VBA "error" in EPM for BPC 10.1 - "Cannot exit design mode" - any ideas?

Hi all,
Upon opening specific BPC reports in EPM, I am presented with the following error message:
I have tried the following:
Debugging the code using the following stop:
Function
AFTER_WORKBOOK_OPEN() stop
doRefreshFormula End Function
FPMXL API's turned ON:
Removing the code, pasting it in bit by bit ( the error still appears)
Unfortunately none of the above worked. HOwever, repasting the reports into a new workbook - they worked - however, now they are starting to show the error again!
---> Does anyone have any other ideas/if you have seen it before - please help!
Cheers!

Hi,
Can explain the structure of report which functions are used to build report? which API's are used?
VBA code.
This issue might due any corrupted function or VBA code responsible for corruption.
Please share VBA code. and other details.

Similar Messages

Hi ERROR U41M1C212 for Update Elements 9 and PS CS5. Any Idea what it is? Thanks for Help.

hi ERROR U41M1C212 for Update Elements 9 and PS CS5. Any Idea what it is? Thanks for Help.

If you look at the bottom/right of this screen you have a list of links in 'More information like this'.
Have a look at them.

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I've swapped to i5c so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..

I've swapped to i5c (great phone) so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

I have this problem, There was an error in the App Store. Please try again later. (null) Any idea how to fix this?

I have this problem with the APP store. There was an error in the App Store. Please try again later. (null) Any idea as to how to fix this?

Does this happen when you try to update?
These guys have a cool solution that has helped with that error when you can't update an app: http://support.iawriter.com/help/kb/mac-questions/the-app-store-fails-with-there -was-an-error-in-the-app-store-please-try-again-later-null
NOTE: the instructions are specifically for their app but the solution has also worked for other apps too. They are, however, more advanced steps so proceed with caution.

Adobe Acrobat Standard 9.5 Install Error: "Error applying transforms please ensure specified transform paths are valid". Any ideas on how to fix this?

I had Acrobat Standard 9.5 on a laptop that broke. Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”. Any ideas on how to fix this?

Rahul,
No error numbers other than the message I mentioned previously.
I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
When I unzip the Acrobat file this is what is in the setup ini file:
[Startup]
RequireOS=Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
[Product]
msi=AcroStan.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroStan.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
Thoughts?
Thanks again,
Tom

Hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?

hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?

Ah!
Factuur Bright x
part of errors:
Process:         Factuur Bright X [1476]
Path:            /Applications/Factuur Bright X/Factuur Bright X.app/Contents/MacOS/Factuur Bright X
Identifier:      ???
Version:         ??? (2.0.0b20)
Code Type:       X86 (Native)
Parent Process: launchd [184]
User ID:         501
Date/Time:       2013-07-10 22:35:39.180 +0200
OS Version:      Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report:          2118 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 24 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      47D641A2-4625-7590-369C-8BAFE1439551
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000010

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

OKay, here is the deal. You cannot change the location of encrypted files nor can you share them with other machines. There is no file server for iTunes so even if you export the movie index from iTunes to an external volume, each time you reboot your computer itunes has to reindex the external drive every time you want to access the files. The second you run your mobile computer without the external drive or try to access the HD movies from another device or another user on the same network, the indexing gets out of synch. The entire process is self defeating regardless. The HD movies are encapsulized by apple to stream to your devices via iCloud and NOT via Cloud. Only your TV can play 1080p. That single file you download from iTunes has mutiple versions of the same video in the capsul, one version for each type of apple device. There are no 1080p apple devices except for the Apple TV. When you buy a movie you are buying a license and not the movie. It's going to get worse with all the new copywrite laws. Already you cant share any apple devices with other itunes accounts. Your airport express just stopped streaming music to all users on the local home sharing Cloud. Only the one user for each device and soon only airplay speakers connected directly to the device. No more passthru via your TV and no more file sharing with other accounts on the same wi-fi. All the ISPs are doing the same thing. And soon everybody will be buying their phones and TV's and iPads from the cabble guy.
Apple has done a poor job of educating the consumer as to the difference between the Cloud and iCloud. They are not the same at all.
Message was edited by: ronfromwoodland hills

I have upgraded to an Iphone 6 and am at IOS 8.2. My calendar alerts no longer show up as notifications on my phone. I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?

I have upgraded to an Iphone 6 and am at IOS 8.2. My calendar alerts no longer show up as notifications on my phone. I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?

I have iPhone 4s but the same problem with calendar on 8.2 iOS - no sound, no notification appears - but everything is switched on.

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

I get Network error when I sign in to register my CS5 illustrator. Any ideas how to fix it?

My Adobe ID works fine when I sign in on the Adobe website but when installing my CS5 Illustrator I get network error when I sign in to register my serial number. Any ideas how to fix this?

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

First question - I have Acrobat 9 on my desktop and the license seems to have been messed up. I tried to download and fis but I asked me for a disk. I don't have any idea where the "disk" is. Can I get the license update without that disk?

First question - I have Acrobat 9 on my desktop and the license seems to have been messed up. I tried to download and fis but I asked me for a disk. I don't have any idea where the "disk" is. Can I get the license update without that disk?
Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?

If you still have your serial number for Acrobat Pro there is a link to the installer here: Download Acrobat products | 9, 8

Hi, I need to take my daughter off from our Apple account and set up her own. So, delete her from one account and create her own. Realize I sound imbecilic for not knowing how to do this. Any ideas? Thank you so much. Jules

Hi, I need to take my daughter off from our Apple account and set up her own. So, delete her from one account and create her own. Realize I sound imbecilic for not knowing how to do this. Any ideas? Thank you so much. Jules

You don't have to take her off your account exactly: she needs to sign out from your account on her computers and devices. Then she can obtain an Apple ID at http://appleid.apple.com and use it to sign into System Preferences or Settings>iCloud.
However, there are some issue about this. If she has been syncing her calendars and contacts to your account then the data will disappear from her devices, but remain on your account. Individual calendars can be exported as .ics files and reimported into her account, but if she has her contacts mixed up with yours she will have to enter them individually in the new account (or export yours, import them into hers, and delete the ones she doesn't want.
More intractable is the email issue. She cannot move an address from your account to hers, so if she has been using a alias on your account to have her own address she cannot transfer it. She will have to create a new email address.

Keep getting this error message on my calendar "HTTP error 404. Make sure the URL is correct.". Any idea how to fix it?

Keep getting this error message on my calendar "HTTP error 404. Make sure the URL is correct.". Any idea how to fix it?

I started getting this at the same time. Must be something on their end. It's all still working though which is weird.

OS X Lion: Fix for wireless not reconnecting when exiting sleep mode

http://www.tech-recipes.com/rx/18931/os-x-lion-fix-for-wireless-not-reconnecting -when-exiting-sleep-mode/

I have the same symptoms with a 2011 iMac and my Senheiser Bluetooth headphones.
10.7.3 did not correct this bug.
I'm also using MS Messenger and notification sounds are also buffered until the headphones are switched on.
I found other threads dealing with this bug :
https://discussions.apple.com/message/5962104#5962104
https://discussions.apple.com/message/12837199#12837199
http://apple.stackexchange.com/questions/26991/os-x-lion-mail-app-sound-effects- bug
https://discussions.apple.com/message/15856803#15856803
I'm currently trying the tip given in the last discussion :
"Success - in the Audio Midi Setup (Applications/Utilities) I changed the output to 2ch - 32bit Float and all the audio works well."
My headphones already had this setting, but internal speakers had 2ch - 24bit... is it a possible explanation ? Time will tell ...

VBA "error" in EPM for BPC 10.1 - "Cannot exit design mode" - any ideas?

Similar Messages

Maybe you are looking for