Various errors on self-monitoring (non-Prod) evironment

Hi all, i do have few issues that i see on the app srv log for PPM, any idea whats causing this errors:
- Component Performance metric calculations may be inaccurate or incomplete (usually getting this)
- Errors in AppServ log "Communication to Monitor Servlet failed" (always)
- Component objects not fully cached (rarely)
- No Component PeopleCode trace information (always)
I do get data populated in current and history tbls for PPM.
thanks

thx for the reply Nicolas
answers to your questions;
Peopletools version, ;8.48
database used (with version), Oracle 9i
OS (with version) :GENERIC (All Platforms)
what configuration setting has been done or not: its a self monitoring PPM setup
proper extract from your appserver/webserver log would be useful: im working on getting that from the customer
let me know your thoughts...

Similar Messages

Self-Monitoring solman SP16 error

Hi gurus,
I need your help with Solution Manager Diagnostic configuration. I installed Solution Mananger 7.0 SP16 with Willy Introscope 7.2 and SMD in solution Manager.
When I run the wizard for Diagnostics Setup --> Managed Systems --> Managed Systems for Self-Monitoring (solman) I've this error and I understand this problem.
Wilyhost Agent configuration finished without errors, but on Enterprise Manager (host01:6000) no Wilyhost Agent was detected from host host01. Please check the log file jvm_smdagent.out whether the Wilyhost Agent could connect to the Enterprise Manager. If the Enterprise Manager configuration has been changed recently please restart the SMD Agent on OS level.
Step Wilyhost Agent Details
Created destination SM1_DVEBMGS00_server0
Created destination SM1|host01_SM1_00
Created action SAP GC|SM1_DVEBMGS00_server0 - SAP GC|SM1_DVEBMGS00_server0
Created action SM1 - SM1 AbapSystem
Created action SM1|host01_SM1_00 - SM1|host01_SM1_00 AbapInstance
Created 3 action(s).
0 Wilyhost Agent(s) and 0 EP Agent(s) from host host01 are connected to the EM.
Wilyhost Agent configuration finished without errors, but on Enterprise Manager (host01:6000) no Wilyhost Agent was detected from host host01. Please check the log file jvm_smdagent.out whether the Wilyhost Agent could connect to the Enterprise Manager. If the Enterprise Manager configuration has been changed recently please restart the SMD Agent on OS level.
Please, can someone helpme for this error. Any suggest is welcome.
Regards,
Sergio.

Hi:
Try to walk through this configuration guide, it may help you.
/people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
Regards,
Federico

Scom monitoring non domain computers

hello experts
i have scom 2012 and want to monitor non domain computers (servers in dmz)
i have created new template in ca server then create new certificates for dmz server and scom rms server.
now i have connection between two servers but there is an authentication error.
hear are logs.
please help
log from dmz computer
Log Name: Operations Manager
Source: OpsMgr Connector
Date: 29/09/2014 10:54:51
Event ID: 20071
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SRV-AB-WWW1.somebank.am
Description:
The OpsMgr Connector connected to scom.somebank.am
, but the connection was closed immediately without authentication taking place. The most likely cause of this error is a failure to authenticate either this agent or the server . Check the event log on the server and on the agent for events which
indicate a failure to authenticate.
Event Xml:
<Event xmlns="">
<System>
<Provider Name="OpsMgr Connector" />
<EventID Qualifiers="49152">20071</
EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-09-29T06:54:51.000000000Z" />
<EventRecordID>2163</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>SRV-AB-WWW1.somebank.am</Computer>
<Security />
</System>
<EventData>
<Data>scom.somebank.am</Data>
</EventData>
</Event>
scom rms computer
Log Name: Operations Manager
Source: OpsMgr Connector
Date: 29/09/2014 11:18:57
Event ID: 21010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SRV-SCOM1.somebank.local
Description:
The OpsMgr Connector negotiated the use of mutual authentication with 192.168.169.40:53552, but Active Directory is not available and no certificate is installed. A connection cannot be established.
Event Xml:
<Event xmlns="">
<System>
<Provider Name="OpsMgr Connector" />
<EventID Qualifiers="49152">21010</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-09-29T07:18:57.000000000Z" />
<EventRecordID>1269145</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>SRV-SCOM1.somebank.local</Computer>
<Security />
</System>
<EventData>
<Data>192.168.169.40:53552</Data>
</EventData>
</Event>
telnet to 5723 port from dmz server to scom rms server is ok

PS C:\Users\administrator.AMERIABANK> C:\Users\administrator.AMERIABANK\Desktop\1.ps1
This script will inspect Local Machine certificate
store and registry settings. This will take several seconds...
Script will check certificates to match the following requirements:
        Subject equals computer FQDN
        Certificate is time valid
        Certificate has private key and it supposed for computer certificate
        KeySpec is set to 1
        Certificate Application Policies (in former EKU) contains both Server and Client Authentication
WARNING: OpsMgr Agent is already configured to work with certificate, but this certificate don't exist in
WARNING: LocalComputer store or not match all certificate requirements.
To resolve this issue, obtain new certificate from trusted Certification Authority
using the following instructions: http://en-us.sysadmins.lv/Lists/Posts/Post.aspx?ID=5
and install it by running the following command: MOMCertImport /Subject SRV-SCOM1.ameriabank.local

Grid Control : Change Management Across Non-Prod and Prod

All,
I had some questions with regards to Grid Control Implementation Architechture on Prod and Non-Prod Env's
The best practice is to configure a production Grid Control (GC) environment to monitor only production targets. This prevents nonproduction targets from adversely impacting a production environment.Another issue could be the compliance policy where in the production systems are to be isolated from Non-Production Environments.
If this is the case then we have to have 2 GC environments , 1 for Prod and 1 for Non-Prod. In such a scenario how well can we do change management (Version control ) across the Non-Prod and Prod Environments ?
To be more specific
How is version control managed for Oracle builds if we have separate GC for Prod and Non-PROD? (Change Management pack / Configuration Management Packs are there but what is the real depth of these? )
Change management for the Oracle Environments from DEV -> Test -> Pre-Production-> Production? We aim to have consist build across the environments can we achieve this if the GC is managed by Different OMS/OMR and if we have 2 separate environments how do we sync the GC environments managing PROD/NON-PROD after a change?

This is feature is not there in 10.2
This situation can be avoid by chagning the 9i port to 1522
or install the GC on diffrent box

Issues with clone of database from PROD to non-prod

Hi All,
I am trying to clone the production database to a non-prod database.This used to work fine with out any issues before.Only change made on the backup side is we change the compress option to nocompress.Below are the steps followed for the clone process.
Create a new init parameter file.
Started the database in nomoutn state
Connected to prod database through rman
connected to auxiliary database(non-prod)
connected to catalog
Set the new file destinations in ASM for the non-prod database.
Set the recovery time until the last SCN on the full backup.
Here is the error encountered during the process of restore.
ORA-19870: error reading backup piece /exp/prod_backup/emrepdb_0_PROD_20101114_ublt0vq6_1_1
ORA-19502: write error on file "+STG_DATA/stage/datafile/undotbs3.dbf", blockno 2641537 (blocksize=8192)
ORA-27061: waiting for async I/Os failed
Outer dbms_backup_restore.restoreCancel() failed
ORA-19870: error reading backup piece /exp/prod_backup/emrepdb_0_PROD_20101114_ualt0vq5_1_1
ORA-19502: write error on file "+STG_DATA/stage/datafile/undotbs4.dbf", blockno 1044817 (blocksize=8192)
ORA-27061: waiting for async I/Os failed
Outer dbms_backup_restore.restoreCancel() failed
Any one faced the same kind of issues before?

Hi,
ORA-19870: error reading backup piece /exp/prod_backup/emrepdb_0_PROD_20101114_ublt0vq6_1_1here is problem with execute permissions on the backup location, give full permission to open those backup sets and read...
post
ls -ltr /exp/prod_backup/emrepdb_0_PROD_20101114_ublt0vq6_1_1give full permissions like *777*
#chmod 777 -R /exp/prod_backup/*
Thanks

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

Error in message monitoring while creating new record in R/3

Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
Devendra

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

"Error in message monitoring in runtime workbench"

Hello All,
I have an error in message monitoring in runtime workbench.
We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
Please suggest what are the steps involved to resolve this problem.
Thanks and Regards
SAN
null
k san

San,
Can you please copy / paste error message.
Also check if you have set correct port in Exchange profile under Runtimeworkbench.
Nilesh

Monitor Non-Paged Pool Usage SCOM 2012 R2

Has anyone figured out an effective method of monitoring non-paged memory pools.
My hope is to build a monitor that can determine max pool size and alert when non-paged pool usage is >= 90% of that maximum.
I've done some research on the subject, with the most relevant TechNet article being http://blogs.technet.com/b/markrussinovich/archive/2009/03/26/3211216.aspx.
Any help would be appreciated.

Hi,
As we know, there is a performance counter for non-paged memory:
\memory\pool nonpaged bytes:
Low on Pool NonPaged memory
- less than 40% available (If the systems exceeds more that 60% of the Pool Non-paged bytes memory pool, then consider removing the /3GB switch or consider migrating to a 64-bit system.
Critically low on Pool NonPaged memory – less than 20% available (If the system exceeds 80% of the Pool Non-paged bytes memory pool. If so, consider removing the /3GB switch or consider migrating to a 64-bit system.
There is a rule to collect this performance, we can find it and enable it by overriding:
http://mpwiki.viacode.com/default.aspx?g=posts&t=155502
Regards,
Yan Li
Regards, Yan Li

Use Wildcard SSL Cert to Monitor Non-Domain COmputers

Hello,
I was wondering if a Wildcard SSL Cert from GoDaddy or another Provider can be used to monitor Non-Domain Computer on SCOM 2012R2?
TIA,
Jim

Hi,
The Operations Manager agents support two types of authentication method, Kerberos or certificate based authentication. In order to monitor servers and clients located outside the Operations Manager’s native Active Directory domain, you will need to configure
certificate authentication using either an internal Certificate Authority or through a 3rd party Certificate Authority.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Various error mainly Err_300 or VC017 on website!

Over the last couple of days seen I have loads of errors watching BTSport.com mainly Err_300 which I cant even find an explanation for? VC017 nearly fell out of my chair reading FAQ to check windows time settings, yep my time has always been set to Microsoft time server (thats how microsoft installs it) and is correct!!
Silverlight is up to date, tried various web browsers and my default is chrome.
Every other instance of a website that use silverlight works, Sky Go, Lovefilm & Netflix no issues no errors. Even found a couple more to test inc msnmoneycentral, msn silverlightdrm test, bubblemark (lovely bouncing green bubbles!) they all work without a problem, error or glitch unlike BTSport.com .
I have tried unsetting my computer time from using time server, even changing it and resetting it (What a joke), deleted mspr.hds, tried all my browsers nothing but various errors on BTsport.com (only on BTSport, there is a theme here!), mainly err_300 and vc017 (thought various other VC and 60** errors). I have I managed to get a stream working last night by turning off hardware acc (which is not required to do for any other silverlight web site, so I turned it back on after stream started working).
This morning errors yet again same scenario everything works except BTsport.com (think I may have mentioned this before). I tried turning off Silverlight hardware acc still errors. left it for 10 mins and now watching Hoffenheim v Leverkusen and the phantom goal (great match btw). I have done nothing to my pc since the last test 10 mins ago!
When I watch BT sport about 90% of the time iits online either on PC or Ipad. The Ipad is pretty faultless which cannot be said for the website. Unfortunately the web site is getting worse, from occasional errors to pretty much constant errors. When it works the website stream quality is excellent better than skyGo but in its current error strewn form I wouldn't pay for subs. Thankfully I dont pay for subs and I certainly wouldnt be paying £12 a month for its current content, maybe £5-8 could tempt me (as long as website errors are fixed ) ) and that depends on next years Motogp coverage. Skyplayer (SKyGo early incarnation) use to be pretty flakey with Silverlight but Sky sorted it out with SkyGo so hoping BT can sort BTSport.com.
Windows 8.1
IE.11, Firefox 24, Chrome 30
Norton AV
Silverlight 5.1.20913.0
Everything is up to date
In case it isnt obvious every other silverlight website I have visited works perfectly...except BTSport.com

I have this same problem with VC017. The FAQ suggestion about resetting time server is hilarious. It's not that it is impossible that anyone has changed it, but is this really the most likely cause of the problem? The fact that it is in the faq to deal with this error code tells you that BT is just taking the **bleep**.
Silverlight works fine on every other website. I haven't received an error code for silverlight *ever* on this computer until I tried BT Sport. But BT's tech support wants to tell me it is my internet time server, cache, or browsing history that is the problem. Hilarious! They know less about Silverlight than I do! I was on online chat today with a BT tech and his suggestion was, get this, relog onto BT Sport. Then he gave up. I got the six step solution to the VC 017 error via email a couple of hours later (reinstall silverlight! even though there is nothing wrong with it!) along with a suggestion to pay for their supreme technical support.
Now I am seriously laughing. My experience with BT technical support, their "FAQs" and their "online suport chat" makes me pretty certain that I could make better use of my money by piling it up in the yard and lighting it on fire. This is an organization that has done everything in its power to convince me it has no idea what it is doing and it wants me to pay more for its technical support. Pass. I'll enjoy streaming services that are run by professionals on my way-slower-than-advertised BT broadband (not a single speedtest has come within BT's advertised range! but that's another-stunningly similar (its your firewall, which we know works perfectly fine in a rural Indonesian bus station, just not on BT!) story).

Various errors on self-monitoring (non-Prod) evironment

Similar Messages

Maybe you are looking for