VAT Change from 4% to 5%

Dear Gurus,
What are the procedure to change the VAT from 4% to 5% for haryana state.
kindly provide the solution.
Regards
R.Rajendran

Dear Mr JOshi,
Thanks for your reply.
How to create new tax code and map into condition record.
Please provide the solution.
Thanks in advance,
Rajendran R

Similar Messages

VAT change

Hello,
While creating document we charge tax code in addition to the amount:
tax base amount 100
tax 16 %
total amount 116
We do tax return to the tax authorities at the collection status. When the customer pay 116 we transfer 16 to the tax authorities,
Now we face a case of VAT change from 16% to 17%. Therefore I sould collect 17 but in my system the document amount is 116 and not 117.
Is there a way to deal with VAT change?
Thanks,
Ben

First of all please elaborate what is the process that you are following for posting the document ?
In case of miscelleneous chages or addition charges you can always use FPE1 to post the document .
Cheers ,
Dewang

VAT changes in UK

Hi All,
As there are VAT changes in UK do we know any news from SAP if they are releasing any patch to do this or is there a standard way of doing the config for this.
If so can you please share the same with me i am new to Finance would appreciate if the help is as much detail as possible.
Many Thanks,
Kishore Yerra

>
Karen Smith wrote:
however, why would I not just change the existing percentages on the AR side?
Because your old data won't make any sense. For example current VAT rate is 20%. You post an invoice where the net value is 100 GBP, so the tax will be 20 GBP and the gross 120 GBP. The percentage rate for the VAT won't be saved into the BSEG/BSET lines, only the tax code. If you change the percentage in the tax code (for example to 25%), and you have a look at this invoice, see that the gross value is 120 GBP and will think that the net is 90 GBP and the tax amount is 30 GBP, and if you look at the line items you won't understand...
So, don't change existing tax codes, create new ones!

BBP: Items not taken into BBP after VAT change

Hello,
I am new in FI-CA and I am facing one issue.
1. We changed VAT from 01.01.2011 by creating new VAT code
2. We are using BBP procedure 2 - with 11 due dates
3. In the amount of the BBP were taken only the items from the old VAT code.
The posting items with new VAT code from the billing document were not taken into budget billing plan.
Any advice where to look to find out problem?
Thanks in advance.
Vlado

hello Amlan,
We have tested these steps
1. The dunning procedure releases as an activity the documents that reach a certain dunning level.
2. The items are submitted to the collection agency using FP03D
3. The users manually recall some of these documents
5. Execute FPCI and like this the recall is included in the file.
If we do the previous everything works fine,but I believe the standard SAP is missing something for cancel release cases, because an inconsisty is being created between SAP and the collection agency. If you are reseting something a notice for the collection agencies would have to be created.
On top of that we cannot exclude recalled items (09) in the selection of FP03D (or FP03DM), because we also have systematic recalls that are done according to the longevity of the documents and according to that longevity placed in different collection agencies.
Do you think this can be reported to SAP as an error? The system in any case should prevent you to do the cancel release if the record is not still in any update file (table dfkkcoli_log) to prevent the inconsistency. Just like the system does not allow you to do the cancel release if the item has not been recall first.
Regards,
Sergio

Issue on payroll area which is changing from biweekly to monthly in Mid of

Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
Chandra

You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on 03/29.
Retire payroll is on 04/08
Biweekly is on 04/15
Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

TS3899 I changed from an Iphone to a Android. I can't get my email from other Iphones

I changed from an Iphone to a Android. Now I can't recieve emails from other Iphones.

Email should not be a problem, text messages can be but not email if it is set up correctly on your new phone.

I have changed from an iPhone to a Sony but when my wife send a message on her IPhone it still gets sent as a iMessage how do I change the settings

I have changed from an iPhone to a Sony but when my wife send a message it still gets sent as an iMessage how do I change the settings

Hello, Vespa Boy125.
Thank you for visiting Apple Support Communities.
Here are the steps that you will need to process on your line to remove your number from iMessage.
iOS: Deactivating iMessage
http://support.apple.com/kb/ts5185
Cheers,
Jason H.

'CHANGE' event not triggering for BTE 2214 on park/change from FBV1/FBV2

I have designed a workflow template for FI parking. If the parked document is rejected, i need to trigger FIPP 'CHANGE' event for sending workitem to approver when someone changes the parked document. In SWEL event trace, the 'CHANGE' event is not getting raised.
So i implemented a BTE 000002214 and now i am able to raise 'CHANGE' event and capture it in workflow. But this is only working when i park a document using FV50 transaction and later change it.
But when i park a document using FBV1 and then make changes from FBV2, the 'CHANGE' event is not being triggered in SWEL. Should i implement some other BTE like 2218 etc? Can you please help?

Hi Gokul,
You can try handling the SAVE event instead of the CHANGED event.
T-code FBV2 will not allow you to save the document unless you make some changes.
Try implementing BTE 2218 and revert.
Thanks,
Sreekanth

I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

Downloads changing from "Downloading" to "waiting to download". Why?

Tonight while downloading a HD movie I was watching a couple episodes of a TV show I have on my ATV. Between episodes I would check my download progress and find that the status had changed from "Downloading" to "waiting to download". Can't you watch videos and download something else at the same time?
I did update a photo library and perform a sync during one of the shows I watched. Does that indefinitely pause a download. The sync took less than one minute.
I'm glad there are a few people here that know everything about the ATV. Very helpful. Thanks, KMA

Have you included an href in the jnlp element ?
are you trying to version the jnlp file too ?
/dietz

Have a 1st generation Apple TV, which is not showing as a device in iTunes. Had no problems with Apple TV until I changed from a Windows PC to an iMac. I have changed my IP address, sub mask address and router address in the Apple TV, Can anyone help?

I have a 1st generation apple TV, which was working perfectly until I changed from a Windows PC to a Imac. The Apple TV will not show in Itunes. I have changed the IP address, sub mask and Router IP address. Since changing I have switched everything of and on again. Can anyone help?

I have a new router and computer. I have just remembered that just before my old PC died on me, I transferred my iTunes library to a hard drive. I can't remember exactly just how I got my library back, but there are definately things in my library now that were in my library on my old PC! Hope this makes sense. What do you mean by same location? Do you mean in the same place in the house?
Another difference I have just thought of was my old router was connected directly to the computer bu I have not been able to do this with Sky as my PC is not near a phone socket! Will this make a difference?

Status keeps changing from invisible to online: why the issue is ignored?

There is a serious issue raised in the parallel thread, which is critical for many people: "Status keeps changing from invisible to online" (initiated on ‎16-11-2014 by b.agne, Mac section). In short, when starting using a device, the Skype status changing from "invisible" to "online" - sometimes just for a moment, though enough for others to notice you. These affects very much any type of devices. I am sure the issue has already led to multiple personal crisises and potentially financial losses due to buseness partnership issues (I came close to that myself, and now use anything but Skype for business). The question is: WHY the issue is completely ignored by Skype, Microsoft and expert comunity? Please post the solution if anybody knows how to fix the issue, or suggest how to make Microsoft to know that it should be fixed. Kind regard...

Hi, I also have the same issue. I change the status to Invisible and a later on it is already as "Online", without having even touched/opened Skype. The only way that I see this may happen is that I have the app installed on the smartphone, but before it never had this issue, but from some month ago it started. Any correction or suggestion to work around this issue? Regards

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router. can I use my Airport Extreme as wireless router?

We currently have the following wireless home-network configuration, powered by Verizon DSL.
2 macbook pro’s
1 emachine
HP PhotoSmart 6122 all-in-one printer
Apple TV
Apple Airport Extreme Base Port A 1408
Westell 7500 router
Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port. The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
We now want to change from DSL to cable, thus ditching Verizon. Our new cable provider supplies the cable box, but no router for wireless networking.
Here are my questions.
Can I use the Airport Extreme (AE) as a wireless router?
If so, how should I hook it up? Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
If not, how should I be using the AE to some advantage? What can I get out of the investment?
Thank you very much for your help! Beatriz

What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

VAT Change from 4% to 5%

Similar Messages

Maybe you are looking for