Various 8800 problems

Have read the various posts under 8800 and agree;
1.battery life is appalling - lasts a day with 30-60 min of call time and a few texts, back of phone is too fiddly to remove to bother changing batteries.
2.i also have a strip across the screen that is slightly altered where the screen saver time strip is, seems to be there on all backgrounds.
also
1.why under 'go to' on left hand button is there no option for inbox? it's been there on other nokias and is really useful
2.sound is very quiet, even on maximum
3.on answering a call whether it's by opening the case or pressing 'answer' with the case opened or closed, callers have complained of hearing a loud screeching noise - has anyone else had this problem?
so in summary, to quote a magazine review, the nokia 8800 is like a ferrari with the engine of a morris minor!
How could Nokia get a phone that is fairly expensive and supposedly a business phone so wrong.... one plus point though - i haven't managed to scratch the screen yet....!

Your battery could be faulty, get a replacement one and see if it performs better.
I think your screen has some damaged and it may have to be fixed.
You can customize the list of options shown in the Go To menu, consult you phone manual on how to do this.
You might want to try another phone with two speakers for better sound (like the 6233)
Regarding the sound callers hear, I think your phones microphone might have a problem.
You should take your phone to a Nokia Service Centre ASAP.

Similar Messages

IPhone 5 pixelated images in various apps problem- occurred within last 2 months and must be a result of apple network driver update

iPhone 5 pixelated images in various apps problem- occurred within last 2 months and must be a result of apple network driver update
What's the fix?
Tried reset, restart, reboot, reopen of apps same problem

What do you mean by reboot? Do you mean restore? Because if you haven't restored, then that's the next step. You'll need a computer with the latest version of iTunes and a USB connector.
For Mac:
http://support.apple.com/kb/PH12124
For PC:
http://support.apple.com/kb/PH12324

8800 problem

I have had my Nokia 8800 since September. It has recently started displaying the following problems:
-simply cutting out as though the battery is dead.
-returning the message "phone restricted" at times.
-returning the message "sim card registration failed" often.
-returning the message "insert sim card"
-at times it does not transmit my voice.
Is it the phone that is a problem or my sim card?

I have had the same problems with cutout. i sent it back to Nokia UK as I live in New Zealand now. they tested it and the batteries and said the batteries were fine. i sent it back again (at great trouble and expense) with a letter saying that it wasn't ok as the problem was still there. it cut out after 2 texts from full recharge so could they please fix it and use it for a couple of days before they sent it back to me so they could see the problem. They sent it back again saying it was ok and to buy another battery. Needless to say it wasn't. i have emailed them at nokia care and at the place it was "fixed" and they refuse to have anything more to do with the phone despite it being under warranty.
I have emailed various nokia people but no-one answers my emails and wants to help. now, of course, it is out of warranty. I feel really ripped off and angry at nokia for refusing to stand behind their warranty and their product. especially now I see that so many others have this problem.
does anyone know what I can do? its an expensive phone to just throw away. but its useless as it is.
thanks
Julia

Hang on restart and various other problems

Hi everyone,
I hope someone can shed some light on what's going on with my MacBook Pro. Since having purchased it in August 2006 (my previous Powerbook was stolen!) i've had the experienced the following issues:
1. The computer almost always hangs on restarts (not shutdowns). The restart does not seem to complete the final stage and a dim light remains at the front. In addition, i can hear the hard drive spinning
2. Sometimes when starting the machine (usually after hard shutdowns thanks to the first point) the computer does not boot up. Instead, it returns to a similar state as above: dim light, spinning hard drive, but no screen, no startup chime and i believe the CD drive doesn't spin up either.
3. The Above problem is only resolved by leaving the machine to rest for about 10 minutes. I have tried removing the battery, disconnecting and reconnecting the AC supply, resetting the PMU, holding down the reset PRAM buttons, but nothing works aside from leaving the machine for a while. Please note that this is not an overheating issue.. it happens when the machine is running relatively cool also.
4. Lately my MacBook Pro has begun to shutdown instead of hibernating when the battery runs low. I don't realise until i plug in the remains and press the power button when the keyboard wake doesn't do anything.
5. Over the last few weeks i've noticed the battery life deteriorating rapidly. Yesterday it gave me 15 minutes following a full charge!! I decided to put the battery in a fridge for a while and it seems to have helped, but something is seriously wrong here.
6. Having installed the Core Duo temperature monitor last night i noticed that the processor was running at 82 degrees centigrade at one point. While that may be normal, since that time it has generally run at between 50 and 60 degrees. I'll be keeping my eye on this one.
7. Previously i had trouble with the computer freezing, leaving me unable to move the cursor. Surprisingly, i was always able to escape from this by pressing the power button once. the cursor would then move again and i would cancel the shutdown. This problem seems to have fixed itself by resetting the PRAM a while ago.
8. Lastly, and probably unrelated to the above, the CD drive sometimes sounds as though it is rubbing against a casing while spinning and the noise can be a bit distracting. Also, i have noticed that if i move the machine while burning CDs the burn will fail. I don't put a great deal of pressure on the area around the CD drive and it seems a bit sensitive to me.
Other info:
I have reinstalled the OS twice and the problems are still there.
I have reset the PMU and PRAM more times than i can remember.
The laptop has receied no blows or other damage and the problems have existed since purchase
I Installed Bootcamp at purchase (needed Windows for some accountancy software) and thought that the problems might be related to this, bit have since removed it various times and finally decided to remove it permanently recently. I reformatted the whole drive, did a fresh install reset the PMU and PRAM (again!) and downloaded all updates from apple. The problems remain. :S
Help! I absolutely love my macs... i just wish this one would work right!
Thanks in advance for your observations/advice.
Andy
MacBook Pro Mac OS X (10.4.8) 2.16Ghz 2Gb RAM

Any idea what piece of hardware might be at fault?
No… although these types of issues are usually logic board related when it is determined to be hardware.
Am i right in thinking this?
Yes, you can take it into any Apple Store/Service Centre in the US, and worldwide, and have it repaired.

IPad 2 won't get past apple logo and various other problems...

I knew I shouldn't have updated to iOS 8, my iPad was getting increasingly slower with each software update since I bought it a few years ago.
A few weeks ago the first problem arose - the home button suddenly became unresponsive. Initially it would work on about 1 in 10 clicks, but then nothing at all. I managed to get to settings to turn on accessibility features and the gestures to replace the home button so that wasn't much of problem, just annoying. I tried various things online that people claimed fixed this issue but nothing happened.
Then about a week ago it suddenly wouldn't wake up in the morning. I tried turning it on and it would get to the apple logo and stay there for a couple of minutes then go black again. I plugged it into iTunes and restored it etc hoping something would happen but of course nothing did.
And I obviously can't reset it on the device itself due to the home button being completely dead.
I left it for a few days then today I came back to it and tried to plug it into iTunes again and now iTunes won't recognise that it's plugged into my macbook at all.
Basically does anyone have any advice or should I just accept that it's dead at this stage and give up? Let me down gently!

Hi there SraZamora,
The troubouleshooting steps in the article below can be helpful when troubleshooting unresponsive devices.
iOS: Not responding or does not turn on
-Griff W.

Windows 8.1 - various Skype problems

My first post, I can't find a solution for these problems, hopefully someone can help.
I've been helping a friend with her Windows 8.1 PC and various issues she has had with it.
The one area that seems to be a persistent issue is using Skype.
The issues is that when she receives a call there are sometimes one, sometimes two Answer / Answer with Video / Decline sets of buttons. When clinking Answer the ringing tone continues although she can then be talking to the caller. Even when the visible Skype has been closed the ringing continues - though there's then a Skype icon in the System Tray which can't be closed, or anything else done with it. The only way to stop the ringing is to go to Administration / Services and Stop the Skype process - not ideal.
There are other Skype issues seemingly related to two Skypes running. She's often said to me that it always looks as if there are two Skypes running.
Although the Skype integration with her Hotmail has been removed, and her Skype account disconnected both from her Hotmail & Facebook accounts, the problem persists.
The PC is set up so that that old style desktop is in use virtually all of the time. Skype 6.21 is installed on that desktop. There is no Skype visible on the Widows 8.1 Start screen nor in the Apps list there. At one time Skype 'modern' was installed but that was uninstalled. The only Skype in Control Panel/Programs is Skype 6.21. I seem to recall reading that Win 8 'Modern' Apps don't appear in that list. In which case where is V.3.1 (see later) coming from?
I ran Belarc Advisor on it and it shows 3 Skype entries in the Software Versions & Usage section:
Skype - Skype Version 3.1.1005
Skype Technologies - Skype Updater Service Version 6.8
Skype Technologies - Skype Version 6.21
So Belarc is reporting 2 Skypes (I've ignored the Updater as that is presumably associated with 6.21). I've no idea where V.3.1 is, what its effect is or might be, I can see no reason - apart from historical - for it to be showing.
Is Belarc mis-reporting V.3.1?
Is there a remnant of V.3.1 that's causing the problem?
I've installed Revo Uninstaller but it only shows V.6.21.
How can I completely dispose of V.3.1?
Whether or not this is the problem I don't know, but clearly I have to deal with the problems that I can see and eliminate everything possible.
Any thoughts on how to progress?
Many thanks for taking the time to read this far, I realise I probably haven't written a very clear post but hopefully there's enough sense in to give the picture and, hopefully, help someone to point me in the right direction to resolve the issue.

Please try these steps:
Reducing simultaneous connections for incorrectly configured servers
https://wiki.filezilla-project.org/Using#Reducing_simultaneous_connections_for_incorrectly_configured_servers
Make sure that you close connection as soon as you are done with them, as some ftp clients will generally leave their connection open unless told otherwise. Additionally, some clients such as Filezilla will allow multiple connections for any new activity,
which uses up connections quickly. While this does make for faster transfers.
I use mostly Cute FTP and I have been sometimes doing it to just close ftp software (Alt+F4) and not closing connection; but the point is that when you have been connected then you must close connection properly as well.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Various Photoshop problems (streaks, updates, zoom function)

Hello there,
since i switched from Mac to PC, i am encountering various Problems with my Version of Photoshop CS6.
I am working on a i7 Mac, 32 GB Ram, Asus Sabertooth x79 Board and a GeForce 660 Card.
Rightnow the biggest problem i am experiencing is this one:
This is what pictures randomly look like when i am reopening them after saving.
I have no idea where this comes from. Its happing with Pictures i shot with my Leica S2 and my Nikon D800E.
Second Problem (no longer a porblem, got this one fixed):
I am not able to update Photoshop
Error code: U44M2P7
Third Problem:
Once i am using the magnifier in Photoshop the pictures window will resize. This can be pretty annoying. I have both options turned off, means it should not resize. Its working perfectly on my iMac.
Thanks for helping,
Nick

Yes, you can get similar patterns from RAM or VRAM failures.
If other applications that use OpenGL show similar problems, then you may need to replace the video card or RAM.
IIRC that update error is because the updater can't find some components - as if they'd been deleted or moved since Photoshop was installed. The usual solution to that is to reinstall 13.0 then reapply the updates.
(and yes, I wish the updater/installer provided more useful error messages)

Production Premium Causing Various Computer Problems

I recently installed Adobe Production Premium CS5 on my iMac. Ever since doing so, all of my other programs (including Safari, Skype, DVD player, and various others) randomly close. My computer randomly shuts off and logs me out, and sometimes doesn’t even make it to the desktop upon startup. The only programs that are not currently malfunctioning are the Adobe programs. I believe that these problems are being caused by the installation of the software. I’ve updated my RAM and all the hardware to Adobe's recommended settings. Is there any way I can stop this? It’s getting really frustrating (I had to reopen Safari three times just to type this).

Manually delete the caps.db in the caps folder:
Important Directories
Bob does have a point, though. Installing and using CS3 on Win8 is going to be all sorts of trouble, regardless.
Mylenium

IBook Can't See HD/Various HD Problems/Various Install Problems

My iBook started having problems with the HD a while ago, since it was out of warranty, I decided to replace it myself. This worked for a while but then my iBook wouldn't boot from it anymore. I put it away for a while (already have my iMac and Eee PC) until I decided to work on it recently.
First, I replaced the HD again but still had various problems (don't remember exactly what). I ran various disk utility programs and would always have problems with the drive (which has been replaced twice now).
Right now I'm trying to work on it again since I'd really like to get this working. I bought another HD (after returning the previous) along with a new (used) ribbon cable off ifixit.com. At first my iBook saw the drive and booted off the OS X Install DVD. So far so good while I'm installing until the install fails and brings up the logs and I/O errors.
I try again and the same thing. Right now I tried formatting the drive again, but after a restart Disk Utility shows my drive with the volume titled "disk0s3" in grey lettering (this happened several times before). Trying to repair the drive brings up the error "The underlying task reported failure on exit" with the small log showing "Invalid B-tree node size / Volume check failed", although the SMART status says verified. I can format the drive and it passes Verify Drive and Repair Drive fine.
Although at this point I'm sure none of these specifics are relevant, since it's impossible for it to be the HD. Is it possible there's some underlying problem internally that's causing my iBook to incorrectly handle a hard drive?

Sorry to be the bearer of such sad news. You might especially review the post by spudnuty in that thread, as it does mention the possibility of a soldering failure which could possibly be repaired by a specialist. I have no idea if this is feasible or what it might cost, but when my logic board had problems, I sent it off for a $75 reball and it came back and has been working perfectly ever since. Here's where I sent it.
http://www.superiorreball.com/
If you really love this computer, it may be worth a call to Dale at Superior and ask if this is something that is fixable and what it might cost.
The other alternative is just to plan to boot from an external drive, which does not involve the ATA bus used for the internal drive. This is likely worth doing as it's always good to have a spare computer, even if it isn't quite as portable as it used to be.
Happy Computing!

Various Lion problems

I bought a new MBP after Christmas loaded with Lion. I transferred all my files from my older MBP and started to work. I bought the Thunderbolt to VGA adapter to use with a second monitor. Various problems have occurred. None are fatal. All are annoying.
1) Occasionally the second monitor blanks out. It goes black for several seconds, then returns. Usually, I am playing Zuma's revenge.
2) Spotlight has gone crazy. When I click on Show all in Finder, I get what looks like half the files in the computer. The option to show only Filenames makes no difference. I have gone to preferences and selected only a few items to show, but it shows email contents, which I don't want, and tons of irrelevant files.
3) Occassionally, the computer will not accept clicks on windows. It will not respond to cmd-W to close a window. Frequently, I have to use the Activity Monitor to quit a stuck application.
4) Use Seamonkey as my browser and email client. It will freeze occasionally.
5) The gestures don't work half the time. Sometimes I get a gesture I didn't ask for. I am sure my very dry fingers don't trigger things consistently, but this is behavior makes most gestures useless.
When these hassles are not acting up (about 95% of the time), the computer is a joy to use.
I'll stop here. Looks like Lion needs a round of upgrades.

No.
(60415)

Major 8800 Problems

2 things I need to seek advice on here.
I bought my 8800 in Spain not long after they were first released this year. Having used the phone for about 3 months, one day it just packed up entirely.
I returned the phone to the shop it was bought from and they sent it off to the service centre for Spain at the beginning of August. As of today, I STILL don't have the phone back.
The shop tells me that it’s a software issue and the service centre doesn't have the "old" software and will not be getting the new versions until at least December.
I would be a little less peeved if I felt it was just my phone, but the shop is telling me that they currently have over twenty 8800's at the service centre all with similar issues, and they only sold 30 of the phones to start with!
So, does anyone out there know of long standing issues with the 8800's software and (at the risk of being moderated and shut down) what is the problem with the Spanish service centre? I'm told they are not Nokia, just a franchise, and they are a complete waste of time for any warranty problems that come up with Nokia's. Even to the point of refusing to fix other EU phones, which by law must be covered for warranty anywhere in the EU if bought in the EU.
Thanks......one VERY dissatisfied customer, who is just about to buy the new Chocolate, rather than upgrade his 8800.

Have you ever actually told Nokia about this - I mean have you called Nokia Spain and not just the service centre?
All those who believe in psychokinesis raise my hand.

ITunes 10.3.1 Freezes when I plug in iPhone, various other problems

I've had loads of problems with iTunes, Windows 7, and my iPhone 4 which I got in february (along with the iPod Touchs I've owned in the past.)
Today, my problem is this. Every time I open itunes, it opens fine, and everything is okay. But when I plug in my iPhone 4, things stop working. One of the following things will happen:
A) iTunes will completely stop responding for 3+ minutes, until it finally gives up trying to find the iPhone. Even if my iPhone is still plugged in, iTunes wont recognize that it's plugged in and acts like nothing is plugged in. My iPhone does not sync, and it acts as if it's plugged into a wall charging port.
B) iTunes freezes for a second, then asks me to either restore a backup of my iPhone (deleting everything on my iPhone since all the backups seem to be from ages ago), or start as a new iPhone. I click start as a new iPhone, and it tries to make a backup, and for some reason it says that my iPhone 4 (32 gig capacity) only has 4 gigs TOTAL space on it, and then when the backup finally finishes, iTunes will freeze up and I have to close it down.
I've tried everything to fix these garbage issues that no one should be having (I've been having these issues since before 10.3), but nothing has worked. I've reinstalled iTunes, restarted my computer, restored the device to factory settings, updated the device via Device Manager, nothing works.
If anyone has a fix so that I can sync my iPhone at all (let alone in a fast manner, which I've NEVER been able to do), I'll be a little less inclined to ditch my iPhone ASAP.
Specs:
iPhone 4 32 gig
iTunes 10.3.1
Windows 7 Professional 64 Bit
Intel Core i7 CPU Processor 860 @ 2.8 GHz
NVIDIA GeForce 9800 GTX+ Graphics Card
4 gigs RAM
300 gig hard drive (108 gigs space left on it).

I have the same issue. I took it the genius bar and called talked to tier 2 phone support. They have standard thing where you uninstall all apple software in a certain order and then reinstall 64bit itunes. That did nothing (tried it 4 times).
I've gotten two clues so far.
One is that at the store if I plug someone else's iphone 4 in then itunes acts the same way. So it is not the phone. Two is tier 2 phone support told me to try syncing it with a fresh user account (an admin one). I did that and itunes was just fine, it did not freeze.
So there appears to be some conflict with the software, music files, whatever that is on my current user account (also an admin account). I ran virus and malware detectors and found nothing. Now I'm going to try putting my music, movies, apps, etc in the new user account and see if the phone will sync then.
I know its not much but thats where I'm at. I hope it helps.

Various iWeb Problems

I've done a good amount of reading on the forums and am still not able to determine a solution to the problems I am having. Here are the details.
I am trying to create a site to show off family photos, of which we have over 1000. I have things broke up by year and event and there is only a couple events with over 100 photos. I have all the photos in iPhoto broke down by events.
Using iPhoto I select the iWeb to photo page option and the page gets created in iWeb, there has never been a problem with this step.
After creating about four pages I usually select Save. This has varying results that breaks down like this.
1.Save actually works
2.Goes through the motion of saving but after selecting quit I get prompted to save again. Selecting save does nothing. Selecting do not save, expecting application to quit, does nothing.
3.The saving indicator never comes up.
Besides number one, the end result is I have to force quit iWeb and all my work is gone. Leaving it sit there for any length of time does not change the results.
If I am lucky enough to get a good save and want to publish to my .mac account, I can get a combination of these results.
1.It works
2.iWeb hangs at logging into .Mac account. Clicking Cancel does nothing. Usually ends in Force Quit.
3.After selecting publish nothing happens. No indicator that it is logging into my .mac account or anything. Selecting the File menu, most of the options are grayed out. It would appear that iWeb thinks it is doing something, but it is not. No amount of time helps the situation. Normally ends in a force quit or iWeb telling me if I quit I will lose all my work. See number two above.
4.iWeb reports it is uploading to .mac account but after things are done, nothing happens. I do not see the time indicator next to my site in the left hand page pane. Circle of force quit, not able to save, and losing work begins.
I have tried reinstalling iWeb and starting with a fresh domain file, both resulted in no change. Odd thing is, when I was demoing the .mac service I had no problems. Once I converted my account and starting using my personal domain things went crazy. I do not think that is the root cause of the problem, just more of an observation.
I did not use the previous version of iWeb so there are no conversion problems there. iWeb is updated to 2.0.1, the problems existed both before and after the update. Using the iPhoto web gallery produces the same problem in iWeb. Saving to a local folder appears to work 100% of the time but it could be I have not tested this option enough. I am using the darkroom template but have had problems with the other templates also.
So, any thoughts?
Also a question, other than removing the domain file, the iWeb application, and reinstalling the iWeb application, are the other files that have to be removed to get a clean install of iWeb?

I'm having pretty close to the same problems. However, I can't even save a project I am working on. Save, export, export to .Mac - none of these work. It just hangs and I get the spinning color wheel.
After trying to get it to work for the last couple days, I finally gave up. If someone has a great solution, I will give it a try. Otherwise, I will just delete iWeb from my system and keep using other programs that don't give me so much trouble.

Various Site Problems

http://jobs.oracle.com/
Code is as follows:

<HTML>
<BODY>
<title>HTML META tag refresh</title>
<meta http-equiv="Refresh" content="0;url=http:/jol_ext-jolap-dad/plsql/jol_www_pages_pkg.jol_intro">
</head>
</html>
Seven lines of code total, containing four problems ... not a great impression.
1. Comment contains &copy ... html character codes aren't necessary in a comment, and even if they were, it's missing the terminating semicolon to make it valid.
2. First tag after <html> is <body>, when it should be <head>
3. The content of the meta refresh lists the URL as http:/jol_... I'm not sure where to start with this one. It should either be a relative URL (i.e. url=/jol_ext-...) or an absolute URL (i.e. http://jobs.oracle.com/jol_ext-...). This is some horrible attempt to do both, and ends up doing neither.
4. The second to last tag is </head>. While this is half correct, since the meta tag should precede the closing </head> tag, there is no corresponding opening <head> tag, so the tags are mismatched. According to the order in which tags were opened, this "should" be </body> (which would also be wrong, for a different reason.
[5. This isn't really an error, but a nitpick. An http response code 301 should probably be used in this situation instead of a crappy <meta> refresh. Or, even better, just put the actual content in the web site root directory ... no redirect needed. If you do insist on using a meta redirect, the title of the page should probably be something more display-friendly, such as "Redirecting, please wait," instead of a low-level implementation-specific note.]
Then, when I went to report this problem, naturally I go to www.oracle.com -> Contact us, to find a "site feedback" link. As others have pointed out before [ http://forums.oracle.com/forums/thread.jspa?messageID=1735536 ], no such link exists. However, in visiting the "Contact Us" page, an HTTP authentication message appears for login.oracle.com. I tracked this down to the "image" /corporate/contact/dotted_horizontal.gif ... which actually results in an HTTP 302 temporarily moved message, redirecting the browser to https://login.oracle.com/pls/orasso/orasso.wwsso_app_admin.ls_login?site2pstoretoken=v1.2~5426~A2B7981364[...]
This is further complicated by the fact that [apparently] this page prompts Opera for http authentication, and loads a regular web page for Firefox and Internet Explorer. Regardless, it's at least slightly broken (probably in at least two ways).
For being "the information company," Oracle really needs to work on how their information is presented.

Thanks. I googled for oracle site feedback, and this was the closest I could find.
I was a little curious, so I investigated further on the http authentication point.
I simulated the HTTPS session, and discovered that, in fact, the server did respond differently based on the User-Agent string (ugh, browser discrimination ... one of my big pet peeves). When I used the User-Agent string from Internet Explorer 6 (Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30)), the server responded with a 302 Moved Temporarily page. However, when I used the Opera User-Agent string (or a made-up string) (Opera/9.20 (Windows NT 5.1; U; en)), the server responded with a 401 Unauthorized HTTP response (and WWW-Authenticate: BASIC realm="Single Sign-On").

ALV sum various columns problem

Hi all,
I'm doing a report on ABAP for a timesheet of the current month. The output i want is similar to this:
Year      Month     Type         Item       #days tue-1      wed-2    thu-3 ...
2009     September Project    Project1      3        1        1          1
2009     September Project    Projec2       5        1        1          0
2009     September Task       Task1         1        0        1          0
The field #days is a sum of all the days columns for september next right to the #days column.
I can have an SQL wich can extract all the data to fill year,month,type,item and #days. But then, i need to flat these #days in the correct days column. I think i can do it with 2 sqls, but then i need to join these data to display it right.
Finally, present that data in an ALV.
I have a structure defined in ABAP dictionary with all the static fields. The columns representing the days (sat-1,sun-2,...) are not in the structure.
I've tried to define a new structure wich include the old one and define the remaining columns, but i can't show the fields defined in this extra structure, only the static fields defined in ABAP dictionary.
This is probably simple, but i'm just starting in ABAP, and this seems odd and confusing right now.
What's your advice to solve this problem?

Hi,
The question is not very clear but, u can try this.
while populating the field catalog try using
set_column_name,
set_short_text,
set_medium_text,
set_long_text for the extra fileds added.
if possible make it clear what exactly r u using asin, the reuse alv's or oo alv's or object alv's.

Various 8800 problems

Similar Messages

Maybe you are looking for