VBScript control Excel via COM works in Excel 2010 but NOT in Excel 2013
Hi All,
Does anyone know of any reason why VBscript that using COM to connect to Excel and perform some basic functions would stop working when I move to Excel 2013? I have several VBscripts that run perfectly in 2010 but I get the following error when I try
using Excel 2013:
OLE error code 0x80070001:Unknown COM status code
I can't even get a very simple test VBscript to open a new workbook in Excel.
Has anyone come across this error or have any suggestions regarding the cause and/or resolution?
Thanks in advance!
John
We cannot tell unless you post an example of the code the causes this error along with the complete error message.
¯\_(ツ)_/¯
Similar Messages
-
Wifi connection good - everything working. Can get through to my partner via facetime app on my phone but not Macbook Air?
Hi Sophie172,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
Cheers,
- Judy -
How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
Br
FinnYou would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.
-
Adobe Flash 10.1 works on admin login but not other logins
Latest Adobe Flash 10.1 (7/25/10) works on admin login but not other logins despite being installed "for all users". No change from 32-bit to 64-bit Internet Explorer 8 running under Windows 7. Repeated uninstalls/reinstalls/reboots has no effect. Using online uninstaller also has no effect. User Account Control is OFF. Interestingly enough, the same situation occurs on another computer with the same environment except running Vista. Any thoughts would be helpful to [email protected] Thank you!
FYI:
Erratic Flash Player 10.1 Functionality with Limited Windows User Accounts
http://forums.adobe.com/message/2998516#2998516 -
HELP!! WRT54G2 works for one computer, but not for the other
I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!
As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online... -
uploaded a performance video on actors access, but cant view it on my account. I get the audio, but the screen is green. It does come up on other computers, but not mine. Is it my quicktime's not downloaded or upgraded?
Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect. -
I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark -
Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.
Try here > http://support.apple.com/kb/TS1538
-
when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?
Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.
-
I-pod touch works on a Mac but not a PC
Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!
I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
I was wondering about that one in particular.
Try configuring you CA as per kalda01's instructions in this post:
http://discussions.apple.com/message.jspa?messageID=10525876#10525876
(Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.) -
Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.
I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes
OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.
-
hello all,
i wanted to post about a bug i am experencing on Messages app under os x mountain lion...
when someone tries to send me an imessage with a picture it only comes through to my iphone and ipad but not my laptop.. OR it will come through on my computer but not on my iPhone and iPad
This issue is intermittent it will basicly work when it wants to....
also upon closing imessage i get a message saying there is a file transfer in progress... when i review file transfers it shows any picture file that my friends have attempted to send to me but dont download.... It seems that the picture is trying to download but never does.
anyone else have this problem?Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac: Messages ▹ Preferences ▹ Accounts ▹ Sign out.
Sign out on the iPhone: Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out.
Then, on the phone, tap Use Your Apple ID for iMessage.
Sign back into iMessage on both devices and test.
Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com. -
Trying to play playlist on Apple TV. It worked at one time, but not now. Home sharing is on, on the computer; but apple TV keeps asking me to turn home sharing on.
What gives?Hello hobartco,
Home sharing will, indeed, need to be set up on your Apple TV, as well.
Setting up Home Sharing for Apple TV (2nd generation and 3rd generation)
http://support.apple.com/kb/HT4352
Cheers,
Allen -
Why won't my apple id and password work on my iPhone? It is working on my Macbook but not the iPhone?
there might be something different on the mac you can try appleid.apple.com and reset your password i would also check the mac to see which appleid is signed you may have multiple apple ids and not know
-
My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?
OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
Flex mobile 4.6 app works inside flash builder but not in android emulator
Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:ns1="*"
xmlns:local="*"
creationComplete="windowedapplication1_creationCompleteHandler(event) "
actionBarVisible="true" tabBarVisible="true">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected var requestTokenUrl:String = "https://www.google.com";
protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
var loader:URLLoader = new URLLoader();
loader.addEventListener(ErrorEvent.ERROR, onError);
loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
loader.load(urlRequest);
protected function requestTokenHandler(event:Event):void
protected function httpResponse(event:HTTPStatusEvent):void
label.text += event.status;
// TODO Auto-generated method stub
private function completeHandler(event:Event):void {
label.text += event.toString();
trace("completeHandler data: " + event.currentTarget.data);
private function openHandler(event:Event):void {
label.text += event.toString();
trace("openHandler: " + event);
private function onError(event:ErrorEvent):void {
label.text += event.toString();
trace("onError: " + event.type);
private function onAsyncError(event:AsyncErrorEvent):void {
label.text += event.toString();
trace("onAsyncError: " + event);
private function onNetStatus(event:NetStatusEvent):void {
label.text += event.toString();
trace("onNetStatus: " + event);
private function progressHandler(event:ProgressEvent):void {
label.text += event.toString();
trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
private function securityErrorHandler(event:SecurityErrorEvent):void {
label.text += event.toString();
trace("securityErrorHandler: " + event);
private function httpStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
//label.text += event.responseHeaders.toString();
trace("httpStatusHandler: " + event);
private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
trace("httpStatusHandler: " + event);
private function ioErrorHandler(event:IOErrorEvent):void {
label.text += event.toString();
label.text += event.text;
trace("ioErrorHandler: " + event);
]]>
</fx:Script>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View>
Maybe you are looking for
-
Problems when viewing page in IE but not in Firefox - Help
Please help! I'm new to using tables in Dreamweaver. I built my page in Photoshop, sliced it and then opened it in Dreamweaver. It looks fine on my Mac but when viewed on a PC in IE it appears as though there are lines or gaps between the cells of my
-
Please give me ask about my ibook.
Please give me ask, I have a ibook G4 with OS 10.5.8. Now, Could I upgrate to 10.6.8?
-
Can i access phone menu without a sim card in, can i access phone menu without a sim card in
hi i want to access my iphone 4 but have not yet got a working sim in it, is this possible ?
-
Hi All, I have 2 XY graphs in my VI and for some reason 1 XY is super slow in response. I have attached my vi here which demonstrates the behavior. There are 2 XY graphs. The one on the top is super slow in response and the one below behaves normally
-
Hi, We have valid licenses for an oracle 9i R2 Database. We can not upgrade as we dont pay for technical support, and we have no need for the features 10/11g offer. 9i is perfect for our needs plus we do not have the funds to upgrade the DB to one of