Various PS issues using CS6 via CC (on Windows Vista)

I am at my wits end wit this one and on the verge of an uninstall and reinstall.
All of my images (created on another computer that was also using CS6 on CC) appear with just a fragment of the original showing in the workspace, the rest is chequered out. When I select the paint tool it erases the one little segment that was there. I've attached a screenshot. I hope I'm not being stupid. I apologise if I am. Check the layers box, the logo should be visible.

That sounds like a possible graphics card driver issue.
As a test you could go to Edit>Preferences>Performance and try setting the Advanced Settings under Use Graphics Processor to Basic and then restart photoshop and see if that makes a difference when opening images.
If that's still not good, then try unchecking Use Graphics Processor and restart photoshop.
The gist of all this is most likely you need to update you graphics card (video card) drivers from the card makers website.
(not through windows update)

Similar Messages

  • Adobe Premiere Pro CS6 will work under windows vista?

    Adobe Premiere Pro CS6 will work under windows vista?

    Hi,
    Thanks for posting on forum. Windows Vista is not a supported platform for Adobe Premiere pro CS6 but, you can try the installation on Vista and check if it gets installed on it. Also, if it gets installed you might face further issues while using the product.
    Thanks,
    Vinay

  • Deploy Visual Basic 6.0 RDC application using Crystal Reports 9 on Windows Vista

    Post Author: albe
    CA Forum: General
    When attempting to deploy a Visual Basic 6.0 Report Designer Component (RDC) application using Crystal Reports 9 on Windows Vista systems, the application fails after the first print or preview (that show normally) and an error occurred: -2147417848 Method '' of object '' failed.
    The app use the RDC and Active Data; I verify that the problem is encountered when the app calls the 'SetDataSource' method.
    I tried everything that came in my mind: reinstalling it a few times, with administrator priviledges, disabling uac, manually registering dlls, ...
    I hope that this will be fixed, since Crystal Report 9 is the last CR version compatible with windows 98.
    thanks in advance,
    Alberto

    Hello,
    This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
    Try downloading the only patches available from:
    ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
    ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
    ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
    ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
    Thank you
    Don

  • HT1178 Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive

    Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive. If so what software do I need to buy?

    Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive.
    Yes, on XP, Vista and 7. Have not tried 8.
    If so what software do I need to buy?
    Genie Timeline Pro does a very nice job...and it is similar to Apple's Time Machine.  It's not cheap though.  Check with the Genie folks for more info and compatibility with Windows 8.
    Genie Timeline Pro | Overview | Time Machine Backup Software for ...
    Other users may have some other suggestions.

  • Flash Vulnerability used to break security on Windows Vista

    Found an article on The Register about a previously unknown
    flash vulnerability being used to break security on Windows Vista
    during a hacking contest. The original link to the article was on
    Wired's
    Blog
    quote:
    "Shane Macaulay, who played a hand bringing down a Mac during
    last year's Pwn2Own contest, defeated the Vista machine using a
    previously unknown vulnerability in Adobe Flash. On final day of
    the CanSecWest conference in Vancouver, Macaulay spent the better
    part of four hours trying to get the exploit to work."
    http://www.theregister.co.uk/2008/03/29/ubuntu_left_standing/
    Can anyone verify the exploit that is being referred to in
    this article or whether Adobe is aware of it?

    Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
    The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
    Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
    Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
    Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
    If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
    Thanks,
    eidnolb

  • Problems to reach ASA5510 via IE on Windows Vista

    Dear all,
    since some days we have a ASA5510, we connected it on a Windows Vista Laptop via ethernet cable (using at the back of the router the mgtm slot) and connect it on the network slot on the laptop.
    Laptop is getting IP addresses automatically.
    Now we tried to reach the router in the Internet Explorer using: http://192.168.1.1, but we could not reach this site.
    When I try to ping the router via cmd and typing ping 192.168.1.1 I get answers.
    For us it is very important to change the IP address of the router, as he will be used in a network with 10.xxx.xxx.xx addresses.
    I have no idea, what I did wrong here
    Would be nice, if someone has an idea.
    Just to let you know, I'm not that Network specialist, all I know comes from learning by doing. So sorry in advance for any stupid question I may have.
    Thanks for your patience.

    Great, this worked!
    I have now changed the IP address into one of the address ranges I need and waiting now that the step of communicating the new configuration to the rotuer will be finished.
    Let's cross the fingers, that it will work successfully.
    Edit 1 11:07 - Is it normal that it take that long to send the new IP address configuration to the Router?      
    Edit 2 14:54 - It is now accessable on the new IP range. Now having another issue for which I will create a new discussion.      
    Message was edited by: Simone Schultz

  • ITunes has stopped Working when using Ipod shuffle 3gen on Windows Vista HB

    Itunes keeps shutting down when I insert my Ipod shuffle into the usb connection of my latop. I am using a Windows Vista Home Basic for an OS.
    Not sure if this is a Vista, Apple issue, or something else...
    I have contacted apple about this and uninstaled/reinstalled Itunes. Yet after all this, I get the same error message. The message reads:
    "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    As far as I know Vista should be compatible with iTunes and it is until I actually try to use my shuffle (newest model). Its weird because my shuffle works fine on a second computer that has Windows XP for an OS...
    Does anyone have a solution to this??
    Thanks in advance!

    i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

  • Using Parallels and a Dell Windows Vista CD

    I was hoping I could use a Windows Vista CD I have from Dell in conjunction with Parallels but I keep getting a message informing me that the product key is incorrect.
    I've checked 100 times and I know it IS correct. But is this an issue concerning the Dell OEM disc and the fact it might not work with Parallels?
    Thanks

    There are two kinds of OEM Windows discs - those from a major manufacturer like Dell and those that you can buy from stores like NewEgg. Generally the OEM discs from major manufacturers are specifically tied to a computer model, the same as Apple's restores discs. Chances are the disc installation is looking for a specific component and not finding it. This is consistent with Microsoft's dubious claim that the operating system license is tied to a specific motherboard and when the motherboard is replaced you must purchase a new license.

  • Using an iPod mini with Windows Vista

    I just purchased a computer with Vista. When trying to install my original software from my iPod mini, I got a Windows message that said:
    "Don't install this driver software. You should check your manufacturer's website for updated drivr software for your device."
    Does Apple have update software I can download? I haven't been able to find it.

    First, I should disclose I'm not on Windows, but I'm going to make an educated guess that all you need to do is download iTunes for Windows Vista. That will have any USB drivers in it to connect to the iPod via USB. Let me know if this works. Ref: http://www.apple.com/itunes/

  • Hotsyncing a palm centro using a bluetooth adapter and windows vista 64 bit

    Please help. I have read and followed all of the other suggestions on this forum and nothing has worked. 
    I have a palm treo.  When I try to hotsync using the bluetooth adapter, it gives me a message stating:
    "unable to connect,port is being used by another application".
    I have rebooted, soft reset, etc.    and still get the same message.  
    I do not know how to set up another port on the windows vista program.  That was one suggestion.
    I have selected both bluetooth and serial port under the hot sync manager.
    Nothing works.
    Any help is greatly appreciated.
    thanks 
    Post relates to: Centro (AT&T)

    Hello akashmedehrotra and welcome to the community.....
    Windows Vista 64 bit is only sync with a wireless connection.  Either Bluetooth or Infra Red.  The M515 does not have bluetooth, so you would have to purchase an IR Dongle and sync using Infra Red.  You won't be able to sync with the USB cable on your desktop.
    Colapop

  • Monitor deinterlaced in using Premiere 6.5 with windows vista

    I would like to know why the monitor of my Premiere 6.5 is not working properly any longer, after been using the program OK until november, moreless. I use Windows Vista, and it was very good performance with Premiere 6.5, until the day when it just started to fail... The monitor just don't work, even in single or dual view. Is it maybe an update for Quicktime, Realplayer or even Windows, what pushed Premiere 6.5 to work incorrectly?
    To make it clearer: the image in my monitor now is like deinterlaced.
    Please someone help me. Daniel

    I have adobe premiere 6.5 original and OS Vista 32 Bits. I want to Know if there hare some problems in use the adobe premiere 6.5 in Windwos Vista 32 bits

  • Problem using CS6 via network

    We are currently experiencing playback issues (sound and vision stuttering/out of sync) when using Adobe Premium Pro CS6 and .MOV files in a new project from our Network File Server (Microsoft Server 2008 R2). I am running a PC with specs which meet Adobe’s minimum requirements however I am on a domain on a 100MB Network link. I have tested using the .MOV files locally and receive no playback issues. Are there any settings which need to be changed to allow or help using files on a network? Or does Adobe not support that?  Other discussions I found all seemed to refer to CS5.

    Until Adobe Anywhere is released, the recommendation is to use only local storage.
    http://tv.adobe.com/watch/adobe-anywhere/introducing-adobe-anywhere-for-video/

  • SAP printer issue using output method store in windows

    Hi,
    Here is my issue:
    I created a printer in SAP in t-code SPAD.  The host spool access method is C, direct operating system call. The host printer (windows printer) has an output method «store», which means that the printing request is stored in the printer and the user needs to release the printing job directly on the printer using a password.
    If we use printer LOCL_LOCAL, this works correctly, i.e. the printing job is sent in the printer memory and the user release it with his password
    If we use a printer with an access method C, the printing job bypass the output method store and the job is printed immediately.
    Any idea why the acces method C is not working for output method «store» in Windows?
    Thanks,
    Julien

    ideally it should work if the spool work process of the SAP System and the host spool system (operating system spooler) are on the same host. is this the case?
    check [http://help.sap.com/saphelp_nw70/helpdata/en/4f/9c033cff903105e10000000a114084/content.htm]

  • Issues with Flex3 and CF8 on Windows Vista

    Sorry for the whine, however I feel it necessary to get a few
    issues I've found with Flex3 on a Vista Laptop working with CF8
    that I've not seen documented elsewhere.
    Environment:
    Sony Laptop with Intel Core 2 Duo processor and 3 GB Ram.
    Running CF 8 Standard Edition, along with mySQL 5.x and
    access to a SQL Server instance on another machine on the same
    local network.
    What I am trying to do:
    A) learn flex, my background is CF with over 8 years of
    experience along with Flash AS2 along the way.
    B) put together a hello world app.
    C) use the flex/cf application wizard to build a simple
    master/detail set of selection/edit screens for one table of a
    database that I used recently on a CF8 project. To see how much
    better the UI really is on Flex and whether I could use it to retro
    fit that old application to have a better UI using flex3.
    Issues.
    My mini-application is set up initially in the folder
    c:/inetpub/wwwroot/mydirectory, but it does not work.
    Reason is that when run, it cannot access the flex2gateway on
    the url that the wizard puts into the app. which is
    http://localhost/mydirectory/flex2gateway...
    Details:
    flex2gateway does not work on a subdirectory URL on the
    default web site.
    If I access
    http://localhost/flex2gateway/
    I get a blank screen (as expected) meaning that the flex2gatweway
    is working.
    If I access
    http://localhost/mysubdirectory/flex2gateway/
    I get a 404.0 error (not found)
    Now, I beleive this is supposed to work, something must be
    wrong with one of the xml file setups. But I cannot find any
    documentation for it.
    Initially the flex2gateway did not work at all. I did the web
    connector thing with CF batch file and that got it working, but
    only on the base directory, not the subdirectory.
    So, to get around this issue, Luckily Vista with IE7 allows
    more than one website.. I create a whole new website that is
    accessed using
    http://192.168.1.73:81/
    I set this website up in the folder c:/localhost/mydirectory.
    The flex project is called mydirectory
    So we come to issue 2.
    Given the above Issue number 1, I have further frustration
    because when the Flex/Cold Fusion Application wizard builds the
    various mxml files it insists on prefixing all of the remote object
    calls with 'mydirectory.'
    e.g "mydirectory.components.cfgenerated.mycfc"
    Now, given that the web root is also the base of the project,
    this will not work.
    What actually works is: "components.cfgenerated.mycfc"
    There seems to be no way I can configure the project when
    building it to get around this issue. The only way |I can fix this
    is to manually edit all the mxml files after the wizard is
    finished. I also have to doctor the project setup for similar
    reasons. It wants all of the urls to be:
    http://192.168.1.73:81/mydirectory/bin/main.html
    instead of
    http://192.168.1.73:81/bin/main.html
    So obviously the wizard is not set up to handle applications
    that are based right at the web root, even though this is the only
    place that the flex2gateway can work. <snafu I guess>
    Issue 3:
    I find that the flex/Cf application wizard is set up to build
    pages based upon a certain narrowly defined way of constructing the
    source database tables. In particular it wants every table to have
    its own unique numeric id for each row, and can't handle a string
    for the primary key and have the primary key editable as well.
    Seems inflexible if you ask me. The main problem is that the
    preconditions on the table structure that the wizard can work with
    are poorly defined and documented. You obviously had to go to the
    same school of database design and the same class as the Adobe
    developers to think in the same way.
    Given that this tool is supposed to be a help to new users of
    Flex and AS3 and it is supposed to be a productivity aid, perhaps I
    should not be surprised to have had to spend over a week getting to
    grips with the wizard and learning its tricks just to get it to
    build a mind numbingly simple mini app of my own that works when
    run. Sorry Adobe, but you get a F minus on your report card for
    this one, particularly on the really bad documentation. Just as bad
    for the coding complexity of the solution to seemingly simple
    application concept.
    Cheers,
    Bryn Parrott

    Hi,
    Which version of RDP client you are using for your client?
    Does more user login at same period of time?
    As you have commented that after sticking the user can’t able to login in RDCB server, here I can suggest you to check the setting of connection broker. Also you can check that you have place the proper location path of UPD while configuring in collection configuration
    wizard. You can take a look at below article foe virtual desktop configuration.
    Deploying Virtual Desktops with Windows Server 2012
    Are you trying to use same UPD for different collection then also it might happens to occur your issue. The fact of UPD is User profile disks are for a single collection only. A user connecting to two different collections will have two separate profiles. If
    you want to synchronize settings, refer to Microsoft User Experience Virtualization. Go through this article for more understanding related to UPD.
    Working with User Profile Disks on Session-Based Desktop Deployments
    Hope it helps!
    Thanks.

  • How to use my time capsule with windows vista

    i have a 2tb time capsule iphone 3gs appple tv and a ipad 2 the wife and kids have iphone 3gs and 4 and id like to set up a home network for us all to use and share music and photos is this possible

    Sorry the title never gets into detail at any point.. no vista computer is listed.
    Access the vista computer to TC turn on the guest network and allow full read write access. Make sure you have the workgroup set correctly. There are issues sometimes on the windows side but try that.
    As for using the TC as a file store.. well it isn't a good idea. It is a backup device.. which has no ability to back up itself. There is no mirrored disks and one day it will die and you can say bye bye to your precious photos and music. You can work your way around the issue.. sure.. in the end you will need an alternative backup on a computer.. that alternative backup will then be backed up to where??
    If you must run your itunes and iphoto library on the TC just read about how to set up the libraries in network location. Google will find the posts.
    http://gigaom.com/apple/using-time-capsule-as-a-media-drive/
    You perhaps should read all the other posts about why not.. as well as how to.

Maybe you are looking for