VBFA not updated using BAPI_GOODSMVT_CREATE

Hi,
I'm using the function BAPI_GOODSMVT_CREATE to do a goods receipt for the outbound delivery as the replacement for MIGO (movement 101). The movement is created in the table MSEG but it doesn't update VBFA.
There is someone another function to do this?
Thank you in advance

Outbound delivery is a goods issue, not goods receipt. Why do you need to do a receipt and how could you even do that?.. Are you sure it is not an inbound delivery?

Similar Messages

  • Document Flow not updated using BAPI_GOODSMVT_CREATE

    Hi Experts,
    I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
    Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
    Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
    Regards,
    Puja.

    Hello Puja,
    Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
    Also refer to the below OSS note.
    http://service.sap.com/sap/support/notes/199703
    Regards,
    Thanga

  • Iphoto 9.5 won't import photos from iPhoto 7.5.  Library will not update using the iPhoto library upgraded application.

    iphoto 9.5 won't import photos from iPhoto 7.5.  Library will not update using the iPhoto library upgrader application.  Repeatedly says it can't locate photos even when told to cancel.  I think the photos in question are in Nikon RAW format.

    iPhoto 9.5 immediately tries to "upgrade" my library using the upgrader.
    iPhoto 9.5 asks you to run the upgrader to prepare the library for 9.5. It then will update the library to its format.
    You need to do the following:
    1 - go to your Applications/Utilities folder and double click on the iPhoto Library Upgrader 1.1 application. 
    2 - select Choose Library, navigate to your iPhoto library, select it and let the upgrader do its thing.
    3 - launch iPhoto 9.5 to open and finish the conversion of the library.
    OT

  • BLOB column not updating using automated row processing

    I have fiddled around with creating a simple application to understand how APEX handles images stored in blobs - did a simple app that stores them, gets them, displays them. it all works great.
    so i have this existing table/application that i am trying to add a BLOB column to here's what i did:
    it's a pretty simple form on a table with report application. just one table.
    I added the BLOB to the table (and the other mimetype etc cols as well).
    i added the page items to the form page.
    i basically made everything identical in terms of page item settings and such to the working simple application.
    so here's the problem... when i run the application and update a row, the BLOB column isn't updating. neither are the mimetype or filename columns. the activity date col is.
    and here's another interesting thing. i quickly created another form and report pair on the same table, and when i ran it, it updates the blob col just fine.
    why is my original form not updating it? what can i do to remedy this? any ideas? i've gone though setting by setting for the blob page item and the one that works is identical to the one that doesn't.
    i'm using the automatic row processing to update the table.
    Edited by: moo on Jun 23, 2011 5:33 AM

    Gary,
    The DML processes (and the creation wizards for them) are for use with items having source type Database Column. If your page items don't use this source type, then neither the Automated Row Fetch nor the Automatic Row Processesing (DML) process types will work.
    Scott

  • Adobe Acrobat Pro 10.1.10 not updating - using MAC OS X, v 10.9.5. Help!

    Adobe Acrobat Pro 10.1.10 not updating. Trying to update to version 10.1.13. on MAC OS X, v 10.9.5. All my Adobe CS5.5 Design Premium products update fine.
    First tried automatic updates and go this: Update error:  An error occurred. Please check for updates again later. Error: 1514.
    Then went to Adobe.com to download update.
    Downloaded the 10.1.13 update, started installation but in final stage of installation got this message "The Installation Failed (encountered an error) Contact software manufacturer for assistance.”
    What do I do now? Thanks,

    Hey Marylou Wade,
    We would need the Acrobat installation logs in order to analyze this error. Please follow the below procedure to extract the log :
    - During the installation press Command + L.
    - Installer Log window appears. Now On the top left corner of this window, by default 'Show Errors Only' is selected in drop-down list.
    - Change it to 'Show All Logs'. Now when the installer hangs, copy log from here and send it to us.
    Regards,
    Rahul Tyagi

  • L_TO_CREATE_MULTIPLE creates multiple SUs but VBFA not updated????

    Hi Experts,
    Need you help. Scenario is:
    I have developed one ZProgram which creates TO from Inbound Delivery and must create TO with multiple SUs. I am using Function module: L_TO_CREATE_MULTIPLE. It creates TO good.
    But the VBFA table doesn't got updates for the same.
    I tried using WS_DELIVERY_UPDATE function module (RFC) but it give an erros saying "Cannot be processed with this transaction." Message Class VL Number: 143.
    Can anybody help throwing some light on this. I have ztcode for this program. Is there anyotherway to update Delivery.
    Thank you in advance.
    Regards,
    Gaurav Patwari

    Dear Diane
        I have the same problem. Can you find the solution from this problem?
    Thank you,
    Nuttapon K.

  • Grub not updating using grub-mkconfig

    I have created an entry in /etc/grub.d/40_custom. I then ran grub-mkconfig -o /boot/grub/grub.cfg. The entries are there, but when I boot, they don't show up in the menu. Am I missing a step for adding a menuentry to grub?

    nullified wrote:
    We're going to need more information if we're going to help you.
    For a start, post the 40_custom file in code tags, as the.ridikulus.rat asked. Also, you are what? Two questions were asked that this might be a response to.
    I have read the wiki. My answer was in response to your question about UEFI-GPT. I believe that I am setup using UEFI-GPT. I followed the instructions at https://wiki.archlinux.org/index.php/MacBook in order to setup dualboot. A few months ago I blew away the mac osx partition and everything works fine. I am trying to add my linux from scratch partition to my grub menu. I can get to the LFS partition fine from the grub shell, so I know my entry is fine. I think that my problem is updating grub image that's registered with the EFI boot record.
    Here is my /etc/grub/40_custom file :
    #!/bin/sh
    exec tail -n +3 $0
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    menuentry "Linux From Scratch" --class os {
    insmod ext2
    set root=(hda1,5)
    linux /vmlinuz-3.13.3-lfs-7.5 root=/dev/sda2 ro
    boot
    I am unsure how to update the image that EFI is booting. I also might be misunderstanding how EFI works

  • Shipment is not updating using SHPMNT IDoc

    Hello All,
    I am updating a Shipment with only one delivery using IDoc SHPMNT05, however  this Shipment has two deliveries earlier, As a result IDoc failed with as error message : This action no longer possible: Transport XXXXXXXXX has already been scheduled. This error is because this shipment status is set to planned.
    But I want to update the shipment with only one delivery even though it is scheduled. ideally when this IDoc is posted one delivery should be unassigned from the shipment. how can I achieve that, please help me.
    Thanks & Regards
    RK
    Edited by: RK on Jul 1, 2010 11:50 AM

    Hi Maris Sauka,
    If Shipment is already scheduled, standard SAP does not allow to add , move or delete the deliveries from it, it gives error like "This action no longer possible: Transport XXXXXXXXX has already been scheduled" , This error comes from Function module SD_SHIPMENT_FCODE_CONTROL,To overcome this there is an implicit enhancement required in form statement shipment_fcode_allowed in include program LV56EF01. within this I clear the shipment planning status i_xvttk-stdis.
    Note: Please make sure that this enhancement does not impact any other developments, so make use of export and import statements.
    Thanks
    RK

  • Nokia N95 not updating using the Nokia Software Up...

    Hi guys
    just got my n95 today, it has v10 fw on it and i would like to update it to v12.
    ive downloaded and installed latest pc suite and downloaded the latest nokia update software
    i run the updater and it says found new software (v12), please tick the box to acknowledge etc etc
    so i click on ok, and it says updating....
    then 2 mins later i get this screen:
    http://aycu30.webshots.com/image/24429/2000451008485701969_rs.jpg
    Which says "phone recovery - please remove battery and restart the phone"
    so i got to take battery out and retry, but i get the same error. not too sure what to do now? the fw it downloaded was 113mb.
    i have tried it on vista pc/laptop and a xp pro pc and still get the same error.
    ive tried using different usb ports, connected the usb directly to pc (without any hubs etc) and still get the same error.
    it looks like this n95 doesn't want to be updated. The n95 still works though, i just want to update its software
    anyone had any thing similar? is there anything else i could try?
    any help is much appreciated
    thanksMessage Edited by bigup on 27-Jul-200710:15 AM

    Handsets that allow for updating, have a small piece of software within them often called the boot loader, that allows the new upgraded software to be flashed into the device.
    If the Boot Loader is damaged, then the upgrade of the device software from the Nokia Software updater cannot be performed.
    A Nokia care point is able to rectify this because they can use the service connector on the handset to reflash the software with their equipment.
    This will be done for free if your handset is in warranty.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • Net Price not Updating Using BAPI : BAPI_CONTRACT_CREATE

    Dear Experts,
    I am facing an issue while creating CONTRACT using the bapi: BAPI_CONTRACT_CREATE. I am creating the Contract based on data from my excel sheet. And we are maintaining the INFO RECORDS for the same materials.
    In the excel sheet we are providing the NetPrice (NETPR) and creating the Contract. My issue is " instead of taking the Net Price from the excel it is taking the Net Price from Info Records". For Example, if for a Particular material the Net Price in our excel file is 125, after bapi execution, the net price is updating as 100 instead of 125 in Contract Creation( ME31k-ME33K). In the Info Records we are maintaining this net price(100) for that material.
    Thanks in Advance for your response.
    Regards,
    Prasad

    you can use BAPI_CONTRACT_CREATEFROMDATA
    * Create Contract Order Number [BAPI_CONTRACT_CREATEFROMDATA]
      CALL FUNCTION 'BAPI_CONTRACT_CREATEFROMDATA'
           EXPORTING
             contract_header_in      = header
             convert                 = 'X'
           IMPORTING
             salesdocument           = v_order
           TABLES
             return                  = t_return
             contract_items_in       = itab_item
             contract_items_inx      = itemx
             contract_partners       = t_partners
             contract_conditions_in  = t_conds
             contract_conditions_inx = t_condsx
             contract_data_in        = t_contract
             contract_text           = t_texts.

  • Custom Field is not updating using MM17 ( Mass Material Maintenance )

    Dear All,
          I have created 1 custom field in MRP1 view of MM01 tranction & that field saved into MARC table. It is working fine & I am able to change also that field using tranction code MM02. But Problem is that I want to change that custom field of material master using tranction code MM17 , which is for mass Material Maintenance. So to edit custom field of material master from MM17 what I need to do?  Please suggest...
    Regards
    Pradip Pawar

    Hi,
    Follow the below procedure,
    1. In table MARC  custom fields need to be add using append structure. For that need to create data elements & domain for      corrosponding fields.
    2.In SE51 need to copy standard program SAPLMGD1 & screen 2481( In your case screen would be different ) in to Z program.     
    3.Now in to the layout of  Z program need to add custom fieldu2019s which we defined using append structure in MARC table.
    4.Need to add Field statment for the new custom fieldu2019s into the PAI Flow logic of Z program inside CHAIN...ENDCHAIN statement.
    5.Need to run transaction OMT3B and then copy screen sequence no. 21 into our Z screen sequence say Z1.
    6.Once screen sequence is copied into screen sequence Z1. select sequence Z1 and double click on data screen folder.Select  screen sequence with description MRP1 and after selecting it double click on Folder 'Subscreen ' and change the program given for screen no 2481 with our Z program name and Save.
    Imp Note - Refer SAP Note no. 44410.
    Regards,
    Pradip Pawar

  • X6 will not update using PC suite

    Hi,
    I have tried without succes to get my X6 to update the latest sofware.  It connects OK then after a period of time is says that the connection has been lost.  Looking at the icon in the bottom left hand corner of my PC it shows that it is connected and I can use other applications of the PC suite,
    Have I the correct drivers?  Is there something else I need to do?
    The phone was new 6 weeks ago from an O2 store.
    Also when I disconnect, I have to take the battery out and switch on again before the phone will work.
    Any ideas?
    Dave - Norfolk UK

    Hi ssears,
    Try disabling any firewalls and anti-virus software you may have installed during the update and then see if that works. Dont forget to enable the firewall and anti-virus software again after the update completes or if it dosent work.
    Hopefully this will help you.
    Regards,
    Tim

  • Mac's iCal not updating using iPhone4's iCloud

    I have upgraded my iPhone4 to iOS5, but still use Snow Leopard on my mac
    When I change an event in my iPhone's calendar, why doesn't it update to my my mac's iCal?

    An update.
    If I add an event to iCal on the Ti Powerbook, it will sync to .mac then on to the 17" then to the Palm and display correctly on the Palm. It won't display in the the month, week or day view in iCal on the 17". If I go look in the search list of events, the propagated event is there.
    The same is true if I create an event on the Palm and sync it to the 17" then to .mac and on to the Ti Powerbook. The event is on all calendars, it just doesn't display on the 17".
    another update: I just subscribed to the US Holidays calander and when it came in and displayed, the missing new events also displayed.
    Any clues about how to force a refresh of the calendar view display?
    Thanks.
    x

  • IPhone 3g Apps Not Updating using iTunes?

    Ok, I usually check for updates for application using iTunes and I have updated some applications with it, however, I have noticed that there are some apps that has updates but won't be detected by iTunes. I would manually check the version I have in iTunes versus the store and when I download and do a sync, it updates it. So now my question is, uhh..what is happening?
    I obviously can't rely on the auto update within iTunes and the App Store on the iPhone doesn't detect it as well..
    Can someone shed some light with this?

    Thanks good to know. As long as it's a known issue. I guess I just have to deal with it. I know that I have seen on blogs for new application updates and I would be like ok good. But it would never ever show up in my iTune or appstore on the iPhone. So I guess I just have to keep that in mind and download manually.
    Thanks again!

  • Desktop Not Updating - Used, Available

    I have a problem. Why isn't my Desktop updating itself? I have a USB Flash drive connected to my iMac, which I've just deleted all the files off, and emptied the Trash. Yet the Desktop still says there's only 772MB free space on the Flash drive. Why is this?
    If I go to the Dashboard and check my iStat pro widget, the widget gets it right. The widget knows that the Flash drive is empty, but Apple's official Desktop doesn't. Makes no sense to me.

    Hi Reuben, this is a known issue in Finder. No fix but a decent workaround here.
    -mj
    [email protected]

Maybe you are looking for