Vb 2012 use regex to substitute specific key words with specific replacements

I am creating a VB 2012 application in which I have a two-dimensional array containing a collection of specific (but case-insensitive) key words with their replacement words. I also have a very large series of String variables which I read sequentially
from a .CSV file.
What I want to do is to efficiently parse each String variable searching for any occurrence(s) of the Key words held in the array and substituting with their replacement.
I know I can use "standard" VB code to do this but my instinct tells me that using Regular Expressions might be far more efficient.
Never having attempted to use Regular Expressions before, but having just spent several hours attempting to research the subject online, I know I need some help, please.
Any advice or guidance will be gratefully received.
Paul J

Hello,
The 'Suggestions and Feedback for the Forums' forum is to give users a voice on Forums. Users can give suggestions for improvements or vote up suggestions and know that the Forums team is listening.
I'd ask in the
Visual Basic .Net Language forum on MSDN.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

Can't find "key words" with accentuated characters

Since I have installed Aperture 3, I can't find pictures with a "key word", if the key word contains an accentuated. Otherwise, it works fine. I have verified this many times. For example if I search for the word "érable", Aperture won't find the pictures, but if I search "rable", it will find all the pictures associated to those syllables. I have tried that with many words, with the same result. I also tried to search "erable" (without the acute accent on the "e") and Aperture did not find the pictures.
Since I use a lot of French accentuated words, this is a big problem.
Does anybody else have that problem?
Does somebody have a solution?
Thanks for helping.

I was able to replicate the problem on my system, all updates current. The best way to alert Apple is via the link provided right within Aperture. Go to the menu bar item *Aperture > Provide Aperture Feedback*.

How to use GREP to find one particular word with automatic hyphen?

I know I have in my text a word with automatic hyphen on the end of line, say Wo-rd.
How can I find it?
Thanks.

I think you might do better to edit the hyphenation in the Dictionary.
One reason words hyphenate incorrectly is the wrong language has been applied. Both spell checking and hyphenation rules are governed by the language selected for the text, and language is a character-level attribute so that you can select inidvidual words and assign a different language to them if you like.
If that's the probelm here, you can look for the word using find/change (without worying about the hyphen) and change the language for all instances.
In either case you will be far better off fixing the problem on a global scale in the document than you will be finding a particular instance of that word at the end of a line. Any editing you do in the future may cause the problem to reappear somewhere else.

How to use update trigger in sql server 2008 with specific column

Hello friends currently my trigger updates on table update, and I need to change this to only fire when specific column changes.
/****** Object: Table [dbo].[User_Detail] ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[User_Detail](
[sno] [int] IDENTITY(1,1) NOT NULL,
[userid] [nvarchar](50) NULL,
[name] [nvarchar](max) NULL,
[jointype] [nvarchar](50) NULL,
[joinside] [nvarchar](50) NULL,
[lleg] [nvarchar](50) NULL,
[rleg] [nvarchar](50) NULL,
[ljoining] [int] NULL,
[rjoining] [int] NULL,
[pair] [int] NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[User_Detail] table data ******/
SET IDENTITY_INSERT [dbo].[User_Detail] ON
INSERT [dbo].[User_Detail] values (1, N'LDS', N'LDS Rajput', N'free', N'Left', N'jyoti123', N'SUNIL', 6, 4, 4)
INSERT [dbo].[User_Detail] VALUES (2, N'jyoti123', N'jyoti rajput', N'free', N'Left', N'mhesh123', N'priya123', 3, 2, 2)
SET IDENTITY_INSERT [dbo].[User_Detail] OFF
/****** Object: Table [dbo].[User_Detail] trigger ******/
CREATE TRIGGER triggAfterUpdate ON User_Detail
FOR UPDATE
AS
declare @userid nvarchar(50);
declare @pair varchar(100);
select @userid=i.userid from inserted i;
select @pair=i.pair from inserted i;
SET NOCOUNT ON
if update(pair)
begin
insert into Complete_Pairs(userid,pair)
values(@userid,1);
end
GO
/****** Object: Table [dbo].[Complete_Pairs] Script Date: 05/22/2014 21:20:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Complete_Pairs](
[Sno] [int] IDENTITY(1,1) NOT NULL,
[userid] [nvarchar](50) NULL,
[pair] [int] NULL
) ON [PRIMARY]
GO
my query is TRIGGER triggAfterUpdate is fired only when pair column in User_Details table is update only and when we update other column like ljoin or rjoin then my trigger is not fired
please any one can suggest us how it can done or provide solution
Jitendra Kumar Sr. Software Developer at Ruvixo Technologies 7895253402

>select @userid=i.userid
frominserted i;
select
@pair=i.pair
frominserted i;
The code above assumes a single row UPDATE.
You have to setup the trigger for set processing like when 100 rows are updated in a single statement.
UPDATE trigger example: http://www.sqlusa.com/bestpractices2005/timestamptrigger/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Assign key words to a directory.

Is there anyway to catalogue a directory - maybe with key words or equivalent?? I have 560,000 images in about 3000 directories spread over 10 TB fo disk space. Essentally each directory is a shooting project. It would be nice to associate key words with the directories. This would allow simple retrieval of, for example, "all directories that contain SHOWJUMPING in ALBERTA in the WINTER". This would greatly assist me in finding images based on a customer request - or for my organization of art projects.

The only way I have found a workaround is to use a stack.
Copy and paste a jpeg image in the directory or subdirectry. Change the name to the directry and add a keyword to search by. Then stack with directroy. You can put in underneath so it does not show.
When you do a find (right clck on keyword and choose find to eliminate typing errors) it will bring up the jpeg. Seems to only work 2 directorys down, so experiment.
The other option is to use a script. I am really ignorant of scripts so visit the Bridge Scripting forum.

XML errors when running specific reports in SCCM 2012, using SQL Server 2008 R2 Reporting Services

I've posted this to the SCCM 2012 forum and only received one response so far that states that this is a known issue that has been discussed before and isn't easy to fix; I was not given any actual solution either. Since this involves SSRS I
thought I would try my luck here as well.
I'm having almost exactly the same problem as is referenced in this article: http://social.msdn.microsoft.com/Forums/uk/sqlreportingservices/thread/587a3319-bc54-4d30-bb3f-bb90a0c6ec50.  When
I try to run either of these reports (Computers with specific software registered in Add Remove Programs; Count of instances of specific software registered with Add or Remove Programs) I receive the XML error shown in the attached screenshot. I'm fairly
sure the problem is the same as the other admin was experiencing and I just need to remove the unprintable characters (of the application name) from the dbo.v_Add_Remove_Program column.
The error references 0xFFFF but I could not find what that exactly translates too, other than it appears to be at the end of the spectrum for Unicode characters. I used the following sql query to search for the 0xFFFF entry, but no results were found:
use CM_UV2
Select distinct
CHARINDEX(cast(0xFFFF as varchar(1)),DisplayName0),
DisplayName0
from
dbo.v_Add_Remove_Programs
Where
CHARINDEX(cast(0xFFFF as varchar(1)),DisplayName0) > 0
When I used the original hex value of 0x28 I get plenty of results returned with "(" in them so the query seems sound. One of the articles I was searching mentioned running the query manually using the Management Studio and looking for strange characters
there but I'm not sure how to do that.
Basically I just need help finding the offending character and removing it. I also need to be able to replicate this for other strings as this looks like an error that will reoccur whenever any new software appears that has weird encoding in the title.
Thank you in advance for any help given.
Über Random

Hi Uber,
This is a known issue that error occurs when running report "Count of instances of specific software registered with Add or Remove Programs" due to non-printable characters for XML. Based on internal research, the hotfix for this issue will be
included in the System Center 2012 Configuration Manager Service Pack 1.
As a workaround, you can remove the nonprintable character populated into the report parameter by referring to the following KB article:
http://support.microsoft.com/KB/914159
Hope this helps.
Regards,
Mike Yin
Mike Yin
TechNet Community Support

I would like to know what application I should use for this specific job. I have 6 photos in Iphoto, and I would like to print them out on one piece of paper with the title and key words showing. Please help.

My objective is to print photos on on 8 1/2 x 11 sheets of paper (4 per page). I want to include the photo title and the photo key words.
I am not sure how to go about doing this.

In iPhoto, create an album with the images you want to print.
Once created, open the album and select all the images (type Command + A)
Go to the menu View and make sure Titles and Keywords are checked.
Go to the menu File > Print
Choose Contact Sheet
In the lower right corner press the customize button
In the next window that opens, at the bottom of the window change the column slider to "2"
You should be good to go. If OK, then press Print at the bottom right corner of the window.
MtD
Message was edited by: Meg The Dog to fix typo

System encryption using LUKS and GPG encrypted keys for arch linux

Update: As of 2012-03-28, arch changed from gnupg 1.4 to 2.x which uses pinentry for the password dialog. The "etwo" hook described here doesn't work with gnupg 2. Either use the openssl hook below or use a statically compiled version of gnupg 1.4.
Update: As of 2012-12-19, the mkinitcpio is not called during boot, unless the "install" file for the hook contains "add_runscript". This resulted in an unbootable system for me. Also, the method name was changed from install () to build ().
Update: 2013-01-13: Updated the hook files using the corrections by Deth.
Note: This guide is a bit dated now, in particular the arch installation might be different now. But essentially, the approach stays the same. Please also take a look at the posts further down, specifically the alternative hooks that use openssl.
I always wanted to set up a fully encrypted arch linux server that uses gpg encrypted keyfiles on an external usb stick and luks for root filesystem encryption. I already did it once in gentoo using this guide. For arch, I had to play alot with initcpio hooks and after one day of experimentation, I finally got it working. I wrote a little guide for myself which I'm going to share here for anyone that might be interested. There might be better or easier ways, like I said this is just how I did it. I hope it might help someone else. Constructive feedback is always welcome
Intro
Using arch linux mkinitcpio's encrypt hook, one can easily use encrypted root partitions with LUKS. It's also possible to use key files stored on an external drive, like an usb stick. However, if someone steals your usb stick, he can just copy the key and potentially access the system. I wanted to have a little extra security by additionally encrypting the key file with gpg using a symmetric cipher and a passphrase.
Since the encrypt hook doesn't support this scenario, I created a modifed hook called “etwo” (silly name I know, it was the first thing that came to my mind). It will simply look if the key file has the extension .gpg and, if yes, use gpg to decrypt it, then pipe the result into cryptsetup.
Conventions
In this short guide, I use the following disk/partition names:
/dev/sda: is the hard disk that will contain an encrypted swap (/dev/sda1), /var (/dev/sda2) and root (/dev/sda3) partition.
/dev/sdb is the usb stick that will contain the gpg encrypted luks keys, the kernel and grub. It will have one partition /dev/sdb1 formatted with ext2.
/dev/mapper/root, /dev/mapper/swap and /dev/mapper/var will be the encrypted devices.
Credits
Thanks to the authors of SECURITY_System_Encryption_DM-Crypt_with_LUKS (gentoo wiki), System Encryption with LUKS (arch wiki), mkinitcpio (arch wiki) and Early Userspace in Arch Linux (/dev/brain0 blog)!
Guide
1. Boot the arch live cd
I had to use a newer testing version, because the 2010.05 cd came with a broken gpg. You can download one here: http://releng.archlinux.org/isos/. I chose the “core“ version. Go ahead and boot the live cd, but don't start the setup yet.
2. Set keymap
Use km to set your keymap. This is important for non-qwerty keyboards to avoid suprises with passphrases...
3. Wipe your discs
ATTENTION: this will DELETE everything on /dev/sda and /dev/sdb forever! Do not blame me for any lost data!
Before encrypting the hard disc, it has to be completely wiped and overwritten with random data. I used shred for this. Others use badblocks or dd with /dev/urandom. Either way, this will take a long time, depending on the size of your disc. I also wiped my usb stick just to be sure.
shred -v /dev/sda
shred -v /dev/sdb
4. Partitioning
Fire up fdisk and create the following partitions:
/dev/sda1, type linux swap.
/dev/sda2: type linux
/dev/sda3: type linux
/dev/sdb1, type linux
Of course you can choose a different layout, this is just how I did it. Keep in mind that only the root filesystem will be decrypted by the initcpio. The rest will be decypted during normal init boot using /etc/crypttab, the keys being somewhere on the root filesystem.
5. Format and mount the usb stick
Create an ext2 filesystem on /dev/sdb1:
mkfs.ext2 /dev/sdb1
mkdir /root/usb
mount /dev/sdb1 /root/usb
cd /root/usb # this will be our working directory for now.
Do not mount anything to /mnt, because the arch installer will use that directory later to mount the encrypted root filesystem.
6. Configure the network (if not already done automatically)
ifconfig eth0 192.168.0.2 netmask 255.255.255.0
route add default gw 192.168.0.1
echo "nameserver 192.168.0.1" >> /etc/resolv.conf
(this is just an example, your mileage may vary)
7. Install gnupg
pacman -Sy
pacman -S gnupg
Verify that gnupg works by launching gpg.
8. Create the keys
Just to be sure, make sure swap is off:
cat /proc/swaps
should return no entries.
Create gpg encrypted keys (remember, we're still in our working dir /root/usb):
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > root.gpg
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > var.gpg
Choose a strong password!!
Don't do this in two steps, e.g don't do dd to a file and then gpg on that file. The key should never be stored in plain text on an unencrypted device, except if that device is wiped on system restart (ramfs)!
Note that the default cipher for gpg is cast5, I just chose to use a different one.
9. Create the encrypted devices with cryptsetup
Create encrypted swap:
cryptsetup -c aes-cbc-essiv:sha256 -s 256 -h whirlpool -d /dev/urandom create swap /dev/sda1
You should see /dev/mapper/swap now. Don't format nor turn it on for now. This will be done by the arch installer.
Important: From the Cryptsetup 1.1.2 Release notes:
Cryptsetup can accept passphrase on stdin (standard input). Handling of new line (\n) character is defined by input specification:
if keyfile is specified as "-" (using --key-file=- or by positional argument in luksFormat and luksAddKey, like cat file | cryptsetup --key-file=- <action> ), input is processed
as normal binary file and no new line is interpreted.
if there is no key file specification (with default input from stdin pipe like echo passphrase | cryptsetup <action> ) input is processed as input from terminal, reading will
stop after new line is detected.
If I understand this correctly, since the randomly generated key can contain a newline early on, piping the key into cryptsetup without specifying --key-file=- could result in a big part of the key to be ignored by cryptsetup. Example: if the random key was "foo\nandsomemorebaratheendofthekey", piping it directly into cryptsetup without --key-file=- would result in cryptsetup using only "foo" as key which would have big security implications. We should therefor ALWAYS pipe the key into cryptsetup using --key-file=- which ignores newlines.
gpg -q -d root.gpg 2>/dev/null | cryptsetup -v -–key-file=- -c aes-cbc-essiv:sha256 -s 256 -h whirlpool luksFormat /dev/sda3
gpg -q -d var.gpg 2>/dev/null | cryptsetup -v –-key-file=- -c aes-cbc-essiv:sha256 -s 256 -h whirlpool -v luksFormat /dev/sda2
Check for any errors.
10. Open the luks devices
gpg -d root.gpg 2>/dev/null | cryptsetup -v –-key-file=- luksOpen /dev/sda3 root
gpg -d var.gpg 2>/dev/null | cryptsetup -v –-key-file=- luksOpen /dev/sda2 var
If you see /dev/mapper/root and /dev/mapper/var now, everything is ok.
11. Start the installer /arch/setup
Follow steps 1 to 3.
At step 4 (Prepare hard drive(s), select “3 – Manually Configure block devices, filesystems and mountpoints. Choose /dev/sdb1 (the usb stick) as /boot, /dev/mapper/swap for swap, /dev/mapper/root for / and /dev/mapper/var for /var.
Format all drives (choose “yes” when asked “do you want to have this filesystem (re)created”) EXCEPT for /dev/sdb1, choose “no”. Choose the correct filesystem for /dev/sdb1, ext2 in my case. Use swap for /dev/mapper/swap. For the rest, I chose ext4.
Select DONE to start formatting.
At step 5 (Select packages), select grub as boot loader. Select the base group. Add mkinitcpio.
Start step 6 (Install packages).
Go to step 7 (Configure System).
By sure to set the correct KEYMAP, LOCALE and TIMEZONE in /etc/rc.conf.
Edit /etc/fstab:
/dev/mapper/root / ext4 defaults 0 1
/dev/mapper/swap swap swap defaults 0 0
/dev/mapper/var /var ext4 defaults 0 1
# /dev/sdb1 /boot ext2 defaults 0 1
Configure the rest normally. When you're done, setup will launch mkinitcpio. We'll manually launch this again later.
Go to step 8 (install boot loader).
Be sure to change the kernel line in menu.lst:
kernel /vmlinuz26 root=/dev/mapper/root cryptdevice=/dev/sda3:root cryptkey=/dev/sdb1:ext2:/root.gpg
Don't forget the :root suffix in cryptdevice!
Also, my root line was set to (hd1,0). Had to change that to
root (hd0,0)
Install grub to /dev/sdb (the usb stick).
Now, we can exit the installer.
12. Install mkinitcpio with the etwo hook.
Create /mnt/lib/initcpio/hooks/etwo:
#!/usr/bin/ash
run_hook() {
/sbin/modprobe -a -q dm-crypt >/dev/null 2>&1
if [ -e "/sys/class/misc/device-mapper" ]; then
if [ ! -e "/dev/mapper/control" ]; then
/bin/mknod "/dev/mapper/control" c $(cat /sys/class/misc/device-mapper/dev | sed 's|:| |')
fi
[ "${quiet}" = "y" ] && CSQUIET=">/dev/null"
# Get keyfile if specified
ckeyfile="/crypto_keyfile"
usegpg="n"
if [ "x${cryptkey}" != "x" ]; then
ckdev="$(echo "${cryptkey}" | cut -d: -f1)"
ckarg1="$(echo "${cryptkey}" | cut -d: -f2)"
ckarg2="$(echo "${cryptkey}" | cut -d: -f3)"
if poll_device "${ckdev}" ${rootdelay}; then
case ${ckarg1} in
*[!0-9]*)
# Use a file on the device
# ckarg1 is not numeric: ckarg1=filesystem, ckarg2=path
if [ "${ckarg2#*.}" = "gpg" ]; then
ckeyfile="${ckeyfile}.gpg"
usegpg="y"
fi
mkdir /ckey
mount -r -t ${ckarg1} ${ckdev} /ckey
dd if=/ckey/${ckarg2} of=${ckeyfile} >/dev/null 2>&1
umount /ckey
# Read raw data from the block device
# ckarg1 is numeric: ckarg1=offset, ckarg2=length
dd if=${ckdev} of=${ckeyfile} bs=1 skip=${ckarg1} count=${ckarg2} >/dev/null 2>&1
esac
fi
[ ! -f ${ckeyfile} ] && echo "Keyfile could not be opened. Reverting to passphrase."
fi
if [ -n "${cryptdevice}" ]; then
DEPRECATED_CRYPT=0
cryptdev="$(echo "${cryptdevice}" | cut -d: -f1)"
cryptname="$(echo "${cryptdevice}" | cut -d: -f2)"
else
DEPRECATED_CRYPT=1
cryptdev="${root}"
cryptname="root"
fi
warn_deprecated() {
echo "The syntax 'root=${root}' where '${root}' is an encrypted volume is deprecated"
echo "Use 'cryptdevice=${root}:root root=/dev/mapper/root' instead."
if poll_device "${cryptdev}" ${rootdelay}; then
if /sbin/cryptsetup isLuks ${cryptdev} >/dev/null 2>&1; then
[ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
dopassphrase=1
# If keyfile exists, try to use that
if [ -f ${ckeyfile} ]; then
if [ "${usegpg}" = "y" ]; then
# gpg tty fixup
if [ -e /dev/tty ]; then mv /dev/tty /dev/tty.backup; fi
cp -a /dev/console /dev/tty
while [ ! -e /dev/mapper/${cryptname} ];
do
sleep 2
/usr/bin/gpg -d "${ckeyfile}" 2>/dev/null | cryptsetup --key-file=- luksOpen ${cryptdev} ${cryptname} ${CSQUIET}
dopassphrase=0
done
rm /dev/tty
if [ -e /dev/tty.backup ]; then mv /dev/tty.backup /dev/tty; fi
else
if eval /sbin/cryptsetup --key-file ${ckeyfile} luksOpen ${cryptdev} ${cryptname} ${CSQUIET}; then
dopassphrase=0
else
echo "Invalid keyfile. Reverting to passphrase."
fi
fi
fi
# Ask for a passphrase
if [ ${dopassphrase} -gt 0 ]; then
echo ""
echo "A password is required to access the ${cryptname} volume:"
#loop until we get a real password
while ! eval /sbin/cryptsetup luksOpen ${cryptdev} ${cryptname} ${CSQUIET}; do
sleep 2;
done
fi
if [ -e "/dev/mapper/${cryptname}" ]; then
if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
export root="/dev/mapper/root"
fi
else
err "Password succeeded, but ${cryptname} creation failed, aborting..."
exit 1
fi
elif [ -n "${crypto}" ]; then
[ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
msg "Non-LUKS encrypted device found..."
if [ $# -ne 5 ]; then
err "Verify parameter format: crypto=hash:cipher:keysize:offset:skip"
err "Non-LUKS decryption not attempted..."
return 1
fi
exe="/sbin/cryptsetup create ${cryptname} ${cryptdev}"
tmp=$(echo "${crypto}" | cut -d: -f1)
[ -n "${tmp}" ] && exe="${exe} --hash \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f2)
[ -n "${tmp}" ] && exe="${exe} --cipher \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f3)
[ -n "${tmp}" ] && exe="${exe} --key-size \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f4)
[ -n "${tmp}" ] && exe="${exe} --offset \"${tmp}\""
tmp=$(echo "${crypto}" | cut -d: -f5)
[ -n "${tmp}" ] && exe="${exe} --skip \"${tmp}\""
if [ -f ${ckeyfile} ]; then
exe="${exe} --key-file ${ckeyfile}"
else
exe="${exe} --verify-passphrase"
echo ""
echo "A password is required to access the ${cryptname} volume:"
fi
eval "${exe} ${CSQUIET}"
if [ $? -ne 0 ]; then
err "Non-LUKS device decryption failed. verify format: "
err " crypto=hash:cipher:keysize:offset:skip"
exit 1
fi
if [ -e "/dev/mapper/${cryptname}" ]; then
if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
export root="/dev/mapper/root"
fi
else
err "Password succeeded, but ${cryptname} creation failed, aborting..."
exit 1
fi
else
err "Failed to open encryption mapping: The device ${cryptdev} is not a LUKS volume and the crypto= paramater was not specified."
fi
fi
rm -f ${ckeyfile}
fi
Create /mnt/lib/initcpio/install/etwo:
#!/bin/bash
build() {
local mod
add_module dm-crypt
if [[ $CRYPTO_MODULES ]]; then
for mod in $CRYPTO_MODULES; do
add_module "$mod"
done
else
add_all_modules '/crypto/'
fi
add_dir "/dev/mapper"
add_binary "cryptsetup"
add_binary "dmsetup"
add_binary "/usr/bin/gpg"
add_file "/usr/lib/udev/rules.d/10-dm.rules"
add_file "/usr/lib/udev/rules.d/13-dm-disk.rules"
add_file "/usr/lib/udev/rules.d/95-dm-notify.rules"
add_file "/usr/lib/initcpio/udev/11-dm-initramfs.rules" "/usr/lib/udev/rules.d/11-dm-initramfs.rules"
add_runscript
help ()
cat<<HELPEOF
This hook allows for an encrypted root device with support for gpg encrypted key files.
To use gpg, the key file must have the extension .gpg and you have to install gpg and add /usr/bin/gpg
to your BINARIES var in /etc/mkinitcpio.conf.
HELPEOF
Edit /mnt/etc/mkinitcpio.conf (only relevant sections displayed):
MODULES=”ext2 ext4” # not sure if this is really nessecary.
BINARIES=”/usr/bin/gpg” # this could probably be done in install/etwo...
HOOKS=”base udev usbinput keymap autodetect pata scsi sata usb etwo filesystems” # (usbinput is only needed if you have an usb keyboard)
Copy the initcpio stuff over to the live cd:
cp /mnt/lib/initcpio/hooks/etwo /lib/initcpio/hooks/
cp /mnt/lib/initcpio/install/etwo /lib/initcpio/install/
cp /mnt/etc/mkinitcpio.conf /etc/
Verify your LOCALE, KEYMAP and TIMEZONE in /etc/rc.conf!
Now reinstall the initcpio:
mkinitcpio -g /mnt/boot/kernel26.img
Make sure there were no errors and that all hooks were included.
13. Decrypt the "var" key to the encrypted root
mkdir /mnt/keys
chmod 500 /mnt/keys
gpg –output /mnt/keys/var -d /mnt/boot/var.gpg
chmod 400 /mnt/keys/var
14. Setup crypttab
Edit /mnt/etc/crypttab:
swap /dev/sda1 SWAP -c aes-cbc-essiv:sha256 -s 256 -h whirlpool
var /dev/sda2 /keys/var
15. Reboot
We're done, you may reboot. Make sure you select the usb stick as the boot device in your bios and hope for the best. . If it didn't work, play with grub's settings or boot from the live cd, mount your encrypted devices and check all settings. You might also have less trouble by using uuid's instead of device names. I chose device names to keep things as simple as possible, even though it's not the optimal way to do it.
Make backups of your data and your usb stick and do not forget your password(s)! Or you can say goodbye to your data forever...
Last edited by fabriceb (2013-01-15 22:36:23)

I'm trying to run my install script that is based on https://bbs.archlinux.org/viewtopic.php?id=129885
Decrypting the gpg key after grub works, but then "Devce root already exists." appears every second.
any idea ?
#!/bin/bash
# This script is designed to be run in conjunction with a UEFI boot using Archboot intall media.
# prereqs:
# EFI "BIOS" set to boot *only* from EFI
# successful EFI boot of Archboot USB
# mount /dev/sdb1 /src
set -o nounset
#set -o errexit
# Host specific configuration
# this whole script needs to be customized, particularly disk partitions
# and configuration, but this section contains global variables that
# are used during the system configuration phase for convenience
HOSTNAME=daniel
USERNAME=user
# Globals
# We don't need to set these here but they are used repeatedly throughout
# so it makes sense to reuse them and allow an easy, one-time change if we
# need to alter values such as the install target mount point.
INSTALL_TARGET="/install"
HR="--------------------------------------------------------------------------------"
PACMAN="pacman --noconfirm --config /tmp/pacman.conf"
TARGET_PACMAN="pacman --noconfirm --config /tmp/pacman.conf -r ${INSTALL_TARGET}"
CHROOT_PACMAN="pacman --noconfirm --cachedir /var/cache/pacman/pkg --config /tmp/pacman.conf -r ${INSTALL_TARGET}"
FILE_URL="file:///packages/core-$(uname -m)/pkg"
FTP_URL='ftp://mirrors.kernel.org/archlinux/$repo/os/$arch'
HTTP_URL='http://mirrors.kernel.org/archlinux/$repo/os/$arch'
# Functions
# I've avoided using functions in this script as they aren't required and
# I think it's more of a learning tool if you see the step-by-step
# procedures even with minor duplciations along the way, but I feel that
# these functions clarify the particular steps of setting values in config
# files.
SetValue () {
# EXAMPLE: SetValue VARIABLENAME '\"Quoted Value\"' /file/path
VALUENAME="$1" NEWVALUE="$2" FILEPATH="$3"
sed -i "s+^#\?$${VALUENAME}$=.*$+\1=${NEWVALUE}+" "${FILEPATH}"
CommentOutValue () {
VALUENAME="$1" FILEPATH="$2"
sed -i "s/^$${VALUENAME}.*$$/#\1/" "${FILEPATH}"
UncommentValue () {
VALUENAME="$1" FILEPATH="$2"
sed -i "s/^#$${VALUENAME}.*$$/\1/" "${FILEPATH}"
# Initialize
# Warn the user about impending doom, set up the network on eth0, mount
# the squashfs images (Archboot does this normally, we're just filling in
# the gaps resulting from the fact that we're doing a simple scripted
# install). We also create a temporary pacman.conf that looks for packages
# locally first before sourcing them from the network. It would be better
# to do either *all* local or *all* network but we can't for two reasons.
# 1. The Archboot installation image might have an out of date kernel
# (currently the case) which results in problems when chrooting
# into the install mount point to modprobe efivars. So we use the
# package snapshot on the Archboot media to ensure our kernel is
# the same as the one we booted with.
# 2. Ideally we'd source all local then, but some critical items,
# notably grub2-efi variants, aren't yet on the Archboot media.
# Warn
timer=9
echo -e "\n\nMAC WARNING: This script is not designed for APPLE MAC installs and will potentially misconfigure boot to your existing OS X installation. STOP NOW IF YOU ARE ON A MAC.\n\n"
echo -n "GENERAL WARNING: This procedure will completely format /dev/sda. Please cancel with ctrl-c to cancel within $timer seconds..."
while [[ $timer -gt 0 ]]
do
sleep 1
let timer-=1
echo -en "$timer seconds..."
done
echo "STARTING"
# Get Network
echo -n "Waiting for network address.."
#dhclient eth0
dhcpcd -p eth0
echo -n "Network address acquired."
# Mount packages squashfs images
umount "/packages/core-$(uname -m)"
umount "/packages/core-any"
rm -rf "/packages/core-$(uname -m)"
rm -rf "/packages/core-any"
mkdir -p "/packages/core-$(uname -m)"
mkdir -p "/packages/core-any"
modprobe -q loop
modprobe -q squashfs
mount -o ro,loop -t squashfs "/src/packages/archboot_packages_$(uname -m).squashfs" "/packages/core-$(uname -m)"
mount -o ro,loop -t squashfs "/src/packages/archboot_packages_any.squashfs" "/packages/core-any"
# Create temporary pacman.conf file
cat << PACMANEOF > /tmp/pacman.conf
[options]
Architecture = auto
CacheDir = ${INSTALL_TARGET}/var/cache/pacman/pkg
CacheDir = /packages/core-$(uname -m)/pkg
CacheDir = /packages/core-any/pkg
[core]
Server = ${FILE_URL}
Server = ${FTP_URL}
Server = ${HTTP_URL}
[extra]
Server = ${FILE_URL}
Server = ${FTP_URL}
Server = ${HTTP_URL}
#Uncomment to enable pacman -Sy yaourt
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
PACMANEOF
# Prepare pacman
[[ ! -d "${INSTALL_TARGET}/var/cache/pacman/pkg" ]] && mkdir -m 755 -p "${INSTALL_TARGET}/var/cache/pacman/pkg"
[[ ! -d "${INSTALL_TARGET}/var/lib/pacman" ]] && mkdir -m 755 -p "${INSTALL_TARGET}/var/lib/pacman"
${PACMAN} -Sy
${TARGET_PACMAN} -Sy
# Install prereqs from network (not on archboot media)
echo -e "\nInstalling prereqs...\n$HR"
#sed -i "s/^#S/S/" /etc/pacman.d/mirrorlist # Uncomment all Server lines
UncommentValue S /etc/pacman.d/mirrorlist # Uncomment all Server lines
${PACMAN} --noconfirm -Sy gptfdisk btrfs-progs-unstable libusb-compat gnupg
# Configure Host
# Here we create three partitions:
# 1. efi and /boot (one partition does double duty)
# 2. swap
# 3. our encrypted root
# Note that all of these are on a GUID partition table scheme. This proves
# to be quite clean and simple since we're not doing anything with MBR
# boot partitions and the like.
echo -e "format\n"
# shred -v /dev/sda
# disk prep
sgdisk -Z /dev/sda # zap all on disk
#sgdisk -Z /dev/mmcb1k0 # zap all on sdcard
sgdisk -a 2048 -o /dev/sda # new gpt disk 2048 alignment
#sgdisk -a 2048 -o /dev/mmcb1k0
# create partitions
sgdisk -n 1:0:+200M /dev/sda # partition 1 (UEFI BOOT), default start block, 200MB
sgdisk -n 2:0:+4G /dev/sda # partition 2 (SWAP), default start block, 200MB
sgdisk -n 3:0:0 /dev/sda # partition 3, (LUKS), default start, remaining space
#sgdisk -n 1:0:1800M /dev/mmcb1k0 # root.gpg
# set partition types
sgdisk -t 1:ef00 /dev/sda
sgdisk -t 2:8200 /dev/sda
sgdisk -t 3:8300 /dev/sda
#sgdisk -t 1:0700 /dev/mmcb1k0
# label partitions
sgdisk -c 1:"UEFI Boot" /dev/sda
sgdisk -c 2:"Swap" /dev/sda
sgdisk -c 3:"LUKS" /dev/sda
#sgdisk -c 1:"Key" /dev/mmcb1k0
echo -e "create gpg file\n"
# create gpg file
dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > /root/root.gpg
echo -e "format LUKS on root\n"
# format LUKS on root
gpg -q -d /root/root.gpg 2>/dev/null | cryptsetup -v --key-file=- -c aes-xts-plain -s 512 --hash sha512 luksFormat /dev/sda3
echo -e "open LUKS on root\n"
gpg -d /root/root.gpg 2>/dev/null | cryptsetup -v --key-file=- luksOpen /dev/sda3 root
# NOTE: make sure to add dm_crypt and aes_i586 to MODULES in rc.conf
# NOTE2: actually this isn't required since we're mounting an encrypted root and grub2/initramfs handles this before we even get to rc.conf
# make filesystems
# following swap related commands not used now that we're encrypting our swap partition
#mkswap /dev/sda2
#swapon /dev/sda2
#mkfs.ext4 /dev/sda3 # this is where we'd create an unencrypted root partition, but we're using luks instead
echo -e "\nCreating Filesystems...\n$HR"
# make filesystems
mkfs.ext4 /dev/mapper/root
mkfs.vfat -F32 /dev/sda1
#mkfs.vfat -F32 /dev/mmcb1k0p1
echo -e "mount targets\n"
# mount target
#mount /dev/sda3 ${INSTALL_TARGET} # this is where we'd mount the unencrypted root partition
mount /dev/mapper/root ${INSTALL_TARGET}
# mount target
mkdir ${INSTALL_TARGET}
# mkdir ${INSTALL_TARGET}/key
# mount -t vfat /dev/mmcb1k0p1 ${INSTALL_TARGET}/key
mkdir ${INSTALL_TARGET}/boot
mount -t vfat /dev/sda1 ${INSTALL_TARGET}/boot
# Install base, necessary utilities
mkdir -p ${INSTALL_TARGET}/var/lib/pacman
${TARGET_PACMAN} -Sy
${TARGET_PACMAN} -Su base
# curl could be installed later but we want it ready for rankmirrors
${TARGET_PACMAN} -S curl
${TARGET_PACMAN} -S libusb-compat gnupg
${TARGET_PACMAN} -R grub
rm -rf ${INSTALL_TARGET}/boot/grub
${TARGET_PACMAN} -S grub2-efi-x86_64
# Configure new system
SetValue HOSTNAME ${HOSTNAME} ${INSTALL_TARGET}/etc/rc.conf
sed -i "s/^$127\.0\.0\.1.*$$/\1 ${HOSTNAME}/" ${INSTALL_TARGET}/etc/hosts
SetValue CONSOLEFONT Lat2-Terminus16 ${INSTALL_TARGET}/etc/rc.conf
#following replaced due to netcfg
#SetValue interface eth0 ${INSTALL_TARGET}/etc/rc.conf
# write fstab
# You can use UUID's or whatever you want here, of course. This is just
# the simplest approach and as long as your drives aren't changing values
# randomly it should work fine.
cat > ${INSTALL_TARGET}/etc/fstab <<FSTAB_EOF
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
/dev/sda1 /boot vfat defaults 0 0
/dev/mapper/cryptswap none swap defaults 0 0
/dev/mapper/root / ext4 defaults,noatime 0 1
FSTAB_EOF
# write etwo
mkdir -p /lib/initcpio/hooks/
mkdir -p /lib/initcpio/install/
cp /src/etwo_hooks /lib/initcpio/hooks/etwo
cp /src/etwo_install /lib/initcpio/install/etwo
mkdir -p ${INSTALL_TARGET}/lib/initcpio/hooks/
mkdir -p ${INSTALL_TARGET}/lib/initcpio/install/
cp /src/etwo_hooks ${INSTALL_TARGET}/lib/initcpio/hooks/etwo
cp /src/etwo_install ${INSTALL_TARGET}/lib/initcpio/install/etwo
# write crypttab
# encrypted swap (random passphrase on boot)
echo cryptswap /dev/sda2 SWAP "-c aes-xts-plain -h whirlpool -s 512" >> ${INSTALL_TARGET}/etc/crypttab
# copy configs we want to carry over to target from install environment
mv ${INSTALL_TARGET}/etc/resolv.conf ${INSTALL_TARGET}/etc/resolv.conf.orig
cp /etc/resolv.conf ${INSTALL_TARGET}/etc/resolv.conf
mkdir -p ${INSTALL_TARGET}/tmp
cp /tmp/pacman.conf ${INSTALL_TARGET}/tmp/pacman.conf
# mount proc, sys, dev in install root
mount -t proc proc ${INSTALL_TARGET}/proc
mount -t sysfs sys ${INSTALL_TARGET}/sys
mount -o bind /dev ${INSTALL_TARGET}/dev
echo -e "umount boot\n"
# we have to remount /boot from inside the chroot
umount ${INSTALL_TARGET}/boot
# Create install_efi script (to be run *after* chroot /install)
touch ${INSTALL_TARGET}/install_efi
chmod a+x ${INSTALL_TARGET}/install_efi
cat > ${INSTALL_TARGET}/install_efi <<EFI_EOF
# functions (these could be a library, but why overcomplicate things
SetValue () { VALUENAME="\$1" NEWVALUE="\$2" FILEPATH="\$3"; sed -i "s+^#\?$\${VALUENAME}$=.*\$+\1=\${NEWVALUE}+" "\${FILEPATH}"; }
CommentOutValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^$\${VALUENAME}.*$\$/#\1/" "\${FILEPATH}"; }
UncommentValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^#$\${VALUENAME}.*$\$/\1/" "\${FILEPATH}"; }
echo -e "mount boot\n"
# remount here or grub et al gets confused
mount -t vfat /dev/sda1 /boot
# mkinitcpio
# NOTE: intel_agp drm and i915 for intel graphics
SetValue MODULES '\\"dm_mod dm_crypt aes_x86_64 ext2 ext4 vfat intel_agp drm i915\\"' /etc/mkinitcpio.conf
SetValue HOOKS '\\"base udev pata scsi sata usb usbinput keymap consolefont etwo encrypt filesystems\\"' /etc/mkinitcpio.conf
SetValue BINARIES '\\"/usr/bin/gpg\\"' /etc/mkinitcpio.conf
mkinitcpio -p linux
# kernel modules for EFI install
modprobe efivars
modprobe dm-mod
# locale-gen
UncommentValue de_AT /etc/locale.gen
locale-gen
# install and configure grub2
# did this above
#${CHROOT_PACMAN} -Sy
#${CHROOT_PACMAN} -R grub
#rm -rf /boot/grub
#${CHROOT_PACMAN} -S grub2-efi-x86_64
# you can be surprisingly sloppy with the root value you give grub2 as a kernel option and
# even omit the cryptdevice altogether, though it will wag a finger at you for using
# a deprecated syntax, so we're using the correct form here
# NOTE: take out i915.modeset=1 unless you are on intel graphics
SetValue GRUB_CMDLINE_LINUX '\\"cryptdevice=/dev/sda3:root cryptkey=/dev/sda1:vfat:/root.gpg add_efi_memmap i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 pcie_aspm=force quiet\\"' /etc/default/grub
# set output to graphical
SetValue GRUB_TERMINAL_OUTPUT gfxterm /etc/default/grub
SetValue GRUB_GFXMODE 960x600x32,auto /etc/default/grub
SetValue GRUB_GFXPAYLOAD_LINUX keep /etc/default/grub # comment out this value if text only mode
# install the actual grub2. Note that despite our --boot-directory option we will still need to move
# the grub directory to /boot/grub during grub-mkconfig operations until grub2 gets patched (see below)
grub_efi_x86_64-install --bootloader-id=grub --no-floppy --recheck
# create our EFI boot entry
# bug in the HP bios firmware (F.08)
efibootmgr --create --gpt --disk /dev/sda --part 1 --write-signature --label "ARCH LINUX" --loader "\\\\grub\\\\grub.efi"
# copy font for grub2
cp /usr/share/grub/unicode.pf2 /boot/grub
# generate config file
grub-mkconfig -o /boot/grub/grub.cfg
exit
EFI_EOF
# Install EFI using script inside chroot
chroot ${INSTALL_TARGET} /install_efi
rm ${INSTALL_TARGET}/install_efi
# Post install steps
# anything you want to do post install. run the script automatically or
# manually
touch ${INSTALL_TARGET}/post_install
chmod a+x ${INSTALL_TARGET}/post_install
cat > ${INSTALL_TARGET}/post_install <<POST_EOF
set -o errexit
set -o nounset
# functions (these could be a library, but why overcomplicate things
SetValue () { VALUENAME="\$1" NEWVALUE="\$2" FILEPATH="\$3"; sed -i "s+^#\?$\${VALUENAME}$=.*\$+\1=\${NEWVALUE}+" "\${FILEPATH}"; }
CommentOutValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^$\${VALUENAME}.*$\$/#\1/" "\${FILEPATH}"; }
UncommentValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^#$\${VALUENAME}.*$\$/\1/" "\${FILEPATH}"; }
# root password
echo -e "${HR}\\nNew root user password\\n${HR}"
passwd
# add user
echo -e "${HR}\\nNew non-root user password (username:${USERNAME})\\n${HR}"
groupadd sudo
useradd -m -g users -G audio,lp,optical,storage,video,games,power,scanner,network,sudo,wheel -s /bin/bash ${USERNAME}
passwd ${USERNAME}
# mirror ranking
echo -e "${HR}\\nRanking Mirrors (this will take a while)\\n${HR}"
cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.orig
mv /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.all
sed -i "s/#S/S/" /etc/pacman.d/mirrorlist.all
rankmirrors -n 5 /etc/pacman.d/mirrorlist.all > /etc/pacman.d/mirrorlist
# temporary fix for locale.sh update conflict
mv /etc/profile.d/locale.sh /etc/profile.d/locale.sh.preupdate || true
# yaourt repo (add to target pacman, not tmp pacman.conf, for ongoing use)
echo -e "\\n[archlinuxfr]\\nServer = http://repo.archlinux.fr/\\\$arch" >> /etc/pacman.conf
echo -e "\\n[haskell]\\nServer = http://www.kiwilight.com/\\\$repo/\\\$arch" >> /etc/pacman.conf
# additional groups and utilities
pacman --noconfirm -Syu
pacman --noconfirm -S base-devel
pacman --noconfirm -S yaourt
# sudo
pacman --noconfirm -S sudo
cp /etc/sudoers /tmp/sudoers.edit
sed -i "s/#\s*$%wheel\s*ALL=(ALL)\s*ALL.*$$/\1/" /tmp/sudoers.edit
sed -i "s/#\s*$%sudo\s*ALL=(ALL)\s*ALL.*$$/\1/" /tmp/sudoers.edit
visudo -qcsf /tmp/sudoers.edit && cat /tmp/sudoers.edit > /etc/sudoers
# power
pacman --noconfirm -S acpi acpid acpitool cpufrequtils
yaourt --noconfirm -S powertop2
sed -i "/^DAEMONS/ s/)/ @acpid)/" /etc/rc.conf
sed -i "/^MODULES/ s/)/ acpi-cpufreq cpufreq_ondemand cpufreq_powersave coretemp)/" /etc/rc.conf
# following requires my acpi handler script
echo "/etc/acpi/handler.sh boot" > /etc/rc.local
# time
pacman --noconfirm -S ntp
sed -i "/^DAEMONS/ s/hwclock /!hwclock @ntpd /" /etc/rc.conf
# wireless (wpa supplicant should already be installed)
pacman --noconfirm -S iw wpa_supplicant rfkill
pacman --noconfirm -S netcfg wpa_actiond ifplugd
mv /etc/wpa_supplicant.conf /etc/wpa_supplicant.conf.orig
echo -e "ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=network\nupdate_config=1" > /etc/wpa_supplicant.conf
# make sure to copy /etc/network.d/examples/wireless-wpa-config to /etc/network.d/home and edit
sed -i "/^DAEMONS/ s/)/ @net-auto-wireless @net-auto-wired)/" /etc/rc.conf
sed -i "/^DAEMONS/ s/ network / /" /etc/rc.conf
echo -e "\nWIRELESS_INTERFACE=wlan0" >> /etc/rc.conf
echo -e "WIRED_INTERFACE=eth0" >> /etc/rc.conf
echo "options iwlagn led_mode=2" > /etc/modprobe.d/iwlagn.conf
# sound
pacman --noconfirm -S alsa-utils alsa-plugins
sed -i "/^DAEMONS/ s/)/ @alsa)/" /etc/rc.conf
mv /etc/asound.conf /etc/asound.conf.orig || true
#if alsamixer isn't working, try alsamixer -Dhw and speaker-test -Dhw -c 2
# video
pacman --noconfirm -S base-devel mesa mesa-demos
# x
#pacman --noconfirm -S xorg xorg-xinit xorg-utils xorg-server-utils xdotool xorg-xlsfonts
#yaourt --noconfirm -S xf86-input-wacom-git # NOT NEEDED? input-wacom-git
#TODO: cut down the install size
#pacman --noconfirm -S xorg-server xorg-xinit xorg-utils xorg-server-utils
# TODO: wacom
# environment/wm/etc.
#pacman --noconfirm -S xfce4 compiz ccsm
#pacman --noconfirm -S xcompmgr
#yaourt --noconfirm -S physlock unclutter
#pacman --noconfirm -S rxvt-unicode urxvt-url-select hsetroot
#pacman --noconfirm -S gtk2 #gtk3 # for taffybar?
#pacman --noconfirm -S ghc
# note: try installing alex and happy from cabal instead
#pacman --noconfirm -S haskell-platform haskell-hscolour
#yaourt --noconfirm -S xmonad-darcs xmonad-contrib-darcs xcompmgr
#yaourt --noconfirm -S xmobar-git
# TODO: edit xfce to use compiz
# TODO: xmonad, but deal with video tearing
# TODO: xmonad-darcs fails to install from AUR. haskell dependency hell.
# switching to cabal
# fonts
pacman --noconfirm -S terminus-font
yaourt --noconfirm -S webcore-fonts
yaourt --noconfirm -S fontforge libspiro
yaourt --noconfirm -S freetype2-git-infinality
# TODO: sed infinality and change to OSX or OSX2 mode
# and create the sym link from /etc/fonts/conf.avail to conf.d
# misc apps
#pacman --noconfirm -S htop openssh keychain bash-completion git vim
#pacman --noconfirm -S chromium flashplugin
#pacman --noconfirm -S scrot mypaint bc
#yaourt --noconfirm -S task-git stellarium googlecl
# TODO: argyll
POST_EOF
# Post install in chroot
#echo "chroot and run /post_install"
chroot /install /post_install
rm /install/post_install
# copy grub.efi file to the default HP EFI boot manager path
mkdir -p ${INSTALL_TARGET}/boot/EFI/Microsoft/BOOT/
mkdir -p ${INSTALL_TARGET}/boot/EFI/BOOT/
cp ${INSTALL_TARGET}/boot/grub/grub.efi ${INSTALL_TARGET}/boot/EFI/Microsoft/BOOT/bootmgfw.efi
cp ${INSTALL_TARGET}/boot/grub/grub.efi ${INSTALL_TARGET}/boot/EFI/BOOT/BOOTX64.EFI
cp /root/root.gpg ${INSTALL_TARGET}/boot/
# NOTES/TODO

Fluxbox/keys - two command using one combination of keyboard keys

I want to run 2 commands using pressing alt+v, it should be done using this command in fluxbox keys:
Mod1 V :MacroCmd {gksudo pon vpn-doma} {gksudo sh /home/r-c/.vpn-doma-routy}
but this doesnt work. I want to first execute this command: gksudo pon vpn-doma and after executing this: gksudo sh /home/r-c/.vpn-doma-routy
When I execute it separately in terminal, it works. ALso I restarted fluxbox enviroment. Can you help?

Are you now using a macro with {exec <command 1>} {exec <command 2>} ?
That may start them at the same time, but in the command I put above, the second command should not start until the first is complete (and returns true/success).
You could add delay, if needed, as follows
gksudo pon vpn-doma && sleep 1 && gksudo sh /home/r-c/.vpn-doma-routy
Edit: specifically
Mod1 V :exec "gksudo pon vpn-doma && gksudo sh /home/r-c/.vpn-doma-routy"
Ditch the macro, it should not be needed.
Last edited by Trilby (2012-03-25 15:45:21)

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run.

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run. I tried 7.0.4 and 7.1.2, both from Apple software update and both crash during "loading themes". I am reluctant to upgrade OSX from 10.7.5 because I do not want to loose Final Cut Express 4.0.1. Apple Care no longer supports iDVD. I want a version if iDVD that supports Chapter markers as in iDVD 7.?.? that i used with my old (now deceased) Apple Power PC Mac Pro.

iDVD 7 should work fine with 10.7.5. Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

Customer-Specific Key Figure and MCI3 analysis report

Hi,
We have created a "Customer-Specific Key Figures" in customizing and mapped the key with value category. But this new defined key figure is not available in the report MCI3.
How to get this figure in the analysis report MCI3 etc , i.e. how to update the information structure S115.
Regards

Hello,
You have to develope the new programme using that info structure and update that new value field in your customising logic programe .
Regards,
Rakesh

OSB11g - using Concatenation function in report key - Xpath

Hi,
I am trying to use Concatenation function on Report key Xpath. For that i am using Following Xpath Expressions But this expressions not valid when trying to validate. But same expressions are valid under different scenarios in OSB.
1.fn:concat(./bpel:process/bpel:input, ./bpel:process/bpel:input)
error msg(when validate):_
error: XPath expression invalid, not a selection: declare namespace jca = 'http://www.bea.
com/wli/sb/transports/jca'; declare namespace wsp = 'http://schemas.xmlsoap.org/ws/2004/09/policy';
declare namespace jms = 'http://www.bea.com/wli/sb/transports/jms'; declare namespace tp = 'http:
//www.bea.com/wli/sb/transports'; declare namespace wsa05 = 'http://www.w3.
org/2005/08/addressing'; declare namespace jejb = 'http://www.bea.com/wli/sb/transports/jejb';
declare namespace xs = 'http://www.w3.org/2001/XMLSchema'; declare namespace sftp = 'http://www.
bea.com/wli/sb/transports/sftp'; declare namespace flow = 'http://www.bea.com/alsb/flow/transport';
declare namespace soap-env = 'http://schemas.xmlsoap.org/soap/envelope/'; declare namespace wsu
= 'http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd'; declare
namespace dsp = 'http://www.bea.com/dsp/transport/sb'; declare namespace ejb = 'http://www.bea.
com/wli/sb/transports/ejb'; declare namespace bpel = 'http://xmlns.oracle.
com/Bpel_Actvities/Assign_Activity/BPELProcess'; declare namespace wsa = 'http://schemas.xmlsoap.
org/ws/2004/08/addressing'; declare namespace bpel-10g = 'http://www.bea.
com/wli/sb/transports/bpel10g'; declare namespace tuxedo = 'http://www.bea.
com/wli/sb/transports/tuxedo'; declare namespace file = 'http://www.bea.com/wli/sb/transports/file';
declare namespace ctx = 'http://www.bea.com/wli/sb/context'; declare namespace fn = 'http://www.w3.
org/2004/07/xpath-functions'; declare namespace soap12-enc = 'http://www.w3.org/2003/05/soap-
encoding'; declare namespace soap12-env = 'http://www.w3.org/2003/05/soap-envelope'; declare
namespace fn-bea = 'http://www.bea.com/xquery/xquery-functions'; declare namespace mq = 'http:
//www.bea.com/wli/sb/transports/mq'; declare namespace ws = 'http://www.bea.
com/wli/sb/transports/ws'; declare namespace http = 'http://www.bea.com/wli/sb/transports/http';
declare namespace soa-direct = 'http://www.bea.com/wli/sb/transports/soa'; declare namespace email
= 'http://www.bea.com/wli/sb/transports/email'; declare namespace sb = 'http://www.bea.
com/wli/sb/transports/sb'; declare namespace ftp = 'http://www.bea.com/wli/sb/transports/ftp';
declare namespace xsd = 'http://www.w3.org/2001/XMLSchema'; declare namespace soap-enc = 'http:
//schemas.xmlsoap.org/soap/encoding/'; declare namespace xsi = 'http://www.w3.
org/2001/XMLSchema-instance'; fn:concat(./bpel:process/bpel:input, ./bpel:process/bpel:input)
2. op:concatenate(./bpel:process/bpel:input, ./bpel:process/bpel:input)
While using this Xpath expression validation is sucessfull but concatenation operation is not working when checked in the message reports under operations tab.
Can any one help me on this.
Thanks in advance.

can you try assign concatenated value to some xml element first, like
assign : <value>{fn:concat(a,b)}</value> to e.g. value
and then report key ./text() in variable $value
Edited by: AigarsP on Jun 12, 2012 4:12 AM

Assigning instruments to specific keys on a USB keyboard

Is there a way to assign certain instruments to specific keys on a USB keyboard?
I use an M-Audio Keystation 49e USB keyboard. It works fine, but I have no experience with MIDI and don't know what the "advanced functions" button on the keyboard allows me to do, although I'm sure with some pointers I can figure it out.
(Some weeks back xs4ls recommended the JamPack 3 with the Studio Toolkit. Thanks for that recommendation. The stuff really improves upon the stock drumkit software instruments. But in the Studio Toolkit, certain instruments I might like to use together are often located more octaves apart than I can play at one time. The regular kits are generally organized on the keyboard such that I can play them "live" just like I do my actual drumset. This is how I prefer to lay down my drum parts. I'm also interested in assigning drum sounds from a various software kits to save as my own custom kit, if possible.)

GB3 has a "programmable keyboard" feature that isn't as slick as the stock instruments, but it's better than nothing! (one of the good features of GB3)
I found a bunch of old Qbert (the video game) noises on line, and created my own instrument with those. Pretty sweet.
X
p.s.
Happy you liked the suggestion. I wish I could take credit for making the Jam Pack......

Application specific key-value pairs in jndi.properties

Hello,
Can I specify my application specific key-value pair in jndi.properties?
I tried something like this
java.naming.factory.initial=.jndi.WLInitialContextFactory
java.naming.provider.url=t3://localhost:7001
myVar=myVal
When i tried looking up "myVar" from my client program, I got an error.
The other parameters like weblogic.jndi.WLInitialContextFactory are picked up.
Anyhelp will be appreciated
Vasim

We have a similar problem.
We would like to configure our PROVIDER_URL for a specific web application - not
for the entire server. Since the URL should be different in development, test
and production environments, we would prefer to just set it in the deployment
descriptor. And we have a lot of code that just uses
ctx = new InitialContext();
when looking up EJBs, queues etc.
Actually, to take the problem one step further, it should be expected that later
we will have EJB's deployed on different machines/clusters - so we will actually
need specific urls for each EJB.
Is there a good way to do this? Or will we have to custom-develop our own jndi
configuration standard using application parameters to set which JNDI provider
each EJB should be looked up with?
Alternativaely, can we "import" the JNDI trees of the app server in the JNDI tree
of the web servers?
So, how should we go about this?
Robert Patrick <[email protected]> wrote:
Vasim wrote:
Hi Robert,
You are right. But The object "myVar" which I am trying to look upis not in
the JNDI tree nor am I interesed in binding it . But my requirementis that
I have one application specific variable which I am trying to lookup and I
dont want to have a separare config file for this..and hence the question..So, put the properties you want in the jndi.properties file and load
the properties
file from your code by doing something like this:
Properties props = new Properties();
ClassLoader cl = Thread.currentThread().getContextClassLoader();
if (cl == null)
cl = System.getSystemClassLoader();
InputStream is = cl.getResourceAsStream("jndi.properties");
props.load(is);
Personally, I would not use this file and would create an application-specific
file
or, as Daniel suggested, define your properties as a System property
and use
System.getProperty("myVar").
btw, is jndi.properties only for those objects which are bound to jnditree?
jndi.properties is only used for creating the JNDI InitialContext. The
whole idea
of this file is that in remote client code (without the jndi.properties
file), you
need to do something like this to tell the JNDI classes how to connect
to the JNDI
provider:
Properties props = new Properties();
props.put(Context.PROVIDER_URL, "t3://myservername:7001");
props.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
InitialContext ctx = new InitialContext(props);
but inside the server, you only need to do this because the server is
the provider
and already knows how to connect to itself:
InitialContext ctx = new InitialContext();
Therefore, the jndi.properties file allows you to externalize this property-setting
code that sets up the properties to be passed to the InitialContext constructor
so
that the remote client code can now look exactly like the code inside
the server.
The InitialContext constructor will look for this jndi.properties file
in your
classpath and load it to get the necessary configuration information
to determine
how to connect to the JNDI provider.
Hope this helps,
Robert

Third Party keyboard- possible to "Use all F1, F2, etc. keys as standard function keys"?

I've got a 3rd party Anker slim mac keyboard (http://www.amazon.com/Anker%C2%AE-Bluetooth-Wireless-Keyboard-Tablets/dp/B005ONM DYE).
I really need to be able to use the F7 and F8 keys for my audio program (Pro Tools 10), but they always do the consumer-keys actions (rewind/play in itunes). Everywhere I look says to go to System Preferences and select the "Use all F1, F2, etc. keys as standard function keys" button, but since I have a third-party keyboard, that option does not exist. Using an applescript to try and do it anyway doen't work either. The closest I've gotten is using the freeware FunctionFlip, but that requires me to press and hold the Fn key to use them as function keys. I don't want that.
Is there ANY way, official or third party, free or paid, that I can get this to work without buying a new keyboard?
Thanks!
Computer is a late 2012 Mac Mini with Mountain Lion

Hello,
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php

Vb 2012 use regex to substitute specific key words with specific replacements

Similar Messages

Maybe you are looking for