VB041AA#ABA 90w docking station does not charge my laptop
VB041AA#ABA 90w docking station does not charge my laptop when it is docked. Is it supposed to? Should I look into a higher wattage power cord?
vvictory wrote:
That did not work... Anything else I should try?
Try a hard reset with the notebook.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.
Similar Messages
-
Z2 on docking station does not charge/alternates
on the sony docking station as well as third party magnetic chargers the phone shows charging symbol flashing on and off.
it does not change after hours and discharges when connected over night.
anyone has same issues or knows a remedy?
yt
janSee if the same occurs in safe mode:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
HP8570W with HP230W enhanced docking station does not recognize DMI connections
Hi,
I have an HP 8570W workstation with the HP230W enhanced docking station. I have three monitors plugged in - one VGA, and two DMI. Everything has been working for about a year. Suddenly today the desktop started jumping around and then the DMI monitors went dark. I checked in resolution and they do not show up anymore. I rebooted. I took laptop off docking station and retarted and plugged back in. I unplugged and replugged the DMI cable. Nothing helped.
Any idea what to try next?
Thanks,
SamBilbreyHi SamBilbrey,
Your Elitebook 8570w is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
G61-420CA win7 home premium 3Gb Ram Battery does not charge while laptop is powered on with adapter
Model………Hp G61-420CA
System board ….. 363F 42.15
Bios ….. F.15
Serial # …….. {Removed for privacy}
PN # ……..WA965UA#ABC
Win 7 Home Premium 64bit
3 Gb’s Ram
Symptoms:
Will not power on with the power adapter
Will not charge battery while laptop running
What I have done so far:
Replaced Battery with correct new battery ……….. No change in symptoms.
Replaced power adapter with new…………. No change in symptoms
Reseated the Ram, altered position of both 1 gb and 2 gb memory module. …. No change in symptoms
Dismantled laptop, down to motherboard to check for loose ribbon cables.
Reseated lan and wireless lan cards.
Reseated processor
Reseated Hdd
Replaced RTC battery
Reassembled and no change in symptoms.
Checked setup in bios OK
Reflashed Bios with F.15 update (this during one occasion where the laptop remained on with battery and power adapter for nine minutes)
All with no change to symptoms. And the symptoms still exist.
All that I am left with is that it is due to a faulty motherboard after two years.
Have I missed something, is there more I could be looking at
Thanks everyone I begining to feel like I know nothing about laptops or HP
This question was solved.
View Solution.Take a look at this and see if it helps:
http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/Battery-is-Not-Charging/td-p/496787
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster. -
Having updated my iPod 3rd Generation to iOS 5.0.1 my Philips docking speaker is unable to charge or play my music. It recognizes it for a second then unrecognizes it, then recognizes it, then unrecognizes it. It is like it is having a hissy fit everytime I plug my iPod into it. My iPod beeps when I initially connect it to the speaker but then it disconnects itself after about 2 seconds. This has only started happening since updating to iOS 5.0.1 last night. Please help!!!!!
Have you tried the standard fixes:
- Reset. Nothng will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restoring from backup
- Restoring to factory defaults/new iPod
Have you also contaced Philips? -
Docking station only maintains charge on T60
Hello all. Just a quick question if anyone can help. I have a T60 which when attached to the docking station does not charge the battery, it only maintains the current battery state (i.e. it does not discharge but maintains the current "percentage" charge). I recently changed the HD and am now running XP SP3 (used to be SP2) - but I doubt that has anuthing to do with it. Other than that everthing else is fine. Any pointers would be much appreciated.
Thanks in advance, d.Hello @rnorton17
Thank you for posting on the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since the Elitebook 2560p is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP EliteBook 2560p Notebook PC
I hope this helps!
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?
Clean any debris from the adapter, docking station connector and the connector on the Nano.
-
I just received the 3rd generation and my wall charger does not charge. If I use my Sony docking station it does. I can't carry my docking station! Please help!!
Did you get a charger with the iPad 3?
Could be the charger or cable. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I have installed Illustrator CCloud and uninstalled, and reinstalled, it just bounces on the dock and does not open (do I need to Uninstall CS5) Thanx
-
Airport base station does NOT deliver a solid connection!
I have an older Airport base station (an extreme-square, flat, white, you know the one). Ever since I installed the most recent firmware update I get next to no data flow through from the provider. If I connect direct to the provider router via ethernet cable I get amazing connectivity speeds. I change the set up to connect via the Airport and I get either no connection or 5 KBS.... a speed, when it available is a joke. While trying to run through the Airport my Airport signal is full strength. It appears the base station does not know how to digest and dispense the information from the service provider into a full band of connectivity. The problem exists with both Apple laptops in the house. I have done all the required resets and restarts and to no avail. Connecting direct, which is a HUGE hassle, provides amazing speeds. I had none of these issues before I did the firmware update about three days ago (about 12.18.09). Any thoughts or directions to help me out?
Thanks!Your Express requires an IP address to be issued by the device connected to its WAN port, in most cases that is a cable modem.
Power down your modem and let it rest. Leave it powered down, connect it to your AirPort Express, then power it back up again. This permits the modem to supply the Express the IP address it needs.
Like it says, if you still can’t connect, contact your Internet service provider. -
Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?
It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)
-
Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier. Is there a fix?
I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp. The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express. It would be nice to play Airtunes while simultaneously accessing the Internet. I don't understand your question about what program I am using for which I require AirPlay. I am not learned about computers in general, and even less so about Macs than PCs. I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier. I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo. I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.
-
I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?
I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate. -
Sony docking station speaker not working with iPod touch
We bought a Sony docking station for the iPod touch (4th generation) we got our son for his birthday. The speaker on the docking station works when playing the radio, but not the iPod touch. We returned the docking station for another, and we are having the same problem. Which is why I am pretty sure the problem is the iPod touch and not the docking station. The docking station actually will charge the iPod, just not project sound out of the speaker with the iPod. It will, however, project sound out of the speaker when using the radio.
Is there anything simple I could be missing in settings? I can't figure this out. TIA!
Nick's momUse the communities search box in the upper right and search for
sony.
The go to advanced search and limit search to the the iPod touch forum.
Recently there has been several users posted here with the same problem with a Sony dock. I do not recall if it was solved. -
Application bounces in dock but does not launch
When I double-click on a FileMaker file, it used to automatically launch FileMaker Pro 8 Advanced until about a week ago. Now, when I double-click on a FileMaker file, the applcation icon bounces for a fraction of a second in the Dock but does not launch.
If I drag the file to the application, then FileMaker launches.
Other applications are not exhibiting this odd behavior.
How can I fixt it?
G5 Tower Mac OS X (10.4.2)remove (drag out) the filemaker icon from the dock, open finder and locate the filemaker application and drag it back to dock.
If this does not help, the console messages mentioned before might help us more.
Maybe you are looking for
-
I created an oracle report to generate (Oracle reports 10g) PDF output and called it from APEX through rwservlet and I am getting the output without any issues but if I repeat the same process for CSV output i am getting unwanted output. it not resem
-
Please let me know to construct a custom table as per below requiremnt
Dear Friends can any one please let me know hot to create a custom table as below | outpatient | |employeeno | class | startdate | enddate | spouse |1stchild | 2nchild| Rate | amount| My FO wants to enter in the SM30 as above ......i.e he wants to ha
-
Computer to Computer Networking Crawls
Hi All, I have a very annoying problem. Sharing files between my iMac and Macbook take forever. 16 Minutes for a 250 MD folder. I end up having to use a flash drive just to share files back and forth. Both these computers are within 5 feet of eachoth
-
Pass batch number from ECC system to GTS
Hi Experts, I want to pass material batch number(MSEG-CHARG) to GTS system while creating the material document(GR) in ECC system. This batch number should be displayed in item level at custom declaration screen and should be stored at table /SAPSLL/
-
SDM Host not defined or not found
Hello all, I have recently installed the SAP Netweaver CE 7.1 SR5 and also the corresponding NWDS. I have couple of question on the same. 1. i did not do any POST INSTALLATION CONFIGURATIONS. - can you please help me in that, usually like SLD and oth