Variants not migrated to Version 7

Hi everyone,
We successfully did our technical upgrade and are in the process of migrating all the queries and workbooks to Version 7.0. We used the migrating of variants programs during the initial technical upgrade and have no problem seeing the variants in Version 3.x of the reports and workbooks.
We don't see any variants when we run the reports after they have been migrated. The old 3.x variants are showing up in the RSRVARIANT, RSRVARIANTDIR and RSRVARIANTVIEW tables. I believe the variants should be in the RSPARAMETRIZA and RSPARAMETRIZAT tables - but these are blank.
We tried migrating the variants again and get an error that they could not be migrated.
Did anyone have this issue? If so, please let me know!
Thanks
Kathleen

Hi Pratik,
It turns out that we were missing authorizations! We needed to have full access to the authorization object S_RS_PARAM. In fact, users need to have this object as well, otherwise they won't see their parameters.
When you run the program to migrate the variants, if you don't have the authorizations for changing (we only had display) then the migration will not be done.
We re-did it after and now everything is fine!
Hope this helps!
Kathleen

Similar Messages

Variant of program is not the current version

Hi
When the program started in CCS, it has been cancelled and giving the "Variant of program is not the current version" . how can i solve this and where ill get the soln for this type of error.
Reply me asap
thanks
Umashankar

you did not give much details about your problem. where you got this error, which program ? what are you trying to do ??
If this is an ABAP Program,you can always create a new variant directly in QA & PRD
SE 38 > Progrma name > Execute (if you have selection screen) > enter your new selections > 'Goto' menu > Save as variant > give new name > Save
If you dont have selection screen in your program
SE 38 > Program Name > Change/ Display > Goto > Variants > Create
Cheers
Praveen

SE16 and Variant Not Current Version message

I am getting an error message when I try and execute SE16 using a variant. The message is DB634 and it says "Variant x of program y is not the current version". I have Functional asking me what is wrong and I can't tell them because I can't figure out how to debug it to see what it doesn't like or what it is even looking at. The message appears as soon as you click Variant x in your Drop List of Variants for the table. Any help is appreciated.

I think the problem is that the current selection screen of the table in SE16 has fewer or different fields for selection that the variant has. Go to Settings/Fields for selection and check all the fields that the variant needs. This should be the solution.

Process Variant does not exist in version A:

Good day
I have changed an existing process chain by removing an InfoPackage that had no link to any other process but the 'start'. When I 'test' the chain the message: "Process Variant AND .... does not exist in version A" is displayed. I have not even touched the 'AND' process.
As a result the chain does not want to activate.
What am I missing here?
Thanks
Cornelius Faurie

Thanks for your quick response. Sorry, I did not give you all the information. The 'AND' process was still connected between two Ioad processes (One IP loads Mdata from a flat file, then the AND process, then the second IP load from CRM (0BPARTNER)) BUT there were two AND's with the same name. I think I removed the process of the one AND at one stage, but the second remained (Copy of the same AND).
I have removed the AND process in totality and created a new one and it is activating now.
Sorry, my stupidity.
Thanks anyway
C

I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download.

I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download. How can I fix this?

Go to iTunes > about iTunes. What version are you running? If necessary, hold down the option key while starting iTunes and create a new, test library so it will start.

Layouts - Variant &1 does not exist for version &2 of layout module &3

Hi Sap All.
when i am trying to create IDOC's of type LAYMOD01 using LSMW with IDOC Object type ,there were some IDOC;s failing in SAP With status 51 saying as "Layouts - Variant &1 does not exist for version &2 of layout module &3".
the following below text explain you the error message related to one particular IDOC of type LAYMOD 01 which was failed in sap with status 51 :
Variant 6325 does not exist for version 0000 of layout module EC-83-0214
can any one explain me the reason on why the IDOC's were failed.
regards.
Varma

not required any more

Variant NLFRS1 of program RFSSLD00 is not the current version

Hi,
I am getting a error message "Variant NLFRS1 of program RFSSLD00 is not the current version" when I tried to display the variant
Help me to solve the issue?
Thanks & Regards
Suresh Kumar

Mahesh,
One more thing to add, if the variant is changed purposefully,
Go to
SE38
For the Program,
1. select the variant 'RADIO BUTTON'
2. Click 'Display'.
3. On the Menu, Click 'Variants'.
4. Click on 'Adjust'.
5. Now, Click the 'Execute' button.
Execute the Program with the Variant now.
This should resolve the isssue.

Report variant not transport to ECC 6.0

hi all,
after migration from SAP 4.6 to ECC6, i cant see the SAP transaction report variant not transaport over....is there any SAP table store the user variant not transported ?
Thanks .

Pls. check manual:
Phase SAVE_VAR_CHK
After the upgrade, many of your variants can no longer be used because the relevant selection screens
have changed. If your Basis Source Release is 4.5B or higher, the SAP system offers two reports to
save the variants:
n RASUVAR1 saves your variants on the source system.
n RASUVAR2 restores the variants in the target system.
During phase SAVE_VAR_CHK you can decide whether you want the upgrade tool to run report
RASUVAR1. The report is started in phase JOB_RASUVAR1. If you have decided to run report
RASUVAR1, phase JOB_RASUVAR2 automatically starts report RASUVAR2 towards the end of the
upgrade.
For more information about the reports, see SAP Note 712297.

Varient of the program is not the current version

Hi
when User try to run SE16 - they are receiving messages similar to the one below, when they attempt to select a saved variant.
Variant VOUCHER LIST of program /1BCDWB/DBBKPF is not the current version
Message no. DB 634
Diagnosis
You attempted to start report /1BCDWB/DBBKPF using variant VOUCHER LIST. Since thisvariant was generated, the report SELECT-OPTIONS or PARAMETERs havechanged considerably, i.e. the type or length no longer match andPARAMETERs have become SELECT-OPTIONS or vice versa. Many of thesechanges are so serious that even attempting to import the variantresults in runtime errors.
Procedure
Adjust or delete the variant.
Users are seeing a similar error when they try any table (BKFP is the one above, but have seen on table VBAK, VBAP, etc.).
Pls suggest the solution of this problem.
Regards
Amar

This would happen when the selection screen of the table got change. Like when users had saved the variant, there were 5 fields on the selection screen but eventually it got changed to more or less fields.
The only way, I can think of is to recreate all the variants.
To get rid of this problem, you can use transaction SE16N instead of the SE16.
Here You can save the variant by pressing the SAVE button.
To get the variant: Enter Table name, Go to > Variants > Get. Select your variant.
Regards,
Naimesh Patel
Edited by: Naimesh Patel on Mar 24, 2009 9:23 AM - Added SE16N

Settings are not migrated in 1.2.1.32.13

I've been trying to migrate the settings from 1.2.1.3200 to 1.1.2.32.13 but not all of them are migrating.
connections are not migrating, although SQL Formatter and preferences are. H`ave anyone experienced anything like this??
Export/Import did work.
Windows XP SP2
SQL Developer 1.2.1.3200 to 1.2.1.32.13
Tony

Barry,
The problem seems to be between 3200 and 3213, I have migrated settings from 2998 to 3213 successfully.
i have tested migration between these versions here are the results and some stack information. hope will help.
From 2998 to 3200 Successful
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\sqldeveloper_3200
Using ide.user.dir=null
WARNING: version.properties contains an invalid VERSION property (i.e. it is not
a float)
java.lang.NumberFormatException: multiple points
        at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:10
84)
        at java.lang.Float.parseFloat(Float.java:394)
        at oracle.ide.Version.<clinit>(Version.java:57)
        at oracle.ide.IdeCore.$init$(IdeCore.java:154)
        at oracle.ide.IdeCore.<init>(IdeCore.java:162)
        at oracle.ideimpl.DefaultIdeCore.<init>(DefaultIdeCore.java:64)
        at oracle.ideimpl.DefaultIdeCore.<init>(DefaultIdeCore.java:69)
        at oracle.ideimpl.Main.start(Main.java:89)
        at oracle.ideimpl.Main.main(Main.java:51)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.PCLMain.callMain(PCLMain.java:45)
        at oracle.ide.boot.PCLMain.main(PCLMain.java:37)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.classloader.util.MainClass.invoke(MainClass.java:89)
        at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
218)
        at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
        at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
        at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.Launcher.invokeMain(Launcher.java:508)
        at oracle.ide.boot.Launcher.launchImpl(Launcher.java:106)
        at oracle.ide.boot.Launcher.launch(Launcher.java:60)
        at oracle.ide.boot.Launcher.main(Launcher.java:49)
java.lang.IllegalStateException: GlobalSettings already exists, cannot initialis
e twice.
        at oracle.javatools.db.GlobalSettings.initialiseInstance(GlobalSettings.
java:45)
        at oracle.ideimpl.db.DatabaseIdeAddin.initialize(DatabaseIdeAddin.java:6
4)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManage
rImpl.java:433)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManag
erImpl.java:244)
        at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(Ad
dinManagerImpl.java:157)
        at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1517)
        at oracle.ide.IdeCore.startupImpl(IdeCore.java:1280)
        at oracle.ide.Ide.startup(Ide.java:642)
        at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
        at oracle.ideimpl.Main.start(Main.java:90)
        at oracle.ideimpl.Main.main(Main.java:51)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.PCLMain.callMain(PCLMain.java:45)
        at oracle.ide.boot.PCLMain.main(PCLMain.java:37)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.classloader.util.MainClass.invoke(MainClass.java:89)
        at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
218)
        at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
        at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
        at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.Launcher.invokeMain(Launcher.java:508)
        at oracle.ide.boot.Launcher.launchImpl(Launcher.java:106)
        at oracle.ide.boot.Launcher.launch(Launcher.java:60)
        at oracle.ide.boot.Launcher.main(Launcher.java:49)
Addin: Translator PlSql is trying to register a input type (.plsql) which confli
cts with translator PlSql who already using this input type
From 3200 to 3213 Un-Successful
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\sqldeveloper_3213
Using ide.user.dir=null
Addin: Translator PlSql is trying to register a input type (.plsql) which confli
cts with translator PlSql who already using this input type
reloadBuffers(): 49 nodes checked in 6.07898E-4 second(s)
reloadBuffers(): 49 nodes checked in 4.14857E-4 second(s)
From 2998 to 3213 Successful
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\sqldeveloper_3213
Using ide.user.dir=null
java.lang.IllegalStateException: GlobalSettings already exists, cannot initialis
e twice.
        at oracle.javatools.db.GlobalSettings.initialiseInstance(GlobalSettings.
java:45)
        at oracle.ideimpl.db.DatabaseIdeAddin.initialize(DatabaseIdeAddin.java:6
4)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManage
rImpl.java:433)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManag
erImpl.java:244)
        at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(Ad
dinManagerImpl.java:157)
        at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1517)
        at oracle.ide.IdeCore.startupImpl(IdeCore.java:1280)
        at oracle.ide.Ide.startup(Ide.java:642)
        at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
        at oracle.ideimpl.Main.start(Main.java:90)
        at oracle.ideimpl.Main.main(Main.java:51)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.PCLMain.callMain(PCLMain.java:45)
        at oracle.ide.boot.PCLMain.main(PCLMain.java:37)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.classloader.util.MainClass.invoke(MainClass.java:89)
        at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
218)
        at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
        at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
        at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.Launcher.invokeMain(Launcher.java:508)
        at oracle.ide.boot.Launcher.launchImpl(Launcher.java:106)
        at oracle.ide.boot.Launcher.launch(Launcher.java:60)
        at oracle.ide.boot.Launcher.main(Launcher.java:49)
Addin: Translator PlSql is trying to register a input type (.plsql) which confli
cts with translator PlSql who already using this input type

Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

Hello
I have Lync 2013 and 2010 , still i didn't finish my migration completely from 2010 to 2013 .this is coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013 front end and backend server's .
later on after restarting both the front end and the back end server's i start having hundred's of these error's related to "LS Call Park Service".
so any advice for these issue ? and what is the effect for these error .
below is the error I got .
The database being used by Group Pickup is not the appropriate version.
The database is not the correct version:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
Actual... SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
Cause: The database has not been upgraded.
Resolution:
Upgrade the database to CU1.
==============================================================
There was a problem communicating with the Group Pickup backend database.
There were problems accessing SQL server:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
Error code: -2146232060
Error number: 229
Cause: This may be caused by connectivity issues with the backend database.
Resolution:
Check if SQL backend is running and accepts connections from Group Pickup.
=============================================================================
Kind Regards
MK

Hello
thanks Holger for u r replay .
due to the Microsoft article about the cu :
I run only :
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
Install-CsDatabase -CentralManagementDatabase command to apply the changes.
here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
VERBOSE: Install databases required by Lync Server role(s).
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is DbState_RequiresMinorUpgrade.
Database rtcxds set to mode Restricted.
Dropping all procedures, functions and views from database rtcxds.
Executing RtcDb.sql...
Adding master role...
Setting owner for database rtcxds to sa.
Creating login MyDomain\RTCHSUniversalServices.
Creating user MyDomain\RTCHSUniversalServices.
Creating Schema MyDomain\RTCHSUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
Setting the database rtcxds to multi user mode.
Database rtcxds is set to multi user mode.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcshared.
Database created by script "RtcSharedDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
Checking state for database rtcab.
State of database rtcab is DbState_RequiresMinorUpgrade.
Database rtcab set to mode Restricted.
Dropping all procedures, functions and views from database rtcab.
Executing RtcAbTypes.sql...
WARNING: Warning: Failed to execute batch --
-- Copyright (c) Microsoft Corporation. All rights reserved.
exec sp_addrole N'ServerRole'.
Executing RtcAbDb.sql...
Setting owner for database rtcab to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
Setting the database rtcab to multi user mode.
Database rtcab is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
Database created by script "RgsConfigDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
Database created by script "RgsDynDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
Checking state for database cpsdyn.
State of database cpsdyn is DbState_RequiresMinorUpgrade.
Database cpsdyn set to mode Restricted.
Dropping all procedures, functions and views from database cpsdyn.
Executing CpsDyn.sql...
Setting owner for database cpsdyn to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
Setting the database cpsdyn to multi user mode.
Database cpsdyn is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
Database created by script "ArchivingDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
State of database LcsCDR is DbState_RequiresMinorUpgrade.
WARNING: The database LcsCDR being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
WARNING: The database LcsCDR being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
Database LcsCDR set to mode Restricted.
Dropping all procedures, functions and views from database LcsCDR.
Executing CdrDb.sql...
Setting owner for database LcsCDR to sa.
Creating login MyDomain\CSAdministrator.
Creating user MyDomain\CSAdministrator.
Creating Schema MyDomain\CSAdministrator.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
Setting the database LcsCDR to multi user mode.
Database LcsCDR is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing CdrJobs.sql...
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
State of database QoEMetrics is DbState_RequiresMinorUpgrade.
WARNING: The database QoEMetrics being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
WARNING: The database QoEMetrics being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
Database QoEMetrics set to mode Restricted.
Dropping all procedures, functions and views from database QoEMetrics.
Executing QoEDb.sql...
Setting owner for database QoEMetrics to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
Setting the database QoEMetrics to multi user mode.
Database QoEMetrics is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing QoEJobs.sql...
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
VERBOSE: No changes were made to the Central Management Store.
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
PS C:\Users\MK>
I hope some one can confirm no issue with what I did ??
Kind Regards
MK

Variant not existing

Please explain me the reason of this message:
"variant xxx of program yyy is not the current version"
Why is this happening?

Hi,
This has happened because there are some changes to the program (on which variant was created) after the variant creation.
You need to re-create the varaint after any changes to the base program.
Let me know if you need more info.
Pl reward if you find this info useful.
Thanks,
Ramesh

Time Machine backups do not migrate from iMac to MacBook Pro

I just moved from a iMac G5 to a MacBook Pro. I love Apple's migration tool, but it seems that Time Machine backups do not migrate.
I checked with support, and did a basic amount of searching, and it seems that I need to erase and reformat the backup drive, losing all of my backups.
Can this be true? That's a pretty screwy backup solution.
Is it possible to rename the backup folder from "iMac G5" to "MacBook Pro"?
Is it possible to add a MacBook Pro backup folder to the one already there?
Any help is appreciated.

I'm not quite sure what you mean. It sounds like you successfully migrated, and got everything set up properly on the new Mac.
Now you want TM to just continue backing-up the new Mac to the old Mac's backups?
If so, then no, that's not going to work. TM keeps the backups for each Mac completely separate. This is usually an advantage, so you can back up two or Macs to the same drive without any conflicts.
Plus, the version of OS on your new Intel laptop is very different from the one from your old PPC desktop; a whole different set of drivers, and of course code for Intel vs. PPC.
So TM on the new Mac cannot treat the old backups as if they were from the new Mac. It must start a whole new "sequence" of backups for the new Mac. If there's room on the disk, you can leave the old backups there until you're sure you don't need them, but that presents another problem: when you want to delete them, you can do it only one at a time, via TM, using the procedure in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That's rather tedious and time-consuming, so most folks just erase the TM drive and let it start fresh.
If I've misunderstood, please clarify the situation.

EA2 - MacOSX - Settings not migrated from 1.5

When I downloaded and launched 2.1, it did not migrate my settings (connections, snippets, etc.) from 1.5.1. I can't find a way to import them manually. Suggestions greatly appreciated!

K., your suggestion did bring up the migration dialog but it did not show any available SQL Developer installations to migrate from.
To work around this, I copied the contents of the old preferences location into the new:
cp -r ~/Library/Application Support/SQL Developer/* ~/.sqldeveloper
Then relaunching v2.1 allowed me select the old version to import. There is definitely an issue here that needs to be addressed. Why was the preferences location moved for this version?
Thanks for all the suggestions and quick replies, and especially for developing SQL Developer and keeping it free.

Stored Procs not migrating to Oracle.

I am using Oracle 8.1.5 work bench version 2.0.2.0.0. using SQLSERVER plug-in.
I am able to successfully capture the source database from SQLSERVER. After creating the Oracle Model the Oracle Model tab is not showing all the user objects (tables, proc etc). But when I generate the Oracle database I see all the tables/indexes and data. The problem is it did not create my stored procedures.
Can we use the work bench to migrate Stored procedures from SQLSERVER to Oracle ?
Stored Procedures are not migrating to ORacle.
Help is appreciated.
-Ramesh.

Are you seeing any errors.
The Workbench will migrate stored procedures usually they are migrated to the 'sa' user in Oracle.
Please contact [email protected] if you have any more issues.
Regards
John

Variants not migrated to Version 7

Similar Messages

Maybe you are looking for