Varient configuration order bom

can we change the order bom created during sales order creation through varient configuration without ECM activities?
thanking you
srinivas

You mean "Selected Sheet Weight" in the configuration of the window when creating the production order or sales order ?

Similar Messages

  • Variant Configuration - Order BOM problems

    Good morning,
    I am having problems regarding the Order BOM in variant configuration. I have maintained the configuration profile as follows:
    CONFIG PARAMETERS
    Ordem BOM
    Result oriented
    Multilevel
    BOM application - SD01
    ORDER BOM
    Maint. in order allowed - checked
    Automatic fixing - checked
    I have also maintained a BOM, for usage '5 - sales and distriburion', with the selection conditions at the object dependencies.
    When I test the results in CU50, assign all characteristics and push the button "Engineering" the icons for manual maintenance appear correctly in the screen...BUT when I raise the actual order, the icons are gone, therefore I cant add or delete items of the selected BOM.
    Any ideias of how to fix that?
    Thanks in advance.
    Adriano Cardoso

    Note 303446
    Note 901452
    composite Note 774346
    Please refer to above notes. Hope it helps
    Regards
    Sai

  • Unable to save the sales order in varient configuration

    Hi Gurus,
    In varient configuration i have done all the settings and it works fine, and i am getting one error
    while saving the sale order(incomplete long) showing configuration.
    while click the error shwoing like this :
         Item 000011 can only be changed by configuring material XXXX(item 000010)
    Error Message NO. V1456
    (Item &1 can only changed by configurable material &2 (item &3))
    Please help in in this regards.
    Where i am missing the settings.
    Thanksa and reagards
    E.Rambabu

    Dear Rambabu,
    While saving the sales order Configuration showing in the incompletion log means it is related to configurable material only so you look in these areas,
    1.Check the BOM settings whether BOM is exploding properly or not.
    2.Item category is getting determined or not.
    3.Have you able to select the sub item items through configuration selection screen or not.
    4.Go to transaction VOV7 check the item category settings related to the configuration.
    5. Have you maintained all the data in the KMAT (Configurable) material master data like class assignment etc.
    I hope this will help you,
    Regards,
    Murali.

  • Varient Configuration prod order is not picking the super routing operation

    Dear Experts,
    In varient configuration,I have maintain Super routing and Super bom for KMET material.While creation of prod order or converting plan order to prod order,Routing is not getting selected.I have maintained dependency and have checked Production sheduling profile,order type and order dependent parameter,all is ok.Even the Super Bom is getting selected after MRP run as per my requirment.
    What I am not getting is selection of routing for production order.Can any of the expert help to find the missing link.
    Regards,
    Rajesh Prasad.

    Hi
    For material Variant (FERT) production order Routing is not picking?Just check the Selection condition which is assigned to the operation is same as the selction of material variant i.e., Char & Char values has configured in MRP 3 View of Material variant.
    Check this and revert back
    Regards
    Praveen

  • Production Order BOM with Variant Configurable Material

    Hi,
    I have a requirement to process the document items in the Production Order BOM for a variant configurable martial. I am not sure which Function Module will do this purpose. I checked the FM: CS_BOM_EXPL_MAT_V2 and does not seem to be working.
    Can you please help me with a suitable Function Module or program that will process the Production Order BOM? Appreciate Your Help.
    Thanks,
    Kanan
    Edited by: Kannan SA on Jul 6, 2011 8:59 PM

    What are you doing with the characteristics right now ?
    If you want operations selected based on characteristic values, you need to have dependencies written just like you do (or in your case, will do) in your BOM components.
    I understand the business-push to not do things 100% at the start and just "oh we'll add that part later" but I would really push back to get that part included initially.

  • Configurable Material as BOM component in SALES Order BOM

    Hi Gurus
    I have following
    1. Material ABC is a configurable material (variant)
    2. BOM of this ABC has further configurable materials
    Is it possible to maintain requried charasterstic of the compoents which are configurble at the time of SALES ORDER BOM CREATION.
    If yes, how. please explain.
    Thanks in advance
    sunil

    Dear Sunil,
    Please refer to the following link:
    http://sap-img.com/sap-sd/sales-bom-implementation.htm
    I will suggest you to visit  http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
    Moreover there is a separate section of FAQs with answers which will help you in great deal.
    Do let me know in case of any queries.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Order BoM Configuration

    In our business we use multi level configuration, as a result, when we use CU51 to manage Engineering to Order details on Sales Order BoM the lower level configuration is part of the CU51 activities.
    When we complete any actions in CU51 and save the order BoM, the lower level configuration is recreated on the date the order BoM work was saved.
    Example:
    Parent Material A and Child Material B - both configurable.
    When an order is created for A on 01/01/14 the configuration for the A and B is saved in order change documents for each material with a creation date of 01/01/14.
    Engineer completes Order BoM work 01/03/14 on material A, when Order BoM is saved the lower level configuration obtains new set of change documents for the configuration with a creation date of 01/03/14.
    Any subsequent changes made using Order BoM result in the configuration being re-created with new documents.
    Is there IMG settings or user exits or anything else that could possibly be used to keep the original date or use the date from CU51 initial screen?

    Thank you for replies,
    I checked it, in CU41order BOM was selected, it was configured the fert materials in MRP 3 VIEW, was also assigned the relation in CS40.
    Still in CU51, I am not able to enter into sales order BOM. The error was - Order BOM processing not possible - owner MARC not allowed.
    Here I am having 10 FG variants and 1 KMAT material, during sales order creation KMAT material will be repleced by FG variant by variant matching.
    With respect to SD module TAN - item category was selected.
    What about TAC, is there any diiference.
    Or is it any settings I have to maintain.
    Regards,
    B C Gudageri

  • Order BOM process- material vairant for configurable assembly

    Hi,
    I am working on multi-level material variants with order BOM process. The configurable header material and assembly should be
    replaced by material variants after configuration is done. I configured the multi-level BOM explosion at sales order. After I configured the assembly, I executed type matching and a material variant for assembly was found. But the system didn't replace
    configurable assembly with material variant automatically and I couldn't find any functionality to carry out replacement. The header material was replaced by material variant in sales order entry. However, while I tried to carried out technical processing to
    create order BOM (CU51), the error message shows that I couldn't create order BOM due to the header material has been replaced
    with material variant. Does anyone have experience at multi-level material variants with order BOM process? Please kindly help.
    Thanks.
    B. Regards,
    Nancy

    Hi ,
    Could you pls explain the issue bit more clearly, As per my understanding you are using order BOM with variant configuration
    Is it correct ?
    Check the configuration profile settings (  CU41 ) , did you selected the order BOM radio button

  • Copy Order Bom in Two-Step Variant Configuration

    Dear Community,
    In Multilevel VC Order Bom Scenario. Configuration is made for the first level by sales department, then further levels are configurated by Technical Department.
    If the sales document is a quotation and then we want to create de sales order with reference to the quotation, only the configuration for the first level is getting copied. All the characteristics of the lower level configurable materials appear in blank, as well as selected class items in quotation as well as manually added components.
    Is there a way to copy the whole order bom of the original document or the characteristics value for every level?
    Thank you
    Sebastián Ligueros

    Hi Rahul,
    Basically , an order bom doesnot explode therefore you cannot configure any of the components.Please review note 303446
    By changing the default value of the variable GV_FORCE_BOM_EXPLOSION_ASL  in Include LCUKOFBE, you can force the  explosion of the order BOM in the sales order.As a result, subordinate items of the order BOM are configured provided that these items were not fixed.I
    Therefore please set this variable GV_FORCE_BOM_EXPLOSION_ASL to  X and retest,
    Thanks
    Amber

  • Sales order BOM configuration - CU51

    Hi,
    I am using with Variant configuration. I will be configuring the FERT into Sales Order for the characteristic.
    Then I tried for CU51 t code for BOM configuration (for adding or removing of materials for some special cases) in the sales order,
    But I am not able to do so, and I am getting an error as  -> Order BOM processing not possible - owner MARC not allowed
    In CHANGE CONFIGURATION PROFILE(CU42) for KMAT material I had given  -> Order BOM -> result oriented- in configuration parameters.
    Is there any settings is to be made
    Please your advices will be appreciated.
    Thank you.

    Thank you for replies,
    I checked it, in CU41order BOM was selected, it was configured the fert materials in MRP 3 VIEW, was also assigned the relation in CS40.
    Still in CU51, I am not able to enter into sales order BOM. The error was - Order BOM processing not possible - owner MARC not allowed.
    Here I am having 10 FG variants and 1 KMAT material, during sales order creation KMAT material will be repleced by FG variant by variant matching.
    With respect to SD module TAN - item category was selected.
    What about TAC, is there any diiference.
    Or is it any settings I have to maintain.
    Regards,
    B C Gudageri

  • Configuration Profile Order BOM/knowledge based setting

    We use Variant Configuration for some of our products.  I've noticed with newly created Config Profiles we are now getting the field Knowledge-Based Order BOM being selected automatically, even though we want to use Planned/Prod Order.  The odd thing is the "Order BOM" field is not selected, but Knowledge-Based is.  I'm suspecting this happened as a result of a Support Pack, but so far have not been able to get that verified from SAP.  Anyone ever have this issue?

    Hi Lynsley:
    The same situation happens in our system
    The thing is, when you donnot use "Order BOM", there is no related effects even though the “Knowledge-Based” is selected
    So you can ignore it and go on with your work.
    Best regards

  • Difference between varient configuration and super bom

    hi gurus
    i want to know the difference between varient configuration and super bom??
    i think as per my knowledge it is same.
    but my friend says  both are different.
    award points
    enjoy

    hi,
    Variant Configuration : You do not need to create a separate material for each variant of a product in your company. You can use one configurable material to cover all variants. You create a super BOM and a super routing for this material, containing all the components and operations for producing all variants of the product.
    Super BOM : The bill of material (BOM) of a configurable material contains all the components that are required to manufacture the material. The BOM contains components that are only used in specific variants (variant parts), as well as components that are used in all variants (non-variable parts).
    <b>This is why BOMs for configurable materials are known as super BOMs.</b>
    Thanks
    Sadhu Kishore

  • Sales order costing after changes on configuration or sales order BOM

    Hi all
    Our sales order items requruire an sales order costing. This is done automatically, when saving the sales order item:
    Settings in requirement class:
    - costing: X (costing required)
    - costing-ID: B (automatic costing and marking)
    This works perfect, means the sales order receives a caluculation that is marked.
    Now, something is changed on the sales order BOM with transaction CU51
    It seems, that each time you change the BOM you have to ensure yourself, that the costing of the sales order items (via VA02 -> extras -> costing) has to be performed manually.
    There is no SAP standard process, that does this automatically.
    Thanks for your feedback.
    Pius

    Dear Pius,
    System cannot take the changes from the BOM and execute the cost estimate automatically.
    Need to refresh system when the changes are happened i..e need to execute the Cost Estimate once again.
    Kind Regards
    Umapathi G

  • Transfer of changed order BOM from quotation to sales order

    Good morning!
    Please consider the following scenario involving variant configuration:
    A quotation is raised in the system, and the values of the characteristics are assigned. Therefore a order BOM is generated (for the quotation), and that order BOM is changed manually using tcode CU51 (for cost estimates purposes). When it is saved, the system updates the BOM in the quotation automatically (ok, this is a desired behavior).
    Although when we create an sales order with reference to that quotation, the newly chnaged order BOM is not copied to this new order, the order BOM is redetermined instead.
    How can I make the system to copy it from the quotation properly?
    Thanks in advance!
    Adriano Cardoso

    Thanks for the reply. I have verified this note and it seems more toward the BOM explosion in the sales documents themselves than for the modifications made afterwards (CU51 changes in BOM, for example).
    After realizing that, I´ve made a little research and found the Order Engineering Workbench possibility, which seems to fulfill all our requirements regarding this point. I looked all over SDN and haven't found too much input about it. In the SAP VC book, says it is not part of the SAP ERP, but a add-on.
    So, you don't happen to have any idea of how can we check if it is activated / installed  in our system or not? We are on version 5.0.
    Thanks!
    Adriano Cardoso

  • Sales order BOM is not reflecting in sales order

    Hi Guys,
    I have created a sales order in which all the items of the sales BOM (ex:A-a1,a2,a3).have been exploded.My strategy is make to order and i am dealing with valuated stock.
    Now i have created sales order BOM for that particular sales order thro cs61.I have made some changes in the item level (ex:A-a1,a4,a5) in the order BOM i want these changes to be reflected in my sales order is there any way to do so...
    RAMASWAMY

    Dear,
    You have to configure BOM explosion in VOV7 - item category settings - BOM area and you can specify whether it is a single level or multi level explosion etc., Depending on the configuration made here, the BOM explosion takes place in the order.
    Regards,
    R.Brahmankar

Maybe you are looking for