Variant configuration- with strategy 40
Hi,
We have gone variant configuration. And our planning strategy is 40 with weekly lot size.
Now the sales orders are created with different characterisitic values for same material
EX - sales order 1 - 10 pcs- size 20.
sales order2- 15 pcs - size 40.
sales order 3 - 20 pcs - size 30.
here size is a characteristic.
The sales orders generated in a week are combined (because of weekly lot size) into one planned order.and into production order.
The production order thus generated is combineinng the total quantities of different sales order.
My question is how the production departtment should how much quantity is of what size.(characteristic).
Thanks in advance
Kalyan
Hello
As a Best Practice . for VCs you should activate ND in MRP1 - material masteri.e. No Planning , and there is config in SD ( requirement class for Availability Check and Transfer of Requirements ) thru which the Production Order will be created automatically as soon as Sales Order for VC materials in created..
IMG path -
Hope it makes sense.
pl come back in case of further questions..
BR
Similar Messages
-
Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEVDear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene -
Implementing Variant configuration with Non-configurable assembly
Hi Gurus!
I have a scenario but don't know how to implement it.
My header material is configurable and has 3 semi-finished components under it. One of the semi-finished component contains a BOM with 2 raw materials, but this component is not configurable. I mean my model has a multi-level BOM but single a single level configuration. I want to implement an assemble-to-order manufacturing process for the header material. The component with 2 BOM items is manufactured in-house and the other semi-finished components are procured externally.
What kind of planning strategy should I use at the header level and should I maintain any special planning strategy for the non-configurable assembly?
I am new to SAP and also to variant configuration. So please give detailed explanation.
I have read the Planning strategies in the link SAP Library - Demand Management (PP-MP-DEM) but it is too confusing to me.
Best Regards,
Thileepan PHi Caetano Almeida
Thank you for the links. I got a few more questions after reading that.
1. In order type settlement profile which order should I check? I am creating a sales order (OR) for a configurable material in MTO strategy 25. In that case should I check "SD1 Sales Order MTO Production"? If so, am I looking at the right screen (refer screenshot below) and are the settings correct in my system?
2. As you have mentioned in the other links. Is it fine to make changes in material valuation in OMS2? Have you come across any situation in which this change has led to other inconsistencies?
Thanks and Regards,
Thileepan -
SD Variant Configuration with manual entry cut length variant
Hi Expert,
I have one scenario in variant configuration where client want to put one variant value manually and according to entry price variant for example 4 M cut length should pick up automatically in variant pricing.
Please check below example.
X-Material
I have created variant one Cut length and once Coated colour.
Character Cut length with no value as customer want put manually like 4 M ,4.2 M .......etc as per requirement.
Character Powder coated with different colour value like red,blue,pink etc......
Character Price with SDCOM table
Condition class ZClass with above character....
Dependencies ZPrice with above character combination
CU50 characteristic value assignment.
I have maintain condition record for VA00 with all character value....
Now I m creating sales order with X-Material where I will get option for variant for cut legth enter manual...4 Meter
and powder coated with colour option ,here I m getting price for colour which is coming from condition record...but not getting for cut length which we have enter manually...
One more thing sales qty sales in pieces and pricing should be in meter...so when I will sales X-material in pieces then pricing should be in meter.
Please suggest as this is urgent requirement...
Thanks in advanceI m surprise no one has given any suggestion...
anyway closing this thread..
Thanks
Edited by: KHAPREVIPIN on Feb 22, 2012 2:55 AM -
Variant configuration with Sales order?
Dear SAPIENTS,
I require variant configuration scenario in case of sales order, batch mangement, MRP, production order.
Regards,
Kaushal Rai
Edited by: Kaushal Rai on Feb 27, 2009 2:06 PMDear,
Follow these steps.
1. Create the Characteristics in CT04.
2. Create the Class in CL02. (Class type 300)
3. Assign the characteristics to the above created class.
4. Create the material (Product) in MM01 with material type KMAT.
5. Assign the Class created in Step 2 to Classification view of Material.
6. Create the configuration Profile in CU41. to the necessary setting to in it.
7. Write the dependencies (Precondition, sele, procedure) in CU01.and Create Dependency net in CU21.
8. Assign sele, procedure, Dependency net in Configuration Profile.
9. Assign Preconditons to Chracteristics or Char values in Class.
10. Check the model in CU50. whether your depencies or working file or not.
11. Create the Supr BOM and Super Routing and attach the dependences in the respective and check whether your bom components and required operations are picking or not in CU50.
12. VK11 - Enter VA00 (Condition) For Std RVA001 Pricing Procedure.
Please refer this thread,
variant configuration
http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
Regards,
R.Brahmankar -
Variant Configuration Planning Strategy
Hello All,
We are using Variant configuration and we want to maintain independent requirements for the dependent materials. The main material will be make to order and we want the dependent requirements from the main material to reduce the independent requirements maintained for the dependent materials. Please let what planning stratagies should i use for the main material and dependent materials. Due points will be awarded.I don't know if R/3 supports full fledged planning based on characteristics but I do know characteristics based planning can be done in APO. The following documents talks a little bit about planing characteristics in the end in R/3, you may want to take a look at it.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903bb9b8-f15b-2910-8381-ab05bdcac2c1?QuickLink=index&overridelayout=true -
Variant Configuration with Item Category Gp. ERLA
Hii,
My requirement is , I have finished good, which has item category gp. ERLA. the finished good is non-configurable , but its BOM Components are Configurable..Is it possible to create Sales order with this finished good ( non - configurable) and sytem will copy its BOM ( sales order bom is created) and allows me to do configuration of the line items i.e BOM Components..
Please suggest me...
Regards,
Sachinsee maintaing variatns for sub items shoudnto be a problem
all you need to do is insted or erla - - taq
or norm taq - tan / or kmat taq - tan
ok now configure vaiant settings for you sub item .... -
Variiant configuration with material varaint
Hi
I had creted material with material type FERT, i want to use this as configurable , i made "Material is Configurable and Material variant" in Basic data 2 view.I am using strategy 10 (MTS)
I made all the settings class, characters,configuration profile etc. Its working fine in Cu50 screen.
when i am creating Production order using co01.the cdonfiguration is not poping when i tried from header screen its just in display mode.
MY requirement is depend upon configuration characterstics BOM components/qty has to come in Production order.
How to configure this.where i have missed the settings?
Regards,
srihari.MDear Srihari,
If you want to create configurable material with material type FERT, you must maintain :
1. Basic data 1 : General item category 0002 configuration
2. Basic data 2 : Tick material is configurable
3. Maintain classification with class 300
4. confuration profile in cu41
5. MRP 3 : Strategy 25, not 10 (it is make to stock strategy not configurable)
6. Maintain super bom and super routing, you can use object dependency in item bom and operation to characteristic in class.
also consult with your SD team, you need to maintain delivering plant and item category group in sales distribution view, also variant pricing in class 300 that you create for configurable material.
Important note : You can not configure using variant configuration with CO01 create pro manually because in variant configuration concept the all characteristic chosen in sales order step, try run MRP, check planned order with configuration then you can create PRO by converting this planned order.
If you use material variant :
1. maintain material like other finished good, do not check configurable tick.
2. In MRP 3, link this material variant to its material configurable and define the fix characteristic with for variant.
3. You can create link for bom with CS40.
then you can create manually with CO01 for this material variant
Hopefully it clears you
Regards,
ArmanLie -
dear experts
i am working on variant confg scenario(retail based).
So while creating BOM, I am giving class item.
but class type 026 is taken automatically while creating class(charateristic profile).
Then while adding as class item, it is giving error " class type 026 does not support configurable
objects.
Also i am not getting ways to create class & charateristics using class type 200
So plase guide me on this issue
Regards,
sameerHi Sameer,
Unfortunately, you cannot carryout variant configuration in SAP IS Retail System.
Once the Retail Switch is activated you cannot use certain manufacturing-oriented processes
in an SAP Retail system.
You cannot create class type 300, 200.
You cannot add object dependencies to the in config profile as for that the material have to be KMAT type.
You can use the Generic/structured article for this concept, it behaves similar to that.
SAP Retail completely supports the special function for handing generic
articles in MM and SD only, not in the other standard areas.
SAP Retail does not support the following R/3 functions:
Variant configuration with variants subject to inventory management
Variants for generic articles cannot be used in variant configuration.
Hope it helps.
Regards,
Anirban Roy -
Production Order BOM with Variant Configurable Material
Hi,
I have a requirement to process the document items in the Production Order BOM for a variant configurable martial. I am not sure which Function Module will do this purpose. I checked the FM: CS_BOM_EXPL_MAT_V2 and does not seem to be working.
Can you please help me with a suitable Function Module or program that will process the Production Order BOM? Appreciate Your Help.
Thanks,
Kanan
Edited by: Kannan SA on Jul 6, 2011 8:59 PMWhat are you doing with the characteristics right now ?
If you want operations selected based on characteristic values, you need to have dependencies written just like you do (or in your case, will do) in your BOM components.
I understand the business-push to not do things 100% at the start and just "oh we'll add that part later" but I would really push back to get that part included initially. -
Creation of sales order with Variant configuration info
Hi friends,
I am creating sales order along with Variant configuration data. We have 3 level BOM structure.
I am using BAPI_SALESORDER_CREATEFROMDAT2 and filling in ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_PART_OF ORDER_CFGS_VALUE, ORDER_CFGS_REFINST
tables exactly the same way BAPISDORDER_GETDETAILEDLIST FM returns.
Sales order is being created with no variant configuration information.(Not in the header level atleast)
Can any one help me on this.
Thanks
SeshagiriUpdating Variant Configuration data for SO item became little tricky for us in an ongoing implementation. After spending some hours investigating the correct combination of data to pass, we were able to post the document correctly. As no detailed documentation is available online for this scenario, I hope this post will help community for similar requirements. J
For updating Variant configuration (VC) data for Sales order item, we need to populate below tables of standard FM or BAPI (e.g. SD_SALESDOCUMENT_CREATE).
Normally the standard FM or BAPI does not return any error messages in case configuration data is not updated successfully.
· SALES_SCHEDULES_IN: The required date field should be populated with appropriate value (REQ_DATE).
· SALES_ITEMS_IN: Field PO_ITM_NO should be populated with appropriate value.
· SALES_CFGS_REF Table:
1. This table should have 1 record per item.
2. Combination of CONFIG_ID and ROOT_ID should be unique across line items.
POSEX
000010
CONFIG_ID
000001
ROOT_ID
00000001
SCE
1
COMPLETE
T
CONSISTENT
T
CBASE_ID_TYPE
G
· SALES_CFGS_INST:
1. This table should have 1 record per item.
2. Combination of CONFIG_ID and INST_ID should be unique across line items.
CONFIG_ID
000001
INST_ID
00000001
OBJ_TYPE
MARA
CLASS_TYPE
300
OBJ_KEY
MATNR value
QUANTITY
Quantity value
QUANTITY_UNIT
Quantity Unit
COMPLETE
T
CONSISTENT
T
OBJECT_GUID
MATNR value
PERSIST_ID_TYPE
G
· SALES_CFGS_VALUE:
1. Combination of CONFIG_ID and INST_ID should be unique across line items.
2. We can have multiple characteristics for a material. In that case appropriate records should be inserted in this table. Note that CONFIG_ID and INST_ID should be same for all the rows you insert in this table for multiple characteristics for a material.
3. The characteristic value should be in SAP internal format.
CONFIG_ID
000001
INST_ID
00000001
CHARC
Material characteristics
VALUE
Material characteristics value
· SALES_CFGS_VK:
1. Combination of CONFIG_ID and INST_ID should be unique across line items.
2. We can have multiple characteristics for a material. In that case appropriate records should be inserted in this table. Note that CONFIG_ID and INST_ID should be same for all the rows you insert in this table for multiple characteristics for a material.
CONFIG_ID
000001
INST_ID
00000001
VKEY
Material characteristics -
Create a production order with variant configurator data
Hello,
Can anyone tell me the way to create a production order with variant configurator data. Is there a BAPI ? an IDOC ?
Is there several steps ?
I have to create an interface which creates automatically PP orders. The data input is a file.
Thanks for your helpHi,
There are fews BAPI's available for creation of Production Order. They are:
BAPI_PRODORD_CREATE
This bapi will suit to your requirement, as input will be provided from file.
Others are
BAPI_PRODORD_CREATE_FROM_PLORD " this converts planned order to production order
BAPI_PRODORD_CREATE_FROM_REF " this creats production order considering other production order as reference.
Hope your query is answered.
Regards,
Brajvir -
Process order with variant configuration material
Hi,
I create a process order for a material XX.
This material has a BOM with a material that has variant configuration "class type 300" for price configuration.
When I save the process order I get a message saying "There are still characteristics for components to evaluate". I dont want to evaluate this material in my process order.
What can I do to not have this message?
Regards.Hi all,
Yes, I work with variant configuration. But sales orders are not involved.
What I do is:
1) I create a purchase order for material X (this material belongs to a BOM), this material has variant configuration. I give a value to the characteristics in the PO.
2) I create a process for a material XXX that has a BOM (material X is in the BOM and cannot be removed).
3) When I save the process order the system asks me to evaluate again the characteristics. This is what I dont want it to do.
Any ideas?
Regards.
Eduardo -
Save variant configuration data with BAPI or FM
Hi experts,
I created a PP production order by using a configured material.
I can see internal object number in table AFPO-CUOBJ.
I'd like to change and save a value of characteristics by using ABAP.
Could you tell me it if there is a BAPI or FM to save values of characteristics in variant configuraion?
BR,you can chnage the variant configuration data using below bapi with strcture order_cfgs_value =
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument
order_header_in =
order_header_inx =
TABLES
return = return_lt
order_item_in =
order_item_inx =
partners =
partnerchanges =
partneraddresses =
order_cfgs_ref =
order_cfgs_inst =
order_cfgs_part_of =
order_cfgs_value = -
BAPI/FM in ECC to create a sales order with variant configurable material
Hi all,
I need to create a function module that creates a sales order in ECC with a variant configurable material.
can some one tell me if there is a in built function module or BAPI that i can make use of to create a sales order with variant configurable material in ECC.
Regards,
Jessica SamThanks MxG,
I dont know how to use this BAPI. .Can you suggest me a sample code.
My reqmnt is, i have
Sold to party, ship to party, bill to party , VC config material and all char values that should be populated while creating a sales order.
please help me with what values should i populate in i/p paramters and and how to use this BAPI with some sample code if posible.
Regards,
Jessica.
Maybe you are looking for
-
When logging on to my apps on my I phone 3 when I try to download an app an it sends me to my credit card info and it is all stored. And has been but now it keeps telling me my cvv# on back of my card is wrong! I of course know it is not wrong but it
-
Good day. I need some help... I just installed a new computer and I had to download Acrobat to my system. I have a paid subscription that I have not been able to use for a month because I keep getting the above error message. I have also placed below
-
I ran software update and downloaded Quicktime 7.6.9 update, after restarting my computer a message read "bad/damaged source code" and i cant watch movies, open final cut, or itunes. I have since tried to download quicktime from the Apple website, bu
-
Cannot Drop (but can Drag) Free Podcast into my ishuffle
please help. how do i drop my npr podcasts into my shuffle? i've read and searched this forum all over and have not had any luck. i can play the podcast via my desktop, can drag the podcast into my library and into a seperate playlist, but cannot get
-
Hi All, We are facing strange problem in LSO in displaying the course catalog properly for all users. We are using mySAPERP 2005 (ECC 6.0) SP11. LSO 600 FE, We are using structural authorization profiles in the R/3. The catalog was displaying the cat