Vbuk update with tcode va02 but sales order is completed

Hello,
I have a problem that the sales order is created via EDI IDOC_INPUT_ORDERS and if I look into the sales order in the table VBUK the field "Header billing dat." is A so the "Header data" is A. I can see the incomplete document in v.02. If I open the Sales order there is the message nrV1800:"Docuemnt is complete" but it is not.
If I go into conditions(goto->header->condition) and save the document without making any change - the status in the VBUK is set to C and I can process the document.
Does anybody know what could be the problem of the situation?????
If there are many Sales Orders the users have to open them just for saving which is strange.
Thank you for answer and help in advance.
Regards
Marceli

Hallo Mr K Gopidas,
first of all thank you very much for answer.
"...Could you kindly attempt the following experiment:-
Enter a sales order directly in the system, without proceeding to the condition screen.
Is it created with (VBUK) status C?..."
I did this operation making manually an order without proceeding to the condition screen and the status in VBUK was set to C.
But during the creation I had two warrning messages:
1.the division from the item is different from the division of the header,
2.there is no VAT registration number fro company code MY in country HU
(the country HU is the country where the consignment stok is)
Further, as the document is completed on opening the sales order, item conditions, are there any manual conditions in the sales order, which get activated on changing the document?
Would there be any message displayed at the time?
I have check each condition and in the section "Control data" the "Condit.origin" is never as C - "Manually entered" if this is the field You mean?
how to check the manual conditions in the sales order, did I do it correctly?
After the analysis of the IDOCs which are comming I saw the the problem usually occures for the last segment of the IDOC with the same material number from the customer.
Could it be connected with this case?
I hope you give me more tips.
Thank you in advance again.
Regards
Marceli

Similar Messages

This field cannot be updated as there are open sales order lines

When trying to enable Item Attributes then I am getting a message "This field cannot be updated as there are open sales order lines". I cancelled the Sales Order ( which was having only 1 sales order line and that is also cancelled) but still I am getting the same message.
How to overcome this problem.
Khan

Thanks Karthik & Sandeep........
Issue got fixed. There was an open Sales order Line because of that line the issue was coming. After cancelling that SO Line, Users were able to update the Item field.
Regards,
Khan.
http://moreapps4u.blogspot.com/

TO CREATE AN INVOICE WITH REFERENCE TO THE SALES ORDER

I have a credit memo request(sales order) and I need to create a credit memo(invoice) on saving the sales order without creating the delivery order in between.The invoice(credit memo) must be created directly with "reference" to the sales order(credit memo request) without the delivery order in between

Hi,
You can deliver the standard sales order by VA02 going to sales document-> deliver.
then save it it will give you outbound delivery number then go to vl02n the do the PGI of the same.
and for Invoices first create billing document byVF01 then create invoice list VF21
Thanks
Ankur
Edited by: Ankur Sharma on Jul 23, 2008 7:51 AM

Update error in RV_SALES_DOCUMENT_ADD during Sales order creation

I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
Am I missing any configuration parameters?
Thanks,
Chitra

Yes , I can see the error in ST22.
While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
- I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
    Analysis of error shows:
     Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
      Fails in the Read table in one of the form
        Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
The main program was "RSM13000 ". In the source code you have the termination point in
line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
of the (Include) program "LV45UF0V".
The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
Thanks,
Csuman

One sales order with reference to 2 sales orders

Hi Gurus,
can v create one sales order with reference to 2 sales orders?
i think it is not possible, but if there is any chance let me know?
Cheers,
Sumith

First u need to ensure whether copy controls are maintained between the documents (say Ex ZOR ---> ZOR) here i am assuming that ur source and target document are of same type)
Maintain the controls.
Then u need to create the source documents and save.
Then, u need to create the target document by using the create with reference button, enter the first reference order no and proceed further. ater entering into the order, again u need to press the create with reference button for the second time to enter the second reference order.
Now both the order items will come to a single order. now u can proceed further
Hope it is useful...
reward points if u found useful..

ORDERS05 - Create a Return with reference to a Sales Order

Hi all,
I'm trying to create a return with reference to a sales order via IDOC ORDERS05. I'm indicating referenced Sales Order number into segment E1EDK02; indicating qualifier (QUALFR = 002) and Sales order number (BELNR). By this way, I create a Customer Return but without reference.
Which fields or segment have to be filled in order to create it correctly?
Thanks
Marí

Correct...
You need something like:
*Get the pricing cond number.
select single knumv from vbak into cond
where vbeln = '0000080347'.
if sy-subrc = 0.
Get the pricing record which are by line item.
select * from konv into table konv_tbl where knumv = cond.
Loop thru them one line at a time.
loop at konv_tbl.
   bapi_cond-itm_number = '000010'.
    bapi_cond-cond_st_no = konv_tbl-stunr.
    bapi_cond-cond_count = konv_tbl-zaehk.
CALL FUNCTION 'BAPI_CUSTOMERRETURN_CREATE'
EXPORTING
    RETURN_HEADER_IN               = bapi_hdr
   BUSINESS_OBJECT               = 'BUS2102'
    CONVERT                        = 'X'
IMPORTING
    SALESDOCUMENT                 = bapi_salesdoc
   RETURN                        = BAPI_RET
TABLES
    RETURN                        = bapi_ret_tbl
    RETURN_ITEMS_IN                = bapi_itm
    RETURN_ITEMS_INX               = bapi_itm_out
    RETURN_PARTNERS                = bapi_prtnr
    RETURN_SCHEDULES_IN            = bapi_schd_lin
    RETURN_CONDITIONS_IN           = bapi_cond. "pricing
ORDER_TEXT                    = bapi_text.

Creation of Billing with reference to the Sales Order

Dear Friends,
I need your suggestion for the following scenario.
Client wants to create the Billing Document with reference to the Sales order.I mean when he is entering sales Order while creating the billing document ,the system should generate the billing document only for the delivered quantity.
e.g sales order is created for 100 Tons.And there are 5 delivery documents for 50 Tons.(Still the Sales order is open).
Now when billing document is created with reference to the sales order ( Not with reference to the Delivery Document) it should create the billing document only for these five deliveries.
Is it possible? If yes,how?
Thanks in advance.
Regards,
Shrikant

Hi Murali,
Currently client has software where he enters only Sales Order no and their software creates the billing for the delivery document for this Sales Order.
Here client does not want to enter multiple delivery document nos if any.He wants to enter only Sales Order no.
Regards,
Shrikant

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

Invoice VF01 with reference to the sales order

Dear Experts,
Our business requirement is to book the invoice with reference to the sales order without posting delivery and PGI. Provide me the step by step process to complete this configuration.
Is that suggestible to change the existing document type which the business is using by creating delivery PGI and Invoice to the document type where invoice booking with reference to sales order or I have to go with the new document type only.
With Regards
Uday
Message was edited by: G Lakshmipathi
Please dont add such text in your post which is not encouraged in SCN.

TW Typewriter
can you help, by creating the entire process in Sandbox and informing uday about the configuration steps?
At the outset, please refrain posting like this which, being a senior member of SCN, you should be aware of rules where spoon feeding is definitely not encouraged. Those sort of efforts have to be taken by OP. This forum is only to guide the people wherever they get stucked.
cc: Phanikumar V
You should also be knowing the forum rules and I thought, you would have expressed like what I said above.
G. Lakshmipathi

Single Invoice with reference to 2 Sales Order

Hi,
How can i make a single billing invoice no (vf01) with reference to 2 sales order?
billing plan has been maintained from each sales order,we dont have any pgi process.
so process is sales order->billing plan-> invoice
my user want to generate single invoice with reference to 2 sales order - same customer no.

For processing billing due list (VF04) - The system combines documents with the same customer number, proposal billing type and sales organization, and attempts to include them all in the same billing document. If the preconditions are met, then a single invoice is created for the deliveries and/or orders.
To do a collective billing. Collective Billing Documents
The selected documents in the billing due list are billed. The system tries to combine them as much as possible. Processing of the selected documents is carried out in the background. After processing of the documents, you return to the billing due list. The sysytem will indicate whether or not a document has been billed successfully.
If successful, then Save
You can also carry out a simulation of billing. In this case, select Simulate. The system simulates the collective billing / online function described above.
-After the collective run you can display a log for the collective run. This displays possible errors during billing.
-You can also branch to the resulting billing documents, in order to carry out a split analysis.
-The billing documents of a collective run can also be canceled.
Re: VF04
Hope it assist you.
Thanks & Regards
JP

Credit memo with reference to a sales order with reference to a contract?

Hello All
Now I created a quantity contract and the customer paid the Amount that means the billing is done then I started creating sales orders with reference to the contract, can I create credit memos with reference to these sales orders?
Regards
Jacopo Francois

Hi,
You can create a contract for a longer duartion say 1 year, andyou can create sales order in reference to your contract. This would be an ideal scenario in case of service materials.
You can now surely create credit memo's in reference to this sales order.
You will invoice the sales order first and create a credit memo request in reference to your sales invoice and then invoice the credit memo request to raise your credit memo for the customer.
Reward if helpful.
Regards
Ravi

Create a Sales order with reference to another sales order using BAPI

Dear All,
Can any one tell me what are all the parameters required to create a Sales order with reference to another sales order using BAPI_SALESORDER_CREATEFROMDAT2....
Thanks in advance

Hi Madhan
Thanks a lot for your reply.
However, I would like to know which parameters need to passed in this BAPI in case of SO creation with reference. I beleive there are only a few parameters that need to passed in ORDER_HEADER_IN, ORDER_ITEMS_IN, etc.
Need to know exactly which are these parameters.
Regards
Mihir Shah.

Create a Revenue Order with Reference to a Sales Order

Hi Gurus,
I have specific requirement of creating a Revenue Order ( ZCAR ) with Reference to a Sales Order. The Issue is when I create a Revenue Order from Sales Order by using the BAPI to Copy the data from Original Sales Order it will create copy the data which is there in Original Sales order. My Requirement is when I create the Revenue Order I should have Credit Line which is same as the Order Line from Orignal Sales order and also I need to have a debit line ( which will be a copy of Credit Line ) only difference is Item Categories will be different .
Please tell me how can I add the debit line in this Scenario and which BAPI's should I use to do this.
Thanks,
Raj

What is the IO you have assigned in the Sales Order please?
Just check the Sales Order - Account assignement, so that you can able to change if there is a different IO.
System won't pick up IO automayically until unless you secify in Sales order to done OKB9 settings.
Chek the above
Thanks

Purchase requisition with reference to blocked sales order

Hello,
we are creating purchase requisitions (PR) manually with reference to a sales order (account assignment Z). When this sales order is blocked, we still can issue the purchase requistion.
What can we do to avoid this? I think in 2 solutions:
- use enhancement MEREQ001 to show error message when SO is blocked, so PR is not created. Is this possible?
- create a release strategy for PR created in that plant (tr. OME6). The problem is that release strategy refers to an amount in the PO, and not to other factor, like SO blocked. Maybe in the former enhancement we can set the field EBAN-GSFRG to 'X'?
Thanks for your help.

Many thanks for your answer. It help me to solve the issue.
So applying note 738171, with transaction OVB5 (or VOFM, requirements->subsequent functions->Purch.requisitions) we create one new requirement, ie RV07A900, and then we apply the rule that if we have delivery or billing block, that is, VBAK-LIFSK or VBAK-FAKSK not empty, then we set an error with a code similar to this:
            da_sy-msgid = 'Z1'.    (message class)
            da_sy-msgno = '001'. (message number)
            error_exception = true.
and then the PR is not created.
Regards.

BAPI to create sales order with reference to another sales order

hi all,
is there a bapi that allows you to create a sales order with reference to another sales order?
thanks,
V

Hi Valencia,
I think the normal BAPI (BAPI_SALESORDER_CREATEFROMDAT1)will do. You will have to fill the fields REF_DOC, REF_DOC_IT, REF_DOC_CA of the table ORDER_ITEMS_IN (and make sure that Customizing settings allow you to copy from order to order).
Regards,
John.

Vbuk update with tcode va02 but sales order is completed

Similar Messages

Maybe you are looking for