Various missing drivers after re-installing Win7 64 bit on hp pavilion dv7-6111eo

Aloha
First off... I'm no techy, geek or nerd... And I mean those words in the best way, to those who are.
In this case You need to see me like a kid in kindergarden, being taken by the hand, and being shown what to do, down the the last detail. Sad but true.
Without me knowing why, I experienced missing several DLL-files, and often got error messages about those.
A pain in the neck, so I re-installed Windows 7 64 bit, as I didn't want to mess with those DLLs missing.
After that re-installing, I couldn't get internet-connection to my router. Luckily I have a 10+ year old stationary, where I after some time found the driver I needed, so that works now.
But now it seems there's several other drivers missing/not been installed.
I got a little info, from another post, what to provide with info, and hope that will be enough. if not, then please let me know the additional info that may be needed, and where I can find those on my PC, so I can provide these.
Missing drivers:
Network Controller;
Hardware ID: PCI\VEN_8086&DEV_008B&SUBSYS_53158086&REV_34
SM Bus Controller;
Hardware ID: PCI\VEN_8086&DEV_1C22&SUBSYS_1659103C&REV_05
Universal Serial Bus (USB) Controller;
Hardware ID: PCI\VEN_1033&DEV_0194&SUBSYS_1659103C&REV_04
I have 4 USB-ports, but only one will work, the others don't respond, and I need all four running at the same time. Plus I'd like to have everything in order after I had to re-install Win 7.
I thank You in advance for any and every help I can get. Just have in mind, that I need the things carved into paper.
This question was solved.
View Solution.

Hi:
You need these drivers...
SM Bus Controller; Install this first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&dlc=en&lc=en...
Network Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&dlc=en&lc=en&...
Universal Serial Bus (USB) Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&dlc=en&lc=en...
You will also need this bluetooth driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&dlc=en&lc=en&...

Similar Messages

Missing drivers after upgrade to Win 7 in HP pavilion dv9500

I upgraded my laptop to Windows 7 32 bit and everything works except from 2 base system devices listed in device manager that need work. What should I do?

I have the same problem with you but I found out once you upgrade your pc to windows 7 there's always an issue. You'll try calling HP Tech, and they will refer you to PC techinician nearest to you because they said there's something wrong with you HD blah blah or your sound card is gone...need a new one. Well I nearly believe them until I stumbled what's causing my problem and I fixed it myself. Now I have no problem with my sounds missing or audio device missing. My Laptop has voice now non-stop.
The problem that cause wasn't about the hard drive or the sound card but it is about the CONFIGURATION OF YOUR PARENTAL ACCOUNT CONTROL IN WHERE YOUR AUDIO SOUNDS HAS TO BE USE. AFTER I SET MINE TO WHAT IS SUPPOSED TO BE THE RIGHT OPTION, SINCE THEN I HAVE NO MORE PROBLEMS ABOUT MY SOUNDS OR AUDIO DEVICE MISSING OR NO AUDIO DEVICE INSTALLED.
SOLUTION; Click Start/Control Panel/User Accounts and Family Satefy. Click Parental Control. In the box at the LEFT SIDE you will see GAMING RATING SYSTEMS. Click Gaming Rating System and click administrator box Yes(if come out). In the box you will see some LOGO ICONS for you to choose in which gaming rating you want to use your sounds. This is where you must configure your computer what rating is compatible to use to run sounds in your Windows 7 from Windows Vista or Xp.
The previous option in my Laptop was in the 3rd option ESRB. Then I move it to the 2nd option that the LOGO is written in Chinese Language( Computer Software Rating Regulation). I click OK and then Restart. Since then I have no missing audio or missing sounds problems.
I hope that helps.

Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng

Can any one help me with Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng? I'll be very grateful for any answers
This question was solved.
View Solution.

Hi:
You should be able to use the drivers and software from this model on yours...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6936...
When you go to install the graphics you have to install these drivers in this order and reboot after each installation.
1. Intel chipset installation utility.
2. Intel HD graphics driver.
3. Nvidia HD graphics driver.

Missing drivers after installing Win7

Hallo
On my just new macbookpro, i installed an original Win7 home premium 32bit.
All seemed to go right, Windows is working ok, but most drivers are missing!
How to pick them up from internet if you cant't be connected to??
Where can i find them (the right ones)
thanks

Below is reproduced a procedure the BC Install Manual suggests.The Windows install DVD can do the same sort of thing if it is the Windows drivers that are missing.
You can find the entire PDF document here:
http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorer and double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions. If a message appears that says the software you’re installing has not passed Windows
Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example, if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
To reinstall a specific driver:
1 Insert your Mac OS X installation disc. 2 Quit AutoRun if it opens. 3 Using Windows Explorer, locate the driver that you want to reinstall. 4 Open the driver to start the installation.

WT8-A32 missisng drivers after clean install of Windows 10

Hi, I wanted to do a full clean install of Windows 10 in my Encore WT8.So I first upgraded it to Windows 10 and then runned the installation via a USB Pen. During the installation I missed the touch screen. but I used and external Keybord+Mouse to carry on.The issue was that after finishing the installation I missed a lot of drivers. Touch, audio, ...If I try to update them via Device Manager it simply state that there are no drivers available Did anywone made a sucessfull clean install of the Win 10 in the Encore WT8-A32?Anyway of getting the drivers to be installed on a clean install of Windows 10? I tired to install some drivers from the 8.1 version but it complained it was not compatible. Thanks

During the installation I missed the touch screen. but I used and external Keybord+Mouse to carry on.The issue was that after finishing the installation I missed a lot of drivers. Touch, audio, ...If I try to update them via Device Manager it simply state that there are no drivers available Did anywone made a sucessfull clean install of the Win 10 in the Encore WT8-A32?Anyway of getting the drivers to be installed on a clean install of Windows 10? I tired to install some drivers from the 8.1 version but it complained it was not compatible. My notes about a clean install are in another thread, but you have done 99% of what you need.Just grab the 'intel platform installer' and run it. This will give you a functioning touch screen.The version I used was win8.1 vintage and works without a problem.

USB ports no drivers after re-install of windows

Had to re-install windows because of some ransomware issues. Everything has gone well except for drivers for the left usb ports and sm bus controller. I have searched the HP website for the drivers but none can be found. The usb ports on the right side work fine but not the left. When looking in device manager they are missing drivers. I have tried about everything i can think of to resolve the issue with no success. Any help would be appreciated. Thanks
Machine is
HP pavillion dv7-6b57nr
This question was solved.
View Solution.

Hi:
You need to install the AMD chipset drivers from the link below which will install the smbus controller and usb 3 controllers.
You want the first file listed on the webpage.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

Two missing drivers after instal

Hi
I recently had to complete a fresh OS instal following the PCI card which ceased to want to be recognised by Windows.
That cured the problem but am left now with two devices not being recognies by the syste. One is SM Bus Controller and the other just states Unknown device.
I also note that it is only seeing one of the hard drives now and none of the ThinkPad short cut buttons work.
However, the lap top is funcioning normally.
Does anyone have any idea what could cause this, have I missed a step somewhere.
Thanks in advance,
Liam
Solved!
Go to Solution.

It sounds like it may be your Intel Remote Systems Management, if I'm correct then try rebooting into your BIOS menu and find the Intel SM manager menu and disable it at the low BIOS level.
At next boot, the devices should be hidden from the OS and the new hardware detected issue / devmgmt.msc unknown devices should be gone.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

Missing drivers after upgrade Hard drive of X31(2672)

Hi,
After upgrade my X31 hard drive(the old one is dying), my USB is not working anymore. Through PC doctor, I found both the drivers of Network Controller(code 28) and Universal Serial Bus controllers at USB/RootHUB (code 39)are missing. I don't have recovery CD. Do you know how to fix it?!
Thanks,
Yang

Install ThinkVantage System Update and let it pull down the drivers and apps for you machine and OS. Install the Win 7 version.
ThinkVantage System Update
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Excel 2010 paper size issue with PCL6 drivers after KB2592687 installed on client

When I connect to the RDS server and open Excel with the PCL6 printer and select File / Print the paper size says Custom Paper Size and I can not change the paper size here, in the Page Layout tab or in the drivers properties pages. Using the PS driver there
is no issue. I've tried using several stock PCL6 drivers from Windows 7 and have the same issue such as the HP LaserJet P4014/4015 PCL6. Using the Lanier LP131n PCL6 or PS I had the issue with PS as well.
I do not have the drivers loaded on the server so it is using Remote Desktop Easy Print. If I do load the drivers and allow it to use them then there is no issue but I cannot configure the printers options without taking ownership of the printer so that
is not desirable.
If I do not install KB2592687 then there is no issue, but that is not an option as I am dealing with a customer who's IT manager refuses to remove this, even to test it, and says our printer driver has the issue and is not compliant with MS TS.
Could I be missing any configuration, hotfix, policy that could explain this issue or any other workaround? Or is there a change required to our printer driver for this?
Test setup:
I created a new Windows Server 2008 R2 Standard server with SP1, Added the RDS Role, Installed Office 2010 Professional with SP1 using the Terminal Services product key. No updates were installed. I have tested installing every possible update as well for
both Server and Office.
I then created a new Windows 7 Professional x86 with SP1 client, installed PCL6 & PS printers, installed KB2574819 and KB2592687. No other updates were installed. I have tested installing every possible update as well.

Hi,
Did you find any particular Event ID for your issue?
To troubleshoot this issue, have you tried changing the default printer and printing from other programs such as Word or any other?
The issue which you are facing might occurs because the Microsoft XPS Document Converter (MXDC) determines the paper size by using the FormID value on the server. As you commented that you are using Easy print driver first you can find incorrect paper size
if RD Easy Print printer driver first is enabled.
To work around this issue, use the forms that are defined by the system when you print. The paper sizes for these forms match on the server and on the client computer. Additionally, a printer driver can rename these forms. Please refer below article for more
information.
The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
Apart from this providing link to understand RD Easy print in Windows 7 & Server 2008 R2.
Hope it helps!
Thanks.

USb3 drivers won't install win7 downgrade

I uninstalled windows 8 on a touchsmart envy20 d034 and put on win7 home premium. I got all the drivers except for USB3, sm bus controller, and bluetooth. The only one I really care about is usb3. I've tried a dozen different installs but always get " This software does not meet the minimum requirements for installing the software". Arrgh! They were working with Win8 but I am NOT going to use that horrible OS. I've tried the Intel downloads and several different downloads from HP.
Suggestions?

Hi:
I can't find any comparable model to yours with W7 drivers.
So, see if these work...
Chipset: Should install SMBus Controller.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-105638-1&cc=us&dlc=en&lc=en...=
USB3: If this one doesn't work, please post the hardware ID for it.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-108665-1&cc=us&dlc=en&lc=en...=
Bluetooth: I think that most of today's desktop PC's with built in wireless and bluetooth use standard notebook wireless cards.
So, try this Ralink Bluetooth software and driver from a contemporary notebook PC.
You will notice that it is the same driver version as the one on your PC's support and driver page but this one also offers support for W7.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
If you don't know where to find the hardware ID, please read the info at the link below.
http://www.devicedriverfinder.com/blog/device-drivers/how-to-check-the-hardware-id-for-a-windows-dev...

How to Get HP Drivers After (DIY) Installing Windows?

Series: How to Re-Install Windows when you don't have the Recovery Discs
Intro: What is an ISO? Why is it used?
Step 1 - Get the ISO - ISO Download Links
Step 2 - Burn the ISO to a DVD or USB
Step 3 - What to do with the ISO DVD/USB? Change the Boot Order
Step 4 - What to do After Windows is Installed? How to Get HP Drivers?
Step 4 - What to do After Windows is Installed? How to get HP Driver?
Winodws is Installed, Now What?
Once the installation is complete, you'll need to go to your HP Driver Page and download all of your drivers. Your wireless function may not work automatically with a fresh install. You may have to plug an Ethernet cable into the computer and into your router to connect to the internet initially, until you have downloaded your wireless driver.
The best way to use the HP Driver Page, is by putting in your product number ('P/N' found on the HP label on the bottom of the computer) and click Go, rather than the 'Detect my product - Find Now' option. Without an HP Recovery Disc version of Windows, the 'Detect my product' option is not likely to work properly.
Another important note: If you had to go all the way into BIOS and change the Boot Order to the DVD drive (or USB), you'll have to go back into BIOS at your convenience and change the Boot Order back to booting from the internal Hard Drive first. If you used the F9 Boot Order Menu, it only changes the Boot Order temporarily, for that one power on iteration.
If you have any questions, create a new post (How to Create a New Post - Video), copy and paste it's link into a private message to me, and I will respond on your thread

Note down all the file names of the following queries first:
SELECT NAME FROM V$DATAFILE;
SELECT NAME FROM V$CONTROLFILE
SELECT NAME FROM V$TEMPFILE
SELECT VALUE FROM V$PARAMETER WHERE NAME = 'spfile'
If the last query doesn't show any file then copy $ORACLE_HOME/dbs/init<SID>.ora file.
After making the list in sqlplus issue:
SHUTDOWN IMMEDIATE
And now you can copy all of those files to some other location. Make sure you install same version of OS and Oracle to restore these files. It would be easy for you if you keep the same directory structure after reinstall and place all those files as they were earlier.
Daljit Singh

Missing drivers after fresh installation of window 7 the base system device missing.

missing driver on HP pavilion dv4 the base system device drive,as a result of these i cant access sound on system.

Hi:
The base system device is most likely your card reader.
Missing audio is related to something else.
On the bottom of your PC on the sticker with the serial number, please post your p/n.
That will identify the specific model of your dv4 and I can send you the link to the drivers.
The p/n should be arranged similar to this: AF846AW#ABA
Paul

Missing fonts after additional install...

I've been using InDesign CC for a couple weeks to update catalog pages last edited in CS6 without any issues. Yesterday, I installed Dreamweaver CC and now when I go back to InDesign it says I'm missing Myriad Pro. The font is still installed on my computer, InDesign just can't find it. Am I missing something here?
Thanks

Thank you for the response...I actually just shut down InDesign and started it up again and the font was there. Makes no sense since I had completely rebooted my computer but at least its back.

Missing partition after re-installing windows 8

Laptop: Dell Latitude E5530
OS: Windows 8
Problem: The laptop went into the dreaded Automatic repair loop and after trying all suggestions I found online, I gave up and resorted to re-installing. Before the re-install my laptop had 2 partitions (C and D).
To re-install, I inserted the recovery DVD and used the Dell tool to do a re-install with the option to recover my data. All went well. However when the computer boots the D drive is not visible under My computer. It is visible under Disk Management but
I cant do anything to it. When I right click it the menu only give me a help option. When I boot from a Linux USB stick, I can view and access data on both partitions.
I need to access the D drive on windows what should I do? Thanks

It is possible to revert the protections on the recovery partition to allow access to it, however if your notebook is under warranty I recommend you contact Dell technical support. It may be that fiddling with the recovery partition may void your warranty
unless directed to by a Dell representative.

Missing Features after Clean Install

Hi all,
I'm creating a new thread with that subject because now it got out of hands. I mean, it wasn't fitting anymore in the thread I initially wrote in it.
Here is my problem:
in bridge, under the tool menu, the only options I have stop at cache. There is nothing after that i.e. Photoshop, Illustrator,... Also, I wanted to use the option Output to Web or PDF but after selecting the files I want to use and clicking that option, the panels move but the output panel is not showing like it is suppose to show.
In my department, my co-worker, sitting next to me, has it working fine. Today, I uninstall all CS4, removed every files with CS4 in it. I also used the MacClean provided by Adobe (it did nothing useful by the way...). I re-installed everything and I still have that problem...
Help me!!! please. I'm on a Mac 2.66 Dual-Core Intel, OS 10.4.11 with 5GB of DDR2 Ram.

Hmmm
Check the following path:
./Applications / Adobe Bridge CS4 / Required /
and see if the respective plug-ins are there, such as Photoshop Adapter.plugin.
I don't have the complete suite as such, as I run older versions of InDesign, Illustrator and Acrobat, so I can't tell you the other plug-ins are called, but I imagine they are similarly named for the other applications in the suite.
When you installed CS4, had you perhaps improperly uninstalled CS3? Starting with CS3 you have to use the Adobe Uninstaller in Applications / Utilities / Adobe /. You cannot drag the Photoshop folder to the trash like we could do with older versions.
If that is the case, then run the Adobe CS4 uninstaller first in order to get rid of Photoshop 11 properly. Then look for the Adobe CS3Clean script in the downloads section of the Adobe web site, download it and run it. This is NOT necessary if you keep CS3 installed on your disk. I have all versions of Photoshop from version 7.x through 11 happily coexisting on my hard drive. I can even run two versions simultaneously by launching the older version first and assigning different drives for their scratch.

Various missing drivers after re-installing Win7 64 bit on hp pavilion dv7-6111eo

Similar Messages

Maybe you are looking for