Variant Creation in SAP BI To be used information broadcasting

Dear Friends,
                        I want to create a VARIANT in SAP BI 7.0 Which is to be used in information broadcasting. I found One Document Named as "Variant Creation In SAP BI to be used in Information Broadcasting.pdf",in SDN Forums. I Couldn't able to Understand the Given Steps in it.
  Could any one of You Please send me the Procedure how to create a Variant.I should also see the "Determine from Variants" button in Work book precalculation Tab,which i am not able to see it currently under "Workbook Precalculation".
Waiting for ur reply.
Thanks in advance
Regards
Singam Bhaskar Reddy

Hi,
Even I have gone through the SDN document. It is clearly explained step by step. If you follow the same document thoroughly you will be able to see Determine From Variants radio button properly.
Try to understand the document.....you will get the solution.
Regards,
Suman

Similar Messages

  • BEx Query output in Enterprise Portal using "Information Broadcasting"

    Dear Experts,
    I am having BEx Query output in Enterprise Portal
    EP 6.0 and BW 3.5 version
    I am trying to send email attachments from
    Portal Query directly
    using "Information Broadcasting"  tab button
    ==================================
    Email gets triggered Okay,
    but Portal URL link is not showing correctly
    Here is an Online Link to the BI Document: http://mtv01spbw01.businesssap.com:8100/sap/bw/BEx?CMD=LDOC&INFOCUBE=0CRM_OPPH&QUERY=0CRM_C04_TESTQ001
    <b>The URL above is coming wrongly,
    I want it to point to
    http://mtv01spbw01.businesstree.com:8000/sap/bw/BEx?CMD=LDOC&INFOCUBE=0CRM_OPPH&QUERY=0CRM_C04_TESTQ001</b>
    Please help me to correct this error / wrong configuration
    any help links would also be appreciated
    Thanks,
    Aby Jacob

    Hi Jacob,
    Here, p/s refer to this links.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm</a>
    OSS Notes : 760775
    Hopefully it can helps you a lot.
    Many thanks.
    Regards,
    Niel.
    (Many thanks for any points you choose to assign).

  • How to use information broadcasting bursting option?

    Hi all,
    I am unable to find the option for the information broadcasting bursting option? can anyone pls advise me on this!!
    I have the precalculation server but still i cant find the bursting option ? were can i see it?
    Thanks
    Pooja

    Hi Pooja,
    Are your precal server setting are ok? Check the settings for the pre calcualtion server once.
    Check the below links
    /people/community.user/blog/2006/12/28/exception-broadcasting-in-sap-netweaver-2004s
    http://help.sap.com/saphelp_nw04s/helpdata/en/8c/11984197eb2e7be10000000a1550b0/frameset.htm
    https://service.sap.com/~sapidb/012003146900000085752006E/HowtoInformationBroadcasting.pdf
    /people/sap.user72/blog/2005/12/23/summary-of-new-features-for-information-broadcasting-in-sap-netweaver-2004s
    REgards
    KP

  • CL_RSRD_PRODUCER_PRECALC Error when Printing using Info Broadcasting

    Hi,
    I get the following error when trying to print from the Portal using Information Broadcasting - CL_RSRD_PRODUCER_PRECALC, type PROD.  I am trying to print using PS or PCL not PDF.
    We are running SPS12.  The printer is setup in BW and tested.  All other connections between Portal and BW appear to be working.
    Any ideas?
    Thanks,

    Thanks,  but that note applies to Patch 8 and as mentioned we are running SPS12.
    Basically what happens is we get a blank browser window for some time then the error returns as mentioned in my original post.

  • Extracting a Report from SAP Spool into a Useful Excel 2010 Format

    Hi All,
    Extracting a Report from SAP Spool into a Useful Excel 2010 Format.  I'm currently running the following report in SAP  and would like the
    ability to set this report up as a recurring report running weekly and
    subsequently access this report in a useable Excel 2010 format without
    much data manipulation.  Can you please assist me.  Below, I've tried to
    provide an example of what I'm encountering.   Thanks, beforehand for
    your assistance.
    Here goes:
    Step one: Run 62 Report in SAP S_P99_41000062- Material List Price and
    Inventory
    Step 2. Select stored Variant "Weekly KPI", ok. Enter the enter  the
    desired company code and period I want thre report to run for and update
    the currency, if necessary. Having input my desired criteria, I believe
    I can either execute immediately, run in the background, preset to run
    at date in the future. For this example let's just execute, immediately.
    This is where the difference originates. Given, I run this report
    immediately, I'm able to simply extract the result to Excel via the list
    selection noted in the tool bar below.  The result is a data friendly
    excel 2007  report is automatically generated.
    Export to Excel via list:
    Select save and Excel 2007 opens automatically:
    That said, the method outlined above works perfectly fine if you want
    the report immediately.  Now let go back and run the exact same report
    with exceptoin of running it in the background and having to retrieve it
    from the Spool (SP01) uisng my user ID.  Given the report generated in
    the background,  I would now access the report via the spool and make
    the following selections:
    SP01 + execute to see my report
    I would hit the sunglasses to see the actual report, then want to
    extract this report to Excel by selecting the export option.
    I would at this point select spreadsheet and be given an option to save
    the spreadsheet to local file. However, upon trying to open the
    spreadsheet I will receive an error messageindicating that the format is
    different than that which the file I am currently trying to open it
    with.  I'm currently running Excel 2010 on my computer.  The currency
    format and other issues arrise with this extract.  Please help. 
    Thanks,
    Chowadary.

    Update to Latest GUI.
    Use   List -> Export -> Spreadsheet  to get the output to excel.
    I remember in ALV max length allowed is 1023 characters and the max no of columns supported is 90. Issue occurs when row size of exported data gets more than 1023 character. (This includes if Long/Medium Header Text used ) If it exceed 1023 character the columns splits and moves to next row.
    Check your fieldcatog for header lengths.
    -Satya

  • Can I automate the creation of a cluster in LabView using the data structure created in an autogenerated .CSV, C header, or XML file?

    Can I automate the creation of a cluster in LabView using the data structure created in an auto generated .CSV, C header, or XML file?  I'm trying to take the data structure defined in one or more of those files listed and have LabView automatically create a cluster with identical structure and data types.  (Ideally, I would like to do this with a C header file only.)  Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I've looked into EasyXML and contacted the rep for the add-on.  Unfortunately, this capability has not been created yet.  Has anyone done something like this before? Thanks in advance for the help.  
    Message Edited by PhilipJoeP on 04-29-2009 04:54 PM
    Solved!
    Go to Solution.

    smercurio_fc wrote:
    Is this something you're trying to do at runtime? Clusters are fixed data structures so you can't change them programmatically. Or, are you just trying to create some typedef cluster controls so that you can use them for coding? What would your clusters basically look like? Perhaps another way of holding the information like an array of variants?
    You can try LabVIEW scripting, though be aware that this is not supported by NI. 
     Wow!  Thanks for the quick response!  We would use this cluster as a fixed data structure.  No need to change the structure during runtime.  The cluster would be a cluster of clusters with multiple levels.  There would be not pattern as to how deep these levels would go, or how many elements would be in each.   Here is the application.  I would like to be able to autocode a Simulink model file into a DLL.  The model DLL would accept a Simulink bus object of a certain data structure (bus of buses), pick out which elements of the bus is needed for the model calculation, and then pass the bus object.  I then will take the DLL file and use the DLL VI block to pass a cluster into the DLL block (with identical structure as the bus in Simulink).  To save time, I would like to auto generate the C header file using Simulink to define the bus structure and then have LabView read that header file and create the cluster automatically.   Right now I can do everything but the auto creation of the cluster.  I can manually build the cluster to match the Simulink model bus structure and it runs fine.  But this is only for an example model with a small structure.  Need to make the cluster creation automated so it can handle large structures with minimal brute force. Thanks!  

  • How to restrict Duplicate Customer Creation in SAP

    Dear all,
    How can we restrict duplicate customer creation in SAP SD.
    We are into retail sector, across the store customers are being created by different employees.
    in this way for many customers more than one business partner records are being created.
    we are looking for a sytem wise functionality to restrict the customer master creation (for Sold to party only) if name1, telephone number and street field values are same, then system has to stop customer creation by giving an error message.
    Is there any standard functionality to address these requirement. If so how could we configure it.
    Any of you can help us to solve the issue. your solutions and help will be highly appreciated.
    thank you.
    Raghu ram.
    Edited by: Raghu Ram on May 26, 2008 5:34 PM

    Hi,
    2 solutions :
    - Procedure manually (no SAP) ;
    - Use extension SAP (SMOD : SAPMF02D) to check with differents data before recording.
    No solution in standard.
    Regards,
    Lionel

  • Designer hangs during universe creation against SAP BW

    Hi,
    We are trying to create OLAP universe against SAP BW 3.5 and we are running into issue wherein the designer just hangs and is not able to create the classes and objects, in most cases we have waited for about 30-35 mins and still it doesn't come back. We tried this for both against an Infocube as well as against BW query.
    I have couple of questions regarding the process flow for universe creation against SAP BW,
    Does universe stores/extracts any data from BW, like storing LOVs for the hierarchies? I know it does reads the rows, columns, free characterstics etc. in case of BW Query.
    The time to create the universe depends on what factors, size of the cube or amount of metadata? The customer is concerned regarding what is the guideline on how much time would this process take when the universe comes back with the classes and objects. If there is any such guideline, what is it?
    Any response on this is appreciated.
    Thanks,
    Amit Banavalikar

    I had similar problems, setting the "Connection timeout" on the SAP/BW connection within Designer (default 10 minutes) from 10 min. to 60 or 120. ALSO: uncheck the universe limits on "number of rows (5000)" and "query duration (10 min)".
    This solved the problem.
    The connection timeout which is set directly on the SAP-BW connection in designer seems to be used in a wrong way. The definition of the "close connection after xx minutes" means that the connction should be closed after xx minutes of  not being used by any process.
    With SAP BW the connection seems to be closed regardless of it's use after the specified time period.
    regards,
    Walter

  • Variant Creation for the Back Ground Jobs

    Hi experts
    1) What are the settings we need to consider in the Variant Creation for generating CVC's, Planning Area Initialization, Calculate Proportional Factors and Loading planning area.
    2)I believe  Process flow to create process chain:
    Generate CVC's-->Planning Area Intialization>Load Planning Area Vesrion--
    >Calculate Proportional Factors
    Please correct if the process flow is not right.
    3) Is it require to check the adjust time series for generating CVC's for every time?
    4) How to generate the proportional factors for all the products in the single job?I assume that  need to create a single selection ID which has all Characteristic values and assign this while creating the Proportional factors.Please correct me if i am wrong.
    Please give your valuable opinions on the above queries
    Thanks in advance
    Edited by: Mani4690 on Mar 4, 2009 9:37 PM

    Hi,
    Below are the answers to your queries.
    1) What are the settings we need to consider in the Variant Creation for generating CVC's, Planning Area Initialization, Calculate Proportional Factors and Loading planning area.
    While creating CVC's (t-code /n/sapapo/mc62)select your MPOS, goto create characteristic combinations, then enter Target mpos, say generate in background, tick against all fields in action selection, and then save as variant. During planning area initialisation(/n/sapapo/msdp_admin), select your planning area, right click and say create time series objects and then enter planning version, start and end dates and execute job in background.  While calculating proportional factors (/n/sapapo/mc8v), enter ur planning area & infocube and then save as a variant.  For loading data from infocube to planning area (tcode /n/sapapo/tscube), select the infocube, planning version, planning area, planning versin, periods, tick mark in results log, key figure assignments, if you have any selection criteria enter, and then save as variant.
    2) 2)I believe Process flow to create process chain:
    Generate CVC's-->Planning Area Intialization>Load Planning Area Vesrion--
    >Calculate Proportional Factors
    Please correct if the process flow is not right.
    Correct
    3) ) Is it require to check the adjust time series for generating CVC's for every time?
    Yes, it is required.
    4) How to generate the proportional factors for all the products in the single job?I assume that need to create a single selection ID which has all Characteristic values and assign this while creating the Proportional factors.Please correct me if i am wrong.
    if you use mc8v t-code and provide planning area & infocube, it will ask for version name and dates, once u enter this info, proportional factors will get created.
    Regards
    R. Senthil Mareeswaran.

  • SAP best practise to use transportation component

    Hi,
    I need to know when should be the shipment created after delivery? When Shipment create for group of deliveries?
    Indeed I would like to know the SAP best practices to use transportation component. Please forward if you have any related links which describe the SAP best practice to use transportation component.
    Thanks,
    Victor

    Dear Victor,
    The shipment document will be created after delivery creation but before Post Goods Issue(PGI).
    When the deliveries belongs to the same route you can create shipment document for group of deliveries.
    For more information go through this Help link it will help you,
    http://help.sap.com/saphelp_47x200/helpdata/en/93/743c21546011d1a7020000e829fd11/frameset.htm
    I hope this will help you,
    Regards,
    Murali.

  • Variant creation

    Hi,
    We have a variant for a SE38 program, which is being used by a batch job to execute the program in the background.
    We would like to change the variant directly in production, but find in the attributes that the variant is protected.
    My questions are:
    1) How can I change the variant
    2) If I cannot change the variant then I would like to delete it and create a new variant with the same name. In that case how can I enter values in the attributes? Because on the selection screen of the program, there is a field called Idoc Run Date. This field should be populated dynamically. In the current variant (which we would like to change) find that there is a parameter for idoc run date RS_VARI_V_TODAY_X.
    3) If I delete the existing variant will it also delete the parameter RS_VARI_V_TODAY_X.
    4) How do I create the parameter RS_VARI_V_TODAY_X (or any other parameter). and attach it to the new variant.
    Any help would be appreciated.
    Thanks in advance.
    MIck

    Run your program in online mode in production.
    On the selection screen, put all the values you want to store as variant.
    Now press the Save button.
    You will be directed to Variant creation screen.
    Give your variant name.
    Save it.. it will ask for "overwritten".. say yes.
    Regards,
    Naimesh Patel

  • Creation of SAP Query in SQ02 with Single Table With Condition

    Hi All,
    I want to Create SAP Query in SQ02 using single Table MCHA.
    ii) I dont want all entries of MCHA Table I mean , I have to apply some Condition on this Table.
    i.e  Suppose I am having actual data in MCHA table is like this for Material M1.
    Plant    Material   Batch   BatchCreationdate
    P1          M1         B1       20.06.2007
    P2          M1         B1       04.05.2009
    P3          M1         B1       04.05.2009
    But I want the Output of SAP Query is like this:
       Material   Batch   BatchCreationdate
          M1         B1       20.06.2007
    That is irrespective of Plant if Material & Batch are equal ---> 1st record with Lowest date shoud get at the output.
    Please help me How write the code on single table in the SAP Query.
    Thanks,
    Kiran Manyam

    Hi,
    Your query should be like this:
    Select MATNR CHARG HSDAT
    from MCHA
    into table t_mcha
    where matnr = Materlal number from selection screen.
    The structure of t_mcha should contain the fields that you select.
    Then sort the table by date ascending
    Sort t_mcha by HSDAT.
    Hope this solves your problem.
    Thanks,
    Sowmya

  • Creation of IS OIL TD Shipment using Inbound IDOC Processing?

    HI Expert,
    We are on IS OIL 4.72E version . As part of once of our requirement we need to process inbound shipment IDOC from SCM system and create the TD Shipment document in R/3 ..
    Delivery is already created in R/3 ; In SCM assginement of vehicle is done and IDOC is transferred to R/3.
    I want to know how to process this inbound shipment IDOC ; for creating only TD shipment not the delivery as it is already exist.. what is the process code and function module to be given in partner profile....
    Kindly explain me step by step if possible....
    Regards,
    Adityakumar Waghmode

    Hi,
    Function module field is used to define the path functionality of file generated.
    EDI_PATH_CREATE_CLIENT_DOCNUM is the recommned fucntion by SAP .
    Function is used to prevent unprocessed files being overwritten.Tihs function generates file directory path dynamically.
    Hope this helps.
    Thanks.
    Mark points if helpful.

  • In a future version of ibook author would be very useful to provide for the creation of shared content online. Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

    in a future version of ibook author would be very useful to provide for the creation of shared content online.
    Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

    As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc. 
    http://www.apple.com/feedback/ibooks-author.html

  • Installing SAP GUI on windows using Bootcamp on (MACBook)

    HI SDN,
    I am looking forward to buy MACBook.
    Please provide your suggestions on installing SAP GUI on windows using Bootcamp on MACBook?
    Are they any issues installing SAP GUI on Mac machine on Windows
    OS?
    Running Bex Queries, any excel integration issues while running BEx reports on Mac machine with windows Bootcamp?
    I really appreciate if you can forward any related information .
    Thanks
    (Full points will be awarded for helpfull answers)

    Hi,
    [SAP Mac Users Forum|iPhone & iPad Application Development;  is right place for this question

Maybe you are looking for