Variant Configuration - Planning tables disappearing from planning profiles

Hi everyone,
I'm having a strange problem with some planning profiles I've set up in MDPH for several of our configurable products. I'm getting reports from our production planners that certain planning tables within these profiles are suddenly disappearing from the profiles, along with all the values they've input for those characteristics. This is apparently happening without anyone making any changes to the profiles.
By way of background, I've recently created several new variant models (including planning profiles) for a new series of products, several of which share characteristics with the variants that are experiencing the problem I described. Is it possible that this might somehow be impacting the planning profiles of the old variants?
Any help is greatly appreciated. We're running 4.6c, FYI.
Thanks,
- Greg

Hello Anil,
Thank you very much for your reply. I've read both notes you referenced and they seemed very promising in that the symptoms described match what we are seeing. Unfortunately, however, they don't seem to reflect the root cause of the problem I'm seeing. Our users are logging in in English, and we have English names for the characteristics in question. Also, we are on a later patch version (55) than the one that fixed this issue (51). So I don't think this one will help us to fix the issue.
If you have any other ideas, please let me know. Thank you again for your help on this!
Regards,
- Greg

Similar Messages

  • I lost my iPhone recently. It has since disappeared from support profile. Does this suggest that the phone has been restored and synced with another account?

    I lost my iPhone recently. It has since disappeared from support profile. Does this suggest that the phone has been restored and synced with another account?

    See:
    What to do if your Apple ID has been hacked
    (Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

  • User tables disappeared from our Planning SQL table

    All of the user tables in the SQL database associated with our Planning application mysteriously disappeared.
    We created a classic Planning application and converted it to an EPMA application. We deployed the application in our test environment and then used Lifecycle Management to migrate it to production. Everything was functioning well until we started getting errors saying "Creating rebind thread to RMI
    Query Failed: SQL_GET_SYSTEMCFG: null
    java.sql.SQLSyntaxErrorException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Invalid object name 'HSP_SYSTEMCFG'."
    We checked the tables in our production Planning relational database and all of the HSP* tables were gone. The HSP_SYSTEMCFG table disappeared sometime before 11/14/12 and the remaining tables disappeared between 11/14 and 11/16. The tables went missing in both our test and production environments, but I'm not sure of the timing for the test database. Our SQL DBA couldn't find any unusual activity in the SQL logs. We are trying to determine the cause and have not had any luck so far. Has anyone else experienced this problem?
    We have restored the tables from a database backup but are concerned that the problem could occur again.

    Are you serious? This is EXACTLY the same isue that ypou had ORACLE USER_TABLES Table names in CAPITALS.

  • Variant Configuration Planning Strategy

    Hello All,
    We are using Variant configuration and we want to maintain independent requirements for the dependent materials. The main material will be make to order and we want the dependent requirements from the main material to reduce the independent requirements maintained for the dependent materials. Please let what planning stratagies should i use for the main material and dependent materials. Due points will be awarded.

    I don't know if R/3 supports full fledged planning based on characteristics but I do know characteristics based planning can be done in APO. The following documents talks a little bit about planing characteristics in the end in R/3, you may want to take a look at it.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903bb9b8-f15b-2910-8381-ab05bdcac2c1?QuickLink=index&overridelayout=true

  • Apple Care (and registration) disappeared from Apple Profile

    Seems like Apple is really going down after Steve Jobs departure.
    Been having a lot of issues, this is just one of them.  First, my registered products disappeared from my product list.  When I had to register them again, it says that I am not covered by Apple Care, which I purchased with my laptop.  Now I can't get in touch with Apple for my other problems.
    This is really getting frustrating.  My next product will not be an Apple.

    If it's just a glitch it can be sorted out.  Call up AppleCare, and tell the Advisor that you did have APP registered, but that it got stripped off somehow.
    If you still have the reg #, or the receipt, etc, then they can transfer you over to the Agreement Administration, and get it sorted out for you.

  • Query results varying with unused table in from clause

    Hi all,
    I have table (processing_table2) specified in the FROM clause of SQL query but I havent used any of its value in the SQL statement but it still affects the results of the query. Please help me here as i am clueless.
    Below is the query provided
    SELECT SUM((CREV.sadc_extd*CSSP.redit_pcnt)/100)
    FROM revenue_lines crev,
    sales_split cssp,
    processing_table2
    WHERE crev.order_num='7631090072'
    Results of the above query : 344028065018.359
    SELECT
    SUM((CREV.sadc_extd*CSSP.redit_pcnt)/100)
    FROM revenue_lines crev,
    sales_split cssp
    WHERE crev.order_num='7631090072'
    Results of the above query :26463697309.1046
    Some one suggest me here pls !!!!

    924804 wrote:
    Hi all,
    I have table (processing_table2) specified in the FROM clause of SQL query but I havent used any of its value in the SQL statement but it still affects the results of the query. Please help me here as i am clueless.
    Below is the query provided
    SELECT SUM((CREV.sadc_extd*CSSP.redit_pcnt)/100)
    FROM revenue_lines crev,
    sales_split cssp,
    processing_table2
    WHERE crev.order_num='7631090072'
    Results of the above query : 344028065018.359
    SELECT
    SUM((CREV.sadc_extd*CSSP.redit_pcnt)/100)
    FROM revenue_lines crev,
    sales_split cssp
    WHERE crev.order_num='7631090072'
    Results of the above query :26463697309.1046
    Some one suggest me here pls !!!!CARTESIAN PRODUCT changes result set

  • Variant Configuration tables

    Hi,
    I need all Variant Configuration related Tables.
    Can you give me list of it or link for the same.

    Hi Chetan,
    Find below the tables related to Variant Configuration
    1.1     Characteristics:     
                         CABN                    Characteristics ( o.a. batch/vendor)     
         CABNT                    Characteristics description
         CAWN                    Characteristics  ( o.a. material)
         CAWNT                                    Characteristics description
         AUSP                    Characteristic Values
    1.2     Class types and objects :            
                         TCLAO                                                          Several class types for object
         TCLA                    Class types ( vb. lfa1 => v10 en 010)
         TCLAT                    Class type text
         TCLT                    Classifiable objects
         TCLC                    Classification status
    1.3     Links:     
                         INOB                    Link between Internal Number and Object
         KLAH                     Class header data  
         KSSK                    Allocation Table: Object (vb.matnr) to Class 
         KSML                    Characteristics for a class (internal number)
    With best regards
    Shankarling.

  • Entire table disappeared in Numbers checkbook - HELP!

    I set up a simple checkbook for my 75-year-old (more or less computer illiterate) wife to use in managing an internal account.  She's spent hours transferring handwritten ledger entries into it.  All seemed to be working well.  Shortly ago, she attempted to add a new row to the checkbook table (Enter with cursor in last cell).  For some unknown reason the resulting "default" balance (as no entry had yet been made in the new row) instead of being identical to that of the previous row was double that amount.  When she attempted to remove the newly-created row (she may have pressed Cmd-Delete) the entire table disappeared from the screen (without warning or any "Are you sure?").  Next wrong move — she closed the document and almost certainly told it save changes.  Not surprisingly, when I open the document I get the same thing:  The only thing showing is the title of the document and the "Account Categories" table (with no values showing; if I click the red arrow I get an "invalid reference" message.
    So far so bad.  Worse yet, it seems that CC Cloner failed to back up the document last night — so the only existing backup is of the first few lines of entry.
    HOWEVER:  The document DOES have quite a lot of data in it (or so it would seem).  If it is force-opened (All Files) in either Excel or Text Wrangler it comes up with many screens of gibberish.
    I hope someone knows some magic trick for getting that table back — otherwise, one of us is going to have to re-enter about 75 lines of transactions.

    Fr. Gregory Williams wrote:
    Sounds like a very good idea — though I suppose I'll have to go to the folder periodically & delete the old saved versions manually (correct?).  I can't quite imagine why the iWork programs don't have a timed auto-save feature (even Word 5.1 had that!).
    Gregory,
    Apple OS X does have that now, as of Lion. Mountain Lion further enhanced and tuned the autosave/versions features.
    If your computer is too old to run Lion, there may be third party apps to do it, if they haven't all been updated.
    Jerry

  • Firewire 400 gone from System Profiler

    Hi everyone.
    I've just come across a problem with my Dual 2Ghz G5. It appears that the 400 firewire bus has stopped working both back and front and it has also disappeared from System Profiler. The listing under firewire in SP still shows 'up to 800Mb/sec' for the 800 bus but I'm sure there used to be a separate listing for the 400 bus which is no longer there. Am I mistaken ?
    I was trying to connect a G4 Sawtooth through firewire to update some photographic files I recently discovered had become corrupted when restoring from Time Machine a while back. ( Another subject but TM seems to have caused a lot of niggling problems after the restore - I think I'm gonna revert to Super Duper again ).
    Anyway, with the G4 in FWmode I cannot get either of the FW400 ports on the G5 to recognise it. I can't test it on the FW800 port as the G4 doesn't have one... ( that works - see old post .)
    Can they both burn out simultaneously ?
    Geographically they are quite a distance apart, are they both serviced by the same PCB or something like that ?
    Is it a software thing ? ( the 800 still shows up )
    All wisdom greatly appreciated,
    Cheers, L2K8

    Hi DaddyPaycheck.
    Well that has to be the fastest response ever. Thanks.
    I unplugged the machine, as per instructions, and left it for an hour or so while I went to the supermarket.
    I also borrowed a friends laptop to test the FW ports. The system profiler says the same as before incidentally.
    Good news, the G5 picks up the laptop in FWmode so the ports on the G5 are working. Here's the weird bit though. The laptop will pick up the G4 in FWmode and the G4 will pick up the laptop in FWmode in the other direction so the ports on the G4 are working in both directions. However, it takes several attempts to eject the FWmode drive from the desktop of the laptop and I have to force it through Disk Utility.
    Meanwhile, the G4 and the G5 will still not recognise each other.
    This is beginning to sound similar to the unresolved problem I had a few months back involving a PCI FW 800/400 card. I'm going to go back and check the earlier posts and try the whole combination thing with the PCI cards removed.
    Cheers,
    L2K8

  • Variant Configuration - Conf. Supporting Points - Planning Profiles

    Iu2019m currently working on an implementation where we are implementing R/3 (SD, Manufacturing, LO, FI, etc) and APO Demand Planning.  In doing so weu2019re using VC (Variant Configured) Products where weu2019re forecasting at the KMAT Level which should drive the dependent requirements for non-VC items and those VC items that we maintain a Planning Profile (MDP6) and then Conf. Supporting Points for the items.  This is fine for the products that we actually want to maintain a split factor for but most of the VC items we have from a planning perspective we donu2019t actually want/need to maintain a probability usage for the VC items.  In trying to maintain the Planned Independent Requirements we receive error messages stating we need to maintain the profile and also manage supporting points. 
    I was able to release a forecast from DP and place it in Demand Management R/3 but if you want to change it in R/3 youu2019re forced to maintain the profile and supporting points.  Also, even using the released forecast from DP when I run MRP I get en error message 52 u201CNo BOM Selectedu201D and then opening the order that is generated I get message 61259 Material requires configuration and the message (below) indicates that characteristic values need to be maintained. 
    What Iu2019m looking for is a way to allow MRP to plan these items without having to maintain a profile for thousands of materials.  Also, so it would enable the ability to maintain the forecast for those items in MD62.
    ERROR MESSAGE IS BELOW:
    Material requires configuration
    Message no. 61259
    Diagnosis
    Orders and requirements for a configurable material must have characteristic values.
    Usually, you should create a variation for configurable materials managed in inventory management which has the default variant configuration.
    System Response
    MRP: Requirements without characteristic values for a material cannot be planned in MRP.
    Procedure
    Check requirements or orders.
    Create a configuration evaluation for the material in the material master record if necessary.

    Hi,
    Please check below link.
    http://help.sap.com/saphelp_ides/helpdata/en/0a/857463c87611d1a7760000e8a5f6c8/content.htm
    Regards,
    Anil

  • Issues in retrieving the Planning profiles in CRM from BW while doing CRM-BI Integration

    Dear Folks,
    We are in the process of doing the SAP CRM & BI Integration wrt Trade Promotion Mangement.
    For testing purposes, we tried to create a planning profile in BPS end i.e BW SEM system & trying to retrieve it from the CRM system using the below navigation.
    SPRO-->CRM--> Define Transaction types--> ZBPD is the transaction type we had created.
    And in Customizing Header level, in SEM Planning tab, trying to retrieve the Planning profile created in SAP SEM-BW.
    Tried to search in both ways i.e prefixing the 'zprofile' with /prf/zprofile but still CRM system is not reading the same from BW system.
    What ever the pre-requisites that are needed to be followed before doing all these, the same had been done in terms of creating the RFC Connections etc but still unable to retrieve the same.
    And also not finding any standard content in the form of Planning areas & profiles at BW end after installing the SEM BW component add on in BW system.
    Could you pls let us know what we are missing here.
    Thanks in advance.

    I meet the same problem, any solution?

  • HT2500 Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!

    Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!

    Lord K.  Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it.  It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me.  My messages were in folders for a lawsuit.  It is going to take an incredible amount of work for me to, you have no Idea.  We are talking thousands of pages!  I the defendent will have them during discovery so I am not so worried.  However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part.  THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

  • Cannot change  planning profile group from Marketing Plan

    I try to change the Planning Profile Group of a marketing plan from 'Business Marketing' to blank and get the error message
    Transfer of char. val. combination only allowed with a time specification
    Does anyone know what it means?
    Philip

    Hi Philip,
    Are you specifying Time details in the Planning sheet.
    Please check the same as it is one of the primary dimensions.
    Best Regards,
    Pratik Patel

  • Planning Proposal -  Transport.plan.pnt from data profile not considered!

    Dear Gurus,
    When clicking on the Planning Proposal to manage my deliveries I have the following 2 messages of error:
    1-  Transport.plan.pnt from data profile not considered!
    2-   Shipment type from data profile not considered!
    What does that mean and how can I modify this situation
    Many thanks in advance for your help
    Chris

    Closed

  • How can we define time stamp in rough cut planning profile

    Hi all
    There is no time stamp(From date to date) in Rough cut planning profile and it is just time span (0-5 ,5-10,... workdays) . If I have different capacity for my resource in different intervals how should I define it so that in planning table it can take it to account and show me requirement versus avalilable capacity acoordingly.Note that we are working with repetitive plannig and our resources are lines which have different production rate between each interval.
    Regards
    Babak Bolourchi

    Dear,
    In REM you can use planning table through MF50 for your requirement.
    For time stamp in rough cut planning profile   please refer my reply from this link,
    [Rough cut planning|Rough cut planning profile]
    [Link 2|https://forums.sdn.sap.com/click.jspa?searchID=25236413&messageID=6404039]
    Hope it will help you.
    Regards,
    R.Brahmankar

Maybe you are looking for

  • File saved as .5 file type with CS5, How to Open in CS5

    I've been working on a certificate and i saved it without looking at the file type. For some reason it set the file type to (.5). What is that? Is there any way I can open it again in CS5? Is there a file converter I could use. I just need to basical

  • Cloning the GeneratedValue for another column during insert

    I have an entity for a MSSQL table with IDENTITY auto-generated primary key column. I want another column (int as well) to have the same value set during an insert. How can I do this using JPA? It's my understanding that the @Id and @GeneratedValue(s

  • Regd : BAPI_MOSRVAPS_SAVEMULTI3 (SCM 4.1)

    Hi,   Am using the BAPI "<b>BAPI_MOSRVAPS_SAVEMULTI3</b>" to create Planned Orders. There is a problem with one of the parameters "<b>ORDER_START_DATE</b>" . Though am passing the value for this field, still the orders are getting created with order

  • Running JRA recording with Weblogic running as a service

    Is it possible to run JRA recording while running the WebLogic application server as a service? The spec for our environment is as follows: - JRockit JVM version: JRRT 3.1.0 1.4.2 - Weblogic version: 8.1 SP6 - OS: Windows XP SP3 Ideally, we would lik

  • Podcast episode not updated on itunes

    I uploaded a new episode to posterous however iTunes has not updated my episode and still has not refreshed my cover art. Here is my feed http://mysemeneya.posterous.com/rss.xml Feed Address:     http://feeds.feedburner.com/ MySemeneyaPodcast Please