Varinat configuration copy of batch characteristics from Sale order to production batch

hi experts ,
below is the scenario :
the characteristics and its value which are maintained in the sale order must be copied to batch produced during process order GR .
it was not available in 4.7 but availbale in ECC 6.0 i guess by SAP.
i have created configured material with class type 300 and KMAT . have mainatined CU41 . created material variant and have filled MRP 3 fields.
have created material variant with class type 023 . (also tried with class type 300) .
created sale order for confgured material and item category is also correct . i do not get pop up for material variant which has same charcateristics as that of material configured.
also on after MRP run and process order creation w.r.t Sale order i did GR . but the batch was created with 023 class type and no characteristics were copied .
kindly guide , i have not worked much on variant configuration.
regards,
satish

Satish Yadav,
the problem start as you havent got pop up saying there exist a material variant with values you selected for configurable material in sales order, so please check settings related to item catagory.
Also as sales order is created for configurable material , for which material you run MRP?
check below link for more information on material variant and its replacement in sales order.
http://scn.sap.com/docs/DOC-31570
checka nd reply back, Hope it will solve your issue.
Thanks
Ritesh

Similar Messages

Assign batch number from sale order to production order automatic

Dear all, I have a question for all. Please help me in this case
My scenario is make to order
I have a sale order, when i create sale order, i have assigned batch number at each line item.
When i run MRP for sale order (MD50), the system generate a planned order for it and I've converted to production order.
So when I view production order, I think that batch number what I've assigned to sale order will be assign to production order but that is not happen.
So, can you help me solve this problem. I think that sap can assign batch number from sale order to production order automatic but i don't know how to configure that
Thanks all

Hi,
To the best of my knowledge, when system is generating planned order / production order from sales order system doesnt copy batch number from sales order.
In fact , you are following wrong practice for generating batch no.
Follow procedure like this :
Create sales order without any batch assigning there. Run MRP with MD50 and then convert planned order to Production Order.
While creation / releasing of Production order, you have option to generate batch automatically by following way :
Go to OPKP (Production Scheduling Profile) -> Take your plant & give suitable name to Production scheduling profile-> Batch Management tab -
> Automatic Batch creation in the order maintain this field as
1 Automatic batch creation at order creation
or
2 Autom. batch creation at order release
This will generate batch number automatically at the time of creation or release of order.
Then follow same process i.e. Goods Issue, Confirmation & GR for production order.
So you will get sales order stock in the form of batch managed.
Check & revert if any issue in above flow.
Regards,
Tejas

To get the configuration detials of a material from sales order

Hi Gurus,
I know we can get the configuration details of a material from Purchase order using function module 'ME_VAR_GET_CLASSIFICATION'. I need an equivalent function module for getting configuration details of a material from sales order. Is there any?...
thanks in advance...

Hi Gurus,
Myy probelm is solved. I used the same funcitton module ME_VAR_GET_CLASSIFICATION. wiht Material and configuration as the inputs. then i used table CABN to filter the hidden characteristics using the field ACTVE.
This link in SDN will be more useful. please try this.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/2007/09/12/classification+concept&showcomments=true

Transfer addition information from Sales Order to Production Order

Hi,
In MTO we need to transfer addition information from sales order to production order, such as OUTER DIAMETER and INNER DIAMETER of the product.
Regards,
Ahmed

Hi Ahmed,
Specific information from sales order in MTO process if you want to pass onto the production order then as suggested by expert production memo can be used.
Follow below steps.
Select the item in the sales order and Goto -> Item -> Text as displayed below
Create a production memo by specifying the language key as displayed below.
Once you create production order against the sales order - In production order you can see the text maintained. CO02-Menu Bar - Header -Production Memo
Thanks & Regards,
Ramagiri

Copy "Ship to party" from sales order to "Delivery addreess" in PO

Hi All,
when i create a Purchase Order in ref to the Purchase Requistion of the Sales Order, I want the Ship to Party address from line item of the Sales Order needs to get copied to the Purchase Order line item in "Delivery address" tab of the PO.
Please tell me the required configuration settings to achieve this.
Awaiting your responses.
Thanks in advance.
Rgds.
Anil.

Hi All,
This is a third party scenario. And in third party scenarios I guess the ship to party address from sales order will be automatically copied into the delivery address of the PO (Standard Functionality of SAP). But some how this is not happening and use to happen till the sixth week. Do I still need to check the enhancements given by the experts above? or we can achieve this with some configuration settings from schedule lines etc?
Rgds,
Anil.

Need to copy a custom field from sales order to billing document

Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
solved it myself ....
Regards.
Message was edited by: seshi
seshi

Hello,
Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
Hope this helps.

Copy from Sales Order to Production Order

Hi all,
Is there a way to copy direct a Sales Order to Production Order (probably for item with BOM).I am using SAP B1 2005
Thanks in Advance

Hello,
Currently you can choose relevant Sales Order from Production Order but only for information purpose.
I think you can try to use SDK to implement it.
Hope this helps.
Regards,
Maggie An
SAP Business One Forums Team

Transfer of requirements from sales order to production.

hi
how are the requirements transfered from sales order to MRP.
if a sales order is created how is the reqirement getting tranfered to MD04.
is it through requirement class and requirement type.

Hi Friend,
Basically the requirements are transfered based on the requirement types
Priority 1: Strategy group...Every strategy group is assigned with reqt type...depending on the strategy selected the assigned Requirement type is triggered and it will behave as per the configuration.
if Strategy group is not mentioned in material master then it will pick the requirement type which is assigned to Item Category group in sales Org 2 of material master.
if Item category group is not mentioned then it will look for MRP group.
Thanks
Satya

Copy variant characteristics from Sales Order/Item to Production Order

Dear All,
I have a requirement wherein I have to copy variant characteristics fromSales Order/Item to Production Order. In this regard I was looking at Enhancement "CLFM0002". Is it possible to copy the variant characteristics automatically from the Sales Order/Item to Production Order?
Thanks,
Pravat.

Pravant,
If you are implementing Variant Configuration, or using configurable material in that case you will have to maintain
Characteristics in CT04
Classes in CL02
Configuration Profile CU41
The material that you are mentioning must have class and charcteristics activated or mentioned in material master. undre classification view. In production you maintain Configurable material BOM we will be using the same material
Regards
Sathya

Copy the pricing conditions from Sales Order to Delivery

Hi all,
I have to send the princing conditions from the delivery trough Idoc.
That's the reason why I need the princing conditions in the delivery. But I can't redetermine the pricing procedure in the delivery creation. I need to copy the pricing conditions from order to delivery.
Because if there is any manual modification of a condition in the sales order, If I redeterminate the pricing procedure in the delivery, I would lost the changes.
Anybody knows any User Exit or anyway to copy the pricing conditions from SO to Delivery?
Thanks in advance

I think pricing will not determine in delivery, if any shipmentchanges will copy to delivery, not standard pricing.
Logically, when you create delivery by that time your pricing need to finsh, no changes, so send pricing infor from order to customer, as its standard process in any client.

Copying Crystal Report layout from Sales Order to Delivery etc

Good afternoon!
I have created a really lovely Sales Order layout in Crystal! It is the best!
Is there any way to copy this layout to a Delivery Note so it picks up the correct tables? I would love it
Thanks
OB

Open the report in Crystal Designer, select the menu option Set data source location.
In the top part, choose the table you need to change, then in the bottom bit find the table you want to replace it with and choose update. Do this with each of the tables you ned to change and they will update the source for you.
Other wise, import into SAP as a layout, the export as a Bip package. when you import it, choose it as a master layout and assign it to the forms you want to use it with and SAP will do the rest

Copying of Profitability segment from Sales Order to Purchase Order

Dear Edurado,
My requirement is in the sales order account assignment tab there is Profitability segment which is done by CO PA , the same PA segment must be automatically flow to Purchase order while creating the Po with ref to a sales order. Profitabilty segment is flowing but the fields like customer , Material is not flowing ,user must have to enter manully which he does not want.... i want all the field is Profilabbility segemnet of SO must be flow to PO while doing Po with ref to SO.
Regards
Abhi

Hi,
Try transaction code KE4IM, to map the MM condition types to COPA value fields.
Trust this helps much!
Cheers!

Reg.Stock transfer from Sale order into Production order

Dear All
We want to transfer the sale order stock in to production order.
What I have to do ? Pls help me.
Thanks
Rajakumar.K

Hi,
Could you please explain in details?
Other than the way of converting sale order stock which is the normal course of working, you can also consume the unrestricted stock to the production order which has a assignment to the sale order by manually changing the assigment of the material in the production order components. If you enter into the production order components u will be able to see a column called "Spec procurement" where in by default it will be '1' if the production order is w.r.t a sale order. Then proceed with material availability check.
Regards,
R.Brahmankar

Address not copied from Sales order/Delivery to Shipment Document

Hello Experts,
I need your help on Addrss of ship to in shipment document.
Sales Order[VA01] >> Delivery [Vl01N]>> Shipment [VT01N].
User changed the Address of ship to party (Header level) in Sales Order and It reflected to delivery as well and I believe It should also update the address in Shipment document.
But when I checked the Address of the Customer/Unloading point in Shipment Document [VT03N] (as below) I found It was not updated It was same as Customer Master Record and I believe It directly copied from Customer Master Record.
BUT While creating the Shipment system is copying the data from Customer master Record not from Sales Order /Delivery. Logically system should copy the updated address from Order/Delivery BUT It is directly copying from Customer Master i don't know where is the setting of this ??
Can anybody help me on this ? How system takes the customer (ship to party) address in shipment ? Where are the setting of these.
What I need to do so system take the updated address from Sales Order/Delivery not from Customer Master Record (Ship to party).
Can I change the address of customer in shipment document ??
Awaiting your precious reply.
Thanks,

Hello Samir,
Thanks for your response.
I think you get my question in wrong way.
I am sayingCustomer master data was not changed.
User just changed the Address in Order (Order > Header >> Partner tab >> Change ship to address/overwrite ship to address).
Overwritten Address / Updated address are copying in Delivery BUT not in Shipment document.
What I need to do? system should copy the updated address from Sales Order/Delivery BUT it is copying from Ship to party.
I hope this time i am clear to explain my issue.
Thanks,

Copy Net Value(VBAK-NETWR) from sales order to Delivery VL02N

Hi all,
Please can anyone help me with this? When the sales order is saved we need to move the net value to the any field in the delivery.
Thanks
Jasmeet

Hi,
This is a standard SAP functionality that values from sales order will be copied to billing and not to delivery.
In fact values from both sales order and delivery are copied to billing.
If you want to copy that you would need to copy the same in some empty field in the delivery document and that too with some BadI or user exit ZE_SHP_TAB_CUST_HEAD.
This user exit will create an additional tab in delivery header and you can copy the pricing value from sales order to any field in this tab.Developer can confirm the same.
Regards
Karan

Varinat configuration copy of batch characteristics from Sale order to production batch

Similar Messages

Maybe you are looking for