Variant Creation in Transaction MB51

Dear All,
I faced one Issue during creation of Variant in MB51 Transaction is like Below.
In Posting date field From to To in that i required from date is fixed and To date is Dynamic (Current date - 3)
So how can i set this?
In Variants we can give dynamic date calculator to calculate date as we required.
Does there is a option to add more selection option (ie if I have to add a Fixed date , Current date -3).
Where I can do this?
Regards,
Murari Shah

Hi,
> In Posting date field From to To in that i required from date is fixed and To date is Dynamic (Current date - 3)
Follow as following,enter your From date & Select Save as Variant, New window appears, there enter your Variant Name & Short Text,
Now Select Posting date from the Selection Screen-Field Name, there go to 3rd last column for "Selection variable" in posting date line & press F4 over there & select "D: Dynamic date calculation",
Now go to last column " Name of Variable" press F4, new screen appears, in that scroll down & double click on "Date - xxx, Date + yyy (work days)" or also you can use "Current date - xxx,current date + yyy", New window opens, here enter the values in numbers w.r.t. date,
If you want to Consider today's date always then put 0 in the first field or you can put addition of no. off days as per your choice, then in second field put 3(system will add 3 days from today date),
Then in field " Work days are determined according to factory calndr." enter "IN", press enter & save your variant, then execute again MB51 after coming out of all screens & check whether you requirement is achieved.

Similar Messages

  • Creation of transaction varient

    hi,
    My requirement is creation of transaction varient.
    already they have created transaction varient " ZBP"for transaction "BP".
    they are asking one more transaction varient for transaction "BP" with sliet different.
    my question was can take the copy of of old one and can make the changes as per the requirementment?
    how the new varient linked with transaction?
    Could you please provide me required steps.
    Thanks

    hi
    refer these two links, it would answer your questions.
    transaction variant
    Transaction variant?
    Regards
    Sajid

  • AFAB dynamic variant creation for Posting period.

    HI,
    Business Requirement :
    Business want to run AFAB transaction code every month automatically with schedule job.
    system should pick present month period in posting period field.
    i checked in variant creation  against posting period there is no dynamic " D " in selection variable column.
    how can i fix this.

    Hi Jani,
    Check with abaper if TVARV table can Help you in this case, or create a z program from AFAB. And add date field to it, and schedule job based on that,
    I think TVARV table will be a better approach.
    Another point to consider here would be that dep should be run once business is ready to do so, and has its own hick ups in business if corrections are required to be made after executing AFAB by job
    Regards
    Pankaj B.

  • Creation of transaction code for the table created

    Hi Experts,
    Can any one help me out with the steps that are used for creation of transaction for the table using the transaction SE93, i have created the table maintance generator.

    Hi
    Check TSTCP table  for the existing t-codes and for creating check this link
    Re: Transaction Code Creation for a Table/View
    Regards
    Pavan

  • Transaction code for creation of  transaction keys in obyc

    Dear Experts,
    Can u tell me what is the transaction code for creation of transaction keys in obyc asap.
    Thanks & Regards,
    Radhika.

    Hi
    There is no TCode and the path is
    SPRO-Material Management-Purchasing-Conditions-Price Determination....
    Cheers
    Srinivas

  • Variant Creation in SAP BI To be used information broadcasting

    Dear Friends,
                            I want to create a VARIANT in SAP BI 7.0 Which is to be used in information broadcasting. I found One Document Named as "Variant Creation In SAP BI to be used in Information Broadcasting.pdf",in SDN Forums. I Couldn't able to Understand the Given Steps in it.
      Could any one of You Please send me the Procedure how to create a Variant.I should also see the "Determine from Variants" button in Work book precalculation Tab,which i am not able to see it currently under "Workbook Precalculation".
    Waiting for ur reply.
    Thanks in advance
    Regards
    Singam Bhaskar Reddy

    Hi,
    Even I have gone through the SDN document. It is clearly explained step by step. If you follow the same document thoroughly you will be able to see Determine From Variants radio button properly.
    Try to understand the document.....you will get the solution.
    Regards,
    Suman

  • Variant Creation for the Back Ground Jobs

    Hi experts
    1) What are the settings we need to consider in the Variant Creation for generating CVC's, Planning Area Initialization, Calculate Proportional Factors and Loading planning area.
    2)I believe  Process flow to create process chain:
    Generate CVC's-->Planning Area Intialization>Load Planning Area Vesrion--
    >Calculate Proportional Factors
    Please correct if the process flow is not right.
    3) Is it require to check the adjust time series for generating CVC's for every time?
    4) How to generate the proportional factors for all the products in the single job?I assume that  need to create a single selection ID which has all Characteristic values and assign this while creating the Proportional factors.Please correct me if i am wrong.
    Please give your valuable opinions on the above queries
    Thanks in advance
    Edited by: Mani4690 on Mar 4, 2009 9:37 PM

    Hi,
    Below are the answers to your queries.
    1) What are the settings we need to consider in the Variant Creation for generating CVC's, Planning Area Initialization, Calculate Proportional Factors and Loading planning area.
    While creating CVC's (t-code /n/sapapo/mc62)select your MPOS, goto create characteristic combinations, then enter Target mpos, say generate in background, tick against all fields in action selection, and then save as variant. During planning area initialisation(/n/sapapo/msdp_admin), select your planning area, right click and say create time series objects and then enter planning version, start and end dates and execute job in background.  While calculating proportional factors (/n/sapapo/mc8v), enter ur planning area & infocube and then save as a variant.  For loading data from infocube to planning area (tcode /n/sapapo/tscube), select the infocube, planning version, planning area, planning versin, periods, tick mark in results log, key figure assignments, if you have any selection criteria enter, and then save as variant.
    2) 2)I believe Process flow to create process chain:
    Generate CVC's-->Planning Area Intialization>Load Planning Area Vesrion--
    >Calculate Proportional Factors
    Please correct if the process flow is not right.
    Correct
    3) ) Is it require to check the adjust time series for generating CVC's for every time?
    Yes, it is required.
    4) How to generate the proportional factors for all the products in the single job?I assume that need to create a single selection ID which has all Characteristic values and assign this while creating the Proportional factors.Please correct me if i am wrong.
    if you use mc8v t-code and provide planning area & infocube, it will ask for version name and dates, once u enter this info, proportional factors will get created.
    Regards
    R. Senthil Mareeswaran.

  • To provide "variant creation facility" in a Molule pool program

    Hi
    I have develope a molude pool screen with some  input fields.
    now I want to provide " variant creation facility" as in standard reports.
    I will enable "SAVE" button on the status bar. but  I have no idea how to  provide
    variant creation facility same as in standard reports.
    please help me .
    Regards
    Kakoli

    Hi,
    I doubt if it can be achieved by standard solution or FMs. But i have an idea. Check the feasibility of implementing it.
    Provide 2 buttons. One for saving the variant, other for selecting the variant.
    Create a Ztable with variant name as the key field and rest of the screen fields as non key fields. Now, on clicking the save button, update this Ztable with all screen field values. On clicking the get variant button, query this Ztable and provide a popup with available variants. If a variant is selected, populate the values from Z-table to screen.
    But can we handle table control with this approach!!!!??? I hope no.
    Thanks,
    Vinod.

  • Variant creation

    Hi,
    We have a variant for a SE38 program, which is being used by a batch job to execute the program in the background.
    We would like to change the variant directly in production, but find in the attributes that the variant is protected.
    My questions are:
    1) How can I change the variant
    2) If I cannot change the variant then I would like to delete it and create a new variant with the same name. In that case how can I enter values in the attributes? Because on the selection screen of the program, there is a field called Idoc Run Date. This field should be populated dynamically. In the current variant (which we would like to change) find that there is a parameter for idoc run date RS_VARI_V_TODAY_X.
    3) If I delete the existing variant will it also delete the parameter RS_VARI_V_TODAY_X.
    4) How do I create the parameter RS_VARI_V_TODAY_X (or any other parameter). and attach it to the new variant.
    Any help would be appreciated.
    Thanks in advance.
    MIck

    Run your program in online mode in production.
    On the selection screen, put all the values you want to store as variant.
    Now press the Save button.
    You will be directed to Variant creation screen.
    Give your variant name.
    Save it.. it will ask for "overwritten".. say yes.
    Regards,
    Naimesh Patel

  • Selection Variant for Standard transaction

    Hi,
    The requirement is that, On starting a standard transaction the initial selection screen should appear with a default selection variant selected in it.
    Regards,
    Prabaharan.G

    Sudhir,
    Are you sure about that ? I think the the SHD0 transaction creates screen variants only for  "normal" screens, dialog boxes, and subscreens . Not for  List display (and selection screens) ..
    I read this at - <a href="http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fe015111d396480000e82de14a/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fe015111d396480000e82de14a/content.htm</a>
    For example try and create a transaction variant for standard transaction FBL1N (make the Company code field Output only) .. is it possible ?
    Will someone please verify.

  • Screen Variant for ENjoy Transaction

    Hi all,
    I want to create screen variant for enjoy transaction, i.e fb60. Through the guide in another threads, I click on the square icon, above the scroll bar on the table control (used for entering document line items). When I create new variant, hide some columns and save this screen variant, everything is not changed. How to apply this screen variant to this transaction ?
    I also use function "Add screen variant" when right click on this screen, but nothing changes.
    Thank you very much for your helps.
    Sylvecat.

    That little button you mention (above the scroll bars) will not create screen variants for this transaction.
    You have to use transaction SHD0 (also accessible by pressing Ctrl+F4 once you are inside FB60).
    Search inside http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBCEX/BCDWBCEX.pdf for the keywords SHD0 more info on usage, etc. if you need help with SHD0.
    Please remember to assign points if found useful.
    Regards,
    Gulshan

  • Assign transaction variant to standard transaction.

    Hi All,
    I want to alter the column nos. in table control for transaction VA41 / VA42.
    I created transaction variant ZVA41 using tcode SHD0. I have created new tcode ZVA41_1 using SE93, option 4 - Transaction with variant. I have used transaction - VA41 and transaction variant ZVA41_1 in SE93.
    When i am testing this new Tcode ZVA41_1 from SE93 only, its working fine. but when i am executing tcode ZVA41_1 its not displaying screen as per new variant ZVA41. Its displaying standar screen of VA41. Not getting what else i need to do? I also tried to assign this variant as standard transaction but still no positive result. Its working fine when i am testing it but not working when i am executing it independently.
    Would appreciate your replies. Thanks

    Hi Patrick,
    When you create a transaction variant, I assumed you created a Z transaction that points to PZ03 with a variant. Then in your user profile, you should have this transaction code included. Parameter id tab in SU01 is for the default values of a parameter id when a user logs in.

  • How to call a variant for a transaction

    Is it possible to call a specific variant (say test) for a transaction like MMBE?

    Dear Pinkey,
    You can use transaction SHD0 (Transaction Variant)
    http://help.sap.com/saphelp_webas620/helpdata/en/eb/5fab41d79b11d296190000e82de14a/content.htm
    In the SAP Reference IMG, you can create transaction variants. Choose Basis Components -> Application Personalization -> Tailoring of Application Transactions -> Configure Transaction-Related Display Values for Fields (Transaction SHD0). Transaction variants allow you to preset values for fields in a transaction, set field attributes, or hide entire screens.
    To execute a transaction variant, you define a variant transaction using the Transaction Maintenance transaction (SE93).
    Once you have entered a transaction code and short description, choose transaction type Transaction with variant (Variant transaction).
    To define a variant, enter the name of the transaction and the name of the variant. You can then use the new transaction code to start the special variant of the transaction.
    Hope this will help.
    Regards,
    Naveen.

  • Standard transaction variant  ZMSC2 for  transaction MSC2

    Hi
    I have created a standard transaction variant  ZMSC2 for  transaction MSC2. When i do the recording for MSC2... I dont see the transaction variant being called..
    Please suggest

    hi
    any suggetions

  • T.code for Variant creation

    Hello Gurus,
    What is the T.code for variant creation
    regards
    sapmm

    Dear sapmm99,
    In my understanding the default values that should be automatically reflected for the input parameters for executing any report is
    referred as a variant.
    Say for Eg,executing report MB52,in case if I execute the report several times with the same input,i can save the input parameters
    and create that as a variant and in future i can call this variant to reduce the work load and execute the report.
    For eg: enter the plant 1000,material type as FERT,some material group and click on the save icon and the system asks to enter
    the variant name and the meaning and then select the check boxes for protect variant and click on copy screen assignment.
    If i want to protect the entered input parameters i can select the check boxes for the same and save and come out.
    Next time when i execute the same report MB52 and if I need some default values to get copied,i can get the variant by clicking on
    get variant or else Shift+F5 and select the saved variant.
    Check the same for the reports like ME5A.
    Check and revert.
    Regards
    Mangalraj.S

Maybe you are looking for