VB Run time error '1004' in SEM BPS layout

Hi,
When I run a layout and activate the standard SAP macro, a Visual basic error message " Run Time error '1004' " appears.
This error has been resolved after I made the following settings.
TOOLS --> MACRO --> SECURITY --> Trusted Publishers --> check flag "Trust Access to Visual Basic Project".
Does each user has to make this setting? Isn't there a setting for SAP macros to attach a trusted digital signature that automaticaly takes care of this error w/o having each user make this setting?
I heard, a setting has to be made in Trusted Publishers to accept "SAPAG".
But, I don't see this in Trsuted publishers list.
I don't see this error in Excel 97 but in Excel 2003. How do I know which versions of excel gives this error to educate our users about this error.
Appreciate any help.

Hi anil1121,
Since this is not a vb.net issue, and based on your description, I would recommend you post this issue in
http://social.msdn.microsoft.com/Forums/en-US/home?forum=officegeneral forum to get supports.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Run-time error '1004' -- Method 'Container' of object '_Workbook' failed

Dear All,
One of our users is getting the following Microsoft Visual Basic error while running the report S_ALR_87013614.
Run-time error '1004'
Method 'Container' of object '_Workbook' failed.
I have searched the forum posts for help. But I only found some details related to Run-time error 1004 related to some excel file security but not related to "Method 'Container' of object '_Workbook' failed".
Could anyone please tell me how this error can be eliminated for the user?
Regards,
Lakshmi.

Dear Arpan,
We too observed a few PIDs along with the one that you have mentioned but they make no difference. Some users who has the PID G_RW_DOCUMENT_TYPE set with some value are getting the report.
Upon further searching we are assuming that it could be an issue with the Microsoft applications or macro settings of the user. But not sure about it.
Regards,
Lakshmi Venigala.

Run-time error '1004' Application-Defined or object-defined error

Hello friends,
My requirement is to make the cells under Columns Actual, forecast and target (Dimesnion Category) Locked.
I've used various methods like GetOnlyRange but it didnt work.
Now, i've selected all the cells of the sheet, where user can input and made them unlocked. ( from Right-click>FormatCells>Protection tab-->Locked checkbox unchecked)
Then, go to "review" tab, click "Allow Users to edit Ranges",-> Protect Sheet---> ticked "Unlocked Cells"
Then go to WorkBook Options and set a password for the worksheet.
But on expand, I'm facing Run-time error '1004' Application-Defined or object-defined error.
Please help.
Please help.

Hi,
I think that is VBA Runtime error, you can fix these errors by downloading in various sites.
http://www.articlesbase.com/data-recovery-articles/vba-runtime-error-1004-application-defined-or-object-defined-error-fix-these-errors--1339060.html
You can try with the above link. I hope this could solve your problem.
Regards,
B.S.RAGHU

Opening Input Schedule getting Run Time Error -1004

Hi
When i am opening few Input Schedules , i am getting this error message:
Run Time error -1004.
Cannot run the Macro 'auto open'. The Macro may not be available in this workbook or all macros my be disabled.
But when i am clicking on the END button in the Pop Up Window, i can go ahead with my Input Schedules.
Can you please throw some idea on the same.
Regards
Viv

Hi Nilanjan
Yeah i have saved it once in a xltm format through ParknGo option. But now i have savIing it the Input Schedule Folder in the following Path Location
C:\BPC\Data\Webfolders\<APPSET>\<APPLICATION>\EEXCEL\INPUT SCHEDULES.
So when i am opening the same from the above location i am getting the error.
Now i have change the name and save it as a xlt format and still getting the error.
Looking forward .
Thanks
Viv

EVDRE VBA run-time error 1004

Hi experts!
I try use a very simple code:
Dim aaa As String
aaa = "=EVGTS($B$2;$B$45;""CATEGORY:""&$D$2;""CHARGE_TY:""&$B$5;""CLNT_BRND:""&$B$6;""P_ACCT:""&""I"";""P_CC:""&$B$8;""P_ENTITY:""&$B$9;""P_SM:""&$B$10;""TRAF_KIND:""&$B$11;""QUAN_TY:""&$B$12;""MEASURES:""&$B$13;""TIME:""&""2012.TOTAL"")"
ActiveSheet.Range("a1").Value = aaa
It doesn't work. I get "Run-time error '1004': Application-defined or object-defined error". Without "=", VBA writes this text to cell
Dim aaa As String
aaa = "EVGTS($B$2;$B$45;""CATEGORY:""&$D$2;""CHARGE_TY:""&$B$5;""CLNT_BRND:""&$B$6;""P_ACCT:""&""I"";""P_CC:""&$B$8;""P_ENTITY:""&$B$9;""P_SM:""&$B$10;""TRAF_KIND:""&$B$11;""QUAN_TY:""&$B$12;""MEASURES:""&$B$13;""TIME:""&""2012.TOTAL"")"
ActiveSheet.Range("a1").Value = aaa
And if I add "=" manually to cell it works. What's wrong? How can I fix it? Please advice.
ActiveSheet.Range("a1").Formula = aaa
instead of
ActiveSheet.Range("a1").Value = aaa
also doesn't work
Regards,
Maxim

It's funny but it's works System replaces "," with ";" in cell and this code works:
Range("A1").Select
ActiveCell.Formula = _
"=EVGTS($B$2,$B$45,""CATEGORY:""&$D$2,""CHARGE_TY:""&$B$5,""CLNT_BRND:""&$B$6,""P_ACCT:""&""I"",""P_CC:""&$B$8,""P_ENTITY:""&$B$9,""P_SM:""&$B$10,""TRAF_KIND:""&$B$11,""QUAN_TY:""&$B$12,""MEASURES:""&$B$13,""TIME:""&""2012.TOTAL"")"

RABAX_STATE type of error while accessing SEM-BPS layout

Hi
I was trying to access SEM-BPS layout from CRM web UI. But i got following error:
CRM: Function Module "UPX_KPI_API_SET_PROP_TIMELINE" not found
The termination type was: RABAX_STATE
Can anyone please tell me how to resolve this problem?
Thanks,
Smruti

Hi Smruti,
I don't know about your problem, as I don't know CRM, sorry.
But for you info: It seems this RABAX_STATE occurs at every WD4A error.
Kind regards, Matthias

Run-Time error 1004 when VBA run Text-To-Column

Expert,
I got error message 1004 said "Excel can convert only column at a time, The range can be many rows tall but no more than one column wide, try again by selecting cells in one column only. my VBA code is this. If I copy B5 only, the Text-To-Column
is working. can you help ?
Sheets("Sheet1").Range("B5:E300").Copy
Sheets("Sheet2").Select
Range("A2:E300").PasteSpecial xlPasteAll
Columns("B:M").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Application.CutCopyMode = False
Selection.TextToColumns Destination:=Range("A1"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=False, _
Semicolon:=False, Comma:=True, Space:=False, Other:=False, FieldInfo _
:=Array(Array(1, 1), Array(2, 1), Array(3, 1), Array(4, 1), Array(5, 1), Array(6, 1), _
Array(7, 1), Array(8, 1), Array(9, 1), Array(10, 1), Array(11, 1), Array(12, 1)), _
TrailingMinusNumbers:=True
Thanks
James Liang

Re: text to columns error
You have four columns selected when you call text to columns, so ...
Replace the word "Selection" with Range("A1:A300") so it looks like...
Range("A1:A300").TextToColumns Destination:=Range("A1"), DataType:=xlDelimited, _
The above is my guess as to what you want to work with; I didn't experiment with the rest of the code.
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

Excel not even open - "cannot complete this task with available resources" and then VBA run-time error randomly appear!

Has anyone else seen the "Excel cannot complete this task with available resources" error message appear when Excel isn't even open? It keeps happening to me, and it's the strangest thing.
It seems like interacting with Excel files sometimes prompts it - for example, I just turned on my computer this morning, checked my email, and then opened Google Chrome to upload some Excel files. Excel hasn't been opened at any point since the machine
booted up, but this Excel error popped up while I was uploading the files.
Checked the Task Manager because I was baffled (not that this is the first time it's happened), and there's no Excel application running, just that silly error message. Choose OK on that error and a VBA run-time error message appears (not even sure if it's
Excel VBA or Word/Outlook but I assume it's Excel - it's the good old 1004, application-defined or object-defined error).
Debug is greyed out, so it won't let me debug to see what the problem is. Choosing End brings the "Excel cannot complete this task with available resources" message back for one final performance.
This happens on a not-infrequent basis: Excel isn't open, and I randomly get this set of Excel errors: 1) "cannot complete task", 2) VBA run-time, 3) "cannot complete task" again. Then it's done, until the next time it happens. Weird.
I have 32-bit Windows 7 and Excel 2013/2010/2007/2003/2002 (I know!) but the issue only started after installing 2013. I also get the "cannot complete this task" message regularly when working in Excel (generally with Power Pivot or something legitimately
memory-hungry though), and restarting the application does the trick. I don't mind a heads-up when I'm gobbling up too many resources, but when Excel's not even open, it's a bit ridiculous. It's like I have a zombie Excel! Does interacting with Excel files
via upload/moving around Windows Explorer actually trigger some sort of Excel action in the background?
Any ideas would be most appreciated!! Thank you :)

Hi,
As the memory error messages , it can be very generic and don't always identify the real cause of the issue. We may try to use the KB that Mr. KR mentioned above to troubleshoot it.
On the other hand, if the file is xls format, we may convert to the new file format .XLSM and test.
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Excel/Q_28339883.html
Next, try to disable hardware graphics acceleration from File > Options > Advanced > Display section and disable Aero Themes (if you enabled) to check the results.
For the hangs and crashes issues, we may use ADPlus.vbs to troubleshoot:
http://support.microsoft.com/kb/286350/en-us
http://www.networksteve.com/exchange/topic.php/Excel_cannot_complete_this_task_with_available_resources_error,/?TopicId=39411&Posts=1
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it's helpful.
George Zhao
TechNet Community Support

Getting run time error in organizer Photoshop Elements 5.0??

How do I fix run time error for Adobe PhotoShop Elements
5.0 when I pull up organizer?

What operating system?

Run time error

Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors         ASSERTION_FAILED
Date and Time          13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
    involving the ASSERT statement that should not occur. A runtime error
    occurred, either because there was no activation ID entered or because
    the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
    of the first 8 fields is as follows:
    " (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
    "/SAPAPO/TIMESTAMP_DIFFERENCE"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
    Network address.......... "172.16.10.47"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "0002BFAAD700"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 0
    Short dump setting....... "full"
Database server.......... "scmprd"
    Database type............ "ORACLE"
    Database name............ "SCP"
    Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
    Created on............... "Jan 18 2006 20:47:39"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
Patch level.............. "109"
    Patch text............... " "
Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
SAP database version..... "640"
    Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
    Roll..................... 16192
    EM....................... 196923232
    Heap..................... 0
    Page..................... 98304
    MM Used.................. 186636840
    MM Free.................. 1895288
    SAP Release.............. "640"
User and Transaction
Client.............. 950
    User................ "SCMATP"
    Language key........ "E"
    Transaction......... "/SAPAPO/CCR "
    Program............. "/SAPAPO/SAPLTIMESTAMP"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
     "/SAPAPO/TIMESTAMP_DIFFERENCE".
    The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
     program "/SAPAPO/LTIMESTAMPU08"
    of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
     610).
Source Code Extract
Line SourceCde
31     lv_time_int_low      TYPE i,
   32     lv_timediff_int      TYPE i,
   33     lv_datediff_int      TYPE i,
   34     lv_time              TYPE t,
   35     ls_time              TYPE tstr_timestr.
   36
37 * check timestamp parameter
   38 * ASSERT NOT iv_timestamp_high IS INITIAL.
   39 * ASSERT NOT iv_timestamp_low IS INITIAL.
   40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
   41   IF iv_timestamp_high IS INITIAL
   42   OR iv_timestamp_low IS INITIAL.
   43     RAISE invalid_parameter.
   44   ENDIF.
45   IF iv_timestamp_high < iv_timestamp_low.
   46     RAISE invalid_parameter.
   47   ENDIF.
48
49 * prepare timestamps
   50 * .. split into date and time integers
   51   ls_timestamp_high = iv_timestamp_high.
   52   lv_date_int_high = ls_timestamp_high-date.
   53   lv_time_int_high = ls_timestamp_high-time.
   54   ls_timestamp_low = iv_timestamp_low.
   55   lv_date_int_low   = ls_timestamp_low-date.
   56   lv_time_int_low   = ls_timestamp_low-time.
   57
58 * .. calc date diff
   59 * .. check against max. allowed integer difference
   60   lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>>   ASSERT lv_datediff_int <= lc_datediff_intmax.
   62
63 * calc time diff
64   lv_timediff_int = lv_time_int_high - lv_time_int_low.
   65   IF lv_timediff_int < 0.
   66     ADD 86400 TO lv_timediff_int.
   67     SUBTRACT 1 FROM lv_datediff_int.
   68   ENDIF.
69
70 * calc total duration
   71   lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
   72   lv_time = lv_timediff_int.
   73   ls_time = lv_time.
   74   ls_duration-hours   = lv_duration_int DIV 3600.
   75   ls_duration-minutes = ls_time-minute.
   76   ls_duration-seconds = ls_time-second.
   77
78   ev_duration_packed = ls_duration.
   79   ev_duration_integer = lv_duration_int.
   80 ENDFUNCTION.
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
5 FUNCTION     /SAPAPO/SAPLTIMESTAMP               /SAPAPO/LTIMESTAMPU08                  61
      /SAPAPO/TIMESTAMP_DIFFERENCE
    4 FORM         /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3F17                349
      COMPARE_ORDER_HEADER
    3 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U03                125
      /SAPAPO/CIF_DELTA3_COMP_ORDER
    2 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U01                871
      /SAPAPO/CIF_DELTA3_COMP
    1 EVENT        /SAPAPO/CIF_DELTAREPORT3            /SAPAPO/CIF_DELTAREPORT3              189
      START-OF-SELECTION
Chosen variables
Name
Val.
No.       5 Ty.          FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254545444554452222222222222222222
    F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
    0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
    0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254545444554452222222222222222222
    F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No.       4 Ty.          FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254544445444543222222222222222222
    F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
    X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
    0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
    0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3E

Dear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen.

Interface Mapping run time error...java.lang.nullpointerException thrown

Hi,
I am trying to create a simple f2f scenairo and when I tested the configuration xi throws this message as :
Interface Mapping run time error...java.lang.nullpointerException thrown during application mapping.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:TimeSent>2007-01-09T03:43:49Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>CAMEL_BS_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>Camel_BService_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Target01_MI</SAP:Interface>
- <SAP:Mapping notRequired="M">
<SAP:ObjectId>j5qiPBwVPU2yonkPwhdt/g==</SAP:ObjectId>
<SAP:SWCV>tR26oJ7nEdu5oM/vCXwv+g==</SAP:SWCV>
<SAP:SP>-1</SAP:SP>
</SAP:Mapping>
</SAP:Receiver>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_Equipment_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Equipment_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-01-09T03:43:49Z" wasRead="false">
<SAP:Engine type="AE">af.pi7.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2007-01-09T03:43:50Z" wasRead="false">
<SAP:Engine type="IS">is.03.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20070108</SAP:Date>
<SAP:Time>224350</SAP:Time>
<SAP:Host>gbdci550</SAP:Host>
<SAP:SystemId>PI7</SAP:SystemId>
<SAP:SystemNr>03</SAP:SystemNr>
<SAP:OS>AIX</SAP:OS>
<SAP:DB>DB6</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>014</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PIAFUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>002</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
<SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService>
<SAP:QIdInternal>XBTOW0__0001</SAP:QIdInternal>
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">097C2FFA403445A30F7600CE</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>168</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2608</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>168</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
<SAP:InterfaceAction>DEL</SAP:InterfaceAction>
<SAP:RandomNumber>67</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>49574D50A74F3F5D902E20831759594C</SAP:Sender_Agreement_GUID>
<SAP:Serialize_Children>X</SAP:Serialize_Children>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.025474</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.064329</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.067038</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.085552</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.085573</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.472198</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.473649</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.483159</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.483341</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.48668</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.486921</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.49182</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.491835</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.720028</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.721545</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 9E0AD3009F9311DB8770000D60514DD2</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOW0__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- 
<Trace level="1" type="T">Interface Mapping http://kia.com/fiel2file Equipment_IM_Outbound</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_Equipment_MM_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
- <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MainDocument</SAP:Name>
<SAP:Description />
<SAP:Type>Application</SAP:Type>
</SAP:Payload>
</SAP:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Please I request to give me some hint how to troubleshoot this issue.
Thanks a lot,
Srujan

Hi, i have the same type of error when testing configuration, but it seems that the mapping even doesn't start :
i'm creating an EBP to XCBL scenario, so it's a RFC->XI->XCBL 3.5
Here is the Java exception
Mappage d'interface
Can someone be helpful for that ?
Regards
Laurent
Message was edited by:
Laurent Gitton

Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query

I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
Run-Time error '-2147417848 (80010108)
Automation error
The object invoked has disconnected from its clients.
CR exits after this error message.
I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
Anyone ever had this?
Thank you,
R.

Is this still an issue?

Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra

Xml Publisher run time error '5148'

Dear
I am using XML publisher to convert data in excel from the oracle,so first i have generated data in xml by report builder and open xml file in Word document through >template builder >data > load xml data,it's find but i use insert menu and select all field then it give message which i have mentioned below,
run time error '5148'
The number must be between 1 to 63
I think, is it column limitation because i have done this activity later but right now i have added more column so may be that's why it is showing the error but my client need to show data in excel,so how i can fulfill this requirement,is there any other solution ?
Please help on this regard. thanks in advance.

Just for future poor souls who may be pulling their hair out over the same issue, I eventually got to the bottom of this cryptic error message.
Do not try to import all your fields at once if your group has over 63 of them, as it will fail.
If you use the Insert Table option, and try to put all the fields in at once, it will give you a more meaningful message, and the one it SHOULD have given you in the first place, which is "A table cannot contain more than 63 columns".
So - Import them, a few at a time. Then move them all into one group and you're good to go.

Unable to open attachments in my aol email account, i get a run time error. I am able to open them in ie. Also unable to open up a downloaded doc in word.

Since updating to firefox 15. whatever and now 16.0.1, i have been unable to open up any email attachments in my aol email account. I am able to view them via internet explorer. Initially the attachment will open (i can see it) but then a message of "run time error" comes up and when I close that window, the document goes blank. Also, today I clicked on a link via an aol news story and the same thing happened. It went to my firefox downloads, I was able to see part of the document and then that window with "run time error" message in it popped up. Help!!!!

This is a tip I got from ehow.com:
"While less common in Firefox, runtime errors can still occur on that browser. To prevent it from happening again, merely uninstall and reinstall Firefox on your computer."

VB Run time error '1004' in SEM BPS layout

Similar Messages

Maybe you are looking for