VBEH is not what I thought it was?

Hi!
I have a question concerning the VBEH en VBEP tables. My ultimate goal is to be able to measure the delivercapability of sales orders. Therefor I want to measure the gap between a customer requested delivery date, and the confirmed delivery date.
For the confirmed delivery date I use the EDATU field in the VBEP table. This is the scheduled date. The problem is that with every re-scheduling, the original EDATU is updated. I would like to be able to measure the first confirmed (scheduled) date.
I thought I was lucky because of the presents of the VBEH table. Which is documented as the history tables of VBEP. To my surprise the table was empty, at least it was not filled with the expected data. There were no references to sales orders (and there should be).
Did I misinterpret the functionality of VBEH? Or is there some way that I can get this tables filled with the required data? Is there another way to get the history of the VBEP table?
With kind regards,
Nanne Sluis

Hi Nanne!
Sounds like VBEH was sent into retirement. But table VBEP is part of change document object VERKBELEG, field EDATU is marked as change doc relevant -> you should get for each date change an entry in a change document.
Analysis the change documents to get the history of the scheduling dates. Especially the first entry for the field EDATU should contain in the field VALUE_OLD (of CDPOS) the original value, otherwise you can take the VBEP entry itself.
Regards,
Christian

Similar Messages

Can I please cancel this subscription. I just ordered it, less than 10 minutes ago. It is not what I thought it was.

About 15 mintues ago I subscribed to this Adobe Export Convert. I would like to cancel it; it is not what I thought it was. Also, is there any phone number to talk to a person. I also did not get a receipt for my purchase.

You will need to contact Adobe's customer support for the service (which isn't here).
Try:
Contact Customer Care
Be well...

An App I downloaded for my iPad was not what I thought it was going to be, can I remover the App and request a refund?

An App I downloaded for my iPad was not what I thought it was going to be, can I remover the App and request a refund?

You probably cannot get a refund, since as RG said the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you, something more likely if the app does not perform as advertised.
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I 'fried' my AC adaptor for old faithful Zire 72 when I plugged it into an outlet in Indonesia that was not what I thought it was!

Where might I get a new AC Adaptor?
Does Palm carry them or is there another website that does?
Thanks in advance for your help!
Post relates to: Zire 72

If you have a Radio Shack nearby, they have the iGo system. It's a modular charging system that adapts to practically any device in their system.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?

I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?
jacknil

I found an answer to this on another page (I was having the same problem) This worked for me:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
more here: https://discussions.apple.com/thread/5596831

Hello my name is Omar Andres Santacruz, finished iMedicalOffice buy a program you have in the app store but what he said on the page is not what I expected, I was very disappointed that, frustrated and reweighed when I check my account had gained 139.99 f

Hello my name is Omar Andres Santacruz, finished iMedicalOffice buy a program you have in the app store but what he said on the page is not what I expected, I was verydisappointed that, frustrated and reweighed when I check my account had gained139.99 for 7 times, I do not understand what has happened that is not the first time I buy something ustedeses thank you very much for your help

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

How do you return a song that isn't what you thought it was?

Hey,
I just bought a song that I listened to a snippet of, but when I bought the whole song, it wasn't what I thought it was. Can this be exchanged/returned?
Thanks
Kcat
iMacG5 Mac OS X (10.4.7)

in that same vein, what if iTunes was having a fit over your credit card, and after you update the information, it downloads a game 5 times!!?? Is there anyway to dispute this and return the 3 uses you have left?

My project file in not where I thought it was. How can I find it?

I have been searching through my old Premier Pro 5.5 projects and archiving several to a different drive to make room on my projects drive. I closed down Premier Pro and then re opened later to continue editing a current job, but my project was missing from the opening Premier pro splash window of recent projects. Only the old ones that I had been looking through to archive. No problem I thought and navigated to the folder where I thought it was but it's not there and I have not being able to find it by searching find file, would it be in a default PP folder somewhere? Thanks Howie

Thanks Arjun,
That’s what I thought as well, but when I checked it was not there, so I decided to go through every project folder in my hard drive and check the contents and sure enough I found it in another project folder. I was in a bit of a panic as the commercial I was working on is on air on Monday. Do you know if I move it back into its proper project folder will Premier Pro be able to find it, or should I just leave it where it is and not worry about it.
Thanks for your reply
Regards
H

I was experimenting setting up parental controls on my macbook pro and selected to set up my current account with controls. Apparently my admin name and password are not what i thought, because now I cannot unlock them.

I thought my admin user name and password were the same I sign on with, apparently not because now I am locked out of my own computer. I took two hours to reload mavericks from ap store, because i was told it would give me the option of changing the password. It did not. Sooooo, that's where I am. Thanks for any help.

Hi wlahey,
If you are having issues using your admin user name and password on your MacBook Pro, you may find the following article helpful:
OS X Mavericks: If your administrator password was not accepted
http://support.apple.com/kb/PH14014
Regards,
- Brenden

Can I get refund for item purchased from App store that was not what I thought?

I wanted to purchase iDVD but instead purchased an instructional video.

HI..
Sorry, but Apple's policy states that, "all sales are final" > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
Just in case you are running v10.7 Lion, Lion does not support iDVD.
See Old Toad's post here > Is iDVD Dead?: Apple Support Communities

My HDD is not what I thought it is

It turns out that my hard drive is not a PATA drive as I thought, but in fact a SATA drive.
So... How did this thing function using PATA drivers? Let alone work at all (though badly!) with legacy IDE drivers? And, seeing as the kernels of distros like Slackware and Draco Linux have failed to properly recognize my SATA device - how do I keep a full kernel from trying to run my SATA controller with IDE drivers?

lspci wrote:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
I checked the hard drive, and it is definitely SATA. However, if I use a kernel that has legacy IDE drivers compiled in, the kernel tries to use the IDE drivers instead of the libATA ones, as if I had a PATA controller. Using the IDE drivers with the SATA controller works, but the performance is miserable; so I'm wondering how - for distributions other than Arch which have IDE drivers compiled into the kernel - to prevent the IDE drivers from being used, and use the libATA drivers instead.

Framset not what I thought

So when I think of frames, I think of a page split up to help guide where
content is. Not the case if I try and use one of the frameset templates
provided with DW CS3. So what are these and how do you use them? Are they
truly frames in the traditional sense but I am just not using them
correctly? I first noticed this upon saving a test document and it wanted to
save it multiple times as if I have multiple pages or whatever. I guess
though with frames, in essence, that is what you have. I guess the approach
just threw me off. Can anyone put some clarity on this please? Thanks much.

All I see from my OE is this toolkit forum or things that have developer in it. I do not see one as you have labeled. When I type in dreamweaver, that is what I get. Any ideas? <Gü[email protected]> wrote in message news:[email protected].. > Hi, > > I suggest posting this question in the "Dreamweaver General Discussion" > forums, as it´s not related to the Dreamweaver Developer Toolbox (ADDT) > product. > > Günter Schenk > Adobe Community Expert, Dreamweaver

FCX 2 sync problem....not what I thought.

Folks...for whatever reason, when I try to import clips from my Sony minidv camera, I'm getting dropped frame warnings and a loss of audio sync. I'm using FCX 2.0.3 and Quicktime 7.1.6. I seem to remember (somewhere) that using the wrong version of Quicktime can cause this to happen. This is an IMac G5 with 768mb, running OSX 10.4.9, FCX 2.0.3 and Quicktime 7.1.6.
Taking the same camera to another machine, a G4 running FCP 5, I don't have the sync problems, but I did get a warning that my audio was not recorded at the same rate as that at which I was trying to capture. I changed the bitrate from 12 bit to 16 bit on the camera and that took care of the warning on the FCP box, but didn't do anything for my problem on my FCX 2 station.
A few other details...this is the first time I've used FCX since my system board and hard drive on the IMac G5 were replaced. Also at that time we went to OSX 10.4.9 from 10.3.X. Could this be any part of the problem?
many thanks....from a relative rookie.
Mike Nassour

As Michel told you - ALL versions of FCE before FCE 3.5 can be affected when using OSX 10.4.9.
The problem of dropped frames can be caused by a conflict between Spotlight and 10.4.9.
If you don't want to update the OS you can try this simple workaround :-
1. Open System Preferences and select Spotlight.
2. Select the Privacy Folder.
3. Drag FCE's Capture Scratch folder into it. That's it !
Don't worry about "moving" your Capture Scratch folder - you haven't really done anything to it except tell Spotlight to ignore it.
With luck you should be able to capture without dropped frames.
Ian.

I want to cancel my order I made today. It is not what I thought. How can I do that?

How can I cancel my order??

Hi pattonlucy,
I just looked at your account, and saw that the order is still processing. As such, I'm not able to process it myself. However, an Adobe Customer Care agent should be able to take care of that quickly. Here's the contact information: Contact Customer Care
Click Still Need Help? Contact Us at the bottom to find both phone and chat options.
Best,
Sara

After loading a toolbar and finding it to be not what I thought, I attempt to go to Tools Add-ons so as to "uninstall" it, but get a tab labeled "Add-ons Manager" that says "Loading..." forever -- what's up with that?

Firefox 6.0.2. Loaded something called "Productivity 3.1 Community Toolbar", version 3.7.0.6, "Toolbar powered by Conduit". Simply want to go to the Add-ons Manager and get rid of it, but don't seem to be able to reach the Add-ons Manager. Is there some other way to rid myself of this toolbar?

No one here is going to do anything about it. Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

VBEH is not what I thought it was?

Similar Messages

Maybe you are looking for