Varient Configuration prod order is not picking the super routing operation

Dear Experts,
In varient configuration,I have maintain Super routing and Super bom for KMET material.While creation of prod order or converting plan order to prod order,Routing is not getting selected.I have maintained dependency and have checked Production sheduling profile,order type and order dependent parameter,all is ok.Even the Super Bom is getting selected after MRP run as per my requirment.
What I am not getting is selection of routing for production order.Can any of the expert help to find the missing link.
Regards,
Rajesh Prasad.

Hi
For material Variant (FERT) production order Routing is not picking?Just check the Selection condition which is assigned to the operation is same as the selction of material variant i.e., Char & Char values has configured in MRP 3 View of Material variant.
Check this and revert back
Regards
Praveen

Similar Messages

Process Order is not picking the follow-up material

Hi Gurus,
We have changed a BOM by discontinuing a component and giving a follow-up material with the valid from dates as 18/5/09. and then MRP is run on that nignt ( mrp job set to run daily in the back ground). and on 19/05/09 a Process Order is created from the planned orders genereated by the MRP run.
now, we found that the new componenet (follow-up) is not copied into the process order, but the old compomemt (discontinued) is removed.
MRP parameters are correctly defined (Planning mode is set to 2) . Please let me know if we are missing anything.
Thanks,
N

Hi
Pl ensure that the Following requirements have been met before you can use the discontinuation functionality:
1) Both materials must be planned using MRP.
2) The base unit of measure of the follow-up material must be the same as the base unit of measure of the discontinued material.
3) You must enter discontinuation data for the discontinued item and follow-up data for the follow-up item.
and Also refer the SAP link for Complete Details
http://help.sap.com/saphelp_45b/helpdata/en/b1/c044d1439a11d189410000e829fbbd/content.htm
Regards
Brahmaji

Jin1 Condition type not picking the CSt in the ordre or billing.

We are in ecc 5.0 version.
When we create a sales order . the order is not picking the cst /lst from the record.
I ckecked all the confifuration, Pricing procedure, tax determanation, partner determiantion and all relavant posibilities everything seems to ok from the point of configuration. when we create a condition record. it is not linking to pricing procedure or tax determiantion procedure. the system tells condition record for jin1 not exists. message no 8. when we cross checked from client dev it is picking the record and we cross checked the conf in quality and production server all are same no deviation.
but when detailed observation in dev server which is picking the cst shows Application" S" , statistical and accdet key. but in quality or prod it shows "V" and other mentioned keys.
What may be the problem.
thanks.
ramchandra

Hi Ranchandra,
Kindly check the Tax codes in all servers,that tax codes are exits are not qulality and production server.
Needful answer kindly reward points.
Thanks&Regards
Vikram.M

Job executing the SSIS pkg via cmdExec line step not picking the config details

Job executing the SSIS pkg via cmdExec line step not picking the config details (of prod server connections/parameters)
specified in dtsConfig file and by default using the values present in the pkg (which is of dev env). I have to open the package
uncheck "Enable package configuration" save the package and check it again and save again then the package will use the prod config.
What could be the reason? and how to fix this?
The SSIS pkg and the dtsCofig reside in same folder of network drive.
SQL Server R2 Ent Ed
Thanks

Hi Ramzi24,
This is the by design behavior. The Dtexec utility will apply the default package configurations for the second time after applying the options specified in the command lines or other package configurations configured in the job step. In this way, as long
as the default package configurations file is valid, the configurations of it cannot be overwritten.
If the package is not deployed/installed, the Dtexec utility looks for the XML configurations file according to the file path defined in the Package Configurations Organizer window. In this situation, you need to either disable the package configurations or
modify the XML file path in the BIDS.
If the package is already deployed/installed, you need to modify the package as above or re-specify the install folder for the package configurations file.
Reference:
http://technet.microsoft.com/en-us/library/ms141682(v=sql.105).aspx
Regards,
Mike Yin
TechNet Community Support

File Adapter as Sender not picking the files

We configured the File Adapter as Sender, Transport Protocol =NSF and message protocol as FCC.
In OS we have folder to read the file, but SAP XI unable to read the file.
To trouble shoot this issue we copied that file into another location and reverted back to the same location then XI File adaptor is able to read the file.
Now we have compared the Attributes of the path
the only difference in file attributes
Coded character set ID . . . . . . . . :   819
CCSID 819 (decimal)
0333 (hex)
Name ISO 8859-1 ASCII
Description ISO 8859-1: Latin Alphabet Number 1Latin-1 countries and regions
Notes Related CCSID with euro is 923
able to read the file attributes:
Coded character set ID . . . . . . . . :   1252
CCSID 1252 (decimal)
04E4 (hex)
Name MS-WIN LATIN-1
SC Co-existence/Migration
FMS Subset
Registration Date
Description MS Windows, Latin-1
Notes CCSID for this code page with euro is 5348
We have tried to chage the File type as Text and File Encoding with ISO-8859-1even then its not picking the files.
Please suggest me where i am doing wrong here
Thanks,
Venkat.

Hi,
Check the file path & file name , Check the processing mode parameter which you have set?
Check the folder properties & provide all the permission ...
Finally check the communication channel status in RWB, If the problem persist try to stop & start the communication channel again..
Hope it helps...
Regards,
Kumar.

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

Report not picking the template

Hi all,
I built and registered a rtf template to an Oracle Report(print purchase orders), which is typically run
while approving a PO by selecting the check box (PRINT) in the Approve Documents Form. But Its not picking the
template instead it prints the XML Data. Do I need to call the template through the report trigger.
In other words, How to apply rtf template for the cocurrent report w/ short name, POXPPO? Please Help.
Thanks,
kalyan.
Edited by: kwin on May 21, 2010 6:22 AM

Hi
We had similar issue while submitting BI Publisher report from Shipping transaction form though report is associated with template and data defintion.
To fix we need to another setup through responsibility System Administration > Concurrent Programs > Define query for concurrent program choose update and go to onsite setting tab, In template choose template in LOV after it worked with out any issues. Try similary for this issue it might work. If this doesn't work create forms personalization on approving PO call that step where you can call plsql program, in plsql program you can call template use standard API's before submitting concurrent program
Let me know if this as worked
Thanks
Kamalakar.G

XI is not picking the file from source dir after exported from DEV to QA

Hi Experts,
We have moved one XI object from Dev to QA. It was working fine Dev but in QA XI system not picking the file from the source directory.
I have checked Communication Channel monitoring and receiver determiniation everything is fine. But still it is not picking the file.
Could you please help us.
Regards
Sowmya

Hi
We have used the CMS to transport XI objects. Everything has been configured automatically. I checked all the configuration and everthing seems to be fine.
Could you please give any more suggestions.
Regards
Sowmya

Query Designer is not picking the host:port

Dear All
We have installed BI 7.0 on Netweaver 2004s alongwith BI Java. When we run a query and execute it does not pick the hostname:port but come as
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSD_C03_Q009&VARIABLE_SCREEN=X&DUMMY=1
Please check i have activated all services in SICF and SMICM - all the services is running
and i have added the icm/hsotnamefull in the instance profile also.
is there any thing missing.
Whether PI/Xi is to be also installed and u think it is necessry to configure SLD?
regards
balaji

Japnese yen is maintained in units of 100. Check the entry in TCURX table for Yen. That is why the value is getting multiplied by 100 and getting displayed.
JPY (Japanese Yen) and others have a 0 in the TCURR-CURRDEC field which means 0 decumals. SAP applications will process amounts in these currencies by dividing the input value by 100 for storing in tables. Then, when being displayed, it will do a conversion exit and multiply the stored table value by 100 to show the correct amount.
SAP stores currency values in a data type that has a fixed interpretation of two decimal places. There are some currencies that do not work well with that setting. Usually that is because for some currencies , a fraction o the currency unit is meaningless. That is true of the Japanese Yen, the Turkish Lira, Korean Won and many other currencies whose value is often 10 US cents or less.
Here's a full explanation of the decimal issue in SAP. It is not just
limited to BW but is a system-wide situation.
1. By default there are two decimals on the data base, e.g. 123.45
2. When there is no corresponding entry in TCURX, these two decimals
are displayed in the query.
3. When there is an entry in TCURX, it determines the division factor
when reporting. (default = 2)
Example TCURX = NO ENTRY: Database entry = 123.45
There is no division
The above number is displayed as 123.45
Example TCURX = 3: Database entry = 123.45
There is a division by 10 (because 3 - 2 = 1).
The above number is displayed as 12.345.
example INR currency.
Example TCURX = 0 Database entry = 123.45
There is a division by 0.01 OR Multiplication by 100

TLB order are not picking all PO in APO

Hi Expert,
TLB order are not picking PO in APO.Order has missing PO.
for ex :
Ord 1 ; 10 lines with 20 qty of PO
Ord 2 : 5 lines with 20 qty of PO (here lines should be 10 instead of 5)
I appreciate your immediate response
Thanks
Vijay Job

Hi
I found the mistake. The address ( shift F5 ) in OX10 does not get transported in transport request , thought the plant gets copied from eg. client 100 to client 200.
So I manually entered the address for the target client eg 200 here, and then the dropdown list now shows all plants.
Thanks
kamala

Weblogic Server not picking the jar files in WEB-INF/lib folder

we are facing a strange problem where Weblogic App Server is not picking the jar files present inside the WEB-INF/lib folder if we update the jar file path in the classpath of the start script then the classes get loaded properly.
Is there any specific setting which I need to do in weblogic to pick these jars ?

Class loaders associated with a Web application can be configured to locate local classes first. To enable this we have to set the <prefer-web-inf-classes> to true in the deployment override weblogic.xml, for example
<container-descriptor>
<prefer-web-inf-classes>true</prefer-web-inf-classes>
</container-descriptor>
http://blog.transfer-solutions.com/2010/12/weblogic-class-loading/

Not picking the stock for the delivery

Dear friends,
Though the stock is available, it is not getting picked for the delivery.
Can you guide me what are the things I should check to solve the issue.
With regards,
Atul

Hi,
If the picking tab is grayed use T.Code LT03.( IF ware house management is activated).Here fill the ware house number and plant and mention the delivery note number also. Now use The T.Code TCode VL02N here u can see the system automatically picks the required quantity.
If the picking tab is not in gray mode mention the storage location and the plant correctly. Even though the system is not picking the quantity check the Picking location determination with rule MALA.and also check any open orders are crated for the particular material .
regards,
vas.
Message was edited by:
v.s.vas.

XML Publisher:Concurrent Prg not picking the RTF Template

Hi All,
We developed the rdf report and design the layout and we registred it.when we run the concurrent program program is not picking the RTF template.
We are using the Following version.
Oracle Apps 11.5.10
xml pub is 5.6.2
So please do the need ful, pleaseeeeeeee
Thanks & Regards
Leela

that suggests you haven't got the setup of the data definition and/or the layout template right.
Go into the XML Publisher administrator responsibility and select 'Data Definition'
You need to make sure that when you create the data definition it has the same code as the concurrent program short name and application. This is the connection between the two.
Having create the data definition, click on the 'Templates' tab and create a template. It should connect with the data Definition you have just created.
Now upload your layout template file.
If you have this right, then you will be able to see the layout template from the onsite setting tab.

Sender file adapter is not picking the file from windows server

Hi Experts,
We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters. It is not picking the files from windows directory and not showing any error.
In this scenario, input file for sender adapter is *.xml and no content conversion.
Could any one please let me know is there anything needs to changed in file adapter.
Thanks in advance,
Sridhar. M

Sridhar,
What do you have in the directory path?
If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
Regards,
---Satish

In downloading my Events from iPhoto on my Mac to my iPad Air, the Events arrive in the proper order but not showing the Key Photo. At the same time, the Events arrive in iPhoto on the iPad in totally random order but showing the Key Photo.Why?

In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?

HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
i tried to sort it out by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated.

Varient Configuration prod order is not picking the super routing operation

Similar Messages

Maybe you are looking for