in plant B. We remove the material from CIR
through 411E movement and system keep it as free stock in unrestricted.
Now when i am consuming this material for further processing in
production order of Material getting manufactured system is asking me for
Variant Characteristics.
System should not ask me variant characteristics once it has been removed
from CIR i.e. special stock.
Any Work around avilable.
Regards,
Anand.

Hi Anand,
Finally, I could understand your issue from your CSS message.
In your description, AA is configurable material in both plant A and plant B, BB is not a configurable material in plant B, AA is a component of material BB, so when you produce BB, there will be dependent requirement generated for AA from BB, now you want to use the stock of AA to fullfill the dependent requirement, however, the system will require you to enter the characteristic at that time.
Then where is the stock of AA comes from? I have mentioned this in my previous reply. But as I have mentioned it is not correct to have unristricted stock for the configurable material, therefore, your process to have free stock of AA is not correct.
Another point is that, your process to have configurable material as a component of a non-configurable material is also not proper.
For example, material BB is a Car, material AA is the Door of the Car, your Car is not configurable, but the Door is configurable, you may have green door and red door according to the configuration, but as your car is a firmed material then what's the meaning to have different door, if you want to have different door, then that means you also need to have different color of the car, like green door for green car, red door for red car, then that means your car should be also a configurable material to make you can select the color of the car too.
Or if your Car is a firmed material as green car, then do you think there is any meaning to configure the door of the car? Unless you do want a red door for a green car, but this can also be realized with a configurable car.
So normally, like your situation, you should use multi-level configuration structure to do the production in make to order scenario.
Therefore, still the problem has been described in my previous reply, no matter how you get the stock of AA, the AA is produced with the configured configuration module, so the stock of AA is also with the configuration data, then no matter how you want to consume the stock of AA, system will always ask for the characteristic of the requirement to compare it with the stock configuration to see if they are same.
For example, you are producing your Car, but as far as I can see you should have no place to configure the door in production order, therefore when you try to consume the door, the system will of course need to know which color you want, because if you want red door but there is only stock of green door, then how the system should do in your opinion?
Then finially, the best way of solving your issue is to have material variant for the configurable material, like the door, you may have material variant as green door and red door, if your firmed Car is green car, then you can use green door as the firmed component, if your firmed Car is red car, then you can use red door as the firmed component, also when you do the production, you could simply produce the green door directly without configure the door, because the material variant is a stockable item but the configurable material is not, then your scenario would be very simple and there will no such problem any more.
If you do still want to keep your scenario, but don't want the system requires you enter the charateristics, then you may have to do the modification of the goods movement transaction to disable that, but it may lead to the inconsistency situation, like actually you want red door, but what you have in stock is green door, without that, you may consume the green door stock for the red door requirement, then it will mess up all the following process.
Also as you are doing the goods movement in MM transaction, so if there is user-exit could be used to change this behavior is decided by MM function, however, base on my checking there will be no such user-exit to control this behavior at MM side, because the consequnce is really dangerous for the system operation.
Therefore, I think the best way for you is still adjust your production scenario to make your production standard, then SAP system will accept that standard production scenario under your requirement.
Thanks and regards,
Rachel
Edited by: Rachel Tang on Apr 2, 2010 10:25 AM
Edited by: Rachel Tang on Apr 2, 2010 10:32 AM

Copy control settings for Multilevel variant configuration

Dear All,
I have the following scenario for variant configuration A quotation is created for configurable material with multilevel configurable material
with reference to this quoatation a sales order is created.
My requirement is that the quoatation must get copied to sales order as it is along with the values for subitems also.
In copy control settings there is a field at item level called
configuration :
In this if I maintain value
A: The variant is getting copied but the values for subitems is not getting copied the values for main material is in changable mode.
B: The variant is getting copied but the values for subitems is not getting copied the values for main material are not in changable mode.
C:The variant is getting copied   the values for subitems is getting copied the values for main material are in changable mode but the values for subitems are not in changable mode.
My requiremnt is that
The variant must get copied
the values for subitems must get copied
the main material vlaues must be in changable mode
the subitems vlaues must be in changable mode
How can I fullfill this requiremnt, has any one of you come across this scenario, Pleae provide with solution it is urgent
Informative answers will be provided maximum points.
Deepak

Hai Deepak Mehmi,
please check in T CODE VTAA
In the position check
SalesDocType : Sales order type
SalesDocType : Inquiry type
Double clcik and check
DataT 051 General header data       Copying requirements 002 Header-diff.customer
DataT 101 Header business data
DataT 001 Partner header
And Tick mark for Copy Item Number
For further check:
In Item
                                  Copying requirements 301
DataT 151 General item data                                          Pos./neg. quantity   +
                                                           Copy quantity
DataT 102 Bus.data/item compl.                                     Pricing type         G
DataT 002 Partner item                       2 Update document flow   Cont. item copy mode
                                                    Copy product select.
FPLA 251 Conditions                Configuration
                                                           Campaign Deter.
Regards,
Mani

SD Variant Configuration with manual entry cut length variant

Hi Expert,
I have one scenario in variant configuration where client want to put one variant value manually and according to entry price variant for example 4 M cut length should pick up automatically in variant pricing.
Please check below example.
X-Material
I have created variant one Cut length and once Coated colour.
Character Cut length with no value as customer want put manually like 4 M ,4.2 M .......etc as per requirement.
Character Powder coated with different colour value like red,blue,pink etc......
Character Price with SDCOM table
Condition class ZClass with above character....
Dependencies ZPrice with above character combination
CU50 characteristic value assignment.
I have maintain condition record for VA00 with all character value....
Now I m creating sales order with X-Material where I will get option for variant for cut legth enter manual...4 Meter
and powder coated with colour option ,here I m getting price for colour which is coming from condition record...but not getting for cut length which we have enter manually...
One more thing sales qty sales in pieces and pricing should be in meter...so when I will sales X-material in pieces then pricing should be in meter.
Please suggest as this is urgent requirement...
Thanks in advance

I m surprise no one has given any suggestion...
anyway closing this thread..
Thanks
Edited by: KHAPREVIPIN on Feb 22, 2012 2:55 AM

How to Create Sales Order using BAPI with Variant configurations

Hi All,
I need to create a sales order using BAPI BAPI_SALESORDER_CREATEFROMDAT2 with Varaint confiugartions. I will get Header ITEM and variant configuration items in the flat file. Kindly help me in this regard.
One more thing, is there any way to findout all the Varaint classifications for a particular Material?
I have done the below coding. Sales order is getting created but variant configurations are not populating.
*...Configuration: Reference Data
DATA: gt_order_cfgs_ref TYPE TABLE OF bapicucfg,
      wa_order_cfgs_ref TYPE bapicucfg.
*...Configuration: Instances
DATA: gt_order_cfgs_inst TYPE TABLE OF bapicuins,
      wa_order_cfgs_inst TYPE bapicuins.
*...Configuration: Part-of Specifications
DATA: gt_order_cfgs_part_of TYPE TABLE OF bapicuprt,
      wa_order_cfgs_part_of TYPE bapicuprt     .
*...Configuration: Characteristic Values
DATA: gt_order_cfgs_value TYPE TABLE OF bapicuval,
      wa_order_cfgs_value TYPE bapicuval.
*...Configuration: BLOB Internal Data (SCE)
DATA: gt_order_cfgs_blob TYPE TABLE OF bapicublb ,
      wa_order_cfgs_blob TYPE bapicublb.
*...Configuration: Variant Condition Key
DATA: gt_order_cfgs_vk TYPE TABLE OF bapicuvk,
      wa_order_cfgs_vk TYPE bapicuvk.
*...Configuration: Reference Item / Instance
DATA: gt_order_cfgs_refinst TYPE TABLE OF bapicuref,
      wa_order_cfgs_refinst TYPE bapicuref.
*...Configuration: Reference Data
wa_order_cfgs_ref-posex = '10'.
wa_order_cfgs_ref-config_id = '1'.
wa_order_cfgs_ref-root_id = '1'.
wa_order_cfgs_ref-SCE = '1'.
wa_order_cfgs_ref-CBASE_ID_TYPE = 'G'.
wa_order_cfgs_ref-CONSISTENT = 'T'.
wa_order_cfgs_ref-COMPLETE = 'T'.
APPEND wa_order_cfgs_ref TO gt_order_cfgs_ref.
*..2nd item
wa_order_cfgs_ref-posex = '20'.
wa_order_cfgs_ref-config_id = '2'.
wa_order_cfgs_ref-root_id = '1'.
wa_order_cfgs_ref-SCE = '1'.
wa_order_cfgs_ref-CBASE_ID_TYPE = 'G'.
wa_order_cfgs_ref-CONSISTENT = 'T'.
wa_order_cfgs_ref-COMPLETE = 'T'.
APPEND wa_order_cfgs_ref TO gt_order_cfgs_ref.
*...Configuration: Instances
wa_order_cfgs_inst-config_id = '1'.
wa_order_cfgs_inst-inst_id = '1'.
wa_order_cfgs_inst-obj_type = 'MARA'.
wa_order_cfgs_inst-class_type = '300'.
wa_order_cfgs_inst-obj_key = '2021B'.
wa_order_cfgs_inst-quantity = 1.
wa_order_cfgs_inst-PERSIST_ID_TYPE = 'G'.
wa_order_cfgs_inst-CONSISTENT = 'T'.
wa_order_cfgs_inst-COMPLETE = 'T'.
APPEND wa_order_cfgs_inst TO gt_order_cfgs_inst.
*..2nd item
wa_order_cfgs_inst-config_id = '2'.
wa_order_cfgs_inst-inst_id = '1'.
wa_order_cfgs_inst-obj_type = 'MARA'.
wa_order_cfgs_inst-class_type = '300'.
wa_order_cfgs_inst-obj_key = '2021B'.
wa_order_cfgs_inst-quantity = 1.
wa_order_cfgs_inst-PERSIST_ID_TYPE = 'G'.
wa_order_cfgs_inst-CONSISTENT = 'T'.
wa_order_cfgs_inst-COMPLETE = 'T'.
APPEND wa_order_cfgs_inst TO gt_order_cfgs_inst.
*...Configuration: Characteristic Values
wa_order_cfgs_value-config_id = '1'.
wa_order_cfgs_value-inst_id = '1'.
wa_order_cfgs_value-charc = 'BASIC_MACHINE'.
wa_order_cfgs_value-value = 'L28'.
wa_order_cfgs_value-VALCODE = '1'.
APPEND wa_order_cfgs_value TO gt_order_cfgs_value.
wa_order_cfgs_value-config_id = '1'.
wa_order_cfgs_value-inst_id = '1'.
wa_order_cfgs_value-charc = 'BUCKET'.
wa_order_cfgs_value-value = 'PL1001'.
wa_order_cfgs_value-VALCODE = '1'.
APPEND wa_order_cfgs_value TO gt_order_cfgs_value.
*..2nd item
wa_order_cfgs_value-config_id = '2'.
wa_order_cfgs_value-inst_id = '1'.
wa_order_cfgs_value-charc = 'BUCKET_FOC'.
wa_order_cfgs_value-value = '023OP0049'.
wa_order_cfgs_value-VALCODE = '1'.
APPEND wa_order_cfgs_value TO gt_order_cfgs_value.
wa_order_cfgs_value-config_id = '2'.
wa_order_cfgs_value-inst_id = '1'.
wa_order_cfgs_value-charc = 'BUCKET_HOE'.
wa_order_cfgs_value-value = '028MS0004'.
wa_order_cfgs_value-VALCODE = '1'.
APPEND wa_order_cfgs_value TO gt_order_cfgs_value.
wa_order_cfgs_value-config_id = '2'.
wa_order_cfgs_value-inst_id = '1'.
wa_order_cfgs_value-charc = 'TYRE_PRESSURE_GAUGE'.
wa_order_cfgs_value-value = '81004402'.
APPEND wa_order_cfgs_value TO gt_order_cfgs_value.
*...Configuration: Reference Item / Instance
wa_order_cfgs_refinst-posex = '10'.
wa_order_cfgs_refinst-config_id = '1'.
wa_order_cfgs_refinst-inst_id = '1'.
APPEND wa_order_cfgs_refinst TO gt_order_cfgs_refinst.
*..2nd item
wa_order_cfgs_refinst-posex = '20'.
wa_order_cfgs_refinst-config_id = '2'.
wa_order_cfgs_refinst-inst_id = '1'.
APPEND wa_order_cfgs_refinst TO gt_order_cfgs_refinst.
Regards,
Rajesh

Hi all,
Please help me in solving the issue.
Rajesh

Custom ATP Check using Variant Configuration Data in sales order

I have a requirement to modify the standard SAP ATP check by including the variant configuration data entered on a item. Standard SAP does not use/include the characteristics data when doing the ATP. None of the available user exits would allow me to do this.
The scenario is the client has a configurable product that exist in inventory as one item, base unit as IN2. The batches that exist in inventory have the characteristics of width and length. The order data specifies a width and a length, they need the ATP to identify the availability based on the characteristics of the batch.
The solution was to present the user with a list of batches based on the characteristics that meet the criteria. The user would then have the option of choosing one of the batches which would mean that the line item would include the batch #. If the user does not want any of the batches, they could choose to select a Make to Order option, which would change the item category of the item, so that it creates a production order upon saving the order.
The problem I am having implementing this solution is I have not been able to identify the internal table(s) that contains the characteristics data in SAPMV45A after the configuration screen is called. If anyone knows where that information is during the sales order processing, it would be greatly appreciated.

Hello Jean,
Have you managed to find a solution as yet? I know you have not received any replies but am hoping you were able to resolve the problem as we are facing the exact issue on our project.
Please let me know,
Thanks,
Tanya

Populating Variant COnfiguration value in ORDERS05

Hi,
I'm going to create Sales Order using ORDERS05 IDoc Type.Data coming from Non-SAP system consists of Variant Configuration data.I mean those data we have to place at the Item Level variant configuration area.Can anybody please tell me which segment I've to populate for the same? or if there is no segment for that then how we can achieve this........Is there any exit for the same?
Thanks in advance,
Sarbajit

Hi Sarbajit,
There is a segment need to fill the structures XE1CUREF or XE1CUCFG (IDOC).For this pass characteristic name and it is values.In va01 if you seen it will pass description and it is value.I did this before and created order and quotation.
ORDER_CFGS_REG
    POSEX              000010
     CONFIG_ID          000001
    ROOT_ID            000001
ORDER_CFGS_INST
    CONFIG              000001
    INST_ID            000001
    OBJ_TYPE            MARA
    CLASS              300
    OBJ_KEY             CONFIG-MATERIAL
CONFIG_ID          000001
     INST_ID            000001
    CHARC              'TURRET'
    VALUE              1.
pass in this way to three structures.These are mandatory to fill if you have any issues please post.
Regards,
Madhu.

ALE Variant Configuration

Hi , I am not having much idea about ALE , I am some problems in it.
When running the ALE to move the Variant Configurator from Client 130 to other Clients, I am running into the following issues.
1)it does not copy the dependencies within the Configuration Profile. It copies the dependencies themselves and the profile, but when you go into the profile, there are no dependencies listed. An example is: For SLCase in Client 130, go into the profile and you can see several dependencies there, but when you go into Client 110.
2)it does not always update the dependency when it already exists.
3)it does not update the Table structure when the table already exists.
4)it does not update the data in the table when the table already exists (this oculd be because the structure of the table changed in Client 130, but didn't update the structure in the other clients (as in #3 above).
5)it does not update the Default checkbox on the characteristic when the characteristic already exits.
Thanks.
Ankesh Jindal

Hi
Check SAP note 10745. It has details how to transfer classification data from one client o another by ALE. Hope it will help to solve your problem
Regards
Antony

Take back the exploded material Items from variant configuration

Hi All,
Can any one of you please tell me how to get back the exploded material Items from variant configuration? I was looking for a function module which takes me to CU50 and once user finishes the configuration process. I would like to take back all the exploded Items to my application.
Thank you in advance...
Regards,
Santosh

Hi,
Create SPK at plant 1000 with below settings,
Plant =1000
Spy type= 70
Proc type= E
Special proc type= E
Activate " withdrawl .alter.plat" check box
Issuing plant = 2000
Assign the Same SPK for component in plant 1000 at MRP view not for Header material.
And Run the MRP for Header material at plant 1000 and check ths requirement would have creatd for Component at plant 2000 .
I hope this will solve your problem.
Pradeep

Variant Configuration and pricing in a Sales Order

Hi,
I have been successful in updating variant configuration for a sales order using the function modules 'BAPI_SALESORDER_CREATEFROMDAT2' to create the sales order and 'BAPI_SALESORDER_CHANGE' to add the variant configuration characteristics on a configurable material.
The issue I am having is that if I don't add the configuration values for pricing the pricing will not automatically update.
I have tried using function module 'CE_C_PROCESSING' to update the pricing after calling BAPI_SALESORDER_CHANGE without success.
Is there anyway to get the pricing to automatically update without adding the variant configuration values related to pricing?
Any help would be appreciated.
Derick

Hi Derick,
We are trying to create a sales order with a configurable item using 'BAPI_SALESORDER_CREATEFROMDAT2' and the issue that we are facing is we are getting the sales order but the configuration values are not getting populated.
Could you please guide us on how to pass the configuration data to the BAPI to create a sales order with configuration values?
Any help would be highly appreciated.
Thanks...
Abeehs

Variant Configuration Issue - Urgent

Similar Messages

Maybe you are looking for