Variants Migration 3.0 to 7.0
Hi,
We are migrating Queries, Work Books & Web temples to 3.0 to 7.0.
I have gone through many links for Query or Work Book Variants Migration 3.0 to 7.0.
I found some of the tables like RSRPARAMETRIZA - Parameterization for a query, workbook, and web application. RSRVARIANT -- Variant Values
Is it possible to Migration existing variants 3.0 to 7.0 or same variants we need to create in DEV and transport to PRD?
Pls share the steps.
Any help is appreciated.
Regards,
Prakash
Hi Phani,
Many Thanks for your reply..!
I checked the attached link.
Once we run the report RSR_MIGRATE_VARIANTS migrates into 7x tables RSRPARAMETRIZA,RSRPARAMETRIZAT but this activity I can do across the land scape D.Q,P or we can transport tables pls correct me.
same report report migrates all Global & Local saved Variants?
Thanks
Prakash
Similar Messages
-
3.5 to 04s Variant Migration Issues
We have upgraded our sandbox system from 3.5 SP18 to 7.0 SP15. I ran the two variant migration programs RSR_VARIANT_XPRA and RSR_MIGRATE VARIANTS. Ran the MIGRATE pgm with the the convert ALL option. Also applied a couple of variant related Notes, one from SP 17 - to get the variant description to display and one from SP16 that added a button on the variable input screen to allow the display of <b>User</b> variants rather than <b>Global</b> variants.
We're using the Bex Analyzer 3.5 front end and here's what we are seeing -
All the 3.5 variants were migrated as Global variants rather than User variants, which the program comments seem to indicate is what was intended. Our preference would have been to convert variants as User and then create the much smaller number that we need to be Global - or give us the option.
The program did NOT adjust the variant Technical name as it was supposed to e.g. replacing spaces with an underscore character. So we can load a converted variant, but if we try to modify and save it, it provides error messages about the unconverted technical name being invalid - it doesn't like the spaces that are still in the tech name that it failed to convert.
There is only a single Save button - which only saves new variants as User variants. Any way to save it as a Global variant from the 3.5 Bex Analyzer front end?
Anyone having similar issues or aware of fixes in the works. Otherwise, I'll need to open Customer Msgs I guess.
It seems like not enough attention has been given to maintaining BEx Analyzer 3.5 functionality.You may wish to check this -
Note 1003481 - Variant Migration - Migrate all variants
It is possible to save 3.x variant with characters other than A-Z; 0-9 and '_'. But this is not allowed in new variant storage for technical name of a variant. Due to this fact, the migration report automatically attempts to convert all the characters of original 3.x variant, that are not allowed in new variant storage, in to '_'. But since the variants are always identified by its description in variable screen in NW2004s, this change will be transparent for end-users and will not affect the usage directly. When there is no language dependent description found for the corresponding 3.x variant, the migration report automatically saves the original 3.x variant name (with special characters) as its description (in current logon language) in new variant storage.
Hope it Helps
Chetan
@CP.. -
Upgrade 3.0B to NW04s - Existing variant missing in new frontend!
Hi all
We have upgraded our system from BW 3.0B to Netweaver 2004s BI with Support Package 12 installed. On the frontend, we are using the new BEx Analyzer with SP14 (rev 797).
Our existing query variants from 3.0B are no longer visible in the new BEx Analyzer 2004s, while new variants can be saved and used.
The existing variants are only visible and usable from RSRT or from BEx Analyzer 3.x.
We have applied: Note 1003481 - Variant Migration - Migrate all variants
and ran 'RSR_VARIANT_XPRA', before running 'RSR_MIGRATE_VARIANTS' but to no avail.
We have looked at Note 1054634 - Query variants are not found or are not listed for selection as well.
But we have tested with queries with technical names shorter than 25 characters but it is not working as well.
Looking at:
https://weblogs.sdn.sap.com/cs/user/view/cs_msg/14320
Re: BW 3.x and 2004s upgrade
it seems like an unresolved issue..
Can anyone help us?UPDATE:
After the RSR_MIGRATE_VARIANTS program was run, the variants were migrated over to the RSRPARAMETRIZA and RSRPARAMETRIZAT tables.
However, the variants are still not showing up in the new BEx Analyzer frontend. We also noticed the difference between newly created variants in the new BEx Analyzer and the migrated variants:
Newly created variants - use a !PERS47P* naming convention in the PARAMN field
Migrated variants - use the variant name itself.
Newly created variants - CONTENT field which contains XML information
Migrated variants - CONTENT field XML appear to be incomplete (<> tags not closed etc..)
Newly created variants - CONTENT field makes reference to generated ID
Migrated variants - CONTENT field XML tried to store actual variant selection data but is incomplete.
Has anyone used the migration programs successfully before?
Thank you -
Variants not migrated to Version 7
Hi everyone,
We successfully did our technical upgrade and are in the process of migrating all the queries and workbooks to Version 7.0. We used the migrating of variants programs during the initial technical upgrade and have no problem seeing the variants in Version 3.x of the reports and workbooks.
We don't see any variants when we run the reports after they have been migrated. The old 3.x variants are showing up in the RSRVARIANT, RSRVARIANTDIR and RSRVARIANTVIEW tables. I believe the variants should be in the RSPARAMETRIZA and RSPARAMETRIZAT tables - but these are blank.
We tried migrating the variants again and get an error that they could not be migrated.
Did anyone have this issue? If so, please let me know!
Thanks
KathleenHi Pratik,
It turns out that we were missing authorizations! We needed to have full access to the authorization object S_RS_PARAM. In fact, users need to have this object as well, otherwise they won't see their parameters.
When you run the program to migrate the variants, if you don't have the authorizations for changing (we only had display) then the migration will not be done.
We re-did it after and now everything is fine!
Hope this helps!
Kathleen -
Migration of Variant Configuration Master Data
Hi,
Could you please guide what is the best method for Migration of Variant Configuration Master Data from SAP to SAP and from Legacy to SAP.
1. Send Object Dependencies
2. Send Characteristics
3. Send Variant Functions
4. Send Variant Table Structure
5. Send Object Dependencies again
6. Send Classes.
Best Regards,
KomalHi,
So i have configured the system accordingly with the OSS Notes 954816 and 956054. This should allow that knew created master data customers could be replicated in the FDSCM-COL to the business partners.
I'm know trying to use the MDS_LOAD_COCKPIT to migrate the old customers master data but the system seems to not create any data.
Does this transaction needs to have any other configuration more our to activate any BAPI ?
PS: I tried to activate the FDM_PARTNER_MAP_COLL bapi but the system did not allowed stating the message ENHANCEMENT194.
Best Regards,
Bruno Sousa -
Migrate all variant of old user id to new user id
I am working on Single sign on project. I need to change all user id to match with a network id. That is no problem. However, I need to be able to bring along all variant for old user id to the new id. Do you know is there a Bapi or a way to do that? I know I can have user login as old id and create a copy of the variant but that will be a lot of work for user and they may complain. I donu2019t want users to do anything except change their id. All the process should be invisible to users.
Is there a way to do this? If so, please let me know.
Thanks,Hello,
I face the same problem as you. What did you finally do ?
Have you got a solution ?
Thanks for your reply.
Vanessa Roulier -
Fiscal Year Variant doubt - while migrating to ECC 6.0
Hi
While migrating to ECC 6.0 (from 4.7EE) in the middle of the year -
- Can we use the old FYV ?
- Is there any problem if we use the same FYV ?
VVRno reply..no answer
-
SAP EH&S 4.6C Migration to SAP ECC6
Hi All,
We are having separate SAP R/3 instance for EH&S module (4.6C system). The transactions system is SAP R/3 4.7 system and is due for ECC6 upgrade. Just want to know
1. Has anything changed in EHS module from 4.7 to ECC6. If yes, what?
2. if we migrate the EH&S functionality from the separate instance for EHS to transactional system in ECC6 / 4.7 R/3 system - will it get affected.
3. What will be the best time to do the migration of EHS data to transactional system (before or after upgrade). We are using specifications, active phrase libraries, reports, report templates and report generation variants and WWI server for MSDS.
Request your help. Thanks
PS: Even partial answers will also help a lot.
Best Regards,
VithalHi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
/people/thomas.mann2/blog/2006/08/22/sap-upgrade-conflicts-1
http://service.sap.com/instguides > mySAP Business Suite Applications > mySAP ERP > mySAP ERP 2005 > Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences, refer to the below site u2013
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6. Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality, which can be downloaded to a word document if required. Also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps some extent.
regards,
mahesh. -
Error: item id=simple1 doesnt exist in assignment to variants id=simple1
Hi Experts,
I am getting error while i am creating Bill of Material (BOM) for negative values.
when ever i am creating negative bom by using bapi i am getting this error
select mandt reinr matnr werks stlal bmsch phflg ztext stktx postp idnrk menge sortf imein lgort posnr potx2 fmeng alprf ewahr alpgr rekri from zbomtemp into table it_final1 where reinr = p_reinr.
loop at it_final1 into wa_final1.
if wa_final1-menge < 0.
CLEAR it_bomgroup1.
it_bomgroup1-bom_group_identification = 'BAPI_SMP_COL1'.
it_bomgroup1-object_type = 'BGR'.
it_bomgroup1-object_id = 'SIMPLE1'.
it_bomgroup1-bom_usage = '6'." YOU COULD CHANGE THE BOM USAGE TO YOUR
it_bomgroup1-CREATED_IN_PLANT = '1001'.
it_bomgroup1-ltxt_lang = sy-langu.
it_bomgroup1-technical_type = ' '.
**it_bomgroup1-bom_text = wa_final-ztext. "'Simple BoM - FM'.
APPEND it_bomgroup1.
CLEAR it_variants1.
it_variants1-bom_group_identification = 'BAPI_SMP_COL1'.
it_variants1-object_type = 'BOM'.
it_variants1-object_id = 'SIMPLE1'.
it_variants1-alternative_bom = '06'. " 'wa_final-stlal. .
it_variants1-bom_status = '01'.
it_variants1-base_qty = wa_final1-bmsch ."_final-bmsch. ."'1.000'.
it_variants1-valid_from_date = sy-datum.
it_variants1-function = 'NEW'.
APPEND it_variants1.
CLEAR it_matrel1.
it_matrel1-bom_group_identification = 'BAPI_SMP_COL1'.
it_matrel1-material = wa_final1-idnrk ."'000000000200001342'.
it_matrel1-bom_usage = '1'.
it_matrel1-alternative_bom = wa_final1-stlal."'01'.
it_matrel1-PLANT = '1001'.
APPEND it_matrel1.
**********CLEAR it_subitemas.
**********it_subitemas-bom_group_identification = 'BAPI_SMP_COL1'.
**********it_subitemas-sub_object_type = 'SUI'.
**********it_subitemas-sub_object_id = 'SIM1'.
**********it_subitemas-super_object_type = 'ITM'.
**********it_subitemas-super_object_id = 'SIMPLE1'.
**********APPEND it_subitemas.
CLEAR it_itemas1.
it_itemas1-bom_group_identification = 'BAPI_SMP_COL1'.
it_itemas1-sub_object_type = 'ITM'.
it_itemas1-sub_object_id = 'SIMPLE1'.
it_itemas1-super_object_type = 'BOM'.
it_itemas1-super_object_id = 'SIMPLE1'.
it_itemas1-valid_from_date = sy-datum.
it_itemas1-function = 'NEW'.
APPEND it_itemas1.
***CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
***EXPORTING
***all_error = 'X'
***TABLES
***bomgroup = it_bomgroup
***variants = it_variants
***items = it_items1
***materialrelations = it_matrel1
***itemassignments = it_itemas
*****subitems = it_subitems
*****subitemassignments = it_subitemas
***return = return.
***if sy-subrc = 0.
***CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
EXPORTING
WAIT = 'X'.
IMPORTING
RETURN =.
LOOP AT return.
*****WRITE:/ return-type, return-id, return-number,
*****return-message.
*****ENDLOOP.
CALL FUNCTION 'ZBAPI_BOMCREATIONNEGATIVE'
EXPORTING ** here this fm is nothing but standrd bapi + standard bapi commit ..
P_REINR =
TABLES
BOM1 = it_bomgroup1
VAR1 = it_variants1
ITE1 = it_items1
MATR1 = it_matrel1
ITEA1 = it_itemas1
RET = return
**clear it_bomgroup.
clear it_matrel1.
**clear it_itemas.
**clear it_variants.
clear it_items1.
**LOOP AT return.
**WRITE:/ return-type, return-id, return-number,
**return-message.
**ENDLOOP.
**else.
**CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
RETURN =
ELSE.
it_items1-bom_group_identification = 'BAPI_SMP_COL1'.
it_items1-object_type = 'ITM'.
it_items1-object_id = 'SIMPLE1'.
it_items1-item_no = wa_final1-posnr."'0010'.
it_items1-item_cat = wa_final1-postp.."'L'.
it_items1-component = wa_final1-idnrk."'000000000200001343'.
it_items1-comp_qty = wa_final1-menge.."'2'.
it_items1-valid_from_date = sy-datum.
APPEND it_items1.
endif.
endloop.
**CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
LOOP AT return.
WRITE:/ return-type, return-id, return-number,
return-message.
ENDLOOP.
ENDFUNCTION.
here i am using this and i am getting that error and any one reply to his
sry for u r distrubance
regards,
pradeep
Edited by: pradeep_546 on May 4, 2011 3:06 PM
Edited by: pradeep_546 on May 5, 2011 10:32 AM
Edited by: pradeep_546 on May 6, 2011 11:05 AMhi Kim,
Sorry for the mis-intepretation.
I was about to say that i facing the problem for another Apshell say 'Apshell2'
I was not able to find out the OLAP database for this Apshell2. But for Apshell the OLAP db does exist in Analysis server.
Any suggestions so that i can get the other apshell2 in the analysis server.
we have done a migration based on this given link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20a26f50-4252-2a10-8c97-a2c7058cd804
Regards,
chandru. -
Error while migrating PAR 7.0 to 7.4
Hi Experts,
As we are migrating form EP 7.0 to EP 7.4 .
I got ear file from Par migration tool.
Importing ear in nwds 7.3 and resolving error , I deploy the ear in portal it is working fine.
But when i migrate the web Project to Web dc in Track . It is showing errors at build time but in Java files there is no Red mark .
To resolve errors i have created External Library and ear for External and add the htmlb_api.jar as public part . and Define dependecy in Web dc but it is still showing errors.
Build File is below
Development Component Build (2014-05-31 12:00:27 GMT+05:30 (IST))
Component name: appls/usefullink_d0_newnwdidc_web
Component vendor: adani.com
SC compartment: com.adani_ADANI_PAR_1
Configuration: EP1_ESS_D
Location: EP1_ESS_D
Source code location: http://aimdmp:50100/dtr/ws/ESS/com.adani_ADANI_PAR/dev/inactive/DCs/adani.com/appls/usefullink_d0_newnwdidc_web/_comp/
DC root folder: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\
DC type: Java
Host: ADMINIB-9G29PH6
DC Model check:
DC is available locally
validating dependency to build plugin "sap.com/tc/bi/bp/javaLib"
validating dependency to public part "api" of DC "adani.com/appls/externallib"
validating dependency to public part "archives" of DC "adani.com/appls/externallib"
validating dependency to public part "extlib_assembly" of DC "adani.com/appls/externallib"
validating dependency to public part "extlib_compilation" of DC "adani.com/appls/externallib"
validating dependency to used DC "adani.com/appls/extlibear"
validating dependency to public part "extlibear_assembly" of DC "adani.com/appls/extlibear"
DC model check OK
Start build plugin:
using build plugin: sap.com/tc/bi/bp/javaLib
starting build plugin from : C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\sap.com\tc\bi\bp\javaLib\_comp\gen\default\public\saplib\
Build Plugin 'JavaPlugin', Version 7.30 SP 5 (NW731CORE_10_REL, built on 2013-11-30 00:01:40 +0100, CL166627)
development component: appls/usefullink_d0_newnwdidc_web (adani.com)
software component: ADANI_PAR (com.adani)
location: EP1_ESS_D
type: Java
build variant: default
source location: http://aimdmp:50100/dtr/ws/ESS/com.adani_ADANI_PAR/dev/inactive/
output location: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\t2\467E48D66F1396B5F9AE0955FA811780\default
generation folder: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\t\467E48D66F1396B5F9AE0955FA811780
plugin start time: 2014-05-31 12:00:28 GMT+05:30 (IST)
Java VM: SAP Java Server VM, 6.1.066 24.55-b13 (1.6, SAP AG)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Package folder ".apt_generated" exists but is empty and will be ignored.
Checking path lengths for sources
Path length checks finished in 0 seconds
Preparing data context..
Data context preparation finished in 0.015 seconds
Creating Ant build file..
Creating output file: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\t2\467E48D66F1396B5F9AE0955FA811780\default\logs\build.xml
Using Java class: com.sap.tc.buildplugin.BuildJavaLib
Build file creation finished in 0.063 seconds
Starting Ant..
Using build file: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\t2\467E48D66F1396B5F9AE0955FA811780\default\logs\build.xml
Using build target: build
Using Ant version: 1.7.1
compile:
[echo] Starting Java compiler using the current JVM
[echo] Settings:
[echo] debug: on
[echo] optimize: off
[echo] deprecation: default
[echo] verbose: default
[echo] encoding: UTF-8
[echo] source: 1.6
[echo] target: 1.6
[echo] source path: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src
[echo] class path: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\externallib\_comp\gen\default\public\extlib_compilation\lib\java\com.sap.portal.htmlb_api.jar
[echo] output dir: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\t\467E48D66F1396B5F9AE0955FA811780\classes
[javac] Compiling 7 source files to C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\t\467E48D66F1396B5F9AE0955FA811780\classes
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Alert.java:3: package com.sapportals.portal.prt.component does not exist
[javac] ERROR: import com.sapportals.portal.prt.component.*;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Alert.java:4: package com.sapportals.portal.prt.resource does not exist
[javac] ERROR: import com.sapportals.portal.prt.resource.IResource;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Alert.java:6: cannot find symbol
[javac] ERROR: symbol: class AbstractPortalComponent
[javac] ERROR: public class Alert extends AbstractPortalComponent
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Alert.java:8: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentRequest
[javac] ERROR: location: class com.adani.usefullink.Alert
[javac] ERROR: public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Alert.java:8: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentResponse
[javac] ERROR: location: class com.adani.usefullink.Alert
[javac] ERROR: public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:3: package javax.servlet.http does not exist
[javac] ERROR: import javax.servlet.http.HttpSession;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:9: package com.sapportals.portal.prt.component does not exist
[javac] ERROR: import com.sapportals.portal.prt.component.IPortalComponentContext;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:10: package com.sapportals.portal.prt.component does not exist
[javac] ERROR: import com.sapportals.portal.prt.component.IPortalComponentRequest;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:11: package com.sapportals.portal.prt.component does not exist
[javac] ERROR: import com.sapportals.portal.prt.component.IPortalComponentResponse;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:13: cannot access com.sapportals.portal.prt.component.AbstractPortalComponent
[javac] ERROR: class file for com.sapportals.portal.prt.component.AbstractPortalComponent not found
[javac] ERROR: public class Userful extends PageProcessorComponent {
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:18: cannot find symbol
[javac] ERROR: symbol : class HttpSession
[javac] ERROR: location: class com.adani.usefullink.Userful
[javac] ERROR: static HttpSession session;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userlinkformail.java:15: package com.sap.security.api does not exist
[javac] ERROR: import com.sap.security.api.IUser;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userlinkformail.java:20: package com.sapportals.portal.prt.component does not exist
[javac] ERROR: import com.sapportals.portal.prt.component.IPortalComponentContext;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userlinkformail.java:23: package com.sapportals.portal.prt.runtime does not exist
[javac] ERROR: import com.sapportals.portal.prt.runtime.PortalRuntime;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\usefullinknew.java:4: package javax.servlet.http does not exist
[javac] ERROR: import javax.servlet.http.HttpSession;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\usefullinknew.java:7: package com.sapportals.connector.connection does not exist
[javac] ERROR: import com.sapportals.connector.connection.IConnection;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\usefullinknew.java:12: package com.sapportals.portal.prt.component does not exist
[javac] ERROR: import com.sapportals.portal.prt.component.IPortalComponentContext;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\usefullinknew.java:20: cannot find symbol
[javac] ERROR: symbol : class HttpSession
[javac] ERROR: location: class com.adani.usefullink.usefullinknew
[javac] ERROR: static HttpSession session;
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Alert.java:11: cannot find symbol
[javac] ERROR: symbol : class IResource
[javac] ERROR: location: class com.adani.usefullink.Alert
[javac] ERROR: IResource jspResource = request.getResource(IResource.JSP,"jsp/"+request.getParameter("page"));
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Alert.java:11: cannot find symbol
[javac] ERROR: symbol : variable IResource
[javac] ERROR: location: class com.adani.usefullink.Alert
[javac] ERROR: IResource jspResource = request.getResource(IResource.JSP,"jsp/"+request.getParameter("page"));
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:29: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentRequest
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:29: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentRequest
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:30: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentResponse
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentResponse response = (IPortalComponentResponse) this.getResponse();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:30: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentResponse
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentResponse response = (IPortalComponentResponse) this.getResponse();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:35: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentRequest
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentRequest req = (IPortalComponentRequest) this.getRequest();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:35: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentRequest
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentRequest req = (IPortalComponentRequest) this.getRequest();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:65: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentContext
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentContext ctxt = ((IPortalComponentRequest)getRequest()).getComponentContext();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:65: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentRequest
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentContext ctxt = ((IPortalComponentRequest)getRequest()).getComponentContext();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:155: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentRequest
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:155: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentRequest
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:156: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentResponse
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentResponse response = (IPortalComponentResponse) this.getResponse();
[javac] ERROR: ^
[javac] ERROR: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\src\com\adani\usefullink\Userful.java:156: cannot find symbol
[javac] ERROR: symbol : class IPortalComponentResponse
[javac] ERROR: location: class com.adani.usefullink.Userful.UserfulDynPage
[javac] ERROR: IPortalComponentResponse response = (IPortalComponentResponse) this.getResponse();
[javac] ERROR: ^
Ant runtime 0.421 seconds
Ant build finished with ERRORS
Compile failed; see the compiler error output for details.
Build stopped due to an error: Compile failed; see the compiler error output for details.
Build plugin finished at 2014-05-31 12:00:29 GMT+05:30 (IST)
Total build plugin runtime: 1.732 seconds
Build finished with ERROR
==== Post-Processing ==== started at 2014-05-31 12:00:29.905 IST
Copy the build logs
from: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\t2\467E48D66F1396B5F9AE0955FA811780\default\logs\
to: C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\gen\default\logs\
Build results in folder C:\Users\IBM_ADMIN\Desktop\Jayesh\nwds-extsoa-7.3-EHP1-SP11-PAT0002-win32\eclipse\workspace.jdi\0\DCs\adani.com\appls\usefullink_d0_newnwdidc_web\_comp\gen\default\ remain unchanged.What was the issue? Is your SAP now up?
>in Management console disp+exe is not turning to gree, its in yellow color from long time
for this if you search on marketplace you will get notes, and this issues already discussed many times. Hence request you to search.
Check https://service.sap.com/sap/support/notes/72248 -
Error in Routine while migrating standard Transformations from 3.5 to BI7.0
Hi Experts,
We are migrating the Standard trasformations, from old version to new BI 7.0 version. when trying to create the new transformation we are getting a routine error, and unable activate the transformation.
Trasformation Name: TRCS ZCO_OM_NAE_1 -> CUBE 0PS_C08
Routine Desc.: Conversion of Actual / Commitment / Plan to Resid.Order Plan
Source Fields: 0CURRENCY & 0FISCPER
Target Fields: 0AMOUNT & 0CURRENCY
Error Message: E:Field "COMM_STRUCTURE" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "DATA" statement.
Routine:
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
$$ end of rule type
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID Change Run ID.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Record type.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID Request ID.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0FISCVARNT Fiscal year variant.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0FISCYEAR Fiscal year.
FISCYEAR TYPE /BI0/OIFISCYEAR,
InfoObject: 0CURRENCY Currency key.
CURRENCY TYPE /BI0/OICURRENCY,
InfoObject: 0CO_AREA Controlling area.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0CURTYPE Currency Type.
CURTYPE TYPE /BI0/OICURTYPE,
InfoObject: 0METYPE Key Figure Type.
METYPE TYPE /BI0/OIMETYPE,
InfoObject: 0VALUATION Valuation View.
VALUATION TYPE /BI0/OIVALUATION,
InfoObject: 0VERSION Version.
VERSION TYPE /BI0/OIVERSION,
InfoObject: 0VTYPE Value Type for Reporting.
VTYPE TYPE /BI0/OIVTYPE,
InfoObject: 0WBS_ELEMT Work Breakdown Structure Element (WBS Elem
*ent).
WBS_ELEMT TYPE /BI0/OIWBS_ELEMT,
InfoObject: 0COORDER Order Number.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0PROJECT Project Definition.
PROJECT TYPE /BI0/OIPROJECT,
InfoObject: 0ACTIVITY Network Activity.
ACTIVITY TYPE /BI0/OIACTIVITY,
InfoObject: 0NETWORK Network.
NETWORK TYPE /BI0/OINETWORK,
InfoObject: 0PROFIT_CTR Profit Center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0COMP_CODE Company code.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BUS_AREA Business area.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0ACTY_ELEMT Network Activity Element.
ACTY_ELEMT TYPE /BI0/OIACTY_ELEMT,
InfoObject: 0STATUSSYS0 System Status.
STATUSSYS0 TYPE /BI0/OISTATUSSYS0,
InfoObject: 0PS_OBJ PS Object Type.
PS_OBJ TYPE /BI0/OIPS_OBJ,
InfoObject: 0VTSTAT Statistics indicator for value type.
VTSTAT TYPE /BI0/OIVTSTAT,
InfoObject: 0AMOUNT Amount.
AMOUNT TYPE /BI0/OIAMOUNT,
Field: RECORD Data record number.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
TABLES: ...
DATA: ...
FORM routine_0001
CHANGING
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
not supported
icube_values = g.
CLEAR result_table. REFRESH result_table.
type-pools: PSBW1.
data: l_psbw1_type_s_int1 type psbw1_type_s_int1.
data: lt_spread_values type PSBW1_TYPE_T_ACT_SPREAD.
field-symbols: .
füllen Rückgabetabelle !
move-corresponding to RESULT_TABLE.
check not RESULT_TABLE-amount is initial.
append RESULT_TABLE.
endloop.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0001
$$ end of 2nd part global - insert your code only before this line *
CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
*$*$ begin of routine - insert your code only below this line *-*
Data:
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
REFRESH:
MONITOR.
Runtime attributs
SOURCE_SYSTEM = p_r_request->get_logsys( ).
Migrated update rule call
Perform routine_0001
CHANGING
l_subrc
l_abort.
*-- Convert Messages in Transformation format
LOOP AT MONITOR INTO ls_monitor.
move-CORRESPONDING ls_monitor to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_subrc <> 0.
RAISE EXCEPTION TYPE cx_rsrout_skip_val.
ENDIF.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "compute_0AMOUNT
Method invert_0AMOUNT
This subroutine needs to be implemented only for direct access
(for better performance) and for the Report/Report Interface
(drill through).
The inverse routine should transform a projection and
a selection for the target to a projection and a selection
for the source, respectively.
If the implementation remains empty all fields are filled and
all values are selected.
METHOD invert_0AMOUNT.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "invert_0AMOUNT
ENDCLASS. "routine IMPLEMENTATION
Regards
Krishanu.Hi,
Go through the belowl link it may help you a lot
/message/7377688#7377688 [original link is broken]
Regards,
Marasa. -
Issue on migration of tax depreciation balances for group assets
Dear Experts,
My client is using group assets for tax depreciation report India.
The SAP implementation was done in 2006 during the data migration the
client was not clear of the values both individual asset wise and
group asset wise to migrate to tax depreciation area. So the tax
depreciation for some of the assets are migrated with some
(non caluclated) value.
Now the client want to see the tax depreciation group asset wise or if
possible individual asset wise.For this the group asset need to be
created and assigned to each individual asset in the asset master
record.
The fiscal year variant is v3, april to march with 4 quaters June,
Sep, Dec, Mar.
Now when the data migration for the current year come into picture
I can use AS81/AS82 for loading current year opening balance and
accumulated depreciation for all the group of assets as a whole. Or
I can use AS91/AS92 to load balances into tax depreciation of
each asset individually. But I am not sure whether this is correct.
And also what to do with the previous years balances. I am very
confused. Somebody suggest good solution.
When I create a legacy asset or group asset in AS91 and AS81
respectively the fields in the Takeover values screen are grayed
out and do not allow mw to input values. But I am able to enter
values by clicking the button Transactions in the Takeover values
screen and able to enter a value date , transacton type and amount
for tax depreciation area. Here again I am not convinced using 100
transaction type for current year opening balance. I used
transaction type 652(Unplanned tax depreciation on current year
acquisition) for accumulated current year dpereciation upto second
quarter septemeber 2008.
In asset explorer under "Planned values" tab the opening balance
must be visible under Fiscal year start column but it is displayed
under change column as I entered values for tax depreciation area
in AS81 in Transaction screen with asset value date as 01.04.2008
transaction type 100 and amount as xxxxxx and value date 30.09.2008
652 xxxxxxxx.
Need expert guidance on this
Rgds
KomalDear Experts,
Your inputs are awaited.
Rgds
Komal -
Simple guide to Migrate SL Server Wiki 10.6.8 to Lion Server 10.7.2
These instructions assumes that you already have the Wiki server functional on the new OSX Lion Server 10.7.2 and that you are logged in as a system administrator.
On the SL Server, browse to \Library\Collaboration and right click on the Collaboration folder and click "Get Info"
Scroll all the way to the bottom and expand "Sharing & Permissions"
If the Lock icon shows to be locked, click it and enter an Administrators password associated with the user account you are logged in under. Make sure the permissions for "Everyone" are set to "Read & Write". Then click on the small Gear icon below that and select "Apply to Enclosed Items". It will ask you if you are sure, tell it yes.
Now copy the Collaborations folder to the new Lion Server. Create the following directory to save the files too. \myoldwiki It will probably ask you to authenticate making a new folder at the root of the drive. So if prompted, tell it to allow and enter your administrator password is prompted. So now you have \myoldwiki\collaboration at the root of your new lion server.
Open Safari and browse to http://localhost on your Lion Server to verify that your existing server is working. If you get the "Welcome to OS X Lion Server" page with several icons for My page, Updates, Wikis, People, & Podcasts then your server is working. If not, see "Setting up OS X Lion Wiki Server". (An article that has not yet been written-Soon to follow)
If you click on Wikis, and if this is a fresh install, you will not see any wiki pages listed. On the top right of the web page, click on the + sign to create a new wiki. You can name it Test Wiki like I did and then create the page. Once created, go to it to make sure that its there.
Once your new Wiki server is confirmed to be functional, open terminal and enter the following command:
sudo wikiadmin migrate -r /myoldwiki/collaboration
Then press Enter/Return. Enter your users password if prompted. (Remember, passwords do not use echo in terminal so you will not see your password as you type it. Press Enter/Return again and you should see something similar to the following:
2011-12-18 10:50:18.315 wikiadmin[5033:307] Updating schema...
2011-12-18 10:50:18.324 wikiadmin[5033:307] Schema updates completed.
2011-12-18 10:50:18.326 wikiadmin[5033:307] Migrating...
2011-12-18 10:50:18.899 wikiadmin[5033:307] Migrating known users
2011-12-18 10:50:18.921 wikiadmin[5033:307] Generating placeholders for all known pages and wikis
2011-12-18 10:50:29.054 wikiadmin[5033:307] Found 7 pages belonging to 6 wikis and 2 users.
2011-12-18 10:50:29.057 wikiadmin[5033:307] Migrating project '(Wiki Page 1 Title Here)' (1 of 6)
2011-12-18 10:50:39.137 wikiadmin[5033:307] Migrating project '(Wiki Page 2 Title Here) ' (2 of 6)
2011-12-18 10:50:49.282 wikiadmin[5033:307] Migrating project '(Wiki Page 3 Title Here) ' (3 of 6)
2011-12-18 10:50:59.350 wikiadmin[5033:307] Migrating project '(Wiki Page 4 Title Here) ' (4 of 6)
2011-12-18 10:51:09.475 wikiadmin[5033:307] Migrating project '(Wiki Page 5 Title Here) ' (5 of 6)
2011-12-18 10:51:19.635 wikiadmin[5033:307] Migrating project '(Wiki Page 6 Title Here) ' (6 of 6)
2011-12-18 10:51:29.666 wikiadmin[5033:307] Re-scanning 0 pages for pasted image/attachment URLs
2011-12-18 10:51:29.669 wikiadmin[5033:307] Copying content to real tables...
2011-12-18 10:51:29.942 wikiadmin[5033:307] Destroying migration entity and scratch tables...
2011-12-18 10:51:30.295 wikiadmin[5033:307] Done
2011-12-18 10:51:30.304 wikiadmin[5033:307] Importing user preferences
2011-12-18 10:51:40.311 wikiadmin[5033:307] Rebuilding search index...
2011-12-18 10:51:50.724 wikiadmin[5033:307] Done
2011-12-18 10:51:50.726 wikiadmin[5033:307] Migration complete
Depending on the size of your wiki on SL Server, and depending on how many pages and attachments you have installed on it, this process could take anywhere from several seconds to several minutes. Also your entry may vary from mine above depending on how many pages you have as well. I currently only have 6 pages as you can see. Overall, the end result is what you want to see: "Migration complete". This is a very good sign.
If you get a lot of errors like i did my first time trying to do this, I found that i forgot to turn on and verify that my new Lion Server web server and wiki page were fully functional prior to starting the migration. So if you get several errors that look similar to this.......
2011-12-18 01:23:52.160 wikiadmin[2930:307] *** Terminating app due to uncaught exception 'PGCConnectionError', reason: 'could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"?
*** First throw call stack:
0 CoreFoundation 0x00007fff915d6286 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff958d9d5e objc_exception_throw + 43
2 PostgreSQLClient 0x0000000110038349 -[PGCConnection init] + 0
3 PostgreSQLClient 0x0000000110038425 -[PGCConnection initWithInfo:] + 157
4 PostgreSQLClient 0x0000000110037f8a +[PGCConnection connectWithInfo:] + 47
5 wikiadmin 0x000000010ff0db1e wikiadmin + 31518
6 wikiadmin 0x000000010ff2248f wikiadmin + 115855
7 wikiadmin 0x000000010ff0824c wikiadmin + 8780
8 wikiadmin 0x000000010ff07ba4 wikiadmin + 7076
You need to check your web server and wiki settings again.
Once everything is complete, you will need to go into your Server app on Lion Server and turn off the web server and also the wiki server. After about a minute or so, restart the web server then the wiki server and give it about 30 seconds or so to completely come back online. Now browse to http://localhost on the Lion Server and you should once again see the "Welcome to OS X Lion Server" page. Click on wikis and you should see the list of wikis you imported as well as the test wiki you created earlier. This will confirm that the files have been truly copied to the proper location for wikis on the new Lion Server.
At this point, your old wiki pages are ready to be used on your new OS X Lion Server.
There is a drawback with this process. Since you are moving ONLY the wiki database over to the new machine, all of the original users and groups is not transferred. As you can see i have 6 wikis and 2 users. This process doe not import the users and their configurations over to the new server. That process is completed by "Exporting" the "Server Admin Settings" & "Service Settings" from the SL Server "Server Admin" and importing them in the reversed fashion on the new Lion Server using Server Admin on the new server. This, however, is for another tutorial yet to be written. Mostly because i have yet to do it.
Good Luck.....
Isaac-in-Texas
NOTE: If you find an error in this posting, keep in mind we are all human and all make mistakes. Shoot me an email and i'll see if i can get it corrected.
Proud Owner of.....
2011 MabBook Pro * 2.3Ghz i7 * 16GB 1333 Ram * 750GB HDD Internal
2008 iMac 21.5" * 3.06Ghz Core 2 Duo * 16GB 1067 Ram * 1TB HDD Internal * Mercury Elite Pro 5TB RAID 5 External
iPhone 4 32GB
iPhone 4 8GB (Wife)
iPhone 3G 16GB (Spare)
iPad 32GB 1st Gen
iPod Touch 2nd Gen (My Son)
Apple TV 2nd Gen
Airport Extreme
I'm sure i'm missing something.....Hi.
Purchase Mac OS X Lion v10.7 (or OS X Lion Server) at the App Store.
Make sure your Mac meets Lion's requirements before purchasing.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OSX v10.6.6 or later (V10.6.8 recommended)
7GB of available spare
From here > Apple - OS X Lion - Technical specifications
A must read before upgrading to Lion > Lion upgrade questions: Apple Support Communities
You can access the App Store from your Apple menu, your Dock, or your Applications folder. -
We have problems in abap rules when migrate the infosource
We are having problems to do the migration of some objects of version
3.x to version 7.
There are some objects standard like Update Rule, InfoSource and
Datasource that when we migrated the rules ABAPS contained in the
Update Rule and Infosource are not migrate properly.
We are using the method of automatic migration that when clicking the
right button on the object, choosing the option additional functions,
create transformation and input the name of the new infosource. The
same way is necessary to migrate the transfer structure. After this we
migrated the Datasource and we tried to activate all objects, but
several erros happened in the abap rules.
Example: In the new Transformation based n Upadate Rule 0PS_C08 in the
key figure 0AMOUNT, the routine show me the follow error:
E:Field "COMM_STRUCTURE" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement
"DATA" statement.
This is one example, but this conversion happened for several
transformations with abap rules.
Which is the recommendation for the standard objects in this case and
the others cases ? For objects Z* there some recommendation too?
Old Routine in Upadte Rule:
"PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
RESULT_TABLE STRUCTURE /BI0/V0PS_C08T
USING COMM_STRUCTURE LIKE /BIC/CS0CO_OM_NAE_1
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
ICUBE_VALUES LIKE /BI0/V0PS_C08T
CHANGING RETURNCODE LIKE SY-SUBRC
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
type-pools: PSBW1.
data: l_psbw1_type_s_int1 type psbw1_type_s_int1.
data: lt_spread_values type PSBW1_TYPE_T_ACT_SPREAD.
field-symbols: .
füllen Rückgabetabelle !
move-corresponding to RESULT_TABLE.
check not RESULT_TABLE-amount is initial.
append RESULT_TABLE.
endloop.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
New Routine - Based on Update - DTP:
"PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
$$ end of rule type
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID ID de execução de modificação.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Categoria de registro.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID ID requisição.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0FISCVARNT Variante de exercício.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0FISCYEAR Exercício.
FISCYEAR TYPE /BI0/OIFISCYEAR,
InfoObject: 0CURRENCY Código da moeda.
CURRENCY TYPE /BI0/OICURRENCY,
InfoObject: 0CO_AREA Área de contabilidade de custos.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0CURTYPE Tipo de moeda.
CURTYPE TYPE /BI0/OICURTYPE,
InfoObject: 0METYPE Tipo de índice.
METYPE TYPE /BI0/OIMETYPE,
InfoObject: 0VALUATION Perspectiva de avaliação.
VALUATION TYPE /BI0/OIVALUATION,
InfoObject: 0VERSION Versão.
VERSION TYPE /BI0/OIVERSION,
InfoObject: 0VTYPE Ctg.valor para reporting.
VTYPE TYPE /BI0/OIVTYPE,
InfoObject: 0WBS_ELEMT Elemento do plano da estrutura do projeto
*(elemento PEP).
WBS_ELEMT TYPE /BI0/OIWBS_ELEMT,
InfoObject: 0COORDER Nº ordem.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0PROJECT Definição do projeto.
PROJECT TYPE /BI0/OIPROJECT,
InfoObject: 0ACTIVITY Tarefa do diagrama de rede.
ACTIVITY TYPE /BI0/OIACTIVITY,
InfoObject: 0NETWORK Diagrama de rede.
NETWORK TYPE /BI0/OINETWORK,
InfoObject: 0PROFIT_CTR Centro de lucro.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0COMP_CODE Empresa.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BUS_AREA Divisão.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0ACTY_ELEMT Elemento operação diagram.rede.
ACTY_ELEMT TYPE /BI0/OIACTY_ELEMT,
InfoObject: 0STATUSSYS0 Status do sistema.
STATUSSYS0 TYPE /BI0/OISTATUSSYS0,
InfoObject: 0PS_OBJ Tipo de objeto do PS.
PS_OBJ TYPE /BI0/OIPS_OBJ,
InfoObject: 0VTSTAT Código estatístico para ctg.valor.
VTSTAT TYPE /BI0/OIVTSTAT,
InfoObject: 0AMOUNT Montante.
AMOUNT TYPE /BI0/OIAMOUNT,
Field: RECORD Nº registro de dados.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
TABLES: ...
DATA: ...
FORM routine_0001
CHANGING
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
not supported
icube_values = g.
CLEAR result_table. REFRESH result_table.
type-pools: PSBW1.
data: l_psbw1_type_s_int1 type psbw1_type_s_int1.
data: lt_spread_values type PSBW1_TYPE_T_ACT_SPREAD.
field-symbols: .
füllen Rückgabetabelle !
move-corresponding to RESULT_TABLE.
check not RESULT_TABLE-amount is initial.
append RESULT_TABLE.
endloop.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0001
$$ end of 2nd part global - insert your code only before this line *
CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
*$*$ begin of routine - insert your code only below this line *-*
Data:
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
REFRESH:
MONITOR.
Runtime attributs
SOURCE_SYSTEM = p_r_request->get_logsys( ).
Migrated update rule call
Perform routine_0001
CHANGING
l_subrc
l_abort.
*-- Convert Messages in Transformation format
LOOP AT MONITOR INTO ls_monitor.
move-CORRESPONDING ls_monitor to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_subrc <> 0.
RAISE EXCEPTION TYPE cx_rsrout_skip_val.
ENDIF.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "compute_0AMOUNT
Method invert_0AMOUNT
This subroutine needs to be implemented only for direct access
(for better performance) and for the Report/Report Interface
(drill through).
The inverse routine should transform a projection and
a selection for the target to a projection and a selection
for the source, respectively.
If the implementation remains empty all fields are filled and
all values are selected.
METHOD invert_0AMOUNT.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "invert_0AMOUNT
Please, HELP!!!!
Thanks,
Mateus.Hi,
I checked the code and as I saw you're using return tables. This feature is not yet implemented in transformations! You have to find a workaoround for a code in start- or endroutines that appends the data.
In general you have to replace comm_structure and icube_Values by new class attributes/variables.
On which SP are you currently?
Regards,
JUergen -
I migrated my bpel process manager from Version 2.1.2 [oc4j linux] to 10.1.2.0.0 [using jboss as application server].
The orabpel schema for 10.1.2.0.0 seems to be a bit different.
I installed the new schema and then dumped all the data from my previous schema. I also successfully deployed the 2.1.2 processes onto 10.1.2 version.
I can initiate a new instance of the process, however , the previously completed instances or not completed instances fail with the following error,
16:28:06,061 INFO [STDOUT] <2006-01-31 16:28:06,061> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "instance manager": Variant not found.
The variant "_$$audit-event-count" has not been declared in the current scope. All variants must be declared in the scope before being accessed.
Any advice is greatly appreciated. Thanks.JScript is JavaScript.
Ah, now there's part of the confusion :)
If you're asking about a Windows Script Host (WSH) script, you don't have to declare stdin because it's part of the host.
Ok... So if I understand you correctly, I'm actually programming in J(ava)Script on windows for WSH. Simply trying to call ReadLine fails as well, as it is not defined according to the compiler.
Be specific: What are you trying to do? Tell what you want to do, not
how you think it needs to be done.
which brings me to my current issue: attempting to ReadLine() (in order to get the program to pause for a moment, from
this example)
I know I put up a pretty big wall of text back there, sorry about that.
EDIT: Well, I think I've learned
about J*script. It sounds like JScript and Javascript are more just versions of ECMAScript.
Maybe you are looking for
-
Can I have both facing and non-facing pages in a document?
I am trying to assemble a booklet with 11x17 spreads - some of these will be two facing 8.5x11 pages, but others will be a single 11x17 image, and would be better to treat them as a one page spread. We will be producing a hardcopy and an electronic v
-
How can i using datasource in toplink's map file
In the TopLink map : <toplink:login xsi:type="toplink:database-login"> <toplink:platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</toplink:platform-class> <toplink:user-name>test</toplink:user-name> <toplink:password>C23487CFA59
-
PXE Deploy Fails - BCD Error 0xc98
When I attempt to PXE boot any machine, physical or virtual, I get an error message, the pertinent details are: "Recovery - Your PC needs to be repaired File: \Tmp\x86x64{GUID}.bcd Error code: 0xc0000098" DHCP Options were set as follows: 066: CMDP (
-
Unable to start oracle app server 10g through opmnctl file Red Hat linux
Hi gurus, I have a VM (Red Hat Linux based). I am not able to start my application server 10g through opmnctl file (exists in opmn/bin folder). I open that folder opmn/bin through terminal and write the following command opmnctl startall nothing is h
-
Any ideas on how I could get this into my outline?
/* Accumulate the monthly numbers across the months of the year to get the year to date *//* numbers. This accumulation is only valid for income statement accounts. */FIX (@LEVMBRS (Entity, 0), @DESCENDANTS(INCOMESTMT, 0), &BudStart:&BudFinish)BUDYTD