Varient table update with changes in sap table

Hi,
is there any way with which i can update a varient table with the new values in sap standar table.
example can be, i created varient table T_TEST, its having 2 characterstic MAT_1 and MG_1,
MAT_1 is key field and is is having material number from mara , MG_1 is material group.
so can i update my varient table automaticaly each and every time a new material is created ?
while going through SAP help i come across
http://help.sap.com/saphelp_erp60_sp/helpdata/en/23/0be7d831cb11d2909c0000e8a49aad/content.htm
but its for transfering data from varient table to new database table , i want it other way round.
please reply if you did it in past.
Thanks
Best Regards
Edited by: Ritesh on Nov 4, 2010 10:00 PM

technical teams got the ways to do it , closing thread.

Similar Messages

Database not updating with changes from SQL*plus

Im having some issues with updating my database. I want to delete some rows in a table that has 323 records, so I run the SQL in SQL*Plus. It tells me that Ive deleted 222 rows. I then get a count of the number of rows in the table, and it tells me 101. But if I open another SQL*Plus window and get a row count, the original count (323) is what it says. The enterprise manager also tells me 323 records are in that table. Am I missing something here?

Aimee-
Until you 'commit' from the session you have issued the 'delete' statement, the other sessions will not be able to see the changes. In other words, the other sessions are getting you a read consistent view of the data.

Previews in Bridge CS5 not updating with changes in Photoshop CS5

The changes I make to a file in Photoshop are not updating in the same files previewed in Bridge. The Refresh button does not make a difference. Is this to do with Cache settings or some other Preferences perhaps?
How do I make my images in Bridge become accurate representations of my files being edited in Photoshop?

I am aware of the delay in writing the cache. It only took one stuffed-up rename to make sure I was aware of that in CS3 Bridge. I use many different camera bodies and have to sort the images into Date Created order to rename them. If Bridge hasn't finished reading all the EXIF data, the images will not be in the correct order and will rename out of order.
The xmp files are all created the first time I open the RAW files in ACR to do my edit. Prior to this, they don't exist, so if I see they exist, I don't need to check their creation date. This only changes if I am editing previously edited RAW files and I don't do that often. Once is usually enough when dealing with that many files.
There shouldn't be a problem with 10,000 RAW files as the cache is set to 50GB and Adobe shows this as 500,000 files. I know that is basically JPEG files. A corrupt cache is not the same thing as corrupt RAW files, and there are several copies of the RAW files anyway as a good back-up strategy requires.
Neither of my swap files/scratch pads are on RAID drives so I doubt this is the problem. I don't recall Bridge ever using more than 25% of the CPU Resources either. It's a 32-bit program anyway and probablky won't use all four cores of the Quad-core CPU...I might be wrong there, but I haven't noticed it doing so anyway.
My WPI figures were much higher when I was running a RAID0 Boot Disc, but one disc went belly-up and I decided against a RAID primary boot disc after that.
I'm sure that there are lots of people out there with lesser-spec'd computers who are not having the same problem. Equally, I'm sure that there are others out there with the same or similar problems. I'd like to hear from them about what they have done to eliminate the problem, or are we all doing work-arounds because Adobe haven't fixed a bug. I appreciate your attempts to help with this issue Curt, so don't feel that I'm simply dismissing your suggestions. I am hopeful though that someone who uses their system and CS5 in ways similar to me might have encountered and solved this issue.
Screen capture showing the Resource Monitor. Bridge going flat-out using only 7% of CPU and very little RAM. I have hardware rendering enabled.

App store apps won't update with changed account name...

I switched my account name about 3 months ago as the email that I was using as my account name I was going to get rid of. The switch over seemed fine and itunes accepted the editing of my account name. Now itunes will not allow me to update any apps that were purchased prior to the user name change for the account. I try to get apple to reset my password but I do not get anything via email with the reset instructions.
So what has happened since the change? I know I did not open a new account, merely edited the name on the account, but even if I opened a new account it still won't let me log into the old account or reset the password so now I am stuck with all these apps that need updating and there is nothing I can do.
Can anyone help??
Thanks

Hi - did you get an answer to this? I have the same problem.
Thanks

How can I make thunderbird update with changes I've made in my folders/

On another computer, I will delete adn file emails. When I get to my home computer, I have to restart TB to see these changes. Is there a refresh button?

No. I usually find just hopping from folder to folder does the trick. Or using F5 to force a fetch of messages from the server can force the display to update. You can use the Get New Mail button as well, but it tends to operate only on the account currently selected. There are add-ons to modify this behaviour.
I use some Saved Searches which suffer from this; one shows me only Unread messages, but when I've read a message, it remains in view although it's been read. Flipping to a different folder then coming back to the Unread folder usually sorts it out.

Classic scenario: Update shopping cart with changes in backend PO?

The Shopper would like to have visibility in their shopping cart (SRM 5.0, classic scenario) of changes made to the follow-on PO created in ECC6. Is it possible for the cart to be updated with changes made to the backend document, or would the customisation for this type of request be too complex?
Any advice would be appreciated, thanks!

Hi,
Yes this report is reading the PO quantity and value and the history tab for follow-on documents such as GR or invoice.
Thus the SC history is updated.
Kind regards,
Yann
Message was edited by:
Yann Bouillut

Profit center not updating with plant change

We have an issue with the profit center not updating with change in delivering plant.
A CSR entered a material on a sales order but the material is not extended to their location. They select a plant to deliver the material from. At this point the profit center fills in for that plant, from the material master.
The issue then is the material is not currently available at that plant so when the availability check is preformed the CSR checks for availability in another plant. They are able to find an available item at another location so they select that location.
When they save the sales order the plant reflects the new delivering plant, but the profit center still reflects the first selected plant. The profit center does not pull from the material master correctly.
Has anyone seen this issue before and developed a solution?

Hello Matthew
May be you have substitution defined in CO.
T codes 0KEM or 0KEL
See the following OSS notes:
167912 - Substitution call-up points for sales order/billing document
Hope this helps.

Quotation not updated with latest configuration prices

Hi Friends
Quotation is changed using FM-BAPI_CUSTOMERQUOTATION_CHANGE for updating configuration options with changed prices. But Quotation is not getting updated with changed prices, there is no error message thrown.....Please let me know how to fix this.
BR
Lavanya

Hi ,
are u doing the this step ?
The BAPI does not have a database. This means that the relevant application must leave the commit, in order that changes can be carried out on the database. The BAPI BAPI_TRANSACTION_COMMIT is available for this.
regards
Prabhu

Database table not updating with the changes

Hi friends,
                Iam having a tablecontrol where iam gettting the data from the ztable for a particular key field. When i change certain fields in the table control and when i click save, it should update the changes in the ztable.
   module save output.
   modify zslip_po1 from table x_po1_slip.
here slpno is the key field. if I change a field for a particular slpno it should update the changes for that slpno value only.
but it is not updating the changes. although iam setting the slpno field dynamically.
Please give me ideas.
thanks and regards
Murali Krishna T

Hi,
1. Have 2 Internal Tables, the first one must contain the original data(before change ) and the second one contains the update data(after changed ie. table control data).
2. loop the first table and read the data from the second table using index.
3. inside the loop, compare the work area of both the internal table.
   if both are same, then no change was made to that particular record, so no need for updation
   if both are not same, then some changes were made on that record, so need to update.
4. use modify command to update that particular record from the work area.
i think in performance wise also this logic will be helpful, since we are updating only the changed record.
since this is addon table, so i hope the no of records will also less, so no need to worry about loop.
check with this, it may work out......
thank you,
SenthilPandi C
Edited by: SenthilPandi ChandraSekaran on Feb 4, 2010 5:36 PM

Sales order purchase order field is updated with dots in data base table

HI
we have problem in Production when sale order created
P O date is update with dots and these dots we are unable to see at screen and data base table
we go t change mode of the order and delete the P O field with back space (button) and saving the order
when we see the change log of the order
there it is sowing
Old value = " . . "
New Value = " 00.00.0000"
Can any one give the suggetions to come out of this problem
This is we have noticed with only two customers
Thanks and regards
Kishore
Edited by: DevarapalliKK on Oct 23, 2010 8:43 PM
Edited by: DevarapalliKK on Oct 23, 2010 8:44 PM

Hi Kishore,
Two things could have happened:
1) Since this is happening with only two customers - I am sure it has got to do with some custom code on your system which is causing this problem. I 'd suggest you to create a new order with all the fields
2) It could be a bug with SAP- might want to check relevant SAP Notes. ( But this could not be a reason, if yes should have had the same prob with all cusotmers)
regards
sadhu kishore

CDHDR table entry updation with different Time Stamp

Hi Experts,
I'm changing the Contract Partner First Name. The time stamp updation in Change Document Object DEBI is with UTC but the BUPA_BUP Object with Local Time Stamp.
We want both time stamp with the UTC.
Time Zone mentioned at SPRO level is UTC.
Have anyone faced such situation earlier?
Thanks and Regards,
Jyoti Shankar

Jyothi,
I'm not sure whether this answers your query or not but suggest you to look at these 2 FMs'
BUS_CUA_VARI_FUNCTION_CONVERT
BUS_LOCATOR_OKCODE
Ist FM uses table TBZ4 that uses GUI.
Probably this is the reason you view object BUPA_BUP in the table with GUI time.
Rgds
Rajendra

How/When is table SRRELROLES updated with roletype BBP_TARGET

Hi
I am having an issue in method FILL_PO_INTERFACE which is in an implementation of BADI BBP_CREATE_PO_BACK.
I am using SAP std FM BBP_BW_SC_SELECT_1 to get the shopping cart ID and SC guid. I am having a problem because this FM sometimes returns back no values which is down to there being no PO value with role type 'BBP_TARGET' in table SRRELROLES (see code below).
select * from SRRELROLES
where objkey = Purchase Order*
and objtype = 'BUS2012'
with role type = 'BBP_TARGET'.
I have two queries.
1. Under what conditions does the SRRELROLES table get updated with the PO and shopping cart details for roletype 'BBP_TARGET'? Is it configuration? or another BADI i.e determine backend obects?
2. Is the table SRRELROLES updated before going into the BADI BBP_CREATE_PO_BACK.
Thanks for your help in advance.
Daniel

Hi
<u>Please go through this -></u>
<b>Note 798044 Correction for object links missing between SC and BE docs</b>
Note 504243 No deletion of the links when documents are deleted
Do let me know. Hope this will help.
Regards
- Atul

Update the change record in z table

Hi,
I am doing a module pool programming.If i change the particular record only changed record shd be updated in the z table.
How can i update only changed record in the database table in module pool.
Regards

Hi Rasheed,
Use this code to update ztable from the module pool table control, its working.
At screen flow logic
PROCESS BEFORE OUTPUT.
MODULE STATUS_8001.
LOOP WITH CONTROL TAB.
    MODULE PASS_DATA. "module to pass data into table control
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_8001.
LOOP WITH CONTROL TAB. "tab is the table control on the screen
    MODULE MODIFY_DATA. "module to modify data in internal table
ENDLOOP.
MODULE SAVE_DATA. "module to save the modified data into database table
Design a PF-Status with a SAVE button with function code 'SAVE'.
In PBO
MODULE STATUS_8001 OUTPUT.
SET PF-STATUS 'Z_TABCT'. "pf-status with appropiate buttons
* SET TITLEBAR 'xxx'.
DATA : LINE_COUNT TYPE I.
DESCRIBE TABLE ITAB
LINES LINE_COUNT.
TAB-LINES = LINE_COUNT + 3. "increment the line of table control dynamically so that table control becomes scrollable
ENDMODULE.                 " STATUS_8001 OUTPUT
MODULE PASS_DATA OUTPUT.
SORT ITAB.
READ TABLE ITAB INDEX TAB-CURRENT_LINE.
ENDMODULE.                 " PASS_DATA OUTPUT
In PAI
MODULE USER_COMMAND_8001 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'BACK'.
      LEAVE TO SCREEN 8000.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_8001 INPUT
MODULE MODIFY_DATA INPUT.
MODIFY ITAB INDEX TAB-CURRENT_LINE.
ENDMODULE.                 " MODIFY_DATA INPUT
MODULE SAVE_DATA INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'SAVE'.
      MODIFY ITAB INDEX TAB-CURRENT_LINE. "update modifed records
      UPDATE ZTABLE FROM TABLE ITAB. "update database table from internal table
ENDCASE.
ENDMODULE.                 " SAVE_DATA INPUT
Hope this solves your problem.
Thanks & Regards
Tarun Gambhir

Multiple Usage unchecked but shadow table still updated with IUUC_PROCESSED = 0

Hello,
We changed several MT_IDs by unchecking the Multiple Usage checkbox:
The OLI functions have been redesigned correctly and all Run Time Objects also. The IUUC_PROCESSED field is now conditioned to empty in the Abap statements:
*** get records from logging table
SELECT * FROM /1CADMC/00001360 CLIENT SPECIFIED
INTO TABLE _IT_IO_S_/1CADMC/00001360 UP TO I_NUM_OF_RECORDS ROWS
WHERE (_WC_S_/1CADMC/00001360)
AND IUUC_PROCESSED = ' '
ORDER BY
IUUC_PROCESSED
TABNAME
VARKEY
IUUC_SEQUENCE
%_HINTS MSSQLNT 'TABLE &TABLE& abindex(IUC), READCOMMITTED,READPAST'.
However the records in the table are still updated with IUUC_PROCESSED equals to 0:
We use DB6 09.07.0005 and ECC 6.0 with DMIS 2011_1_731 0004 SAPK-11604INDMIS DMIS 2011_1.
Any idea?
Regards,
Laurent

I have the "techie" answer for all of you. According to the tier 2 support at Norton Help Desk, the latest live update from Norton "utilizes Visual Studio 2012 which enables SSE2 instructions" and my processor can not handle that.
He said they are "working on a solution" and offered to reply back on Wednesday / Thursday this week if a solution could be found...

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1. I am not sure how to do it. SOmeone please help me out.

Hi ,
In your write back XML try the below query insert
INSERT INTO TABLE_XYZ (attribute1) values (SELECT CASE WHEN @{C1}=’Yes’ then 1 when @{C1}=’No’ then 0 else null end from dual)
Regards
Rajagopal

Varient table update with changes in sap table

Similar Messages

Maybe you are looking for