Variant in app

could anyone explain what is the purpose of the variant in app/

Hi,
The variant is used for choosing the program for printing or choosing the DME file format.
The program is alreagy there. Depending on the payment method, APP will automatically pick the program.
In this program there are many parameters which needs to be given as the input like the format of output etc. So we give some values for these parameters and store it as a variant. Thus we ask the payment program to use this variant for that program.
For more information regarding DME files and the variants refer to this link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/74/c20672e63d11d1a57a0000e839d005/frameset.htm
Regards,
Ravi

Similar Messages

Print setup configuration (variant) for app

Dear Gurus,
Thru FBZP i have configured the Payment run steps but when i do the payment run in f110 when i do the print job
it is saying that rogram RFFOAVIS: No records selected
Program RFFOAVIS: No records selected
Message no. F0073
Diagnosis
The system did not find any data to be processed in the payment dataset.
Procedure
Check the selection criteria with which you started the payment medium program RFFOAVIS and compare it with the payment list.

Hi Sridhar,
Go to SE38, end enter your program name (RFFOAVIS) and click on execute button. Then select print immediatly button and save it with a variant name.
Now whenever you are using F110, you can (need) to enter this variant name in printout/data medium tab next to RFFOAVIS line under variant. Then you won't get this error.
Hope this will help you.
Pl. assign points if useful.
Thanks

Syncing & maximum number of devices for one app?

I am setting up five iPads for a small business. They are supposed to be identical -- same Apple ID for all of them, same apps, files, settings, &c. I am still working out some of the syncing and access restriction settings. However the business posed a question to me, and I haven't been able to find an answer online:
If an app is purchased once, on how many devices may it be installed?
That is, if an app is purchased for this business on one iPad, can it be downloaded onto the other iPads without further payment? Is there a maximum number of iPads onto which an app can be installed, with additional devices incurring extra fees? Would this number vary by app, and if so, is there a way to find out the maximum before purchasing and installing the app?

http://support.apple.com/kb/ht4627

Cloud isn't showing the same number of apps on different computers

I have two computers. A Windows 7 64-bit desktop and Windows XP 32-bit laptop. After logging into Adobe Creative on my desktop and laptop I see different numbers of apps. On my desktop I have access to a wide assortment of apps (screenshot: http://i.imgur.com/IoFsVY7.png ). On my laptop I have access to a fewer number of apps (screenshot: http://i.imgur.com/5CAegdD.png ). The app I am trying to install on my Laptop is Creative Cloud Connection. While this app is available on my desktop, it is not appearing on my laptop. I am using the same Creative Cloud account on both computers. Can someone help me with this?

The system requirements for the various apps in the Cloud vary and the apps available for download depend on your hardware and operating system.
Well-spec'd 64 bit systems (Windows and Mac) will run all apps. Other configurations vary by app.
Some Cloud apps (Premiere Pro, After Effects, Encore and SpeedGrade) are 64 bit only. They will not install or run on 32 bit computers so they will not appear on a 32 bit system as available for download.
http://www.adobe.com/products/creativecloud/tech-specs.html#requirements
Other apps such as Lightroom and Cloud Connection will not install or run on Windows XP so they will not appear as available for download.
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-connection-faq.html#id_34776

I have crappy internet service... Can touch apps transfer files without creative cloud?

I live and work mostly from home which is in a rural area with crappy Internet service. I have a capped plan. All I'm looking to do is present to clients and do on the fly mockups. I don't need the cloud. Will it transfer sans cloud, the old fashioned way, with a cable?

Hey creatorzkid,
I wasn't sure how you typically present to clients, in person, from a tablet, or from your home computer etc. The touch apps do have options for saving locally to the tablet itself (native tablet Photo Gallery) or sending a project via email. The options vary from app to app also. The Creative Cloud is the best way if you are planning on starting on the tablet and finishing on the desktop though. Some of the Adobe desktop programs (Photoshop CS5 or Illustrator CS5, etc.) have a plug-ins which allow you to import the tablet files directly into them for continued editing, something like this
http://forums.adobe.com/docs/DOC-1336
The non-Creative Cloud workflows are designed around transferring the files in a more universal viewable format for sending or viewing by others, namely Jpeg.
Hope that helps,
-Dave

Unoffical FAQ ~ your question may be answered here

I have been helping people out with ADE for over a year now, and am now stopping being a regular contributer.
I copy below all the 'stock' answers I had for various situations.
Most of these should no longer be relevant as they should have been fixed long ago.
However, the recent release of ADE3.0 show that this is far from being the case.
These should all be in the official Adobe FAQ, but meanwhile here they are in a fairly random order with a very course index.
Not sure how to make internal links, so search for the keyword with ~~~
kobo~~~ desparate measures when a Kobo won't play ball with ADE
windows~~~ windows registration goes wrong so ADE is not automatically opened for .acsm/.epub (worse, reader is, and then refuses to read)
account~~~ spiel about how adobe accounts, email addresses and DRM books interact ~~ you get a wrong user message
Overdrive~~~ problems authorizing overdrive app on tablet
findaccount~~~~ how to find the account you are authorized with
bookaccount~~~ how to find the account a book is authorized with
nonauthorized~~~~ the problems of downloading a book while not explicitly authorized
confused~~~ sometimes ADE pretends to be registered when it isn't really
hacking~~~ extreme measures when authorization doesn't behave
differentdirectory~~~ how to use a different directory to save your ADE books
tablets~~~ ADE cannot see a tablet device, and use on Windows RT
bugs~~~ ADE2.0 is riddled with bugs (?is 3.0 any better). Here are some know bugs
alternatives~~~ ADE2.0 is riddled with bugs (?is 3.0 any better). Some alternatives
nomoredevices~~~ you have used up all your activations, so can't authorize new device
kobo~~~~~~~~~~~~~~~~~~~~~~~~~~
possible help with Kobo issues … I haven’t tried this
from post 23 in http://forums.adobe.com/thread/1124380?tstart=0 by Shirltaylor, Jul 26, 2013
Yes it was extremely frustrating process to read any library books after the upgrade to Adobe Digital Editions 2.0.
Eventually it turned out that the process must have you sign out of the Kobo device Account under settings on the Kobo Device.
What we did was to remove all library books from the Kobo device and from the Adobe Digital Edition
Next was to sign out of the Kobo Device as well as the Kobo Desktop on the PC as well as exiting from Adobe Digital Edition.
Next was to start up Kobo Desktop and sign in.
Next was to connect the Kobo device to the USB port.
This resulted in the Kobo device being upgraded and Sync'd to the Kobo Desktop. Wait until the Sync is complete
Disconnect the Kobo device from the USB port
Next was to restart Adobe Digital Edition and using CTRL-SHIFT-D to deauthorize the computer and select Erase Authorization.
Next was to go back to Adobe Digital Edition, Help and Authorize Computer
Next was to reconnect the Kobo device to the USB port
Next was to select the Kobo device in the Adobe Digial Edition and Authorize the device
Next was to get a library book in the Adobe Digital Edition and then add it to the Kobo Device
Everything seems to be working from then on.
Have fun reading again
windows~~~~~~~~~~~~~~~~~~~
Sometimes the registration of ADE to Windows as the default hander for .acsm and .epub files does not work;
that is what causes the double-click in Explorer to fail; and usually prevents opening from the browser as well.
especially in Windows 8/8.1, and maybe 7;
this appears to be a bug in Windows (for once not a bug in ADE).
Two possible ways round it.
First, try to force it in Explorer
Right-click on a .epub file (and repeat entire sequence for .acsm if necessary)
Select 'open with' if on the list, 'open' if not.
Select 'choose default program'
Select ADE if it is on the list,
If not select 'more options' and select ADE is on that list.
If not, at the bottom of 'More Options' list is 'Look for another app on this PC', select that
and navigate to the ADE executable (may be at C:\Program Files\Adobe\Adobe Digital Editions\digitaleditions.exe)
Now .epub/.acsm files should be associated with ADE, and double-clicking should work.
Sometimes, Windows allows you to go through all that, but then refuses to make the association you have asked for.
In that case, the only way I know is to use a third party file association program.
http://www.softpedia.com/get/System/System-Miscellaneous/Types.shtml works for me.
account~~~~~~~~~~~~~~~~
Adobe DRM books are associated with an Adobe account; once accessed on a device registered to a given account they can't be used on a device registered to any other account.
You must regain access to your old account and register your computer and other devices with it.
You should not create a new account if you want to keep your old books.
Each account has a permanent internal ID, and is at any one time associated with an external email ID.
The email does not need to be valid, (though it can only be verified if it is valid).
For example, if you lose an email address for some reason or another, it doesn't mean that address is no longer associated with the Adobe account.
The correct thing to do when you change email address is to associate the new email address with the old Adobe account.
Login to the Adobe account using the old (now invalid) email address and old Adobe password.
You can then goto Adobe ID/My Adobe ID and change the email address/external ID associated with the account.
If you have already made a new Adobe account using your new email and registered computers and devices with it, you must ... ... ...
Change the email address associated to your new Adobe account. Until you have done this you can't do step 3.
Many email providers allow variant addresses, such as [email protected] and [email protected]
Those will be the same as far as google is concerned but different as far as Adobe is concerned.
You can now abandon the new Adobe account
Change the email address associated to your old Adobe account to your new email address.
Deregister your computer from the new (now dead) Adobe account, using ctrl-shift-D (cmd-shift-D if on a Mac)
Deregister any ereader devices registered with the account, using ctrl-shift-E (cmd-shift-E if on a Mac) to ADE with the device plugged in
Reregister the computer with the old Adobe account, using the new email address with which you associated it in step 3
(menu/Help/Authorize Computer, Library/Authorize Computer on the older more reliable v1.2.7)
Reregister any ereaders
(menu/Help/Authorize Device, Library/Authorize Device on v1.2.7)
findaccount~~~~~~~~~~~~~~~~
A book is associated with the AdobeID in use at the time the book was downloaded (.acsm token file turned into encrypted .epub/.pdf file).
An AdobeID has two forms, internal (something like 'urn:uuid:ff2ddc22-eca0-46c6-a84d-xxxxxxxxxxxx') and external (email address).
The authorization mechanism on the book is associated with the internal ID.
The internal ID for an account never changes; you can change the email address it is currently associated with on the Adobe website.
You can check the Adobe ID ADE is using in internal and external form in ADE2.0 using ctrl-shift-I (Help/Authorization Information).
For ADE1.7.2 you sadly only get the external ID, using Library/Authorize Computer (which acts as a query if already authorized).
You can check the AdobeID in external form in Bluefire.
In either case, if you have changed the external ID associated with the account since authorizing the device,
you may be told the old external ID, or may be told the up to date one.
You can check the AdobeID associated with a book in internal form with the rather roundabout method at the bottom of this post.
I don't know of any way of finding the current external ID given the internal ID of the book;
unless it is an ID you still use in which case the matching values from ADE2.0 will tell you.
bookaccount~~~~~
OK. To find the internal AdobeID.
open a sample DRM .epub file as a .zip file.
With some zip programs, you can just open the .epub as an archive (ev, with 7zip),
with others you will have to rename the .epub file to a .zip file first, then open it.
find the file 'rights.xml' within the zip. Probably 'META-INF\rights.xml'
open the rights.xml file
inside you will find a section '<user>' that looks something like
<user>urn:uuid:ff2ddc22-eca0-46c6-a84d-xxxxxxxxxxxx</user>
That string is the internal version for your AdobeID.
That stays fixed for the AdobeID, even if you change the associated email (or password),
that internal ID is what is really associated with the book.
(n.b. there is no point in trying to change the urn to a current one you might find and recreating the .epub file; the DRM is cleverer than that).
You can now contact Adobe at Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html
It may be that if you can give them that internal ID they will be able to get you access to your account again.
If they say they can't, it might be worth trying two or three times at intervals;
it seems from what others have said that some of the representatives are very clued up, but others are not.
(I've never used the Live Chat).
If you do go through all that, let us know how you got on.
Overdrive~~~~~~~~~~~~~~~~
Sometimes Overdrive has issues with authorization (I have seen from other posts, not experienced).
Try the Bluefire app and see if that will authorize.
If it does, you can use it instead of Overdrive to read Adobe DRM books such as library books; but can’t use it to borrow them.
Also... Even though registration is done via the app, it applies to the device rather than the specific app. It may be that registering Bluefire causes Overdrive to start working, but I’ve never seen that confirmed.
nonauthorized~~~~~~~~~~~
This is a vicious trap that Adobe lays for unsuspecting customers.
They do give very mild warnings, but not nearly strong enough.
When you register 'without ID', ADE creates an anonymous/implicit ID with limited powers (eg can't be used to share with other devices).
Whenever you first load a DRM book, that copy of the book is associated with whatever ID the computer is registered to at the time.
Any book you load while this anonymous ID is active gets associated with that ID, and can't be read on any other device.
When you properly register your computer with a real ID, that old anonymous ID is lost.
Now you don't have any devices that can read the book.
The only way I know round this is to use a DRM stripper such as epubee BEFORE you deauthorize the device.
I do NOT advocate using such code to get around the valid limitations placed on a DRM book.
However, where the problem arises only because of the ineptness of Adobe's ADEPT DRM infrastructure and its implementation,
such a measure is totally justifiable.
confused~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help, and indeed installation can even trigger this state.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
Another is "E_AUTH_NOT_READY"
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
hacking~~~
Useful information about registration, uuid etc: ( http://www.jiagouyan9.com/archives/tag/6040/)
http://forums.adobe.com/thread/905348?start=0&tstart=0
registry [at HKEY_CURRENT_USER\Software\Adobe\Adept\Activation\0000\0000\\value etc]
differentdirectory~~~
There's no way to do it from Digital Editions itself.
You can do it by making directory junction (on PC, and I'm sure Mac has something similar).
Move the directory and any files you already have from .../My Documents/My Digital Editions to wherever you want them.
Open a command prompt
Navigate to .../My Documents.
Type mklink /d "My Digital Editions" "wherever you put the directory"
The new directory does not even need to be on the same drive.
tablets~~~~~~~
Adobe Digital Editions does not generally recognize tablets, only dedicated ereaders.
For a tablet, install compatible Adobe DRM ereader app. I suggest Bluefire; also consider Akdiko or Overdrive but some people have issues registering them. Some tablets come with such an app preinstalled. Authorize the tablet from within the app to use your Adobe ID (details vary from app to app, usually somewhere within Settings)
The tablet may well be able to download books without use of ADE at all. If you do want to transfer books from ADE/computer, use a file manager (Windows Explorer, Mac Finder) to copy to the tablet as mounted drive, or use a utility such as Dropbox.
Very limited choice on Windows RT tablets, try DReader or DL Reader
DL Reader app for Windows RT http://apps.microsoft.com/windows/en-gb/app/dl-reader/0be254fa-1323-4bda-92fa-698fe502456c
~~~~~~~~~
bugs~~~
ADE2.0 is riddled with bugs (?is 3.0 any better). Here are some known ones (that have been around for years)
Bugs caried over to ADE3.0,
no easy option to reauthorize (design bug)
Authorize Computer should not be greyed out when authorized:
it should give a warning 'Do you want to deauthorize first? You will lose access to the books belonging to the old account/ID
and then if you acccept deauthorize and allow you to reauthorize.
hidden deauthorization (design bug)
won't work with library books and (some?) Sony ereaders (see separate post) (code bug) (1.7.2 resolves)
I can't check whether it also still has some of the other standard issues with ADE2.0 that regularly show up on this forum
Insufficient warning of the bad effects of implicit authorization
Prone to not working immediately after install, especially on XP (1.7.2 resolves)
Prone to suddenly stopping working after a time even when it worked before (1.7.2 resolves)
Prone to failure to scroll pages. (1.7.2 resolves)
Incomprehensible error messages. (1.7.2 not quite so bad)
Prone to confused registration, pretending to be registered when it isn't
Incorrect error messages, in particular
ID is already in use on another computer and cannot be reused.
as a message further to confuse users already hit by bug 6.
alternatives~~~~~~
For DRM free ebooks, use the free and vastly superior Calibre. http://calibre-ebook.com/
For DRM ebooks, you can use Sony Reader; free download from Sony intended to run with Sony eReaders but works quite happily without. I prefer ADE1.7.2 to Sony Reader. https://ebookstore.sony.com/download/
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.
nomoredevices~~~
Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html,
or as a slight short cut try http://helpx.adobe.com/contact.html?product=digital-editions&topic=using-my-product-or-ser vice
Choose topic ‘'Signing into my Account' , and then click on 'I still need help';
then you should see 'Chat with an Agent' at the bottom of the page.
Depending on screen resolution, you may need to scroll down a bit to see the Chat with an Agent' bit, just under 'Ask our Experts'.
'Ask our experts' will indeed just lead you back to this forum.
Sometimes you will get ‘Sorry! All agents are busy— please check back soon.’
Don’t refresh the page, just hang on and it should eventually go to ‘Chat Now, and agent is available’.
They can reset your authorizations, and then you must reauthorize any devices you still need.
(Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations (E_ACT_TOO_MANY_ACTIVATIONS) . Thanks to AJP_Bear for that tip.
~
~~~

Do you have any tips out suggestions for when ADE can't download the epub book from an ACSM file? The problem seems to be related to something blocking the process, but no one has a clue as to the source of the problem. See my post fot more information:
http://forums.adobe.com/message/6179746#6179746
Thank you for any suggestions you are able to offer.

How to call an EJB from another EJB

Hi
I have a problem here. I need to execute a second EJB which has to get the input from the first EJB as data for execution. So when I call the first EJB, the first EJB should give the data to the second EJB and execute it and provide the result.
Cheers,
Raj

ok.. Here it goes.. I am writing a sample code..
public class EJB1LogBean implements SessionBean {
// test is a method of stateless session beam
public void test ( TestVal val )
throws RemoteException{
try {
EJB2LogHome ejb2Home= (EJB2LogHome)getHome("java:comp/env/ejb/EJB2LogHome",1);
EJB2Log ejb2Log = ejb2LogHome.create ( val );
} catch ( CreateException e ) {
     System.out.println("Create Exception occurred ");
     e.printStackTrace();
     } catch ( RemoteException e ) {
     System.out.println( "RemoteException Occured");
e.printStackTrace();
     throw new RemoteException () ;
     } catch(Exception ee) {
ee.printStackTrace();
private EJBHome getHome(String jndiName,int type) {
try {
Context context = new InitialContext();
Object ref = context.lookup( jndiName );
switch(type)
case 1:
EJB2LogHome ejb2LogHome = ( EJB2LogHome )
PortableRemoteObject.narrow( ref, EJB2LogHome.class );
return ejb2LogHome;
} catch ( Exception e ) {
e.printStackTrace();
return null;
}//EJB1LogBean ends
Here as you can see, EJB1LogBean(session bean) is calling a second EJB, EJB2LogBean (entity bean). TestVal is a sample value object passed. It is plain java class and can vary from app to app and it has got nothing to do with ejbs.
"java:comp/env/ejb" is a J2EE standard and while getting a home interface, you have to append the home interface class name to "java:comp/env/ejb". Here I am passing "java:comp/env/ejb/EJB2LogHome" and "1" to getHome method, whose job is to get a reference to a home interface. getHome method is a local method. "1" is passed just to give a flexibility to getHome method as you can have more ejbs to invoked. In that case, you can go on adding different case statements for 2, 3 etc.
The only thing you have to keep in mind is that your deployment descriptor for EJB1LogBean will contain the entires for both the beans i.e. for EJB1LogBean and EJB2LogBean. This is because EJB2LogBean is wrapped by EJB1LogBean.
Hope this helps.
Please let me know if you need anything more.
- Amit

License Consumption in BOE XI

Post Author: neheyen
CA Forum: Authentication
I don't know if we don't have enough licenses or if there is something misconfigured. Or if there is a problem with usage.
When I go to the CMS properties, I think I see who is logged in at the moment. Just what is the Session Count? The number of sessions the user has open (InfoView, Instance Manager, CMC, etc.) or the number of licenses used?
Is there a whitepaper that describe the license model?
And finally is there a setting for timeouts? I think what happens is that users just close the browser window instead of actually using the padlock icon to log out. Would this result in a 'stranded' login that consumes a license?
Thanks for any insight or hints!
Norman

Post Author: TAZ
CA Forum: Authentication
Hi Norman,
I think both these questions would be better served in the deployment forum going forward...
As for licenses it depends on your license type, CPU license wouldn't matter, concurrent would only be the user count not session, named would be the session count=licenses used.
There are timeouts for when a session is inactive but they vary per app server. You should be able to find them in KB's or open a case with support if that doesn't work so they can give you the right info based on your environment.
In IE 6 the default setting prompted for logoff even when closing the browser. IE7 I don't believe honors this setting. If this is an earlier version than XIR2 there were other issues that caused extra sessions.
Regards,
Tim

How to make context menu in Windows 10 application?

How to make context menu like this? With touch friendly and DPI per monitor awareness. Also considered WPF variant.

Hybrid app? Do you mean Universal app? Please explain what you're trying to make.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

My Nook will not accept Adobe password. How can I fix?

I have changed passwords several times and each time I get a automated response from Nook which reads "User Not Identified". What am I doing wrong?

Nook HD should work using Bluefire or similar app.
~~~
Adobe Digital Editions does not generally recognize tablets, only dedicated ereaders.
For a tablet, install compatible Adobe DRM ereader app. I suggest Bluefire; also consider Akdiko or Overdrive but some people have issues registering them. Some tablets come with such an app preinstalled. Authorize the tablet from within the app to use your Adobe ID (details vary from app to app, usually somewhere within Settings)
The tablet may well be able to download books without use of ADE at all. If you do want to transfer books from ADE/computer, use a file manager (Windows Explorer, Mac Finder) to copy to the tablet as mounted drive, or use a utility such as Dropbox.

Need help w/ Adobe Digital Edition (ADE) to download to Nexus 7 using Sony eReader

I am wondering if I can download an etextbook on Adobe Digital Edition (ADE) from my labtop to my Nexus 7 using Sony eReader.
I am trying to do this and coming up w/ this problem on my Nexus 7 - Sony eReader currently.
It will not accept Adobe ID under "Adobe ID Confirmation" on Sony eReader.
It also says:
ATTENTION: You need to enter the Adobe ID originally associated with your Reader Store account. Usually, this ID is automatically created.
Do you know will these programs/devices be compatable w/ each other? If not can I use Ipad as a last resort?

You should install an Adobe DRM compatible app on the Nexus 7.
I suggest Bluefire; also consider Akdiko or Overdrive but some people have issues registering them. Some tablets come with such an app preinstalled. Authorize the tablet from within the app to use your Adobe ID (details vary from app to app, usually somewhere within Settings)

HELP!!! How I can call to EJB from another EJB??

I have two EJBs, for each EJB I have a jar, how I can call to EJB jar to another???
I have tried the following, in the first EJB I have import the second EJB jar and call it with context, lookup, PortableRemoteObject etc.. but the instruction lookup not find the second EJB reference.
The name in the lookup instruction is the JNDI name of the second EJB but not find a reference to it.
Please help me!!! Thanks!!
The error is:
javax.naming.NameNotFoundException: Missing node. Root exception is org.omg.CosNaming.NamingContextPackage.NotFound
     at org.omg.CosNaming.NamingContextPackage.NotFoundHelper.read(NotFoundHelper.java:34)
     at org.omg.CosNaming.NamingContextPackage.NotFoundHelper.extract(NotFoundHelper.java:50)
     at org.omg.CosNaming._NamingContextStub.resolve(_NamingContextStub.java:161)
     at com.inprise.j2ee.jndi.java.CorbaContext.resolveName(CorbaContext.java:242)
     at com.inprise.j2ee.jndi.java.CorbaContext.lookup(CorbaContext.java:261)
     at com.inprise.j2ee.jndi.java.javaContext.internal_lookup(javaContext.java:483)
     at com.inprise.j2ee.jndi.java.javaContext.internal_lookup(javaContext.java:493)
     at com.inprise.j2ee.jndi.java.javaContext.internal_lookup(javaContext.java:493)
     at com.inprise.j2ee.jndi.java.javaContext.lookup(javaContext.java:937)
     at com.inprise.j2ee.jndi.java.javaContext.lookup(javaContext.java:942)
     at javax.naming.InitialContext.lookup(InitialContext.java:350)
     at ejbclient.EnterpriseClientBean.addition(EnterpriseClientBean.java:115)
     at ejbclient.EnterpriseClientBean.actionPerformed(EnterpriseClientBean.java:97)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1450)
     at avax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Abstr

ok.. Here it goes.. I am writing a sample code..
public class EJB1LogBean implements SessionBean {
// test is a method of stateless session beam
public void test ( TestVal val )
throws RemoteException{
try {
EJB2LogHome ejb2Home= (EJB2LogHome)getHome("java:comp/env/ejb/EJB2LogHome",1);
EJB2Log ejb2Log = ejb2LogHome.create ( val );
} catch ( CreateException e ) {
     System.out.println("Create Exception occurred ");
     e.printStackTrace();
     } catch ( RemoteException e ) {
     System.out.println( "RemoteException Occured");
e.printStackTrace();
     throw new RemoteException () ;
     } catch(Exception ee) {
ee.printStackTrace();
private EJBHome getHome(String jndiName,int type) {
try {
Context context = new InitialContext();
Object ref = context.lookup( jndiName );
switch(type)
case 1:
EJB2LogHome ejb2LogHome = ( EJB2LogHome )
PortableRemoteObject.narrow( ref, EJB2LogHome.class );
return ejb2LogHome;
} catch ( Exception e ) {
e.printStackTrace();
return null;
}//EJB1LogBean ends
Here as you can see, EJB1LogBean(session bean) is calling a second EJB, EJB2LogBean (entity bean). TestVal is a sample value object passed. It is plain java class and can vary from app to app and it has got nothing to do with ejbs.
"java:comp/env/ejb" is a J2EE standard and while getting a home interface, you have to append the home interface class name to "java:comp/env/ejb". Here I am passing "java:comp/env/ejb/EJB2LogHome" and "1" to getHome method, whose job is to get a reference to a home interface. getHome method is a local method. "1" is passed just to give a flexibility to getHome method as you can have more ejbs to invoked. In that case, you can go on adding different case statements for 2, 3 etc.
The only thing you have to keep in mind is that your deployment descriptor for EJB1LogBean will contain the entires for both the beans i.e. for EJB1LogBean and EJB2LogBean. This is because EJB2LogBean is wrapped by EJB1LogBean.
Hope this helps.
Please let me know if you need anything more.
- Amit

Why do I keep getting " connect to iTunes to get push notifications

Meant I keep getting a central alert box stating Connect to iTunes to use push notifications. One app now doesn't work as this startup alert just loops.

Hi ManxScoobie,
You may need to adjust the settings for your Notifications.
See the article below about how Push Notifications affects cellular data
iOS: About cellular data usage
The iPad User Guide below explains how to change Notification settings on the iPad for all or individual apps (see page 113).
manuals.info.apple.com/en_US/ipad_user_guide.pdf
Do Not Disturb & Notifications
Push notifications appear in Notification Center and alert you to new information, even when the associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and a numbered badge on the app icon on the Home screen.
Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then turn notifications on or off for that item. Apps that have notifications turned off appear in the Not In Notification Center list.
Change how notifications appear: Go to Settings > Notifications. You can:
Change the number of notifications: Choose an item in the In Notification Center list. To set how many notifications of this type appear in Notification Center, tap Show.
Change the alert styles: Choose an item in the In Notification Center list. Choose an alert style, or select None to turn off alerts and banners. Notifications will still appear in Notification Center.
Change the order of notifications: Tap Edit. Drag the notifications into the order you want. To turn off a notification, drag it to the Not In Notification Center list.
Display numbered badges on apps with notifications: Choose an item in the In Notification Center list and turn on Badge App Icon.
Hide alerts from an app when iPad is locked: Choose the app in the In Notification Center list, then turn off “View in Lock Screen.”
Some apps have additional options. For example, Messages lets you specify whether to include message previews in the notification, or whether to display iMessage notifications only from senders who are in Contacts.
I hope this information helps ....
- Judy

HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

Do Not Disturb and Notifications
Push notifications appear in Notification Center and alert you to new information, even when the
associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
a numbered badge on the app icon on the Home screen.
Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
following options in Settings > Notifications > Do Not Disturb:
• Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
• Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
from your Favorites list or other Contacts groups you define. For information about Favorites,
see Chapter 25, Contacts, on page 100.
• Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
their Caller ID) calls you twice within three minutes, iPhone will ring.
Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

Button options

Maybe this is a quick one...
Is there a way of moving between button options using the keyboard? As an example, when using Adobe Bridge, if I select files I can navigate through them using my keyboard. If I hit Delete I get a panel offering me 3 options. (I know I can Cmd + Delete in Bridge but this is an example.)

Go to System Preferences >> Keyboard and Mouse >> Full keyboard access >> Choose "tab to move keyboard focus >> All controls.
You can now move between button options but some items vary from app to app. You can always choose the default then press return. Most apps will cancel or not save using the space bar. Some will not. You'll have to play around until you know, or wait for someone with better instructions.
-mj

Variant in app

Similar Messages

Maybe you are looking for