Variants created by user ID

Is there any transaction to find out variants created by user ID or
How to find out variants created by specific user ID?
It is very difficult to visit each job & check variant.
*It's very very uregent*
Regards,
Chetan

Hi Chetan,
Check the table VARID.
Regards,
Siva.

Similar Messages

How to change protected variants created by users that no longer exist

There are several older variants for which background jobs are scheduled for daily prcessing. These variants were created and protected by uses that no longer exist in SAP.
How to unprotect and change these variants to reflect new requirements.

Hi Anam
1. Execute tcode VARCH and enter the program and variant name and make the changes, if the system allows you to do so.
2. Check with the basis/security team if they can extend the validity and reset the password for the old ids.
3. If the above doesnt work, you will need to copy the variants manually
Moving forward, when you create/change jobs, request the basis/security team to create common ids like OTCADM, P2PADM, etc. Ensure that all the variants and jobs are created/changed using this common id. Basis/Security team can controll by opening and closing the ADM account on request from project team and the usage can be recorded for tracking.
To check the jobs that use a known variant, use tables TBTCP, TBTCO.
Best Regards
Sathees Gopalan

Change Variant Created by Another User

Hi,
Is there a way to make changes to a variant created by user ID other than yourself? I want to modify an existing variant that was created by a user ID that is no longer with the company. I don't want to use the user ID that created the variant.
Thanks,
Wes

Yes it does the job, but please take note of the warnings in my above post because RSVARENT will not warn you if you do not use (and protect it) carefully.
If you do not maintain the input parameters for exactly that which you want, it will do more than you intended.... and by default it cannot be excluded that anyone can run it to the selection screen.
The Rolls-Royce approach is to use the S_PROGRAM authorization group to protect the variants of the reports via field p_action = 'VARIANT' to a group of users authorized to maintain them (via transaction VARCH) and therefore also schedule them or change programs scheduled with those variants. The developer can in special cases also determine that the report is submitted in the background only via the parameters set by the variant, without a user being able to influence the selection screen in the foreground.
Take care,
Julius
Edited by: Julius Bussche on Nov 26, 2008 12:50 AM

Assignment of Transaction variant to some users only

Hi,
I have created one transaction variant for T.code:MM02. With this some fields were made display mode. I want assign this Transaction variant to few of the users only not all users. That is for others the above are changeble.
So I want to know how to assign this transaction variant to respective users only. If I activate this as standard variant, it is applicable to all. But I want to assign to few only.
Reagrds.
Veerappa
Edited by: Chinna Veerappa on Oct 17, 2008 7:03 AM

Hi,
I tried this before posting the above. When I assigned some users, it is reflecting all users (Irrespective of users assignment, if I activated).
Regards,
Veerappa

Migrate all variant of old user id to new user id

I am working on Single sign on project. I need to change all user id to match with a network id. That is no problem. However, I need to be able to bring along all variant for old user id to the new id. Do you know is there a Bapi or a way to do that? I know I can have user login as old id and create a copy of the variant but that will be a lot of work for user and they may complain. I donu2019t want users to do anything except change their id. All the process should be invisible to users.
Is there a way to do this? If so, please let me know.
Thanks,

Hello,
I face the same problem as you. What did you finally do ?
Have you got a solution ?
Thanks for your reply.
Vanessa Roulier

Set Transaction Variant to specific user

Hi all,
Is it possible to set a defined Transaction Variant (SHD0) to a specific user or to a user group?
I want only some users run a transaction thought the variant, and other users run thought standard transaction.
Thanks and Regards in advance.
Urtzi

Hi Subramanian,
Do you mean that if I create a transacation variant i.e.: for the transaction AS01 called U_USERNAME would be specific for my user?
Is tha t correct?
Thanks

Copying user specific reporting variants to other users

Hi,
Does anyone have experience in copying user saved variants to other users?
We'd like to create a few complex variants for reporting and then distribute them to all of our users.
Thanks!
-Miikka
Edited by: Miikka Åkerman on Nov 18, 2009 2:40 PM

Hi,
In reports input Screen you have this option,
In selection screen you can find, Save as a New varient, give some name and save , don't select Save as User Varient and save it.
Note: Check with the select Save as User Varient & Use as default Varient options.
Thanks
Reddy

IH01 default screen variant for all users

Hi,
I want location hierarchy, equipment installed and BOM explosion checked in the transaction IH01 for all users. I can do this through a screen variant but the user will have to choose it every time he enters this transaction. Is there a way that the above fields default as checked everything a user enters the t-code? I looked for it in SPRO and could not find it. Any help would be greatly appreciated. Thanks
Ajay

hi
if the variant you have created is the only one available then it will display to all the user,but the if some other variant is there with user name then it will be displayed for the user logged on .
only thing is don't authorize the user to create the variant
from SAP help:
Each user can also create their own selection screen. The selection screen defined by you is only then proposed by the system, if no individual selection screen has been defined for the user under their user name.
If you want to define an individual selection screen for each user, and the user-specific selection screen should be proposed automatically when the report is called up, the name of the report variant must begin with U_USERNAME.
Maintenance of selection variants
When you execute the function, you reach the initial screen with all the selection fields. There you can define the standard selection screen. This selection screen is then always proposed if no individual selection screen has been defined for the user under the name U_USERNAME.
regards
thyagarajan

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Error WHile creating a User in Hyperion Planning

HI,
Please someone guide since im facing this problem for a longtime.
I created a user in Planning webpage and refreshed the security filters.
When i tried to login using planning webinterface, it showed an error "User priscila_monsanto does not exist in the domain or the password is incorrect"
And i could able to find an exception in the file"Hyperion Planning-err.log" present in Jrun path of the planning server.
And when i logged into the admin console for the plannng cube, i found user anme in the security-->users field and there is no filters assigned to the user.
Please help me.
Thanks,
Prabhu MSL

at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADDUSERTOADGROUP.implementation(adpADDUSERTOADGROUP.java:49)
This is definitely a Custom Adapter because OOTB Adapter name is adpADCSADDUSERTOGROUP and NOT adpADDUSERTOADGROUP
So, it is your custom code and in the code you are passing incorrect value of the Active Directory Child process form...
The correct name is UD_ADUSRC and the Group Name column name is UD_ADUSRC_GROUPNAME.
While you are passing UD_AD_CHILD as the child process form and UD_AD_CHILD_GRP_NAME as Group Name column name..
Use OOTB Adapter... Correct these discrepancies... Your addition of group will work
And since you are creating custom adapter, you need to be more careful and remain consistent throughout..
Then if you want to use UD_AD_CHILD_GRP_NAME, use it everywhere consistently... Pass only this value in the adapter...
And even in lookups, if any... Search everywhere... Keep things consistent... They will work... Because good news is that you are able to create user in AD via Java Code...
And if any post is even slightly helpful, it is a good habit to mark it with helpful or correct ... And also mark the entire question as answered so that other people also are benefited.

The problem is this: In the phase "Create Java Users"

Hello,
I am installing Solution Manager 4.0 Release 2 (with Red Hat Enterprise Linux Server release 5.1 and Oracle 10 and my java version is: j2sdk1.4.2_14) The problem is this: In the phase "Create Java Users" I get the next error
WARNING 2009-02-13 14:53:22
Execution of the command "/usr/sap/PTS/DVEBMGS00/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install -c sysnr=00 -c ashost=sap-vpmn -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with return code 2. Output:
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)
INFO 2009-02-13 14:53:22
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.
INFO 2009-02-13 14:53:22
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.clone.
ERROR 2009-02-13 14:53:22
CJS-30196
ERROR 2009-02-13 14:53:22
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
Thanks & Regards

Hi,
This problem normally arises with the wrong combination of JDK and OS and for the Linux machines, its better to use IBM Java instead of SUN java
I remember that I have solved this type of problem by using lower version of IBMJava2-AMD64-142-SDK-1.4.2-10.0.x86_64.rpm which is SR10. You can download this version from
http://www.ibm.com/developerworks/java/jdk/linux/download.html
go to download _12 and then just change the sr12 to sr10 in the header url....
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
with the higher versions of java for 64bit systems create serious stack over flow problems.....
what I suggest you is to start reinstallating SolMan after installing IBM java sr10 version...
Regards,
Naveen.

Unable to enable security and create admin user after reset - px4-300d

Our px4-300d became inaccessible a few days ago. I couldn't get to any shares from any machine, and I couldn't get to the admin console. When I checked the unit, there was no indication that anything was wrong (ie - the panel didn't show any failure, I didn't get any emails indicating a failure, and there were no lights offering a clue to what was wrong). However the unit was completely frozen...the buttons on the front would not scroll through the different information on the panel.
I attempted to reset the device using the pinhole on the back, but the device wouldn't respond, so I had to power it down using the button on the front. When I tried to power it back up, it would come on for about one second, then immediately power off. I pulled all 4 drives out and powered it on again without any drives. This time it came up completely and I got a message on the panel that drives were missing. I started putting the drives in one at a time and the device recognized them all and I was able to login to the admin console. However, all the shares were missing and I received an email that the Storage Pool was degraded. I rebooted the device from the admin console and when it came back up, it started reconstruction. After a few hours, it completed, but I still had no shares and couldn't create any new shares. I also did not see any of my users, including the admin account I was logged in with. I tried to create a new user, and also tried creating a user I knew existed and neither one worked. The screen would just flash but nothing would show up. At this point, I decided to try to reset using the pinhole on the back of the device to reset the admin user so I could just create a new one. So, now I'm stuck at the 'Enable Security' screen. Every time I try to create an admin account, it just flashes and returns me to the same 'Enable Security' window.
Now what?
Solved!
Go to Solution.

If you are unable to get into it you will not be able to do the factory reset. You can try booting in buy removing one disk at a time. If you are still unable to then tech support should be able to supply you with the imager and try flashing it. I would keep it at 4.0.8 also,

Error in phase creating java users during installation!!

Hi,
We are getting error at step "Creating java Users" while installing NW 2004s SR1 non unicode dual stack on HP Ux Pa Risc 64 bit with database Oracle 10g.
Erro logs of file /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/sapinst_dev.log are as:
==================================================================================================
ERROR      2011-07-21 13:20:37
           CJSlibModule::writeError_impl()
CJS-30197 . For more details see output of logfile:
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2011-07-21 13:20:37 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
=================================================================================================
Also please note that we have already 1 instance (dual stack) on same host and that is running fine.
Could someone please assist us in proceeding further.
Regards
Joy Garg

Hi,
Issue gets resolved by extracting manualy from JAVA_DVD_DIR/J2EE_OSINDEP/J2EEINSTALL.SAR to SAPINST install directory using SAPCAR. The path of this install directory is:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install as:
> pwd
/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install
> SAPCAR -xvf /SW/NW_2004s_SR1Java_based_SW_Comp/J2EE_OSINDEP/J2EE-INST/J2EEINSTALL.SAR
Once we have extracted the J2EEINSTALL.SAR relaunch SAPINST again and the installation continue.
Regards
Joy garg
Once you will have extracted the J2EEINSTALL.SAR please launch SAPINST again and the installation will continue.

How to create a user in J2ee UME, if LDAP configured?

Hi SAP Gurus,
I have a question for my J2EE engine. We configured LDAP for user storage, so that our User can use there normal LDAP user ID. Now I want to create an administrative user like J2EE_ADMIN or Administrator, these are standard users and present in the UME of the J2EE engine since the installation of my portal.
But when I go to the user admin and want to create this new admin user, I got an error message, that Im not able to create it.
I also try to create the user via the Visual Admin and the J2EE Useradmin.
So my question is, how can create this new user in the UME and NOT in the LDAP???
Thanks.

Hi Marcel Haberland ,
If your idea is to have single Sign on , I would say the process is to create the user in LDAP itself that will be the single point of entry , Since the UME is configured and connected to LDAP normally with read permission your best bet will be to create the user in LDAP.
SSO with is configured to all your backend syst ( trusts needs to be configured between Java/Portal to all your backend systems by Basis team), also the ids needs to exist in all the backends.
Now to come back to your question:
If you can login to UME of portal/Java , and create the user do not expect it to appear on your LDAP
mainly because LDAP will never be configured in a Enterprise project as bidirectional ( ie Read/Write ), it will be readonly.
Also if the Basis/Portal team allow you the option to create the user in UME , they will have to restart the machine everytime you need to point to a different data source , but I dont know if this is the case in EHP4 versions, because SAP claims with EHP4 downtimes are almost nullified.
Edited by: Franklin Jayasim on Jun 29, 2010 6:59 PM
Edited by: Franklin Jayasim on Jun 29, 2010 7:02 PM

How to create many user in the same database

hi
my question is "How to create many user in the same database(application)?"
for example, i have students, teachers, and staffs user using my application.
i can create many users to use the same application right?, how ^^''' ???
(right now i can only create application and then it shows every data in my DB
but i want it to show only the data for the user who login to that application)
Thanks.
ps. i'm newbie, please help T^T

You need to create a user table within your application that maintains their privileges. If you have LDAP you could use this for authorisation otherwise the table would handle that as well (store passwords etc). Your reports etc would then be filtered on information from this table.
Check out some of the sample applications to see how authorisation and access is implemented (Online store is one). The how-to on the issue tracking system should also have some useful pointers.
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/issue_track.htm#BABBGBJG
cheers,
Ron

Variants created by user ID

Similar Messages

Maybe you are looking for