Varience in data

Dear All,
i have a query in Production planing reports
we have one report which we run on daily basis
the issue here as below
For sale date 10.01.2009, the SKU 5433 has been converted to Material 543301 (variant) for the depot 500 (Plant 1530). We have checked the Material on the ECC side and the material 543300 does not have a variant maintained for plant 1530. Effectively, the conversion for this SKU 5433 should have been 543300, as the variant is not maintained for this depot. But the report shows that the SKU got converted to 543301
because of this we have varience, how to rectify this
Txs

Dear Csaba,
Thanks for your reply.
I have set the varience key in plant through OKVW. I haven;t got what entries to be made in OMV1. Whn I created the order, the varience key was not coming automatically.
Please guide.
Sumeet

Similar Messages

Qty and Date Variance using Purchasing InfoCube

Using Purchasing Cube, I want to find out the Qty Variance and Date variance,
Iu2019m calculating these using GR Posting date and Requested Delivery Date and GR Qty and Qty in UoM.
Iu2019ve the following doubts:
1.     In order to calculate the Variance, do we need to filter the data pertaining to any particular BW Transaction Key (0PROCESSKEY) since we donu2019t want Goods Issues (can be Purchase Returns or intra company Stock Transfers ), If so what are the values for the Process Key to be considered for filter.
2.     Though the Qty key figure matches the Requested Qty, the PO status is u2018Openu2019. What could be the possible reasons?
3.     The qty. and days variance for the POs already received can be calculated. But what should be done incase of POs for which Goods are not yet received? Again in that scenario, we can have two cases: Delivery Past Due and Delivery Date in Future. How to tackle these 2 cases. As per our Requirement, we have to calculate the difference between System date and Requested Delivery Date incase of Past Delivery Date so that we can have the variance as of System Date. Like If the Delivery Date is 25th Nov, if we run the Query on 28th, it should show 3 days late and if run on 29th, it has to be 4 days if still undelivered. Please give me the code to be written in Transformations.
We have not yet decided what has to be done in the second case i.e. Future Delivery Date. Please guide me what is the best option in that case.
Thanks,
Aryaman

Hi,
1. In order to calculate the Variance, do we need to filter the data pertaining to any particular BW Transaction Key (0PROCESSKEY) since we donu2019t want Goods Issues (can be Purchase Returns or intra company Stock Transfers ), If so what are the values for the Process Key to be considered for filter.
You need to add Z-Keyfigures and then write Routines based on Process Keys in Update Rules/Transformations and filter the required Process Keys, you need to find required Process Keys in ECC, SPRO-->Reference IMG an dthen search for BW Transactional Key and see it disuss with MM FUnctional COnsultant and Identify it.
2. Though the Qty key figure matches the Requested Qty, the PO status is u2018Openu2019. What could be the possible reasons?
I faced the problem with 2LIS_02_* datasources so I created new generic data source and used it. Just take only one record with that you track in ECC. You must take MM Consultants help, they will guide you.
3. The qty. and days variance for the POs already received can be calculated. But what should be done incase of POs for which Goods are not yet received? Again in that scenario, we can have two cases: Delivery Past Due and Delivery Date in Future. How to tackle these 2 cases. As per our Requirement, we have to calculate the difference between System date and Requested Delivery Date incase of Past Delivery Date so that we can have the variance as of System Date. Like If the Delivery Date is 25th Nov, if we run the Query on 28th, it should show 3 days late and if run on 29th, it has to be 4 days if still undelivered. Please give me the code to be written in Transformations.
We have not yet decided what has to be done in the second case i.e. Future Delivery Date. Please guide me what is the best option in that case.
Once you have Qty and Dates from Transactional Data then it is easy to calculate the Date Varience and Qty varience, see the follwoing URL it is having one article How to Calculate Meterial Aging whcih will give how to calculate the differnce..
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Thanks
Reddy

Acknowlegment for PO Item has date variance

Hi gurus,
While doing the Inbound Delivery the following error:
" Acknowledgement for PO Item has DATE VARIENCE"
Can some body throw light on it ?
Thanks & Regards
Srikanth

hi,
if you try do delivery for the PO item before the date that is mentioned in the PO. Please check the In PO,Item details, under the tab Confirmations, the date entered for the inbound delivery. so you can change the date in PO to the required date and do the inbound delivery.
regards
sadhu kishore

Delivery date control in Inbound

Hi,
If i am receiving goods after 10 days of the dilivery date mentioned in po, the system should not allowed to make Inbound Delivery.
How can i do this in sap
Regards
laxman

hi,
try though user exit.
get help of ABAPER to write user exit.
logic is when the difference in PO del date and todays date (system date) SYSDATUM is more than 10 days then issue error message as ucannt post as del date and posting date having varience more than 10
regards,
sujit

How can i write and read the same data

hi,
         i have attached my program to this mail. i have some problems in this program.
problems:
1. I want to select the threshold for the rms,varience and s.d.
But what i used is not doing that. i want to fix the upper threshold value and lower threshold value.
when ever the input crosses upper threshold value i want the output and it will remains uptill the value above the lower threshold value.
Once it come down the lower threshold value the output should be stopped.
2. I want to write this in to a file and i want to read this file. is this possible or not.
            please try to help me i am very new with lab view6i
       REGARDS
CHAMARTHY KOMAL DILEEP.
   [email protected]
Attachments:
dileep.vi ‏93 KB

The easiest way to perform a certain action (such as file I/O) based on a certain condition (such as whether a value has passed a certain threshold) is to use a comparison VI in combination with a case structure. Then you can specify that if your rms, standard deviation and variance are above a threshold then perform a certain action.
Also consider using shift registers to keep track of data from the last loop. If I understand you correctly, you want to start logging data when an upper threshold has been passed. Then you want to continue logging data until a lower threshold is passed. I have attached a non-functional but explanatory VI that will help explain how to implement logic to that effect. It also demonstrates that you can indeed write and read from the same file in a loop. The best way to do this is to open the file before the loop, do all the necessary writing and reading in the loop, and then close the file after the loop.
Hope this helps!
Jarrod S.
National Instruments
Attachments:
dileep_example.vi ‏61 KB

Varience Key in production order

Dear All,
There is varience key field in the control data tab of production order header. Please let me know where to define in customization the default value for this field.
I am putting it manually in each order currently.
Thanking you in advance.
Sumeet

Dear Csaba,
Thanks for your reply.
I have set the varience key in plant through OKVW. I haven;t got what entries to be made in OMV1. Whn I created the order, the varience key was not coming automatically.
Please guide.
Sumeet

Process Order Varience Elimination

Hi All
I am brand new to this Community and I hope that I started at the correct place? If not, please tell me where to go!
First of all, let me explain our working cenario. We have two process orders, one is a BULK process order we create to manufacture the Semi finished Product, then we have to create a FILL process order, to consume the BULK or SFG. For example we produce adhesive in a mixer using the bulk process order, we then have to drain that into the FILL process order.
Now during the manufacturing process our Process order called for 5 500kg of Raw materials (BOM) we add all that into the mixer and now we have created our Semi Finished Goods. Now that needs to be drained into pails. That will be our Finished Goods Process order or the Finished Goods.
During the process there will be a loss ( SCRAP ) we put in 5 500kg of RAW material and take out 5 200kg of Finished Product.
How can i confirm this process order with out creating a varience??
The way we do it now is as follows : Confirm Bulk Process Order planned 5 500kg , confirmed yield as 5200kg and scrap as 300kg, all raws is consumed 100% according to BOM.
We then confirm our FILL process order, Planned 5 500kg , yield to be confirmed 5200kg Scrap 300kg .
all goes well till then, when we check our cost analysis, we see we have big variences, due to differences between Target and Actual. we can not understand why this happens.
I need you experts to help me, as I am getting bolder everyday.
Thank you all

Hi Abhi,
In the process order, Mas. Data tab, whether the recipe group & recipe counter is displayed.
If this is blank, the possible reason could be, the order type is tuned to select master recipe manually ( controlled from COR4 transaction)
Other reason could be...The process order start date is earlier than the recipe (operations & phases) validity date.
Also in Process order change mode, in Mas.data tab, click the selection button near to the production version & manually enter the valid production version & check whether system is copying the recipe of its throwing any errors.
Thanks & regards
Mahesh Babu
Reward points if useful
Edited by: Mahesh Babu MG on Jan 30, 2008 10:17 PM
Edited by: Mahesh Babu MG on Jan 30, 2008 10:20 PM

Production order varience analysis

Hi experts,
While doing the production order varience analysis, I was checking the cost analysis in some orders all the data is perfect i.e. material consumption and Machine hour rates but still that order is showing positive varience under *Reciept to orders* Can you please tell me from where this cost is getting captured.

Narayan,
It would be good if you can share the screen shot of the cost analysis of order for better understanding of the problem. You can post the screen shot in some of the websites and share that as a link here or else please send me to my mail Id which you can take it from my profile.
Regards,
Prasobh

I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.

Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Refreshing the Data from a embed view in a view container

Hi everybody
I would like to know how can I do to refresh all data from a View with a view container the problem is:
that I have a window that has a view at the same time this has a view container. The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
The question is:
How do I force the view to refresh all the data or call again the wdDoInit() method?
Thank you for your help

Aida,
Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
1) Goto the Interface Controller of C1 and create a method there lets say doSomething
2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
wdThis.wdGetC1CompInterface().doSomething();
Chintan

ITunes & Windows Vista Home - Error File C:\Program Data\Apple Computer\Installer\Cache\iTunes 10.5.142\iTunes.msi was rejected by digital signature policy.

Tried
https://discussions.apple.com/thread/2713232?start=0&tstart=0
and
http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
with no avail!!!
iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
PLEASE HELP!!!

Update:
I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
Microsoft Windows Vista Home Edition (Build 6000)
MICRO-STAR INC. MS-6728
iTunes 7.6.0.29
QuickTime 7.4
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
iTunes Serial Number 20D6EAF059AB94B4
Current user is not an administrator.
The current local date and time is 2008-01-15 19:09:32.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., Radeon X1600/X1650 Series
ATI Technologies Inc., Radeon X1600/1650 Series Secondary
** External Plug-ins Information **
Plug-in Name: Last.fm iTunes plugin
Plug-in Loaded: Yes
Plug-in Version: 0.0.13
Plug-in File Version: 2.0.13.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
No drives showed up to be tested.

Format C drive, what steps to take for retaining all data of iTunes?

Hello
I want to format my C drive of Laptop and shift my itunes to E drive. I'm on windows 7. C drive is having itunes and in that I have synced my 2 iphones and 1 ipad.
Now I want to format the C drive and want to retain all the data, backup, media etc of my synced data with the itunes.
What I've done is that I transferred my music location from C to E drive by using apple forum discussion. I changed destination to E drive in ADVANCED TAB in Edit-Preferences. Then orgainzed data. That was successful.
Now please help me on what to do next so that i can retain my all my data of itunes safe before formatting my C drive.
Thanks in advance

This definitely isn't intended as a substitute for tt2's tutorial (which is comprehensive and more detailed - in case of any differences I'd follow what's stated there), but in summary you should be doing the following. I've assumed that, as per your original post, you've changed your media location to E:\iTunes and consolidated the library. You now have a "split library" where:
E:\iTunes contains a folder called iTunes Media which in turn contains several subfolders such as Automatically Added to iTunes, Audiobooks, Music, ...
C:\Users\your user name\Music\iTunes contains the following folders and files:
Album Artwork (folder)
Previous iTunes Library (folder)
iTunes Library Extras.itdb (file)
iTunes Library Genius.itdb (file)
iTunes Library.itl (file)
iTunes Library.xml (file)
I'd suggest making sure that you're running the latest version of iTunes before proceeding - by default, this will be the version that you download and install when you rebuild your PC.
Before you change anything else, exit iTunes. Now copy all of the folders and files in C:\Users\your user name\Music\iTunes to the same folder on your external drive (E:) that contains your media folder. You should now have this:
or something very similar. Now restart iTunes while holding down the SHIFT key. You will see this dialog:
Select "Choose Library ..." and navigate to the folder on your external drive with the content as described above. Select the iTunes Library.itl file and click OK. iTunes will load - check that everything you expect to see is there.
You now have a "portable library", i.e., all your media and the files that iTunes uses to organize them. You can use this in conjunction with any PC running Windows and iTunes (noting limitations regarding your iTunes account and authorizations). As tt2 suggested in his response, before you go any further:
Make a backup of your new portable library to another device.
De-authorize your iTunes account.
Back up everything else you need to retain from the C: drive of your PC (this is beyond the scope of this forum - there's plenty of help out there on various Microsoft sites, etc.). Just remember that once you take the plunge and reformat the C: drive anything that you haven't backed up is gone ...
Once you've reformatted the drive and reinstalled Windows, install iTunes. As befpre, hold down the SHIFT key when you start it up and select the iTunes Library.itl file on your external drive. You can then re-authorize iTunes and be back in business ...

I was given the wrong macbook when I gave mine in for repair. I want to complain. Also, they wiped ALL my data off the hard drive. I want to complain to someone in authority. How?

I am extremely disappointed and angry with Apple service. I am a writer and booked three weeks in Spain so that I could finish my book. On the second day my laptop cut out on me asI was working on it, so I took it to Goldenmack in Cadiz. Not only was I given someone else's macbook when I went back to collect it, but then when I returned to the UK, the Apple shop in Brighton managed to delete ALL my data from the hard drive because I was unlucky enough to get a trainee on her first day. I have since learned she should not have deleted my data without even running a diagnostic. She told me she was going to 'restore' the drive. I took this to mean she was going to restore my work. But no! She erased the lot.
I complained and eventually was put in touch with a supervisor, who I was told had authority to resolve the issue. She said she would get the shop to phone me. That was ten days ago and I'm still waiting.
Ok so there's nothing I can do now to get back the three chapters of my book that I have lost and didn't back up, but the hard drive on this laptop is still faulty. I try to back up my work every time I use the machine but as soon as I attach an external drive, the whole thing shuts down. I can't use it any more as I can't risk losing any more work. This laptop is only just over a year old and this is just not acceptable, especially since I have really looked after it.
This is an appalling service I have encountered from Apple, and I am not going to ignore it. I have contacted the young chap whose laptop I was erroneously given, and the repair of which I paid for! (although I did eventually get a refund), to ask him if he had been given mine as well. He said he had been completely unaware that his laptop had been given to me and he is furious as he had loads of "sensitive material" on it." I have no idea in whose hands my laptop has been either, or indeed what damage it sustained while it was supposed to be in for repair.

Contact Apple Support:
http://www.apple.com/support/contact/
Apple - How to Contact Us:
http://www.apple.com/contact/
Be sure to refer to the repair ticket number.
Sounds like a terrible mixup.
Good luck & happy computing!

Data Back Up Plan

Hi,
My internal hard drive, 320 GB, 'fully loaded', on my 2 year old imac crashed 10 days ago.
Since I had the extended warranty, the 'local' Apple store replaced the internal drive within hours
at no charge and even loaded Snow Leopard and iLife. With a well updated TimeMachine on an external hard drive I was back working at my imac the next day. When I realized after the crash that my precious 250 GB of pictures in Adobe Lightroom and iPhoto, along with a few videos were saved on just one older Maxtor external hard drive, it made me think about a more solid back up procedure.
The idea now is to move all big volume files to one or more external hard drives.
In the meantime I have transfered the iPhoto and Lightroom files to an external hard drive (WD MyBook II, 2x1 TB in RAID 1), which gives me the first layer of back up: http://www.bhphotovideo.com/c/product/552322-REG/WesternDigital_WDH2Q20000N_2TB_My_BookStudio.html
In a second step I am planning on making a clone (with SuperDuper or CarbonCopy) of the internal hard drive (mainly operating systems and applications) and the external hard drive (all big data files) on one additional external hard drive, i.e. OWC Mercury Elite AL Pro Raid 0, 2 TB http://eshop.macsales.com/item/Other%20World%20Computing/ME8Q7T20GB64/
I am looking for advise here:
Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
Would appreciate comments and advise.

reckling wrote:
Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
No. A clone is of your boot volume only. But those apps can make separate backups of multiple drives, either to multiple drives or to separate partitions on the same drive.
Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
2 is not only better, but your only option with CCC or SD.
TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
There is no "right" answer, just a number of possibilities. Some thoughts:
You could use TIme Machine to back up both your internal HD and the WD set to the OWC, if it's at least twice the size of the data on both. It looks like it can be configured as a +Concatenated RAID set+ (both drives into a single 2 TB volume), so that should work well.
Or use TM to back up your OSX drive, and CCC or SD to back-up the media drive.
The CCC or SD backups usually aren't practical to run more than once a day, so consider them your "secondary" backups.
Also strongly consider getting something off-site (safe deposit box, workplace, relative's house, etc.), so you're also protected against fire, flood, theft, direct lightning strike on your power lines. Portable external HDs are great for that. Some things may even be appropriate to take to DVDs.
The problem with that is, there aren't many portables over about 640 GB (LaCie has a 1 TB for either $300 or $400: http://www.lacie.com/us/products/product.htm?pid=11357).
CCC is donationware, so you can use it free for a while. If you decide to keep it, send them some $$ so they can keep it up to date. SD has a free version, but to do updates (rather than a full replacement) or automatic scheduling, you need the paid version (about $30). Either is available via Google, VersionTracker.com, or MacUpdate.com.

Varience in data

Similar Messages

Maybe you are looking for