VBox Guest Additions Kernel Modules
Hey, semi-literate Linux user/Arch n00b here. I apologize in advance as I realize that this issue has been addressed in this forum previously, but after several hours of hunting, I have yet to find a proper solution. I am trying to run Arch64 as a guest in VirtualBox (host is Ubuntu 10.10, x86-64 if it matters). I have the system up and running, but I can't seem to get the Guest Additions going, as the system won't build the kernel modules. This is the terminal output while running the installer:
Uncompressing VirtualBox 3.2.6 Guest Additions for Linux........
VirtualBox Guest Additions installer
Removing installed version 3.2.6 of VirtualBox Guest Additions...
:: Building the VirtualBox Guest Additions kernel modules [FAIL]
Your system does not seem to be set up to build kernel modules.
Look at /var/log/vboxadd-install.log to find out what went wrong. Once you have corrected it, you can
run
/etc/init.d/vboxadd setup
to build them.
:: Doing non-kernel setup of the Guest Additions [DONE]
:: Installing the Window System drivers [BUSY]
:: Installing X.Org Server 1.8 modules [DONE]
:: Setting up the Window System to use the Guest Additions [DONE]
You may need to restart the hal service and the Window System (or just restart
the guest system) to enable the Guest Additions.
:: Installing graphics libraries and desktop services components [DONE]
And this is the output of the log file:
Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop.
Creating user for the Guest Additions.
Creating udev rule for the Guest Additions kernel module.
Any help would be greatly appreciated.
Guest additions for VirtualBox 4.0.4 are broken, in several ways. Try a newer build for them:
http://www.virtualbox.org/download/test … r70281.iso
It's working OK for me, while with the regular 4.0.4 additions I had numerous crashes on my XP guest.
Similar Messages
-
Yum config, kernel-header, and VBox guest additions
It appears that I've entered the Twilight Zone in dealing with kernel-header issues and installing OL 5.7 under VBox.
After using VMWorkstation quite happily for a few years, I've decided to give VBox a try. First I struggled with the differences in the way the two products handled networking (host-only and NAT), now I am struggling with getting VBox Guest Additions installed.
The first thing I do after initial OS installation is configure for the public yum server. Next I try to install the Guest Additions - mostly so I can share a directory with the host OS (Win 7) and pull in a bunch of standard scripts, Oracle DB install media, etc. Running the Guest Addition install - VBoxLinuxAdditions.run - complains about packgages, so I get them installed, and finally it complains about the kernel headers - unable to find source of kernel.
Looking around the web there seem to be a lot of 'this worked for me' -- with every solution being a bit different in critical details. I'd like to find not only a solution that will work for me, but also some explanation of the principals involved.
I'm beginning to suspect it may have to do with exactly how one configures 'public-yum-el5.repo'. I've always just enabled the section [el5_u7_base] (enabled=1) and left all other sections with 'enabled=0'. (and the 'u7' could vary, depending on what version I'm working with -- I've used 5.5 and 5.7). I just now built a new machine to try to crack this problem, and this time paid a lot more attention to what else was in the yum repo file. I noticed that not only are the '[el5_u(something)_base] sections:
[el5_latest]
[el5_ga_base]
[el5_u1_base]
[el5_u2_base]
[el5_u3_base]
[el5_u4_base]
[el5_u5_base]but also "ol" sections and "ol - UEK" sections:
[ol5_u5_base]
[ol5_u6_base]
[ol5_u7_base]
[ol5_u8_base]
[el5_addons]
[el5_oracle_addons]
[ol5_UEK_latest]
[ol5_UEK_base]
[el5_unsupported]I'm guessing that since "Oracle Enterprise Linux" is now simply "Oracle Linux", I should be using one of the "ol5" sections, and probably the 'ol5_UEK_latest'. Here's what I have actually installed for an OS:
[root@vblnxsrv01 yum.repos.d]# uname -a
Linux vblnxsrv01.vbdomain 2.6.32-200.13.1.el5uek #1 SMP Wed Jul 27 21:02:33 EDT 2011 x86_64 x86_64 x86_64 GNU/LinuxCan anyone clarify how these fit together, or point me to documentation to do so?
thanks.DBA(t home) wrote:
After using VMWorkstation quite happily for a few years, I've decided to give VBox a trywhy now VBox? what is better?I'm beginning to wonder, myself!
I could really vent, but I dont' want to come off sounding like some of the vistors to the db forum that complain because Oracle isn't just re-badged SQL Server. But every step has been a struggle for what appears to me to be no good reason. When I first started building personal test systems with VMware, I'd never built a *nix system for myself, and had a lot to learn. But I pretty well had it down in a weekend. This struggle with VBox has been much more difficult. -
Difficulty installing VBox guest additions to OEL 6.1 x64 system
I am having difficulty attempting to install VBox Guest Additions on my OEL 6.1 x64 system.
It seems to be similar to this recent thread:
Oracle Linux 6.1 - Kernel version and devel version mismatch
I have done the yum repo install of "http://public-yum.oracle.com/public-yum-ol6.repo", but both "yum install kernel-uek-devel" and "yum install kernel-devel-2.6.32-100.34.1.el6uek.x86_64" fail with "No package available".
Note that the second package I mentioned above is the one appearing in the VBoxAdditions shell output as needing to be installed. Yet, it doesn't seem to exist.
Any help would be deeply appreciated.After doing "wget http://public-yum.oracle.com/public-yum.ol6.repo" and placing the file in /etc/yum.repos.d/ , did you change "enabled=0" to "enabled=1" within the new yum config file?
-
Build the main Guest Additions module Failed
Hi all,
I am not very sure if I am in the correct forum here. My problem is I cannot install the VirtualBox Guest Additions 4.2.12_84980 on my Oracle Linux 5 update 6_x86_64 bits system. I followed the instructions in a tutorial :
cd /etc/yum.repos.d/
wget http://public-yum.oracle.com/public-yum-el5.repo
yum update
yum install gcc
yum install kernel-uek-devel-2.6.32-300.32.1.el5uek
These steps above all succeeded; but, when I run the installation as below:
cd /media/VBOXADDITIONS_4.2.12_84980/
sh ./VBoxLinuxAdditions.run
I got the error message:
Build the main Guest Additions module Failed
(Look at /var/log/vboxadd-install.log to find out what went wrong).
I have little experience in installing VirtualBox Additions on Oracle Linux. Can anybody pls give me some suggestions? Thanks a lot in advance.user571093 wrote:
Hi all,
I am not very sure if I am in the correct forum here.No. This forum is "Oracle Database - General Questions". Your question has nothing to do with Oracle Database.
Your problem is in the cracks between VBox and Oracle Linux. I'd suggest you mark this thread answered, then repost in the Oracle Linux Forum (Oracle Linux
My problem is I cannot install the VirtualBox Guest Additions 4.2.12_84980 on my Oracle Linux 5 update 6_x86_64 bits system. I followed the instructions in a tutorial :
cd /etc/yum.repos.d/
wget http://public-yum.oracle.com/public-yum-el5.repo
yum update
yum install gcc
yum install kernel-uek-devel-2.6.32-300.32.1.el5uek
These steps above all succeeded; but, when I run the installation as below:
cd /media/VBOXADDITIONS_4.2.12_84980/
sh ./VBoxLinuxAdditions.run
I got the error message:
Build the main Guest Additions module Failed
(Look at /var/log/vboxadd-install.log to find out what went wrong).Did you look at that file?
>
I have little experience in installing VirtualBox Additions on Oracle Linux. Can anybody pls give me some suggestions? Thanks a lot in advance.When you post in the Oracle Linux forum, be sure to show them the results of this command:
uname -aThat will be key to which kernel header package to install. -
Hi,
does someone else have the problem that he isn't able to build the virtualbox kernel module with the .24 kernel?
[root@arch holger]# vbox_build_module
Building Virtualbox-1.5.2 kernel modules for kernel 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:21:33 UTC 2008
for f in . linux r0drv r0drv/linux; do rm -f $f/*.o $f/.*.cmd $f/.*.flags; done
rm -rf .vboxdrv* .tmp_ver* vboxdrv.* Module.symvers Modules.symvers
make KBUILD_VERBOSE=1 -C /lib/modules/2.6.24-ARCH/build SUBDIRS=/opt/VirtualBox-1.5.2/src SRCROOT=/opt/VirtualBox-1.5.2/src modules
make[1]: Entering directory `/usr/src/linux-2.6.24-ARCH'
test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or include/config/auto.conf are missing."; \
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
mkdir -p /opt/VirtualBox-1.5.2/src/.tmp_versions ; rm -f /opt/VirtualBox-1.5.2/src/.tmp_versions/*
make -f scripts/Makefile.build obj=/opt/VirtualBox-1.5.2/src
gcc -m32 -Wp,-MD,/opt/VirtualBox-1.5.2/src/linux/.SUPDrv-linux.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.2.3/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -ffreestanding -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -Iinclude/asm-x86/mach-default -fomit-frame-pointer -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -I/lib/modules/2.6.24-ARCH/build/include -I/opt/VirtualBox-1.5.2/src/ -I/opt/VirtualBox-1.5.2/src/include -I/opt/VirtualBox-1.5.2/src/r0drv/linux -D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0 -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_X86 -DVBOX_WITHOUT_IDT_PATCHING -DUSE_NEW_OS_INTERFACE_FOR_MM -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(SUPDrv_linux)" -D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /opt/VirtualBox-1.5.2/src/linux/SUPDrv-linux.o /opt/VirtualBox-1.5.2/src/linux/SUPDrv-linux.c
In file included from /opt/VirtualBox-1.5.2/src/include/iprt/types.h:72,
from /opt/VirtualBox-1.5.2/src/include/VBox/types.h:21,
from /opt/VirtualBox-1.5.2/src/SUPDRV.h:26,
from /opt/VirtualBox-1.5.2/src/linux/SUPDrv-linux.c:22:
include/linux/types.h:40: Fehler: Redefinition des typedef »uintptr_t«
/opt/VirtualBox-1.5.2/src/include/iprt/stdint.h:118: Fehler: Vorherige Deklaration von »uintptr_t« war hier
In Datei, eingefügt von include/linux/thread_info.h:33,
von include/linux/preempt.h:9,
von include/linux/spinlock.h:49,
von /opt/VirtualBox-1.5.2/src/SUPDRV.h:87,
von /opt/VirtualBox-1.5.2/src/linux/SUPDrv-linux.c:22:
include/linux/bitops.h:6:1: Warnung: »BIT« redefiniert
In Datei, eingefügt von /opt/VirtualBox-1.5.2/src/include/VBox/cdefs.h:20,
von /opt/VirtualBox-1.5.2/src/SUPDRV.h:25,
von /opt/VirtualBox-1.5.2/src/linux/SUPDrv-linux.c:22:
/opt/VirtualBox-1.5.2/src/include/iprt/cdefs.h:1042:1: Warnung: dies ist die Stelle der vorherigen Definition
make[2]: *** [/opt/VirtualBox-1.5.2/src/linux/SUPDrv-linux.o] Fehler 1
make[1]: *** [_module_/opt/VirtualBox-1.5.2/src] Fehler 2
make[1]: Leaving directory `/usr/src/linux-2.6.24-ARCH'
make: *** [vboxdrv] Fehler 2ise wrote:Solution is here: http://bbs.archlinux.org/viewtopic.php?id=43709
or install virtualbox-modules from aur -
X doesn't start in Vbox with guest additions installed (Solved)
Hi all. I just installed Arch in Vbox and all went well until I installed the guest additions package with pacman. Now X won't start. I uninstalled the guest additions package and X starts normally.
Any ideas?
Last edited by pressman57 (2012-10-13 21:30:00)Scimmia wrote:iodine, I'm guessing OpenGL doesn't work, though? Not a big deal, but something to be aware of.
Well, at least glxgears runs, although with some warnings:
[iodine@arch ~]$ glxgears
OpenGL Warning: glFlushVertexArrayRangeNV not found in mesa table
OpenGL Warning: glVertexArrayRangeNV not found in mesa table
OpenGL Warning: glCombinerInputNV not found in mesa table
OpenGL Warning: glCombinerOutputNV not found in mesa table
OpenGL Warning: glCombinerParameterfNV not found in mesa table
OpenGL Warning: glCombinerParameterfvNV not found in mesa table
OpenGL Warning: glCombinerParameteriNV not found in mesa table
OpenGL Warning: glCombinerParameterivNV not found in mesa table
OpenGL Warning: glFinalCombinerInputNV not found in mesa table
OpenGL Warning: glGetCombinerInputParameterfvNV not found in mesa table
OpenGL Warning: glGetCombinerInputParameterivNV not found in mesa table
OpenGL Warning: glGetCombinerOutputParameterfvNV not found in mesa table
OpenGL Warning: glGetCombinerOutputParameterivNV not found in mesa table
OpenGL Warning: glGetFinalCombinerInputParameterfvNV not found in mesa table
OpenGL Warning: glGetFinalCombinerInputParameterivNV not found in mesa table
OpenGL Warning: glDeleteFencesNV not found in mesa table
OpenGL Warning: glFinishFenceNV not found in mesa table
OpenGL Warning: glGenFencesNV not found in mesa table
OpenGL Warning: glGetFenceivNV not found in mesa table
OpenGL Warning: glIsFenceNV not found in mesa table
OpenGL Warning: glSetFenceNV not found in mesa table
OpenGL Warning: glTestFenceNV not found in mesa table
5585 frames in 5.0 seconds = 1116.892 FPS
Not sure what that means, though. -
Installing ArchLinx+Guest Additions in Virtual Box(error during guest)
The Arch Linux install seemed to go through smoothly. I installed it using the wiki page, rebooted, and logged in as root. I am installing this for a class, so trying to follow the instructions to do so. Next, we are supposed to install 'Guest Additions' for Virtual box using the instructions below:
Now, you should install "Guest Additions" for VirtualBox. Guest additions allows you to share files between host and guest systems. This is very convenient for development as you will need to copy files back and forth between the host and guest operating systems. You can download Guest Additions at *link*.
You need to start the virtual machine before you can continue installing Guest Additions. To do that, just select your VM name from the list on the left hand side in VirtualBox and click Start. After logging into Arch Linux, you should mount this ISO image just as you had mounted the Arch Linux ISO file. You can then mount the cdrom inside the Guest OS by doing:
mkdir /mnt/cdrom
mount -t iso9660 /dev/cdrom0 /mnt/cdrom
Now install the guest additions by doing:
cd /mnt/cdrom
sh ./VBoxLinuxAdditions-x86.run
This will compile and install the kernel modules necessary for Guest Additions functionality. Please note that if you
recompile your own kernel (later as a part of project requirements), you will have to run this again so that the modules are
compiled and installed for the new kernel too.
Under settings for VBox, I mounted the Guest Additions image file, started Arch Linux, logged in as root, and followed the instructions above. I was able to do all of the above, but when I excute the last line, I am given this message:
http://img132.imageshack.us/img132/3971/linuxd.png
I have no idea where to go from here, and any help would be greatly appreciated.
Also, I feel like I have installed Arch Linux incorrectly. All the videos and pictures I see show a GUI type interface, but all I am presented with is a text-based interface. When I boot it up, it asks me to log in, and I am then taken to the command line, but I don't see the same GUI interface everyone else seems to have. Is this normal for a basic Arch Linux install? Thanks in advance.Arch has no GUI until you install one. Some people don't want a GUI, so it's left to the user. The base install has only a command line interface.
You should probably read the Beginners Guide.
In case you missed them, there's two short articles, also on the wiki that might help you understand Arch, Arch Linux and The Arch Way -
[solved] Virtualbox guest additions stopped working
Hi,
I got some trouble after an upgrade of kernel yesterday. Virtualbox guest additions doesn't work any longer, and I have tried both downgrading virtualbox-guest-additions and the new linux that got pushed yesterday, but it's still not working.
Is there some know issue related to this?
Do anyone have information on how to trace errors with Virtualbox, or any guide on how to fix this.
I have also tried a reinstall of the modules without success.
Thanks.
Last edited by grrrm (2014-10-08 15:45:45)Suddenly it worked
-
Failed to install VirtualBox Guest Addition on Oracle Linux 6.1
I can successfully install Oracle Linux 6.1 on VirtualBox 4.1. But failed to install VirtualBox Guest Additions with the following message: Building the main Guest Additions module [FAILED]. All other modules installed ok.
Actually you don't have do install the developer version. According to the documentation http://www.virtualbox.org/manual/ch04.html you will need to install gcc and kernel-devel packages. In case Oracle Enterprise Linux does not find the required packages, you either have to install them from a different source (e.g. DVD) or use Oracle's public Yum server located at http://public-yum.oracle.com.
-
VirtualBox Guest Addition install failed
Hello,
I just build a linux-guest virtual box and I am trying to install the guest addition and the first step is to run "/etc/init.d/vboxadd setup". I got the following error:
+"The heaers for the current running kernel were not found. If the following module compilation fails then this could be the reason. The missing package can be probably installed with+
+yum install kernel-devel-2.6.18-194.e15+
+You system does not seem to be set up to build kernel modules. Look at /var/log/vboxadd-install.log to find out what went wrong. Once you have corrected it, you can run /etc/init.d/vboxadd setup to build them."+
And the log file reads:
+"*** Error: unable to find the sources of your current linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop"+
I then tried "yum install dkms". This time no error but it says +"No package dkms available . Nothing to do".+ Also, my /usr/src/kernels directory is empty. I dont know if this is part of the reason.
Thanks for the help.
Harryuser11957149 wrote:
It says no package kernel-devel-2.6.18-194.e15 available. How can i install this package?I think that the 1 should be an 'l' - ie: kernel-devel-2.6.18-194.el5. Also, you should double-check your running kernel to make sure that corresponds to the version you are running.
Edited by: JaredGreenwald on May 4, 2011 10:26 PM -
Virtualbox guest addition install issue on oel 64bit guest
Hi,
my configuration is
windows 7 home 64 bit -
virtualbox 4.1.8
I installed oel 64 bit guest
and now I am trying to install the guest addition . but while installing it failed
Building the main guest additon module FAILED
it says of a missing package kernel-devel-2.6.32-100.26.2.el5
so I did
yum install kernel-devel-2.6.32-100.26.2.el5
but now it complains
ULN support will be disabled
No package kernel-devel-2.6.32-100.26.2.el5 available
appreciate any suggestion
thanks
Kart
sharing 2 wonderful links
https://blogs.oracle.com/fatbloke/entry/virtualbox_and_the_unbreakable_enterprise
http://www.oracle.com/technetwork/articles/servers-storage-admin/vmlove-1368887.html
Edited by: user12046749 on Feb 21, 2012 6:27 AMThanks Avi..:) seems like i am progressing..
[root@localhost yum.repos.d]# cat /etc/oracle-release
Oracle Linux Server release 5.6
so now I enabled all the enabled in the repos file . after that I was able to
[root@localhost yum.repos.d]# yum install kernel-uek-devel-2.6.32-100.26.2.el5
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package kernel-uek-devel.x86_64 0:2.6.32-100.26.2.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
===============================================================================================================
Package Arch Version Repository Size
===============================================================================================================
Installing:
kernel-uek-devel x86_64 2.6.32-100.26.2.el5 ol5_u6_base 6.6 M
Transaction Summary
===============================================================================================================
Install 1 Package(s)
Upgrade 0 Package(s)
Total download size: 6.6 M
Is this ok [y/N]: y
Downloading Packages:
kernel-uek-devel-2.6.32-100.26.2.el5.x86_64.rpm | 6.6 MB 00:21
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : kernel-uek-devel 1/1
Installed:
kernel-uek-devel.x86_64 0:2.6.32-100.26.2.el5
Complete!
[root@localhost yum.repos.d]#
after that when i try to run guest addition it complains of gcc utility not found. Is there some other rpms that I need to install for guestaddition to run succesfully.
Please let me know... thank you for the wonderful tips
Kart. -
How can i install virtualbox-guest-additions?
pacman -S virtualbox-guest-additions
edit rc.conf
MODULES=(vboxguest vboxsf vboxvideo)
under gnome
glxgears 60.975fps
but under centos 5.6 gnome 559.203fps
how would i do to so fast?
Last edited by oddhornedant (2011-04-25 10:03:56)This is the only entry I have in MODULES=(vboxdrv)
I use Vbox from AUR as they work for me.
I use win7/winxp fedora debian etc as guests with full access to usb/ shared drives etc.and full screen where possible as some distros do not do full screen in vbox without a lot of fiddling
are you in the correct groups with out the correct permissions they do not work usbmux:x:140:username
vboxusers:x:108:username -
[S]Systemd can't start Load Kernel Modules after upgrade to Linux 4.0
After upgrading from linux 3.19.3-3 to 4.0.1-1 I've been having a bit of an issue. At that same time I upgraded readline (6.3.006-1 → 6.3.008-1), linux-firmware (20150206.17657c3-1 → 20150410.ec89525-1), nvidia (349.16-1 → 349.16-2) , wpa_suplican (2.4-1 → 1:2.3-1), and arpack (3.1.5-1 → 3.2.0-1). There may be some typos there since I'm copying by hand. Normally this wouldn't be much of a problem because I have been, priory to a few weeks ago, really good about back ups and would just roll my OS back 15 minutes. But things like that tend to fly out the window when the semester gets heavy. My last snapshot was on May 22nd, which I could still use, but would rather not. Also, it seems like a good idea to try to actual fix things for a change.
[edit] I should mention that this upgrade was run April 30th.[/edit]
When I finished booting the system after the upgrade, I got an error message during boot “systemd[1]: Failed to start Load Kernel Modules.” When it finished booting I run “dmesg -l err” to confirm that I'm not having a bad day dream or something. I'm also still seeing the errors that I described in this thread. Don't know if the two are related. I also noticed, when I was logging in, that it said that my stystem was still using the old kernel. Indeed, according to “uname -r” I'm still using 3.19.3-3-ARCH.
The closest thing to experience I have with this is when I forget to mount /boot before upgrading linux, so I made sure /boot was mounted and rand “sudo pacman -S linux” to reinstall, but this didn't help. Just to check I ran “ls /lib/modules” and see the directorys “4.0.1-1-ARCH” and “extramodules-4.0-ARCH” as I would expect after a succesful upgrade of the kernel.
Running “systemctl –failed, shows that in addition to systemd-modules-load.service, lm_sensors.service has also failed. I somehow expect lm_sensors depends on systemd-modules-load. I tried “systemctl restart systemd-modules-load”, but was rewarded with a message telling me that it failed. The “journalctl -xe” log has the lines
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
Looking at the Wiki for Systemd under troubleshooting it actually has an example of trying to work through this exact issue. Following that I tried
journalctl _PID=1799
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
which I already mentioned. At this point that bit of the Wiki stopped being useful.
Looking up on Google Failed to look up alias 'nfs': Function not implemented returned this thread from two years ago. Running “lsmod |grep sg” or $lsmod |grep nfs” returns nothing, but it also returns nothing on this laptop I'm using as well, so I don't imagine that is useful. Also, “# grep nfs /lib/modules/4.0.1-1-ARCH/modules.alias” returns a “Nosuch file or directory” error.
Searching for something on 'sg' turned up https://bbs.archlinux.org/viewtopic.php?id=165361, which was also not useful.
As a sort of last resort I tried https://wiki.archlinux.org/index.php/Do … the_kernel
I reboot and boot into my fallback installation, running 3.19.3-3, mount the partition with my main Arch on it, and arch-chroot into it.
I downgraded linux, and nvidia, exited chroot, and rebooted hoping to the Great Bacon that I didn't do anything too damaging. After all, my back ups are more than a week out of date.
This worked. I'm still getting those annyoing (they are only annoying right?) error messages I mentioned earlier. My system seems fine, if somewhat out of date.
Still, the question remains, “why did that happen, and how do I actually fix it?”
[edit2=solution]
There were two problems. First, my grub.cfg entry was pointing to the wrong UUID. I fixed this by regenerating it. Then I noticed the UUID in the grub menu itself (during the boot prosses) did not match what was in grub.cfg. To fix this I reinstalled grub.
Last edited by nstgc (2015-05-05 12:07:30)Well, I took snapshots, not back ups but they work well enough for this, and rsynced /boot/ to where it use to be, moved/renamed the subvolume boot, and commented out the appropriate line in fstab. I also deleted that other /boot from before. I unmount /boot, and regenerate my grub.cfg. If my machine still boots, I'll try for an upgrade.
grub.cfg now looks like
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
font="/arch/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sdd2)' --class windows --class os $menuentry_id_option 'osprober-chain-30F403F0F403B75E' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt2 --hint-efi=hd3,gpt2 --hint-baremetal=ahci3,gpt2 30F403F0F403B75E
else
search --no-floppy --fs-uuid --set=root 30F403F0F403B75E
fi
chainloader +1
menuentry 'Windows Vista (loader) (on /dev/sdd4)' --class windows --class os $menuentry_id_option 'osprober-chain-FE2648382647EFE7' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt4 --hint-efi=hd3,gpt4 --hint-baremetal=ahci3,gpt4 FE2648382647EFE7
else
search --no-floppy --fs-uuid --set=root FE2648382647EFE7
fi
chainloader +1
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch (on /dev/sdd5)' $menuentry_id_option 'osprober-gnulinux-advanced-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
linux16 /arch/boot/memtest86+/memtest.bin
fi
### END /etc/grub.d/60_memtest86+ ###
It seems as if the lines you mentioned, Scimmia, have changed. I'll take that as a good sign.
[edit] System still boots. Trying for the upgrade.
[edit2] Still can't use Linux 4.0. I'm getting the same errors as before.
[edit3] Successfully downgraded.
[edit4] I looked through /etc/mkinitcpio.conf and there isn't anything in there that isn't in my laptop's. I don't know if this will help, but here is the output of "pacman -Q"
a52dec 0.7.4-8
aalib 1.4rc5-10
abs 2.4.4-2
accountsservice 0.6.40-1
acl 2.2.52-2
adobe-source-han-sans-jp-fonts 1.002-1
adwaita-icon-theme 3.16.0-1
alsa-lib 1.0.29-1
alsa-plugins 1.0.29-2
alsa-utils 1.0.29-1
alsi 0.4.7-1
arch-install-scripts 15-1
arch-wiki-docs 20150219-1
arch-wiki-lite 20150219-2
archlinux-keyring 20150212-1
arpack 3.2.0-1
aspell 0.60.6.1-2
asunder 2.7-1
at-spi2-atk 2.16.0-1
at-spi2-core 2.16.0-1
atk 2.16.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.15-1
avahi 0.6.31-15
awesome 3.5.6-1
bash 4.3.033-1
bash-completion 2.1-5
bc 1.06.95-1
bcache-tools 1.0.8-1
bigpkg 0.4.0-2
binutils 2.25-2
bison 3.0.4-1
blas 3.5.0-1
bluez 5.30-1
bluez-libs 5.30-1
bonnie++ 1.97-1
boost 1.58.0-1
boost-libs 1.58.0-1
btrfs-progs 3.19.1-1
bullet 2.82-1
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.18-3
ca-certificates-utils 20150402-1
cabextract 1.4-3
cairo 1.14.2-1
cairo-clock 0.3.4-4
cairo-dock 3.4.1-1
cairo-dock-plug-ins 3.4.1-1
cairomm 1.10.0-3
calibre 2.27.0-1
cantarell-fonts 0.0.16-2
caribou 0.4.18.1-1
cddb-py 1.4-7
cdparanoia 10.2-5
cdrdao 1.2.3-7
cdrtools 3.01a28-1
celt 0.11.3-2
cfv 1.18.3-6
cheese 3.16.1-1
chmlib 0.40-4
chromaprint 1.1-2
chromium 42.0.2311.135-1
chromium-pepper-flash 1:17.0.0.169-3
cifs-utils 6.4-1
cinnamon-desktop 2.4.2-1
cinnamon-translations 2.4.4-1
clementine 1.2.3-5
clucene 2.3.3.4-8
clutter 1.22.0-2
clutter-gst2 2.0.14-1
clutter-gtk 1.6.0-2
cmus 2.6.0-4
cogl 1.20.0-1
colord 1.2.9-2
colord-gtk 0.1.26-2
compositeproto 0.4.2-3
confuse 2.7-3
coreutils 8.23-1
cracklib 2.9.4-1
cryptsetup 1.6.6-1
cups 2.0.2-4
cups-filters 1.0.68-1
cups-pk-helper 0.2.5-1
curl 7.42.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.2-1
dhcpcd 6.8.1-1
dia 0.97.3-1
dialog 1:1.2_20150225-1
dictd 1.12.1-4
diffutils 3.3-2
ding-libs 0.4.0-3
djvulibre 3.5.27-1
dnssec-anchors 20150403-1
dotconf 1.3-4
dri2proto 2.8-2
dri3proto 1.0-1
dvd+rw-tools 7.1-5
dvdisaster 0.72.6-1
e2fsprogs 1.42.12-2
ecryptfs-utils 106-1
ed 1.11-1
efl 1.13.2-1
elementary 1.13.2-1
elfutils 0.161-3
enca 1.16-1
enchant 1.6.0-5
enlightenment 0.19.4-1
evas_generic_loaders 1.13.2-1
evince 3.16.0-1
exempi 2.2.2-1
exfat-utils 1.1.1-1
exif-py 1.2.0-1
exiv2 0.24-1
expac 4-3
expat 2.1.0-4
extcalc 0.9.3_1-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.2-1
fbreader 0.99.4-4
ffmpeg 1:2.6.2-1
fftw 3.3.4-1
file 5.22-1
file-roller 3.16.1-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 37.0.2-1
fixesproto 5.0-3
flac 1.3.1-1
flashplugin 11.2.202.457-1
flex 2.5.39-1
fltk 1.3.3-4
fluidsynth 1.1.6-4
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db 3:20150308-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fribidi 0.19.6-2
fsarchiver 0.6.19-1
fuse 2.9.3-2
fuse-exfat 1.1.0-1
gawk 4.1.2-1
gc 7.4.2-2
gcc-fortran 4.9.2-4
gcc-libs-multilib 4.9.2-4
gcc-multilib 4.9.2-4
gconf 3.2.6-3
gcr 3.15.92-1
gd 2.1.1-2
gdb 7.9-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
geany 1.24.1-1
gemrb 0.8.2-1
geoclue 0.12.99-2
geoclue2 2.2.0-2
geocode-glib 3.16.0-1
gettext 0.19.4-1
ghostscript 9.16-1
giflib 5.1.1-1
git 2.3.7-1
gjs 1.43.3-1
glew 1.12.0-1
glib-networking 2.44.0-2
glib2 2.44.0-1
glibc 2.21-3
glibmm 2.44.0-1
glproto 1.4.17-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-2
gnome-bluetooth 3.16.1-1
gnome-color-manager 3.16.0-1
gnome-control-center 3.16.1-2
gnome-desktop 1:3.16.1-1
gnome-dictionary 3.16.1-1
gnome-disk-utility 3.16.0-1
gnome-menus 3.13.3-1
gnome-online-accounts 3.16.0-2
gnome-session 3.16.0-1
gnome-settings-daemon 3.16.1-1
gnome-shell 3.16.1-2
gnome-shell-extensions 3.16.1-1
gnome-system-monitor 3.16.0-1
gnome-themes-standard 3.16.0-1
gnome-tweak-tool 3.16.1-1
gnome-video-effects 0.4.1-1
gnupg 2.1.3-3
gnuplot 5.0.0-2
gnutls 3.4.0-1
gobject-introspection 1.44.0-1
gobject-introspection-runtime 1.44.0-1
google-chrome 42.0.2311.135-1
gparted 0.22.0-1
gpgme 1.5.4-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
grilo 0.2.12-1
groff 1.22.3-3
grsync 1.2.5-1
grub 1:2.02.beta2-5
gsettings-desktop-schemas 3.16.1-1
gsfonts 20150122-1
gsm 1.0.13-8
gssproxy 0.4.1-1
gst-libav 1.4.5-1
gst-plugins-bad 1.4.5-2
gst-plugins-base 1.4.5-1
gst-plugins-base-libs 1.4.5-1
gst-plugins-good 1.4.5-2
gst-plugins-ugly 1.4.5-2
gstreamer 1.4.5-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gstreamer0.10-good 0.10.31-6
gstreamer0.10-good-plugins 0.10.31-6
gstreamer0.10-python 0.10.22-2
gstreamer0.10-ugly 0.10.19-14
gstreamer0.10-ugly-plugins 0.10.19-14
gthumb 3.4.0-1
gtk-update-icon-cache 2.24.27-1
gtk2 2.24.27-1
gtk3 3.16.2-1
gtkmm 2.24.4-1
gtkmm3 3.16.0-1
guile 2.0.11-2
gvfs 1.24.1-1
gvfs-mtp 1.24.1-1
gzip 1.6-1
hal-info 0.20091130-2
harfbuzz 0.9.40-2
harfbuzz-icu 0.9.40-2
haveged 1.9.1-2
hdparm 9.45-1
hdsentinel 0.8-2
help2man 1.46.4-1
hicolor-icon-theme 0.13-1
hplip 3.15.4-1
hspell 1.2-2
htmlcxx 0.85-4
htop 1.0.3-2
hunspell 1.3.3-1
hwids 20150129-1
hwinfo 21.10.1.1-1
hwloc 1.10.1-1
hyphen 2.8.8-1
i3-wm 4.10.2-1
i3lock 2.6-1
i3status 2.9-1
i7z 0.27.2.git1-1
iana-etc 2.30-4
icedtea-web 1.5.2-1
icu 55.1-1
imagemagick 6.9.1.0-1
imagewriter 1.10.1420800585.134a9b3-1
imlib2 1.4.7-1
inetutils 1.9.2-2
innoextract 1.4-0
inputproto 2.3.1-1
intel-tbb 4.3_20150209-1
intel-ucode 20150121-1
inxi 2.2.19-1
iproute2 3.19.0-1
iptables 1.4.21-3
iputils 20121221-3
ipython 3.1.0-1
iso-codes 3.57-1
jack 0.124.1-3
jansson 2.7-1
jasper 1.900.1-13
java-environment-common 2-2
java-runtime-common 2-2
jdk7-openjdk 7.u79_2.5.5-1
jfsutils 1.1.15-4
jmtpfs 0.5-1
jre7-openjdk 7.u79_2.5.5-1
jre7-openjdk-headless 7.u79_2.5.5-1
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
jsoncpp 1.4.4-1
julia 2:0.3.7-1
julia-docs 2:0.3.7-1
kbd 2.0.2-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
kvirc 4.2.0-4
lame 3.99.5-2
lapack 3.5.0-1
lcms 1.19-5
lcms2 2.6-1
ldb 1.1.20-1
ldns 1.6.17-2
less 471-1
lgogdownloader-git 20150310-1
lib32-acl 2.2.52-2
lib32-alsa-lib 1.0.29-1
lib32-alsa-plugins 1.0.29-2
lib32-atk 2.16.0-1
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-cairo 1.14.2-1
lib32-curl 7.41.0-1
lib32-db 5.3.28-2
lib32-e2fsprogs 1.42.12-1
lib32-elfutils 0.161-2
lib32-expat 2.1.0-2
lib32-fakeroot 1.20.2-1
lib32-flac 1.3.1-1
lib32-flashplugin 11.2.202.457-1
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gdk-pixbuf2 2.31.3-2
lib32-gettext 0.19.4-1
lib32-giflib 5.1.1-1
lib32-glew 1.12.0-1
lib32-glib2 2.44.0-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-gmp 6.0.0-1
lib32-gnutls 3.4.0-2
lib32-gsm 1.0.13-9
lib32-gtk2 2.24.27-1
lib32-harfbuzz 0.9.40-2
lib32-icu 55.1-1
lib32-jack 0.124.1-1
lib32-json-c 0.12-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-lcms2 2.6-1
lib32-libaio 0.3.110-1
lib32-libasyncns 0.8-7
lib32-libcanberra 0.30-4
lib32-libcap 2.24-1
lib32-libcl 1.1-1
lib32-libcups 2.0.2-2
lib32-libdbus 1.8.16-1
lib32-libdrm 2.4.60-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libidn 1.30-1
lib32-libjpeg-turbo 1.4.0-1
lib32-libldap 2.4.40-1
lib32-libltdl 2.4.5-1
lib32-libnl 3.2.25-1
lib32-libogg 1.3.2-1
lib32-libpcap 1.6.2-1
lib32-libpciaccess 0.13.4-1
lib32-libpng 1.6.16-1
lib32-libpulse 6.0-1
lib32-libsamplerate 0.1.8-2
lib32-libsm 1.2.2-1
lib32-libsndfile 1.0.25-3
lib32-libssh2 1.5.0-1
lib32-libtasn1 4.4-1
lib32-libtiff 4.0.3-3
lib32-libtxc_dxtn 1.0.1-5
lib32-libusb 1.0.19-1
lib32-libvorbis 1.3.5-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcomposite 0.4.4-2
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.2-1
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxft 2.3.2-1
lib32-libxi 1.7.4-1
lib32-libxinerama 1.1.3-1
lib32-libxml2 2.9.2-1
lib32-libxmu 1.1.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-libxshmfence 1.2-1
lib32-libxslt 1.1.28-2
lib32-libxt 1.1.4-1
lib32-libxtst 1.2.2-1
lib32-libxxf86vm 1.1.4-1
lib32-llvm-libs 3.6.0-1
lib32-mesa 10.5.4-1
lib32-mpg123 1.22.1-1
lib32-ncurses 5.9-3
lib32-nettle 3.1.1-1
lib32-nspr 4.10.8-1
lib32-nss 3.18-1
lib32-nvidia-libgl 349.16-1
lib32-nvidia-utils 349.16-1
lib32-openal 1.16.0-1
lib32-openssl 1.0.2.a-1
lib32-p11-kit 0.23.1-2
lib32-pango 1.36.8-1
lib32-pcre 8.36-1
lib32-pixman 0.32.6-1
lib32-portaudio 19_20140130-1
lib32-readline 6.3.008-1
lib32-sdl 1.2.15-6
lib32-soundtouch 1.8.0-1
lib32-sqlite 3.8.9-1
lib32-systemd 219-1
lib32-tdb 1.3.4-1
lib32-util-linux 2.26.1-1
lib32-v4l-utils 1.6.0-1
lib32-wayland 1.7.0-1
lib32-wxgtk 3.0.2-4
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libabw 0.1.1-1
libaio 0.3.110-1
libao 1.2.0-1
libarchive 3.1.2-8
libart-lgpl 2.3.21-3
libass 0.12.1-1
libassuan 2.2.0-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.8.0-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-5
libcanberra-pulse 0.30-5
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcdr 0.1.1-2
libcl 1.1-4
libcroco 0.6.8-2
libcue 1.4.0-4
libcups 2.0.2-4
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdca 0.0.5-4
libdrm 2.4.60-2
libdv 1.0.0-6
libdvbpsi 1:1.1.2-1
libdvdcss 1.3.0-1
libdvdnav 5.0.2-1
libdvdread 5.0.1-1
libe-book 0.1.2-2
libebml 1.3.1-1
libedit 20150325_3.1-1
libepoxy 1.2-2
libetonyek 0.1.1-1
libev 4.19-1
libevdev 1.4.2-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.3-1
libftdi-compat 0.20-1
libgcrypt 1.6.3-2
libgcrypt15 1.5.4-4
libgdm 3.16.1.1-1
libgee 0.18.0-1
libglade 2.6.4-5
libgme 0.6.0-3
libgnome-keyring 3.12.0-2
libgnomekbd 3.6.0-2
libgpg-error 1.19-1
libgpod 0.8.3-4
libgssglue 0.4-2
libgsystem 2015.1-1
libgtop 2.30.0-1
libgusb 0.2.4-1
libgweather 3.16.1-1
libgxps 0.2.2-3
libibus 1.5.10-1
libical 1.0.1-2
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.30-1
libiec61883 1.2.0-4
libimobiledevice 1.2.0-1
libinput 0.14.1-1
libirman 0.4.5-4
libjpeg-turbo 1.4.0-1
libkate 0.4.1-5
libksba 1.3.3-1
liblastfm 1.0.9-1
libldap 2.4.40-2
liblqr 0.4.2-1
libmaa 1.3.2-2
libmad 0.15.1b-7
libmatroska 1.4.2-1
libmediainfo 0.7.73-1
libmikmod 3.3.7-1
libmm-glib 1.4.6-1
libmms 0.6.4-1
libmng 2.0.2-3
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.3-1
libmpcdec 1.2.6-4
libmpeg2 0.5.1-5
libmspub 0.1.2-2
libmtp 1.1.8-1
libmwaw 0.3.4-1
libmygpo-qt 1.0.8-1
libndp 1.4-1
libnewt 0.52.18-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libodfgen 0.1.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpagemaker 0.0.2-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.4-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
libpulse 6.0-1
libpwquality 1.2.3-1
libquvi 0.9.4-3
libquvi-scripts 0.9.20131130-2
libqzeitgeist 0.8.0-4
libraw 0.16.0-3
libraw1394 2.1.0-2
libreoffice-fresh 4.4.2-1
librevenge 0.0.2-1
librpcsecgss 0.19-8
librsvg 1:2.40.9-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.2.0-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsidplay 1.36.59-6
libsigc++ 2.4.1-1
libsigsegv 2.10-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsodium 1.0.2-1
libsoup 2.50.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh 0.6.5-1
libssh2 1.5.0-1
libsystemd 219-6
libtar 1.2.20-2
libtasn1 4.4-1
libteam 1.14-2
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtiger 0.3.4-4
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunibreak 1.1-1
libunistring 0.9.5-1
libunwind 1.1-2
libupnp 1.6.19-1
libusb 1.0.19-1
libusb-compat 0.1.5-1
libusbmuxd 1.0.10-1
libutempter 1.1.6-2
libutil-linux 2.26.1-3
libva 1.5.1-1
libvdpau 1.1-1
libvisio 0.1.1-2
libvisual 0.4.0-5
libvorbis 1.3.5-1
libvpx 1.4.0-2
libwacom 0.11-1
libwbclient 4.2.1-1
libwebp 0.4.3-1
libwmf 0.2.8.4-12
libwpd 0.10.0-1
libwpg 0.3.0-1
libwps 0.3.1-1
libx11 1.6.3-1
libx264 2:144.20150223-1
libx86 1.1-4
libx86emu 1.1.23.1-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxp 1.0.3-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.9-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
libyaml 0.1.6-1
libzen 0.4.31-1
libzip 0.11.2-1
licenses 20140629-1
links 2.9-1
linux 3.19.3-3
linux-api-headers 3.18.5-1
linux-firmware 20150410.ec89525-1
lirc 1:0.9.2.a-1
llvm-libs 3.6.0-5
lm_sensors 3.3.5-1
logrotate 3.8.9-1
lpsolve 5.5.2.0-3
lrzip 0.621-1
lua 5.2.4-1
lua-bitop 1.0.2-5
lua-expat 1.3.0-1
lua-lgi 0.8.0-2
lua-socket 3.0rc1-4
lua51 5.1.5-4
luajit 2.0.3-3
lvm2 2.02.116-1
lxdream 0.9.1-3
lz4 128-1
lzo 2.09-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.83-1
mcomix 1.01-1
mcpp 2.7.2-5
mdadm 3.3.2-1
memtest86+ 5.01-1
mencoder 37379-3
mesa 10.5.4-1
metamorphose2 0.8.3-2
mime-types 9-1
minitube 2.4-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mkvtoolnix-cli 7.8.0-3
mobile-broadband-provider-info 20120614-2
morituri-git 0.2.3.r3.gb1d685f-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mpg123 1.22.1-1
mplayer 37379-3
mtdev 1.1.5-1
mutagen 1.28-1
mutter 3.16.1.1-1
ncurses 5.9-7
nemo 2.4.5-1
neon 0.30.1-1
net-snmp 5.7.3-1
netctl 1.10-2
nettle 3.1.1-1
network-manager-applet 1.0.0-2
networkmanager 1.0.0-2
nfs-utils 1.3.2-6
nfsidmap 0.26-1
nm-connection-editor 1.0.0-2
npth 1.2-1
nspr 4.10.8-1
nss 3.18-3
ntfs-3g 2015.3.14-1
nvidia 349.16-1
nvidia-libgl 349.16-1
nvidia-utils 349.16-1
ogmtools 1.5-5
openal 1.16.0-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openmpi 1.8.4-1
openresolv 3.6.1-1
openssh 6.8p1-2
openssl 1.0.2.a-1
opus 1.1-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.23.1-2
p7zip 9.38.1-3
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pacmatic 20150126-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pangomm 2.36.0-1
par2cmdline-tbb 20141125-1
parallel 20150322-1
parted 3.2-2
patch 2.7.5-1
pciutils 3.3.1-1
pcmciautils 018-7
pcre 8.36-2
pcsx2-git 1.3.1.r978.1aebca3-1
perl 5.20.2-1
perl-clone 0.37-2
perl-data-dump 1.22-1
perl-dbi 1.633-1
perl-encode-locale 1.04-1
perl-error 0.17023-1
perl-file-basedir 0.07-1
perl-file-listing 6.04-2
perl-file-which 1.09-4
perl-html-parser 3.71-3
perl-html-tagset 3.20-4
perl-http-cookies 6.01-2
perl-http-daemon 6.01-2
perl-http-date 6.02-2
perl-http-message 6.06-2
perl-http-negotiate 6.01-2
perl-ipc-system-simple 1.25-1
perl-libwww 6.08-1
perl-locale-gettext 1.05-11
perl-lwp-mediatypes 6.02-2
perl-net-http 6.07-1
perl-uri 1.67-1
perl-www-robotrules 6.02-2
perl-xml-libxml 2.0121-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
phonon-qt4 4.8.3-1
phonon-qt4-gstreamer 4.8.2-1
phoronix-test-suite 5.6.0-1
php 5.6.8-2
pinentry 0.9.1-1
pixman 0.32.6-1
pkg-config 0.28-2
pkgfile 15-1
pms 1.90.1-1
podofo 0.9.3-1
polkit 0.112-2
poppler 0.32.0-1
poppler-glib 0.32.0-1
poppler-qt5 0.32.0-1
popt 1.16-7
portaudio 19_20140130-1
presentproto 1.0-1
printproto 1.0.5-3
procps-ng 3.3.10-2
protobuf 2.6.1-1
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 6.0-1
pulseaudio-alsa 2-3
pv 1.6.0-1
pygobject-devel 3.16.1-1
pygobject2-devel 2.28.6-11
pygtk 2.24.0-5
pyqt4-common 4.11.3-4
pyqt5-common 5.4.1-2
python 3.4.3-2
python-dateutil 2.4.1-1
python-dbus 1.2.0-4
python-dbus-common 1.2.0-4
python-gmpy2 2.0.5-2
python-gobject 3.16.1-1
python-html2text 2015.4.14-1
python-matplotlib 1.4.3-2
python-mpmath 0.19-1
python-nose 1.3.6-1
python-numexpr 2.4.3-1
python-numpy 1.9.2-2
python-pandas 0.16.0-2
python-pygments 2.0.2-2
python-pyparsing 2.0.3-1
python-pyqt4 4.11.3-4
python-pyqt5 5.4.1-2
python-pytz 2015.2-1
python-pyzmq 14.5.0-2
python-scipy 0.15.1-2
python-setuptools 1:15.2-1
python-sip 4.16.7-1
python-six 1.9.0-1
python-sympy 0.7.6-2
python-tornado 4.1.0-2
python-xdg 0.25-2
python2 2.7.9-1
python2-apsw 3.8.9-1
python2-atspi 2.16.0-1
python2-beaker 1.7.0-1
python2-cairo 1.10.0-2
python2-chardet 2.3.0-1
python2-cherrypy 3.6.0-1
python2-cssselect 0.9.1-2
python2-cssutils 1.0-2
python2-dateutil 2.4.1-1
python2-dbus 1.2.0-4
python2-dnspython 1.12.0-1
python2-gobject 3.16.1-1
python2-gobject2 2.28.6-11
python2-html5lib 0.999-5
python2-lxml 3.4.4-1
python2-mako 1.0.1-1
python2-markupsafe 0.23-2
python2-mechanize 0.2.5-4
python2-netifaces 0.10.4-1
python2-pillow 2.8.1-1
python2-psutil 2.2.1-2
python2-pycdio 0.20-3
python2-pygments 2.0.2-2
python2-pyqt5 5.4.1-2
python2-setuptools 1:15.2-1
python2-sip 4.16.7-1
python2-six 1.9.0-1
python2-xdg 0.25-2
qca 2.0.3-5
qca-ossl 2.0.0-7
qjson 0.8.1-3
qpdf 5.1.2-1
qt4 4.8.6-5
qt5-base 5.4.1-4
qt5-declarative 5.4.1-4
qt5-location 5.4.1-4
qt5-script 5.4.1-4
qt5-sensors 5.4.1-4
qt5-svg 5.4.1-4
qt5-tools 5.4.1-4
qt5-translations 5.4.1-4
qt5-webchannel 5.4.1-4
qt5-webkit 5.4.1-4
qt5-xmlpatterns 5.4.1-4
qtchooser 48-1
qtwebkit 2.3.4-1
randrproto 1.4.1-1
raptor 2.0.15-2
rasqal 1:0.9.32-1
readline 6.3.008-1
recode 3.6-8
recordproto 1.14.2-2
redland 1:1.0.17-2
reflector 2014.11-1
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
rest 0.7.93-1
rhash 1.3.3-1
rng-tools 5-3
rpcbind 0.2.3-1
rsync 3.1.1-2
rtkit 0.11-5
rtmpdump 20140918-2
ruby 2.2.2-1
s-nail 14.8.0-1
sbc 1.3-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdcv 0.4.2-8
sdl 1.2.15-7
sdl_image 1.2.12-3
sdl_mixer 1.2.12-4
sdl_net 1.2.8-2
sdl_ttf 2.0.11-3
sed 4.2.2-3
sg3_utils 1.40-1
shadow 4.2.1-3
shared-color-targets 0.1.5-1
shared-mime-info 1.4-1
sip 4.16.7-1
slang 2.3.0-1
smartmontools 6.3-2
smbclient 4.2.1-1
smpeg 0.4.5-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spandsp 0.0.6-1
speech-dispatcher 0.8.1-1
speedtest-cli 0.3.1-1
speex 1.2rc2-1
speexdsp 1.2rc3-1
spotify 0.9.17.1-1
spotify-gnome-git 20141010-1
sqlite 3.8.9-1
startup-notification 0.12-4
steam 1.0.0.49-3
sudo 1.8.13-1
suitesparse 4.4.4-1
sysfsutils 2.1.0-9
systemd 219-6
systemd-sysvcompat 219-6
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.2-1
tar 1.28-1
tdb 1.3.4-1
telepathy-glib 0.24.1-1
telepathy-logger 0.8.1-1
telepathy-mission-control 5.16.3-1
terminology 0.8.0-1
tevent 0.9.24-1
texinfo 5.2-3
texlive-bin 2014.34260-7
texlive-core 2014.36709-1
texlive-langchinese 2014.35921-1
texlive-langcjk 2014.0-1
texlive-langjapanese 2014.36466-1
texlive-langkorean 2014.36573-1
texlive-latexextra 2014.36706-1
texlive-pictures 2014.36605-1
texlive-science 2014.36659-1
texmaker 4.4.1-1
thin-provisioning-tools 0.4.1-1
thunderbird 31.6.0-2
tinyxml 2.6.2-3
tmux 1.9_a-2
totem-plparser 3.10.4-1
transmission-gtk 2.84-1
tsmuxer 1.10.6-14
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
tzdata 2015d-1
udisks2 2.1.5-1
unrar 1:5.2.7-1
unzip 6.0-10
upower 0.99.2-2
usbutils 008-1
util-linux 2.26.1-3
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vim 7.4.712-1
vim-latexsuite 20130126-2
vim-runtime 7.4.712-1
vlc 2.2.1-2
vte-common 0.40.0-2
vte3 0.40.0-2
wavpack 4.70.0-2
wayland 1.7.0-1
webkit2gtk 2.8.1-1
webkitgtk 2.4.8-2
webrtc-audio-processing 0.1-2
wesnoth 1.12.2-2
wesnoth-data 1.12.2-1
wget 1.16.3-1
which 2.21-1
wildmidi 0.3.8-1
wine 1.7.42-2
winetricks 20141130-1
wireless_tools 30.pre9-1
wpa_supplicant 1:2.3-1
wxgtk 3.0.2-4
wxgtk2.8 2.8.12.1-3
wxpython 3.0.2.0-1
wxpython2.8 2.8.12.1-1
x265 1.6-1
xboxdrv 0.8.5-3
xcb-proto 1.11-1
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xdg-su 1.2.3-1
xdg-utils 1.1.0.git20150323-1
xdiskusage 1.51-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.2-1
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.2-1
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-appres 1.0.4-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-5
xorg-server-common 1.17.1-5
xorg-server-devel 1.17.1-5
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-util-macros 1.19.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xscreensaver 5.32-1
xvidcore 1.3.3-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zenity 3.14.0-1
zeromq 4.0.5-1
zita-alsa-pcmi 0.2.0-2
zita-resampler 1.3.0-3
zlib 1.2.8-3
zvbi 0.2.35-1
zziplib 0.13.62-2
[edit5] My /etc/modules-load.d directory is empty by the way, and "sudo /usr/lib/systemd/systemd-modules-load" returns nothing. Note, this is all while running Linux 3.19, but I believe it should demonstrate that I don't have any special modules running. Or so I believe.
Last edited by nstgc (2015-05-04 13:16:09) -
[Solved] (WW) fglrx(0): Kernel Module version does *not* match driver.
fglrx has just recently stopped working, and I can't quite pinpoint when that was because I honestly hadn't noticed until checking. I've tried a few reinstalls and different xorg options so far, but had no luck.
glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
Xorg.0.log:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux yggdrasil 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 11 10:14:15 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "mx518"
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "off"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0269 card 1043,8122 rev 80 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 00:0a:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 00:0e:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,810d rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfd900000 - 0xfdefffff (0x600000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x9ff00000 - 0xbfefffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xb0000000/27, 0xfde00000/16, I/O @ 0xd000/8, BIOS @ 0xfdd00000/17
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xa8000000/27, 0xfdc00000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Reloading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.38.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E48) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e4088
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[20] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[21] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[22] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[23] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[24] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[26] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[27] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[28] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[29] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[30] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[31] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[33] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[34] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[35] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9800 PRO" (Chipset = 0x4e48)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xfde00000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R360
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R360
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AIC Model: 9450 Serial#: 329
(II) fglrx(0): Year: 2006 Week: 33
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.647 redY: 0.346 greenX: 0.298 greenY: 0.591
(II) fglrx(0): blueX: 0.150 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 70 vid: 35457
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 135.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: F-419
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff000523509449010000
(II) fglrx(0): 2110010380251e78e8e595a5584c9726
(II) fglrx(0): 1e5054bfef808180818a818c01010101
(II) fglrx(0): 010101010101bc34009851002a403070
(II) fglrx(0): 1300782d1100001ed60980a0205e6310
(II) fglrx(0): 10605208782d1100001a000000fd0032
(II) fglrx(0): 4b1e500e000a202020202020000000fc
(II) fglrx(0): 00462d3431390a2020202020202000ba
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 37 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (370, 300) mm
(--) fglrx(0): DPI set to (87, 86)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b]
[1] 0 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[8] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[9] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[11] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[12] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[13] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[14] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[15] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[23] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[24] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[25] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[26] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[27] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[29] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[30] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[31] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[32] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[33] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[34] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[35] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[36] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[37] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[38] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xb4000
(II) fglrx(0): [drm] mapped SAREA 0xb4000 to 0xb7282000
(II) fglrx(0): [drm] framebuffer handle = 0xb5000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xb4000 at 0xb7282000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
fbarea0->box.x1 0x00000000, fbarea0->box.y1 0x00000404
fbarea0->box.x2 0x00000500, fbarea0->box.y2 0x00000406
icon[0].start=0x505000
fbarea1->box.x1 0x00000000, fbarea1->box.y1 0x00000406
fbarea1->box.x2 0x00000500, fbarea1->box.y2 0x00000408
icon[1].start=0x508000
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) mx518: Device: "/dev/input/mice"
(**) mx518: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) mx518: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "10"
(==) mx518: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) mx518: ZAxisMapping: buttons 4 and 5
(**) Option "ButtonMapping" "1 2 3 6 7"
(**) mx518: Buttons: 14
(**) Option "Resolution" "800"
(**) mx518: Resolution: 800
(II) XINPUT: Adding extended input device "mx518" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) mx518: ps2EnableDataReporting: succeeded
xorg.conf:
Section "ServerLayout"
Identifier "Xorg"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "mx518" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "off" # Disable AIGLX
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
# Fonts
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "fglrx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Options
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
# Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "mx518"
Driver "mouse"
# Options
Option "CorePointer"
Option "Resolution" "800"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "10"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AG Neovo"
ModelName "F-419"
HorizSync 24.0 - 80.0
VertRefresh 50.0 - 75.0
# Options
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
VendorName "All"
BoardName "All"
Driver "fglrx"
# Options
# Option "XAANoOffscreenPixmaps" "true"
# Option "AGPMode" "8"
# Option "ColorTiling" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "XEVIE" "Enable"
# Option "Composite" "Enable"
#Endsection
Would it be possible to explain the other warnings in Xorg.0.log? Rather curious about those apart from the obvious one, too.
Thanks.
Last edited by Newnux (2007-07-11 16:04:15)Indeed, that seems the end-all error of it all.
I'll summarise my warnings, some for curious reasons:
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) # What's this?
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found # Not a problem.
(WW) fglrx(0): Only one display is connnected,so single mode is enabled # No problem.
(WW) fglrx(0): Kernel Module version does *not* match driver.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
Anyway, I wondered about versions and noticed this:
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xbc000
(II) fglrx(0): [drm] mapped SAREA 0xbc000 to 0xb7285000
(II) fglrx(0): [drm] framebuffer handle = 0xbd000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver. # included to show where this was displayed
All versions previous to that show 8.38.6:
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
So I assume I have an old version dotted around somewhere, but I'm not sure about how it's all loaded and such.
Now, quoting something I'd come across a few times and taking it from thinkwiki:
If you lose hardware acceleration after a driver update this can be caused by an old fglrx kernel module being loaded.
Check out /var/log/Xorg.0.log for a message like:
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You can verify this yourself by looking at the version message some lines above. It should read something not matching the installed version like:
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.10.19
The cause for this trouble might be that there resist multiple versions of the fglrx module within the kernel module search path.
Go to /lib/modules/<your linux kernel version>/ and type # grep fglrx modules.dep.
If grep finds multiple lines you nailed down the problem. All you have to do now is to delete any versions of the module (look at the filedate) but the most current one. Then run # depmod and you are done.
Hint:
Newer versions (8.21.7) of the fglrx module seem to be installed in the extra/ subdirectory.
Older versions (8.19.10) used to be located in the kernel/drivers/char/drm/ subdirectory.
How does this apply to Arch? I only found one instance of fglrx by using that method.
Edit: Forgot to add that I've tried reinstalling a few times, it doesn't really seem to do anything. Wondering if I should attempt to install an older version or something, but I don't get why the driver numbers don't match for me. Surely others have updated their drivers too.
Last edited by Newnux (2007-07-11 13:28:55) -
[Solved] Failed to initialize the NVIDIA kernel module
Hi all,
I've just made the jump to arch and have a fresh install. I'm having trouble getting the nvidia drivers to work. I am currently using the nouveau drivers without issue.
The method I am using - after much trial - is:
- uninstall nouveau and mesa lib
- install nvidia package
- remove nouveau module entry in mkinitcpio.conf
- run `mkinitcpio -p linux`
- edit .conf in xorg.conf.d with minimal required settings. Currently:
Section "Device"
Identifier "device0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
I have installed the linux-headers package and tried reinstalling nvidia again
Card:
01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
Kernel:
3.12.6-1-ARCH
My Xorg.0.log looks like:
[ 3.979]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 3.979] X Protocol Version 11, Revision 0
[ 3.979] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 3.979] Current Operating System: Linux arch.tempera 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 3.979] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 3.979] Build Date: 13 December 2013 03:11:42PM
[ 3.979]
[ 3.979] Current version of pixman: 0.32.4
[ 3.979] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 3.979] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 4 21:29:46 2014
[ 3.980] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.980] (==) No Layout section. Using the first Screen section.
[ 3.980] (==) No screen section available. Using defaults.
[ 3.980] (**) |-->Screen "Default Screen Section" (0)
[ 3.980] (**) | |-->Monitor "<default monitor>"
[ 3.981] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 3.981] (**) | |-->Device "device0"
[ 3.981] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.981] (==) Automatically adding devices
[ 3.981] (==) Automatically enabling devices
[ 3.981] (==) Automatically adding GPU devices
[ 3.984] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.984] Entry deleted from font path.
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.984] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.984] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.984] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.984] (II) Loader magic: 0x7fec20
[ 3.984] (II) Module ABI versions:
[ 3.984] X.Org ANSI C Emulation: 0.4
[ 3.984] X.Org Video Driver: 14.1
[ 3.984] X.Org XInput driver : 19.1
[ 3.984] X.Org Server Extension : 7.0
[ 3.985] (--) PCI:*(0:1:0:0) 10de:0dc4:19da:1184 rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.986] Initializing built-in extension Generic Event Extension
[ 3.986] Initializing built-in extension SHAPE
[ 3.986] Initializing built-in extension MIT-SHM
[ 3.986] Initializing built-in extension XInputExtension
[ 3.986] Initializing built-in extension XTEST
[ 3.986] Initializing built-in extension BIG-REQUESTS
[ 3.986] Initializing built-in extension SYNC
[ 3.986] Initializing built-in extension XKEYBOARD
[ 3.986] Initializing built-in extension XC-MISC
[ 3.986] Initializing built-in extension SECURITY
[ 3.986] Initializing built-in extension XINERAMA
[ 3.986] Initializing built-in extension XFIXES
[ 3.986] Initializing built-in extension RENDER
[ 3.986] Initializing built-in extension RANDR
[ 3.986] Initializing built-in extension COMPOSITE
[ 3.986] Initializing built-in extension DAMAGE
[ 3.986] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.986] Initializing built-in extension DOUBLE-BUFFER
[ 3.986] Initializing built-in extension RECORD
[ 3.986] Initializing built-in extension DPMS
[ 3.986] Initializing built-in extension X-Resource
[ 3.986] Initializing built-in extension XVideo
[ 3.986] Initializing built-in extension XVideo-MotionCompensation
[ 3.986] Initializing built-in extension XFree86-VidModeExtension
[ 3.986] Initializing built-in extension XFree86-DGA
[ 3.986] Initializing built-in extension XFree86-DRI
[ 3.986] Initializing built-in extension DRI2
[ 3.986] (II) LoadModule: "glx"
[ 3.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.075] (II) Module glx: vendor="NVIDIA Corporation"
[ 4.075] compiled for 4.0.2, module version = 1.0.0
[ 4.075] Module class: X.Org Server Extension
[ 4.075] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 4.076] Loading extension GLX
[ 4.076] (II) LoadModule: "nvidia"
[ 4.076] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.082] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.082] compiled for 4.0.2, module version = 1.0.0
[ 4.082] Module class: X.Org Video Driver
[ 4.083] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 4.083] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.083] (++) using VT number 7
[ 4.090] (II) Loading sub module "fb"
[ 4.090] (II) LoadModule: "fb"
[ 4.090] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.091] (II) Module fb: vendor="X.Org Foundation"
[ 4.091] compiled for 1.14.5, module version = 1.0.0
[ 4.091] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.091] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 4.091] (II) Loading sub module "wfb"
[ 4.091] (II) LoadModule: "wfb"
[ 4.091] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.092] (II) Module wfb: vendor="X.Org Foundation"
[ 4.092] compiled for 1.14.5, module version = 1.0.0
[ 4.092] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.092] (II) Loading sub module "ramdac"
[ 4.092] (II) LoadModule: "ramdac"
[ 4.092] (II) Module "ramdac" already built-in
[ 4.093] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.093] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4.093] (==) NVIDIA(0): RGB weight 888
[ 4.093] (==) NVIDIA(0): Default visual is TrueColor
[ 4.093] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.094] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.095] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 4.095] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 4.095] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 4.095] (EE) NVIDIA(0): *** Aborting ***
[ 4.095] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4.095] (II) UnloadModule: "nvidia"
[ 4.095] (II) UnloadSubModule: "wfb"
[ 4.095] (II) UnloadSubModule: "fb"
[ 4.095] (EE) Screen(s) found, but none have a usable configuration.
[ 4.095] (EE)
Fatal server error:
[ 4.095] (EE) no screens found(EE)
[ 4.095] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 4.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4.095] (EE)
[ 4.107] (EE) Server terminated with error (1). Closing log file.
The only entry I found in `dmesg | grep nvidia` related to nvidia-drm, and seemed to say it was loaded successfully. I didn't save the exact entry and i've reinstalled nouveau now so that I could post this.
Any help much appriciated. I've been at this for a while. Learning a lot in the process!
Last edited by gnibbler (2014-01-04 22:31:49)Success! Several days of trying various things and I finally give in and make a post to this forum. One more attempt - which was only really so that I could add modprobe info to this post - and it works.
I had at some stage installed the driver xf86-video-nv, and this may have been causing the clash. I un-installed it, and followed the procedure above to reinstall nvidia.
I think the main hang up I'd had is that I had not been rebuilding my kernel image with mkinitcpio after installing nvidia during my previous attempts.
I hope some info in here helps some other stuck archer.
Edit: Thanks graysky. I had found the right nvidia driver using the arch wiki and followed this advice to remove the nouveau hook. Much appriciated.
Last edited by gnibbler (2014-01-04 22:35:00)
Maybe you are looking for
-
How to edit the text of a certain column in SALV_WD_TABLE in ESS layout
hi,expert. i want to change the text of the column:appraisee name in ESS worklist. Application :HAP_START_PAGE_POWL_UI_ESS Web Dynpro Component: SALV_WD_TABLE Window Information: TABLE View Information: VIEW_TABLE how can i achieve i
-
Error while saving skills in Career and Job Subarea regd ESS
HI Experts, I am workin with ESS and it is configured. There is an error while saving the SKILLS in Career and Job I am getting an error Important primary table entries are missing in table OBJS -> no tran, error I am pure portal guy and no idea on
-
[VIA] I have some problems with the KT6V motherboard...
This is what i have right now for that motherboard: i have an AMD Athlon XP 2800+, All-in-Wonder ATI Video Card, and recently bought a PC3200 512MB DDR ram for it Well I installed everything that should be connected to the motherboard, when I turn it
-
SaveAs Document Failed (80043768)
Can anyone explain why this error is occurring? A user is trying to save a Deski doc to their favourites folder. According to BusinessObjects Notes, it says this error message is generated when the user has insufficient rights to the category. Thi
-
Design Studio logon screen missing
Installed Design studio 1.3 on Windows 7 machine. Launched the application. I see welcome screen. But i don't see logon screen. Any help?