Variant of expect command having similar functionality in Solaris OS??

Hi All,
I am using one shell script in Linux with expect 5.38 command utility, this script contain ssh and sftp. Now same shell script I need to use in Solaris (SunOS eupr0016 5.9 Generic_118558-05 sun4u sparc SUNW,Sun-Fire-V440) but issue is that the Solaris OS doesnt have expect utility.
Please let me know, is there any other variant of expect command/utility having similar functionality to use on Solaris OS.
Thanks
Jiten Mistry

JitenMistry wrote:
But we have Solaris 5.9 OS installed5.9 and 9 are the same version of solaris (actually I think it is SunOS 5.9 and Solaris 9, but whatever). So my advice is to install the package SFWexpct that should be on the companion CD.

Similar Messages

After upgrading to the latest ios my imessage and facetime apps do not function.....any one having similar difficulties?

After upgrading to the latest ios my imessage and facetime apps do not function.....any one having similar difficulties?

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?

Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?

No, I'm afraid not. However, you can drop a clip from in to out into the timeline and the hit CMD+R and grab the end, changing the length of the clip to fit in the space that you need by speeding up the clip.
Hope that helps.
Andy

T codes with similar functions in AP and AR process

Hi,
I need list of T codes which has similar functions in entire AP and AR process.
Thanks
SM

Hi,
From the menu Extras > Settings > Tick "Show Technical Names".
The look through the standard menu for AP & AR . Items with similar descriptions = Similar T-Code.
regards

Charged a large amount $68 by iTunes California . I can't get to anyone in support and when I challenged the amount on my card, now my Apple ID has been disabled. Anyone else having similar problems?

Charged a large amount $68 by iTunes California . I can't get to anyone in support and when I challenged the amount on my card, now my Apple ID has been disabled. Anyone else having similar problems?

Does anything show on your account's purchase history ? If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
If it does and you didn't do the purchase(s), and nobody else has access to your account or devices, then try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption. Is that how you tried contacting them ?
If it doesn't show on your account then contact your card issuer.
For your account being disabled have you tried getting it re-enabled ? If it's been disabled due to payments then you may need to contact support to get it enabled

I don't use Photoshop - looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting. Any suggestions?

I don't use Photoshop, I'm an Aperture guy.
I'm looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting.
I'm especially interested in the bending of the pixels, along the lines of impressionist paintings - think van Gogh.
Any suggestions?

If you are interested in computer simulated drawing and painting effects, have a look at the "ToonIt!" plug-in for Aperture. This will do some of the basic work for you, but you will have to do quite a lot of editing afterwards, to turn the image into a piece of art.
It might be easier, to do most of the drwing and painting yourself in the first place - ArtRage Deluxe is very versatile, if you have a large trackpad and pen.
For example: Applying a light ToonIt! effect "Impressionist2": The diagonal
cross-pattern is due to "Demo" mode - I have not yet bought the plug-in - it is rather expensive:
The original:

Similar Functionality as VF31 or VL71 for Sales Orders

Hi Experts,
VF31 and VL71 is for mass processing of outputs for Delivery & Billing documents. Is there similar functionality for sales orders?
Regards
Lawrence

Hi Lawrence,
There is no tcode, but you can mass process outputs for sales orders using the program SD70AV1A

Any issue if we writing DML,DDL and TCL commands in stored functions.

Hi,
Is there any issue if we writing DML,DDL and TCL commands in stored function with help of PRAGMA AUTONOMOUS_TRANSACTION.

Hi,
Yes, Ofcourse. Using DML Statements Inside the function using PRAGMA AUTONOMOUS_TRANSACTION is not highly
recommended. It is recommended to use AUTONOMOUS TRANSACTION for error logging purposes only, and
when used in an disorganized way it may lead to dead locks and we will have problem when examining the
Trace Files.
Thanks,
Shankar

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Functionality like SM30

Hi,
I created a Z-Table. I don't want to generate Table maintenance. In Production System the Users don't have access to SM30 for insert/delete/modify the records in the table.
Is there any other way to give some program to the users for similar functionality like SM30?
anybody written any program on this issue?
any idea?
Thanks in advance,
fractal

Hi Fractal,
Follow these steps:
1. Goto T-code (se93) and create a custom trasaction say ztest.
2. while creating give some short test and check the radio button
<b>Transaction with parameters(parameter transaction)</b>
3.In the next screen assign these values:
   Transaction --> SM30
   Screen --> Give the screen number which is seen in the table maintenence
                    screen in system--> status which you can directly go and find
                    through the T-code sm30.
   And in the Name of the Screen field as VIEWNAME and Value as the name of
   your Custom Table.
Now you can provide this T-Code for users to maintain the table.
Regards,
Vinod.
NOTE: PLZ close the issue if solved.

Help with Expect command to change config on hundreds of ASA's.

Hi All,
I'm looking for some help with the Expect command to automate some tasks, I'm certainly no programmer but I am struggling, here is an example of my script.
#!/usr/bin/expect -f
# This simple Expect script will add a new Syslog destination in
# Cisco switches (IOS based)
# We assume here that all switches uses the same credentials
# for the administrative tasks
# Define variables
set password "site1"
set enablepassword "site1"
# Define all the switches to be reconfigured (separated by spaces)
set switches "site1 site2 site3"
# Main loop
foreach switch $switches {
        puts "Processing switch: $switch";
        # Open the telnet session:
        spawn telnet $switch
        # Perform authentication
        expect "Password:"
        send "$password\r"
        expect ">"
        # Switch to enable mode
        send "en\r"
        expect "Password:"
        send "$enablepassword\r"
        expect "#"
        # Enable configuration mode (terminal)
        send "conf t\r"
        expect "#"
        # Modify VLAN1
        send "interface vlan1\r"
        expect "#"
     # Change VLAN1 Description to Uppercase
        send "description INSIDE\r"
        expect "#"
        send "exit\r"
        expect "#"
        # Save config to NVRAM
        send "wr\r"
        expect "#"
        #Logging out
        send "exit\r"
        expect eof
In the example this works fine for SITE1 passing the credentials SITE1 as the default password and SITE1 as the enable password. I need to do usernames and passwords that are different for each site. I have to make some changes across hundreds of ASA's to terminating tunnels to a new location. Can anyone help out in how to do this, I know I am close I just need it to read, siteA, username, both passwords from a text file, etc
Greg

Hello,
try to modify this example to your needs ->
http://www.bitpapers.com/2012/04/cisco-changing-configurations-of-many.html
Best Regards
Please rate all helpful posts and close solved questions

My partner updated to IOS 5 last night on his iPhone 4 and can no longer pick up any wifi signal and phone signal is dire in areas where he had no problem before... anyone having similar issues??

After updating to IOS 5 on an iPhone 4 can no longer get wifi in my home and phone signal is terrible and drops out taking up to 10 mins to re-appear... anyone else having these sort of problems??

I am having similar problems on my new iPhone 4S
My mac gets good wifi connection in the same location. I measured the signal strength -- something like -77db signal vs. -90db noise.
But my iPhone WiFi keeps cutting in and out. In fact, I left my phone on last night to update various apps over WiFi. When I checked it this a.m. I had received several warning messages from AT&T that I was nearing my 3G data limit. I looked at my phone and it had consumed nearly 100mb of cellular data overnight, when it should have been connected over WiFi.
Needless to say, it's taken some of the thrill away from my new iPhone...

I upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues

i upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues?

From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps!

Echo command(or similar) in RMAN Prompt

Hi Friends,
How do i use echo command (or similar) in RMAN . I have a batch file for daily RMAN backup and i have 2(or) 3 set of RMAN commands inside the batch file and the batch file output is stored in a log file
I would like to give some comments before execution of the RMAN commands so that my RMAN log will look better.
Regards,
DB

How do i use echo command (or similar) in RMAN . I have a batch file for daily RMAN backup and i have 2(or) 3 set of RMAN commands inside the batch file and the batch file output is stored in a log fileYou can use 'echo' with 'host' command:
host "echo Starting backup";

Variant of expect command having similar functionality in Solaris OS??

Similar Messages

Maybe you are looking for