VAT should post based on PO date or GR date not based on MIRO posting date

Hi,
Based on posting date in Invoice(MIRO) & condition record validity period, VAT is calculated & posting on invoice posting.
Condition record for VAT condition type with tax code(T9):
01.01.2011 to 31.01.2011-------> 4%
01.02.2011 to 28.02.2011------->12%
01.03.2011 to 31.03.2011------->14.5%
PO created and GR done on February & invoive done on March and syatem calculated VAT amount perfactly based on validity period maintained in condition recod and invoice posted.
But requirement is system should post invoice VAT amount as mentioned in the PO ( based on PO date) or GR date to post during Invoice posting in MIRO
Regards,
Biju K

Hi,
Any other input?
Regards,
Biju K

Similar Messages

HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service"

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..

Where did you purchase it from? There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked. These phones are subject to re-locking to the original carrier, particularly when updated.

Commitment item not picking while MIRO posting for Service entry sheet

Hi to all,
We have activated Fund Management in middle of the year where there were purchase order completed to till MIGO. When we do MIRO now system unable to pick commitment item from FMDERIVE.
We have created Commitment item as 50/3 combination ( No budget check ) and assigned to GR/IR clearing account.
We also activated trace in FMDERIVE and checked MIRO posting and found that derivation is working properly but while posting it is triggering error.
Some one advise me as it affected daily activities.
Thanks & Regards,
Y.Kiran Babu

Hi,
For the purchase order completed and the related MIGO created before FM was implemented, you need to run FMCN and FMCT.
I will explain to you in detail all the information related to the matter.
First of all, it seems to be in your PO that does not have FM account assignment (funds center and commitment item) in account assignment TAB. In addition, the error occurs usually also because in your SES the FM account assignment is missing.
For GR and IR documents FM always takes the major part of the FM account assignment from the PO.
You can fill these account assignments by using the programs RFFMCHAN/RFFMCHAT.
FMCN/FMCT must be run for the first document in the chain, which is the PO in case you don't have a PR assigned to this PO or an earmarked fund document. If you have PR's assigned to the PO's please run FMCN/FMCT for the PR first.
When executing the FMCT transaction, ALL documents selected in one group must be tested and processed successfully TOGETHER. If any one document fails, the ENTIRE group is shown as in error.
Therefore, first step is to ensure that the reference PO has a valid FM account assignment and is updated in FM. This should be done by FMCN/FMCT and subsequent posting with FMN4N (see reconstruction note 189761).
The SES itself might not be changed by FMCT. Therefore you should fulfill the FM account assignments in SES manually or with a custom program.
Please check also your table FM01X. As an alternative solution, you can enable one of these flags in table FM01X, depending on your business needs:
FLG_PO_PROTECT if you want to always inherit the fm account assignment from the reference PO and therefore skip FMDERIVE
FLG_FMDERIVE_FORCE if you always want to force a call to fmderive in all cases
FLG_SES_OVERWRITE in services, if you wish to overwrite the account assignment from the SES with the derived values from FMDERIVE.
You can find more information about it in text part of notes 1146677 and 923672.
FMDERIVE is skipped for GR/IR lines and the Commitment item is inherited from the PO regardless of whether or not the GR/IR line is FM relevant. This is SAP standard behavior.
If you want to force the Commitment item to be derived from the GL account for the GR/IR line, you can use the FLG_FMDERIVE_FORCE flag as described in note 923672. This will allow FMDERIVE to be called for these lines. Please be sure to fully test this to ensure that FM account assignments that you do not want to be overwritten are not incorrectly derived.
Bear in mind that for PO´s that does not have account assignment you should run FMCN/FMCT + FMN4N. For this you would need to check the flags and which one is more related to your needs. With the appropriate flag marked in FM01X (active with X) you should be able to run the transactions without any issue.
Based on note 189761, after doing all the previous suggestions and the issue does not appear anymore, I suggest you to run the following programs:
1) FMN0 for this PO/GR to see if the actual values are correct in FM table FMIFIIT (FM actual line items).
2) Run report RFFMRC04 (transaction FMAF). The reconstruction programs always update the totals records in Funds Management. Therefore, you do not normally need to reconstruct the totals records. However, if you suspect there are data inconsistencies in the totals records, you can analyze and correct these using the report RFFMRC04 (transaction FMAF).
If you correct the totals records, you must do this before you reconstruct the assigned values (see below).
3) Run reconstruction for AVC
You can also reconstruct the assigned values using the following tools:
    o Report BPINDX03 (transaction FMBV) for former budgeting
    o Report RFFMAVC_REINIT (transaction FMAVCREINIT) for the Budget
       Control System (BCS)
Make sure that no other system activities (postings, budgeting) are carried out during a reconstruction (commitment/actual or assigned values).
I believe that this resolve your inquiry.
Best Regards,
Vanessa.

I can't change the date on my photos. i click on adjust change and date and it does not give me the earliest date to change

I can't change the date on my photos in events. I click on adjust date and time of selected photos and the date that I can edit is the oldest photo date and not the earliest. Help?

iPhoto should be showing you the date of the first photo you selected.
What do you want to achieve? It should not matter, which photo you select to adjust the time, because all photos will be corrected by the same fixed increment, if you use "Adjust Date and Time".
If you want to set all photos to the same time, use "Photos > Batch Change > Set Date to" instead.

Could not activate cellular data network. you are not subscribed to a cellular data service

what does this mean?

It means you are either
a) not subscribed to a data plan
b) your account is provisioned incorrectly
c) you are using an unsupported carrier whose data network is not compatible with the iPhone
or
d) you are completely out of range of your carriers data network.
If:
a) sign up for a data plan
b) call your carrier
c) call your carrier and try to work it out with them
d) go someplace where you get data coverage.

Date time field will not bind over into XML data file

am using the Current Date field in a form that is supposed to give me the current date & time. In the Object, Value, I am using a "calculated - Read Only" , with Run-time property of Date and Time. WHen I view this as a PDF, the current datae & time display on the form as well as when I view the body pages, the {current date/time} is displayed in the actual field of the form. My only problem is I want to bind this so I can export the data to an XML data file, to import to an Access Database. WHen I use these settings, I do not have a "binding" tab to use. WHen I change vaule to "calculation script), it then pops up the binding tab and let's me export the field to the XML data file, but the data in that field is not comming over (the date & time). The field comes into the database inport, but is blank. What am I doing wrong..?? Thanks in advance for any suggestions...

Well, I'm assuming that when you change it to a calculation script you see the date in the PDF and therefore have the script to set the value written properly. So, if you change the binding from None to Normal or an explicit binding the date will be exported in the data. If all of that is correct, then the most likely problem is the data format you are exporting is not a format that your database will accept.
Chris
Adobe Enterprise Developer Support

Date Picker Alingment is not proper when we open Date in new Tab

We are facing Date Picker Alignment issue with Safari 5 browser on MAC 10.7.3. Our application is developed in Seam framwork ( which includs JSF and EJB). The issue which we are observing as follows-
There are some links on our application JSF page which opens Date in new window. But when we enable option for opening in tab always and click on Date link, Alingment of new tab opened is not proper.
Please suggest the possible action or pointers to work on this issue.
Images
Date Opened in new Window:
Date Opened in new Tab, Alingment is not proper:
Thanks in advance

Here is more info to describe the issue.
These are the movies sent to the Apple Engineers to show how our
workflow has worked for 7 years until Safari 4 came out.
Again this has caused us to go back to 10.5.8 though we enjoyed some of Snow Leopards improvements.
Have your sound on when listening to safari4 so you can hear the overlaps.
http://jenniradio.com/movies/safari3.m4v
http://jenniradio.com/movies/safari4.m4v
Would really like this fixed.
Ian

IOS 5.01 - "Could not activate cellular data network-You are not subscribed to a cellular data service"

I now get this message since updating to iOS 5.01 - it won't work on my 3G anymore - anyone else have same issue and/or know how to fix it?!!!!

I changed my DNS settins so they point to OpenDNS DNS servers
On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
change DNS by adding ( + )
208.67.222.222
then
208.67.220.220
click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

Since last software update, pre-paid internet does not work anymore. Get "you have not signed up for a data plan" message. Pre-paid acct is in order! What's up???

I have had an iPad 3G for more than a year now. I did not get it with a SIM card, since I expected to use almost completely at home, where we have wireless internet. Eventually, I decided it would be handy to be able to take it on the road, and signed up for pre-paid Internet with KPN (national Dutch telecommunications company). That worked fine, until the last big iPad software update. Since then, whenever I try to make a connection outside the house, I get the following message…
Mobile Data Account
You have not signed up for a data plan.
Would you like to set up a new account?
If you don’t, you can do it later in Settings.
…with the options of ‘Later’ or ‘Now’ to press. If I press Now, I get a screen “Please wait while the page is loading – this should only take a few seconds to complete.” But it never does, the ball just keeps spinning and spinning and spinning….
To my mind, with pre-paid internet I should not HAVE to set up a Mobile Data Account in the first place. I’ve checked with KPN, and my account is completely in order. I’ve checked with the local Apple store, and the geniuses say they’ve never seen this. Can anyone help me?

I updated to 3.6.4 and when I went to NetFlix to watch the next show of a series, it said
something like
Installation complete, restart your browser.
I restarted browser, same problem. Restarted comp. Same problem.
I updated Adobe Flash 10.1, still same problem.
But able to watch some vids on other sites, but full screen gave me the big blank white screen with audio only, had to click around in the dark ( so to speak) to find the minimize button.
I did a System Restore to before the Firefox and Adobe updates.
I then did not update Firefox as recommended and went to NetFlix and wellah, i can view the movies again.
And Full Screen is fine.
I then experimented and updated Firefox only, went to NetFlix and got same msg with no viewable shows.
So did a System Restore once more.
Staying at 3.6.3 for a while longer until I know I can watch my movies.
I don't own a TV, so this is my only form of an occasional escape.
I do hope this is figured out soon.
With what I have done, it seems to be Firefox, Not Flash.
Good Luck to us all.

Ref2 on JE not populated for Credit Memos not based on another document

Version: (2007A)
Description of requirements: (Please provide a detailed description)
When the Setting in System Initialization\Document Settings \General tab\
Document Remarks Include is set to BP Reference Number, the Ref2 field on the Journal Entry for the document is populated with the BP Reference from the document. This is true for all documents, regardless of whether or not the document is based on another document, EXCEPT for AR and AP Credit Memos. In the case of Credit Memos, if the Credit Memo isnu2019t based on another document, the BP Reference isnu2019t written to the Ref2 field on itu2019s Journal Entry. Our customers have complained that this makes it very difficult for them to do their reconciliations as the Ref2 is blank on the reconciliations screen for these Credit Memos. If the Ref2 field were populated in the same manner as other documents, the Ref2 Field would contain the same BP Reference as the invoice(s) it should be reconciled with. We have been asked to request that this functionality be added in a future patch, as it would greatly simplify the customeru2019s reconciliation and save them a great deal of time and effort.
Business needs: (Please describe the impact on your business, if the functionality is not realized)
It is very difficult to reconcile our Credit Memos with the correct documents, as there is no reference available on the screen to connect them to the other documents. This requires a great deal of time researching which Credit Memo(s) should be reconciled with which Invoice(s).
Examples: (Please describe a typical example, how the functionality should work.)
When a Credit Memo (Purchase or Sales) not based on another document is created, the Ref2 field on the Journal Entry should be updated with BP Reference entered by the user on the Credit Memo.
Current Workaround: (Please describe the workarounds you are using at the moment)
None. Hours wasted trying to reconcile correctly.
Proposed solution: (Please suggest how the new functionality should work)
When a Credit Memo (Purchase or Sales) not based on another document is created, the Ref2 field on the Journal Entry should be updated with BP Reference entered by the user on the Credit Memo.
Regards,
Sally Weinrauch
Coastal Range Systems

hi,
so change field status group with trx <b>OB41</b>
A.

Cannot activate cellular data network you are not subscribed to

Cannot activate cellular data network you are not subscribed to a cellular data service. Never happened until I have switched to boost. I have spoken with them for hours and they say it's fine from their end and I've reset network settings, replaced my nano sim for my iPhone 5, restored my phone played with wifi on and off airplane mode on and off I don't know what else I can do. Please help me experts!

Under "settings / general / network" is your "Cellular Data" button set to "ON"?

Field not visible in maintain master data option

Hello experts,
maturity_date field is mapped and active in transformations.
but when i want to see data for it.
field not available in "maintain master data" option or "display data" option.
regards,
kv

you can search in se11 /bic/pmaturity_date.
and also is attribute only is checked in general tab.
bhaskar

VAT Rate is copied from Base Document, not taken from Invoice Posting Date

Hi,
With the recent VAT Rate change in the UK, the following issue has come to light.
If I have a sales order or delivery created in November 2008 the VAT rate is 17.5%, which is correct.
If I then invoice that document in December 2008, the VAT rate should be 15% in line with the VAT Setup screens.
However, the VAT rate on the new document remains at 17.5% even if the user changes the posting date. The VAT Rate is only corrected if the user changes the VAT rate on the transaction line to a completely seperate rate, and then back again.
For documents with many lines this is impractical. I have several customers who have complained about this who want reassurance that the issue will be resolved before the next VAT rate change in 12 months.
Regards

Please check the Note -> 1481238

MIRO Posting Date Based On MM Period Or FI Period

Dear Friends,
In miro posting date control based on MM period wise or Fi period wise. Please give the solution.
Thanks
Saravanan

miro posting date column controled by MMRV t.code or OB52 t.code
Thanks
Saravanan R

MIRO Baseline Date should be same as GRN posting date.

Dear sir.
While doing MIRO, the Baseline date should come default date as GRN posting Date. who i can achieve this.
Because in payment terms, the default baseline date is 1)no default 2)document date3)posting date4)entry date is there.with is it will not come.
if any user exit or BADI is there Pl send sir.
regards
jayareddy

Hi
Base Line Date
Not possible bt std sap.
Vijay
Edited by: Vijay on Apr 27, 2009 1:41 PM

VAT should post based on PO date or GR date not based on MIRO posting date

Similar Messages

Maybe you are looking for