VAT for 2011

Hi
We have a raise in VAT for 2011. I have added the new VAT % with valid from date 1.1.2011 to SAP.
If I now open a new sales order with delivery date for 2011, it should use the new, higher VAT, but it doesn't.
What do I have to do to be able to issue Sales Order confirmation with the new VAT for deliveries that will take place next year?
Thanks
Franz

I have a "SAP How To Guide" created by Michael Langenbach in which it says:
Das Anlegen dieser temporären Kennzeichen erfolgt entweder manuell oder per von SAP zur Verfügung
gestelltem Update-Query via Remote Support Platform.
-> ... manually or via Update-Query provided by SAP ...
I did check RSP, nothing there.

Similar Messages

  • Period for 2011 wrongly created as year instead of month

    We wrongly created the period for 2011 as year instead of Month. The problem is that we have many posted transactions with effective date Yanuary 2011.
    Is it possible to redefine the periods to use 12 months for 2011 without restoring from a backup?
    We don`t have the corresponding backup to go back when the period for 2011 was not created.
    Regards
    Jorge Manzo

    Thank You Gordon.
    We have only the backups for Dec 16, 2010 To Yanuary 7, 2011.
    We restored the backup for Dec 16,2010 but at that date, the period for 2011 was already created. Unfortunatelly we don`t have any other backup.
    I found a PDF document (in sap-bo in action) which name is "how to correct posting periods". In that document recomends to restore a backup with no 2011 transactions posted, and add the delta information. Another choice is to "close" the period "Yanuary" and create a new fiscal year starting from february to dec 2011, what do you think about these recommendations?
    Regards
    Jorge Manzo

  • Maintain no. range for object j_1irg23d, for 2011, excise group,

    Hi experts,
                        I m doing a depot sales process STO done, delivery done, Invoice done and excise invoice done, Now while MIGO
    the error is coming maintain no. range for object j_1irg23d, for 2011, excise group . in j1i9 i have maintained all the no. ranges for all the registers in all the plants and excise groups. Then too the error is coming. plus in MIGO the base value in excise duty tab in not been picked, i have to give manually. is that procedure correct?
    Thanks
    Prashant

    Hi all,
    I just made a silly mistake like other no. ranges i gave the serial no. of the number range as 10 or 20 which was wrong it has to be from the start i tried putting it as 01 the no. range picked up.
    Regards
    Prashant

  • Need new disk for 2011 Mac Mini i5 with Radeon 6630M

    I need a new disk for 2011 Mac Mini i5 with Radeon 6630M
    Will this fit?
    Western Digital 2.5 inch Scorpio Black 750GB 7200rpm SATA 16MB Internal Hard Drive WD7500BPKT
    Will I need special screwdrivers or tools?

    Wow, I worked on my MacMini after watching the video.
    But BEWARE!
    That OWC video misses a crucial step! (I emailed them)
    My MacMini had a bit of "invisible" black tape holding the disk connector to the disk, very hard to see. When I pulled off the connector, it came apart !
    That bit of tape must be something Apple added, or some manufacturers added, but it really messed me up. I had to send my MacMini off to be repaired, at a cost about $200 including parts and labour.

  • 1099 Form for 2011

    Hi Experts,
    We  have got an request where need to update 1099 Form for this year, but I am not clear whether I should do 2011 year update or should we do 2012 update.(Smart Forms) SAP has released note for 2011 not for 2012.
    Thanks in advance.
    Shilpa

    Hi All,
    the note I informed you some time ago, note number 1796096, was released today. You may refer to this note for the smart form changes.
    1796096 US legal change 2012 - Form changes
    Kind Regards,
    Mateus Grings

  • Incoming payment VAT for exchange difference

    I need to post the Incoming Payment (F-28 or F-36), with VAT tax about the exchange difference.
    When simulate the post, appears the automatic position with the exchange difference but do not appears the VAT for this difference. Anybody know where customizing?

    Please check this link
    Exchange Rate configuration
    thanks
    SKKS

  • VAT for Spain

    Hello all,
    could you, please, help me with this?
    Since 1st of january spanish VAT numbers validations rules seems to have changed.
    Up to now we have noticed that letters have been added in 3rd and last position:
    For example: ESW0601104C 
    ESY0041572W
    The setup in SPRO for Spanish vendors only indicate the lenght of the VAT for Spain but not its composition and it seems that this is SAP dependant configuration.
    Can you please have a look where this configuration is and if there is an OSS note related to this subject?
    Thanks a lot and I wish you a nice day
    regards
    Hana

    Hello ,
    thanks for this note, it helped me a lot
    but still have a question.
    At the moment we have got in our system the following letters to be used as a first digit:
    A, B, C, D ,E ,F ,G ,H ,P , Q, S so witg the note you sent to me (thanks once more) we would get letters like U, R, V, J, W
    but the VAT that we need to use in SAP for vendor is ESY0041572W , which means Y as a fisrt digit
    Plus we were asked for more letter L M K X Y N
    can you, please, let me know if those letters are available aslo somewher?
    Thanks a lot for letting me know
    regards
    Hana

  • VAT for purchased materials

    Dear All,
    We have purchased 10 Diff materials with with 4% VAT Cr & At the end of month my client will decide to avail the 80% VAT for only 4 materials and 20% wants to add into the material cost. It will be decided on the base of consumption of materials
    For remaining 6 materials wants to avail credit of 100%. How to achieve this ?
    Any idea
    regds,
    CB

    Hello ,
    As i understand , based on the consumption , the nature of the material is defined  & hence subsequently it is decide whether the VAT on the material is deductible or Non deductible .
    Unfortunately , your client will have to define at the time of procurement itself , if the VAT shud be deductible of non deductible .
    This is so because , a tax/duty once levied will not change . A change wud ask for reversal of the entire procurement cycle.
    Regards
    Anis

  • VAT for Ireland

    Hi experts!!
    I would like to know if someone could help me.... I have to customize VAT for ireland.
    I tried to put the group number for tax base amount but the number of characters is only 2 (numerical) in SAP and i have some group number in the irish VAT trading details with 3 characters and alphanumerical.
    Do you have an idea on how to configure VAT for Ireland?
    Thanks in advance,
    Chris

    question cancelled

  • VAT for capital goods

    Hi Friends,
                                I have created a tax code with VAT for Captal goods JVCD. But in PO itself it's values is not getting. I have to activate this condition type ,I think. Can any body please convey, How to activate this condition type JVCD?
    Regards

    U r using TAXINN(i think)
    go to FV11 and maintain the condition record of JCVD.based on the access sequences ur having.
    that is the only way to get values in PO.
    regards,
    sujit

  • Why no ICS update for 2011 Xperia WT19i after August 2012

    Hi Sony
    Since long we are waiting for ICS update after 4.1.B.0.587 for 2011 Xperia Phone.  After August 2012, Not Update received.  Even 4.1.B.1.13 has been certified in December 2012. But Sony did'nt released any update after August 2012.  I am facing problem so many problem after ICS update of Aug 2012 4.1.b.0.587.  Camera problem (after flash light on takes more time to take photograph) lagy Dialer, LED problem, network selection  phone goes in WCDMA(pref.) / GSM from GSM ONLY ,when we restart mobile.2G/3G etc.etc.).

    Unfortunately we don't have any information on upcoming updates at all. All information is available at our blog:
    http://blogs.sonymobile.com/update
    There are already a ton of threads concerning updates.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Does anyone know why there are no football apps for the iPhone for 2011

    does anyone know why there are no football apprs for the iphone for 2011
    I had apps last year for NFL schedules and also for college
    can't find even one this year
    anybody know

    If this is true, then it is because no one is making these apps.
    Why else would it be?

  • What is the best protective case for 2011 13" Macbook Pro

    What is the best protective case for 2011 13" Macbook Pro (that can withstand an active 4 year old :).   My 4 year old plays with the teaching apps on my iPhone 4 in the otterbox case and its great - the bulkiness of the otterbox not an issue and I love being able to give the phone to him and feel completely comforatable. I would love to find something to protect my Macbook Pror. Thanks for any help!! 

    I would definitely go for a Hardsheel or a Perforated Hardshell Case

  • PI survey for 2011 - please check it out

    Hi,
    I'd kindly like to ask you to fill out the PI survey for 2011
    http://www.surveymonkey.com/s/P8T25S9
    it was prepared by the Global Special Interest Group for Process Integration (GSIG)
    which is in direct contact with SAP and will try to influence SAP with everything that
    we will put in this survey - so it's quite important to have as many inputs as possible
    Thank you,
    Regards,
    Michal Krawczyk

    Hi,
    thanks
    please put the technical and everything else into the survey directly (not only on the WIKI) - the survey will be heavily checked
    Thank you,
    Regards,
    Michal Krawczyk

  • Material Document Number range for 2011

    Hi,
    As per standard practice we need to reset the number range for material document for calendar year 2011. New Number range will be effective from 01.01.2011.  Please let me know the below -
    1.     Step by step process for Number range assignment for Material document (GR / GR / Transfer posting) for 2011
    2.     Can we define Material document number rage financial year wise (Apr to Mar) like other FI documents number range? This issue is raised by finance dept. IF yes what will be the process?
    At present Number range assignment for our company is showing Year as 9999, from number 5000000000 and to number 5000000000
    Whether it is mendatory to re-ser number range.
    Thanks,
    Ranjan Kumar
    Edited by: Ranjan.pearl on Dec 29, 2010 2:51 PM

    Number ranges for Material document are maintained in OMBT.
    But there is no need to maintain different number ranges for material document as same as financail document. Financial documents are year based whereas material documents are not.
    Also if you are maintaining the material document number ranges as per year specific, then also same document number cant be used. But in case of financial document, the document number can be same i.e year specific.
    Different number ranges for Material Document :-
    Then assign the specific interval for a specific year like
    Year      From Number           To Number
    2001      0100000000     0199999999
    2002      4900000000     4999999999
    2003      5000000000     5999999999
    2004      0200000000     0299999999
    Still any queries, revert back.

Maybe you are looking for

  • Is there a way to open Adobe Camera Raw without Photoshop starting?

    Is there a way to start up Adobe Camera Raw without Photoshop starting?  I think in the past it started without Photoshop starting; or did it?

  • How do I control the compare button on ESX24

    I am playing around with the ESX24. I load an acoustic piano setting and when I start playing around with settings, some of them seem to turn the "compare" button on and the sound goes bad, meaning it changes it so that it doesn't sound like the pian

  • Songs not transfering from itunes to ipod

    I use limewire to downlod music, there is a limewire folder on my itunes source tab, but when I connect my ipod, it only transfers what is in the other folders. Do I have to change a setting or something? I see all of the songs there, just can't get

  • Have a problem while installing Asmlib packages

    hi all I have some problem while installing ASMlib packages. my OS=Redhat linux 5.3 kenel version using this command uname -r=2.6.18-128.el5 I have downloaded packages and successfully installed following 4 oracleasm-support-2.1.7-1.el5.i386.rpm orac

  • Renaming instance variable VS use of "this."

    Open Topic: Do you prefer this code? private var _myVar:int; public function myClassConstructor(value:int) {      _myVar = value; or this code? (JAVA style) private var myVar:int; public function myClassConstructor(myVar:int) {      this.myVar = myVa