Vault problem after upgrade to Aperture V3

I recently bought a new iMac and had the Apple Store transfer the files from my old one. I then upgraded Aperture to Version 3 and upgraded my existing Library. I had a couple of files that had not been sent to the Vault so I updated the Vault. That was a couple of hours ago and it looks like the update has hung at about one third of the way through and Aperture is unresponsive. Any ideas?

Perhaps I spoke too soon. I checked in the finder and it appears to be creating a new Vault file and has renamed the existing Vault to "Old WD Hard Drive Vault" Although the progress bar is only halfway there, the actual update seems almost finished. Will re-post later to advise the final outcome.

Similar Messages

Vault problems after upgrade to 3.3.2

Cannot backup to vault after most recent Aperture upgrade. It becomes unresponsive every time I try to do so. Anyone else experience this? If so, have you found a solution? Very frustrating for a "Pro" app I use every day.

Hello,
>> Now there are new table tags around every single date picker / popup LOV item and its' list icon which forces other items on the same line to the next one instead.
APEX 3.1 introduced the use of the <fieldset> tag, for wrapping compound items, like the date picker or popup LOV items. In the following, you can learn more about it, including some workarounds:
FIELDSET – new layout behavior in 3.1.1
>> Bad Oracle, bad!
For the very short term, and especially for upgraded applications, you might be correct; however, for the long run, this is a good move, because it creates uniformity in the ways we can handle all the APEX built-in item types.
Regards,
Arie.

Existing stacks not working after upgrading to Aperture 3

I am having an issue regarding my stacks after upgrading from Aperture 2 to the new Aperture 3. When I select any of my existing stacks that came over from my Aperture 2 library to Aperture 3's library, my stacks will not expand to show my images associated with that particular stack. Also, when I click to expand the stack, instead of showing how many images are in a stack, it shows "1 of x" (x being the number of images associated with that stack). When I go to unstack, it removes all of the stacked images, only leaving the pick visible in Aperture 3. This only happens with my existing stacks; it does not happen when I create a new stack in Aperture 3. Anyone else having this issue?!? Is there a solution to rectify this problem?

As strange as this sounds, I may have solved my own question! I created a new blank project, and then I took the photos from the "Photos" section in the Library, and clicked and dragged them in -- and low and behold, the stacks were there! It took the photos out of the original project and moved them to the new project -- stacks, edits, and all. If anyone else is having this issue, this might be the fix.

After upgrading to Aperture 3.4 it doesn't open anymore.

After upgrading to Aperture 3.4 it doesn't open anymore. Every listed suggestion in forums did not help.
After repairing till 99% Aperture closed. It happened with all my libraries, small and great. All of them can be opened in iPhoto.
After placing aperture.app to the trash can and putting it back to programs again, after a restart, I even couldn't find in preferences com.apple.aperture.plist file anymore. Apple please help!

After placing aperture.app to the trash can and putting it back to programs again,
How did you put it back to programs? The idea is to make a complete reinstall
The problem is:
There is a problem with the Aperture installer. In some cases the installation is not complete, if you update on top of a recent version.
For most posters here (there must be 20 and more discussions by now) it helped to reinstall Aperture after removing the Application from the Applications Folder and the reinstalling again.
If you installed Apperture initially from the boxed retail version, reinstall from the CD/DVD.
If you installed from the AppStore, download again from the AppStore.
If you unlocked the Trial or bought online previous to the AppStore, use the saved installer or download the Trial again.
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Upgrade immediately after installing the previous version; you cannot open your current library with the previous version.
Regards
Léonie
Just for the record:
To remove the preferences:
The Preferences are in your User Library, Preferences folder:
The User Library is hidden by default. You can reveal it from the Finder's "GO" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences" sub folder and remove the file
your Home Folder/Library/Preferences/com.apple.Aperture.plist.
But I'd try to reinstall first - removing the preferences will only be a temporary fix, and the crashing may occur again, if you do not fix the broken Aperture installation.

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Layouts problem after upgrade

Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
Since we upgrade SAP, the layout changed.
For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
What could it be?
Thanks in advance.

Hi!
lines are not duplicated, they just printed on different pages:
- if doc has just 2 lines - printed form is good
- if doc has 3 items, two of them are printed on the first page, 3d - on the second page
- if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
SAP re-installation for all users will take too much time. May be exist any other option that we can try?
we really appreciate your help
Natalia

After upgrading to Aperture 3 I had to 'upgrade' all files. When this was done, there was an Aperture 3 library and the original Aperture 2 library. Are the two libraries identical and can I safely trash the Aperture 2 library?

After upgrading to Aperture 3 I had to 'upgrade' all files. When this was done, there was an Aperture 3 library and the original Aperture 2 library. Are the two libraries identical and can I safely trash the Aperture 2 library?

If the upgrade completed successfully and you are running Aperture 3 on the converted library and you're sure all the images that were in the old library are in the new library then you could delete the Aperture 2 library.
However I'm the paranoid type and when it comes to deleting images I'm always hesitant. If you can fine a place to archive the old library that would be your a better option.
At a minimum I would keep the old library around for a month or so after switching to Aperture 3 just to make sure in case something pops up.
regards

Problem after upgrading to ICS 4.0.4

i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
thanx for your help

Do you have many pictures?
Have your tried to reinstall the phone software using SUS to check if the problem remains?
http://www.sonymobile.com/gb/tools/update-service/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Several problems after upgrading to iO6

My iphone is with multiple problems after upgrading to iOS 6. Applications are closing alone, the screen goes black and then back to the home screen. does not connect to internet (3G and Wi-Fi) connections as cutting. Throw another quick update to fix this, or do I have to change to the Galaxy SIII; Iphone is Terrible!!

Try the Padma extension.
*Padma: https://addons.mozilla.org/firefox/addon/padma/

Login problem after upgrade to mavericks

Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.

Hi cpuman8,
Thanks for visiting Apple Support Communities.
If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
Resetting the original administrator account password
In OS X Lion or later, you can reset your user password with your Apple ID.
OS X: Changing or resetting an account password
http://support.apple.com/kb/ht1274
Best Regards,
Jeremy

Apple TV problem after upgrading to iTunes 7.5

PROBLEM: After upgrading to 7.5, Apple TV no longer recognized iTunes and vice versa.
ATTEMPTED SOLUTIONS: Removed and reinstalled iTunes 7.5 from scratch. Reset @TV to Factory Defaults and reconfigured. Removed Apple TV from iTunes Preferences/Apple TV/Remove Apple TV.
iTunes no longer finds @TV, either in the Preferences/Apple TV pane, or in the Device List. Everything worked perfectly before the 7.5 upgrade. All other features and devices working fine. Have reviewed all postings and eliminated the possibility of firewall or port problems.
Suggestions welcome! Thanks.

I have partially resolved the problem. Something with the 7.5 upgrade changed the network protocols being used by the Apple TV... switching to a wired network from end to end with a full shut down and reboot has the @TV back online... I am still working on trying to solve the wireless side of the equation.

Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgra

I'm using iPhone 5
Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.

Basic troubleshooting
Reset
Restore with backup
Restore as new ( better )

Vault problem after upgrade to Aperture V3

Similar Messages

Maybe you are looking for