VC 05 Sales support monitor
Hi Gurus,
I need to understand transaction VC 05 (Sales Support Monitor), if any body can forward some good link get going.
Thanks & Regards
Bawa
Use this link to know
Sourse : SAP Help
[Sales Support|http://help.sap.com/saphelp_erp60_sp/helpdata/en/10/748534c4603c34e10000009b38f83b/frameset.htm]
Similar Messages
-
Change Layout in Sales Support Monitor
Hi,
We want to change layout of Sales support Monitor. T. code VC05. We can change the layout but can not save the changed layout. Can you please help us, how we can save the changed layout?
Regards,
SoumenHi Sanjay,
Thanks for your reply. I am not asking about selection screen variant. Once we execute VC05 we get the report. I am asking about Report layout. Is there any possibility to change report layout?
Regards,
Soumen -
Reference of sales area in follow-up action of sales support
Hello Experts,
our client need to create a follow-up action from a contact (sales support document) in reference of a billing document.
In the follow-up action the system takes automatically the sales area of the contact and leaves these field unchangable.
Because of internal reasons contact and billing document can have diferent sales area, especifically the sector can vary, as they have a comon sector 00 for all sales documents. The sales area of the follow-up action should always be the same as in the billing document. But in case of diferent sales areas the system does not permit the reference to the billing document.
What can we do to make the system take the sales area from the reference document and not from the contact?
I would be very greatful for your help!
CristinaHi Cristina,
I am having the similar issue.If you have got the solution for this issue kindly share the same with me.
Thanks,
Bhushan -
Dear Gurus,
Kindly let me know the Step by Step Procedure for Configuring the SAP Sales Support in SAP SD.
any doc. will be highly appreciable.
Wishes,
Abhishekhow are you searching the pdf
Go to Google, key in text "Sales Support+SAP" and execute. You will get all inputs from there.
thanks
G. Lakshmipathi -
Can Pavillion dm4 with Intel HD Graphics support monitor with 2560 X 1440 resolution?
Trying to upgrade my monitor. It is hooked with HP Pavillion DM4 laptop. Can Pavillion dm4 with Intel HD Graphics support monitor with 2560 X 1440 resolution? Thanks.
HetnNeed full model number and Intel HD version (4000, 4600?) and which port you are using. Generally HDMI output is capped at full HD; 1920 x 1080.
-
Will the T4i AV out support monitoring audio as a movie is being shot?
I'm using a T4i to shoot videos and wonder if the AV out will support monitoring the audio as it's being recorded by pluging in a head phone with correct plugs/adaptors, etc.?
Hi Mikezerby,
The AV Out terminal is not designed to allow audio monitoring during a movie shoot.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Chat support link going to sales support
Just tried to get into chat support but the link is going to sales support. Can you please get it changed. The new version says its support but the entry form has changed and the person I spoke with didn't seem to have any idea what I was talking about or was able to help with my question (how to change who receives the weekly report) at all
This the the new link on the website for chat with support: https://sales.liveperson.net/hc/57472748/?cmd=file&file=visitorWantsToChat&site=57472748&v isitor=5520819318907&msessionkey=336866646992
cheers
debDear Arun,
Donu2019t get tensed with the new responsibilities in retail industry most of the tickets you will get would be from Masters Records (Customer, Material), Material Determination, Listing & Exclusion, Free Goods etc.
All the best for your new Endeavour.
Regards,
Ashutosh -
Sorting out after sales support
Apple have sent me a return package for a defective ipod. The box was delivered whilst I was away on business. The deliverer stated that collection would be the next day - as it was a working day no one was available - surprise! I am now back at my home address and have the return package BUT cannot find any way of arranging a collection. There is no way of contacting apple other than this medium. They also claim that they are going to charge me for not returning in time. Is there anyone on this forum who can tell me how to fix this otherwise Apple's after sales support is in danger of becoming a byword for disaster.
ipod Windows XPNikki
Thanks for the reply. I suppose its obvious. However I still find Apples support web site very unhelpful in this regard.
Windows XP -
Pre sales/Sales/Support
Hi all,
I am in very need of your inputs
I have to take a certification among Sales/Pre sales/Support.
For Pre sales we have "BI EE Presales"," Oracle BI Applications" and "Performance Management (PM) Apps Presales Champion " options. All these options are also avaliable for Sales with Presales being replaced by Sales in the course name. For Support "General Support Consultant " and "Hyperion Support Consultant " are avaialble. Could anyone of you pls pls throw some light on what exactly does the Pre sales/Sales/Support mean in this context? I need your response very badly.
Thanks in advance.
Edited by: user10682075 on May 14, 2009 3:57 AMYuo haven't given us a link to see what actually the titles are? A snippet picked can have a very different meaning when combined with the entire thing. Are these courses offered from Oracle? I guess Sales and Support should be clear. Pre Sales , AFAIK , are the guys whose job is to go and "break the ice" before the actual sales people can go and fix the deal while negotiating the price. Pre sales guys are sent to go and tell/show why one should buy the product that they are trying to sell throwing away the product that they are already using. So their job is not jst to go and say, hey use oracle , its damn good but to go and show, hey you are using XYZ dabatabase, let me tell you why Oracle db is better than this technically! So the presales guys are highly technical guys , yet they work as a sales team/guys.
Hope that would make some things clear. If it didn't, as I mentioned , post the link page where these titles are mentioned. May be looking at that someone would be ableto give a better answser.
HTH
Aman.... -
Bangalore, India - Printer after sales support is non existent
This is a rant about terrible after sales support in Bangalore, India from your authorized reseller.
We purchased a new photosmart plus recently after the older HP laserjet 3055 conked out. The older printer was to be repaired while we also agreed to purchase a new photosmart plus.
Its been a month since the laserjet was taken away for a suspected motherboard failure - we havent received it back yet.
And the photosmart plus: we've been facing repeated cartridge changes. The black ink cartridge is either unavailable or the service center is just lax in following up on our requests.
This forum post is just the culmination of a week full of calls and threats to the reseller - systech to send us cartridges and return the older laserjet.
At the moment - we've stopped all printing (4 days now) and terribly harried!Click the "contact support" link toward the lower-left of that page and follow the instructions.
Regards. -
Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?
Prime Infrastructure/ Assurance is positioned today more towards managing network elements and network performance, rather than server infrastructure. We are in the process of adding Datacenter component support, with more focus on Nexus and UCS- due later this year.
Having said that, Prime Infrastructure allows the system user to add custom SNMP polling templates, which can then be used for polling any SNMP based values from any SNMP enabled device. These can be used to collect the information you specified below and the polled information will be available in dashboards and reports. -
SAP Best Practices for Sales Support(CAS)
Hi,
Pl provide me the SAP Best Practices for Sales Support(CAS).
Regards
RaviDear Ravi
Please check these links
[Sales Support: Computer-Aided Selling |http://help.sap.com/saphelp_40b/helpdata/en/10/748534c4603c34e10000009b38f83b/frameset.htm]
[Sales Support : Computer Aided Selling|http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/SDCAS/SDCAS.pdf]
thanks
G. Lakshmipathi -
Wlan doesn't support monitor mode
Hi everybody,
I'm new in the Arch's world and today I installed Arch on my MacBookAir 4.2 and I installed wifite but when I try to change the wl in "monitor mode" the wl crashes and I must restart the wl.
This is a my pc info with this commands:
uname -a
lspci -nnk | grep -iA2 net
lsusb
iwconfig
rfkill list all
lsmod
Linux Arch-MacOSX 4.0.4-1-ARCH #1 SMP PREEMPT Mon May 18 06:43:19 CEST 2015 x86_64 GNU/Linux
02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
Subsystem: Apple Inc. AirPort Extreme [106b:00e9]
Kernel driver in use: wl
Bus 002 Device 003: ID 05ac:8404 Apple, Inc. Internal Memory Card Reader
Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp. 2.0 Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05ac:850a Apple, Inc. FaceTime Camera
Bus 001 Device 005: ID 05ac:024d Apple, Inc. Internal Keyboard/Trackpad (MacBook Air) (ISO)
Bus 001 Device 008: ID 05ac:821f Apple, Inc. Built-in Bluetooth 2.0+EDR HCI
Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp. 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
wlp2s0 IEEE 802.11abg ESSID:"cvsg1"
Mode:Managed Frequency:2.452 GHz Access Point: 64:66:B3:2D:FF:BD
Bit Rate=52 Mb/s Tx-Power=200 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=33/70 Signal level=-77 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Module Size Used by
nls_utf8 16384 0
ntfs 204800 0
ppp_deflate 16384 0
bsd_comp 16384 0
ppp_async 20480 1
crc_ccitt 16384 1 ppp_async
l2tp_ppp 24576 0
l2tp_netlink 20480 1 l2tp_ppp
l2tp_core 32768 2 l2tp_ppp,l2tp_netlink
ip6_udp_tunnel 16384 1 l2tp_core
udp_tunnel 16384 1 l2tp_core
pppoe 20480 0
pppox 16384 2 l2tp_ppp,pppoe
ppp_generic 32768 10 l2tp_ppp,pppoe,pppox,bsd_comp,ppp_async,ppp_deflate
slhc 20480 1 ppp_generic
btusb 40960 0
bluetooth 442368 2 btusb
hid_generic 16384 0
wl 6303744 0
coretemp 16384 0
intel_rapl 20480 0
hid_apple 16384 0
iosf_mbi 16384 1 intel_rapl
x86_pkg_temp_thermal 16384 0
intel_powerclamp 20480 0
joydev 20480 0
kvm_intel 155648 0
mousedev 20480 0
kvm 446464 1 kvm_intel
crct10dif_pclmul 16384 0
nls_iso8859_1 16384 1
crc32_pclmul 16384 0
nls_cp437 20480 1
crc32c_intel 24576 0
i915 1024000 8
vfat 24576 1
fat 65536 1 vfat
ghash_clmulni_intel 16384 0
uvcvideo 86016 0
usbhid 49152 0
snd_hda_codec_hdmi 53248 1
hid 110592 3 hid_generic,usbhid,hid_apple
bcm5974 20480 0
applesmc 20480 0
mac_hid 16384 0
iTCO_wdt 16384 0
evdev 24576 13
snd_hda_codec_cirrus 20480 1
iTCO_vendor_support 16384 1 iTCO_wdt
videobuf2_vmalloc 16384 1 uvcvideo
led_class 16384 1 applesmc
aesni_intel 172032 0
snd_hda_codec_generic 65536 1 snd_hda_codec_cirrus
drm_kms_helper 102400 1 i915
input_polldev 16384 1 applesmc
cfg80211 483328 1 wl
aes_x86_64 20480 1 aesni_intel
hwmon 16384 2 applesmc,coretemp
videobuf2_memops 16384 1 videobuf2_vmalloc
lrw 16384 1 aesni_intel
gf128mul 16384 1 lrw
glue_helper 16384 1 aesni_intel
ablk_helper 16384 1 aesni_intel
cryptd 20480 3 ghash_clmulni_intel,aesni_intel,ablk_helper
videobuf2_core 40960 1 uvcvideo
pcspkr 16384 0
snd_hda_intel 28672 3
v4l2_common 16384 1 videobuf2_core
i2c_i801 20480 0
snd_hda_controller 28672 1 snd_hda_intel
snd_hda_codec 114688 5 snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller,snd_hda_codec_cirrus
videodev 135168 3 uvcvideo,v4l2_common,videobuf2_core
uas 24576 0
media 20480 2 uvcvideo,videodev
sbs 16384 0
snd_hwdep 16384 1 snd_hda_codec
usb_storage 61440 1 uas
rfkill 24576 3 cfg80211,bluetooth
drm 282624 10 i915,drm_kms_helper
sbshc 16384 1 sbs
apple_bl 16384 0
ac 16384 0
snd_pcm 90112 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
video 24576 1 i915
battery 20480 0
snd_timer 28672 1 snd_pcm
mei_me 20480 0
button 16384 1 i915
shpchp 36864 0
mei 77824 1 mei_me
intel_gtt 20480 1 i915
snd 69632 14 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
i2c_algo_bit 16384 1 i915
lpc_ich 24576 0
i2c_core 53248 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
soundcore 16384 2 snd,snd_hda_codec
processor 28672 0
sch_fq_codel 20480 3
ext4 512000 3
crc16 16384 2 ext4,bluetooth
mbcache 20480 1 ext4
jbd2 90112 1 ext4
sd_mod 36864 5
ahci 36864 4
libahci 28672 1 ahci
libata 184320 2 ahci,libahci
scsi_mod 147456 4 uas,usb_storage,libata,sd_mod
uhci_hcd 45056 0
ehci_pci 16384 0
ehci_hcd 73728 1 ehci_pci
usbcore 200704 9 uas,btusb,uhci_hcd,uvcvideo,usb_storage,ehci_hcd,ehci_pci,usbhid,bcm5974
usb_common 16384 1 usbcore
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
How I can use the monitor mode for use wifite?
Thanks for any answer!!!
Last edited by skioda86 (2015-05-22 10:00:45)As far as i know the wl (proprietary broadcom driver) doesn't support monitor/injection.
But the Mac80211 alternatives might. If they support the wifi chip in your MacBook.
From experience with a friends MBP it didn't yet support his broadcom so had to use WL to get basic network connectivity and used an Dual-band(2.4Ghz/5Ghz) 2x2 11n/ac USB dongle for his monitor/injection needs. -
Does Apple support monitor these boards ????
Was wondering, Does Apple support monitor these boards?? If so, Do they ever offer any helpful, practical, and latest software solutions??
Seems alot of us are having wifi, bt problems; can they offer some new solutions other then those offered through support bulletins several months old that dont seem to apply to this newest upgrade?????Hi,
You will notice that this Article is dated 20th November 2008
http://support.apple.com/kb/TS1643
Despite it pointing out Netgear Routers only, you will see from this Thread that the Issue was being discussed here much earlier than that
http://discussions.apple.com/thread.jspa?messageID=1020028󹁼 Dated 24th Aug 2005
An Aside
I have been running my website since 2004 and iChat 2
This section originally dated 2005 as well also has the info
http://www.ralphjohns.co.uk/page4.html#_mactodo (Item 4)
It is not so much about what Apple do right away or answer in the Discussions it is about what they do to get the info to a wide an audience as possible.
The upshot is that they do Monitor the Discussion in various forms.
Some info finds it's way in to Articles like the first link.
Other things get tested for future releases of the OS that Developers and others can try out.
The issue with that is that whoever is doing the testing concentrates on the bits they want to work and know how it works before any changes.
There are of course other examples dotted about.
9:10 PM Thursday; April 8, 2010 -
MacBook Pro mid-2010 15-inch Supports Monitor at 720p but not 1080p
Hello all,
Systems Specs:
MacBook Pro (15-inch, Mid 2010)
Processor: 2.53 GHz Intel Core i5
Memory: 4 GB 1067 MHz DDR3
Startup Disk: Macintosh HD
Graphics: NVIDIA GeForce GT 330M 256 MB
I am attempting to connect my MBP to a new Asus VE278Q, 27inch 1920x1080. I use a mini-display port to HDMI monoprice cable. I can connect at 720p and the display looks fine. When I switch to 1080p the monitor flickers and turns to snow within a few seconds. My parents' 2013 MBP, using the same cable, can connect to the monitor and display perfectly.
The technical specs for a mid-2010 MBP say that it can support "up to 2560 by 1600 pixels on an external display." It should be able to support this monitor easily. I have also tried to connect it to a Sony 1080p TV, where it registered as black screen.
Does anyone have any idea what is going on? Is there something wrong with my graphics card?Hi stan,
Read about it here:
http://support.apple.com/kb/TS4088
Maybe you are looking for
-
Material Cost is not coming in Credit Memo
Dear SAP gurus, My Client is from Brazil & they created a cycle of Sales Order (Export Order) to Billing (with Nota Fiscal) & with Reference to Invoice, they created the Return Order, Return Delivery (PGR) & finally generated Credit Memo. The Problem
-
Cannot automatically connect to wi-fi after restart
Hi all, I just set up my E1200 router to my PC running Windows 7 and it works perfectly in my house, except that after I restart or power off my computer, I have to manually reconnect to my wi-fi network everytime and re-enter my password. The check
-
Opening .CR2 files in CS5 Photoshop from Canon T4i.
Mac OS 10.6.8. Photoshop CS5.1 V12.1 x64. I am trying to open and edit RAW images shot on my new Canon T41 Rebel. Will not open. Tried to convert using Adobe DNG Convertor. Did not work. Is there a way without upgrading to CS6?
-
Transferring Open Items, Instalment Plans and Dunning Level
Hi all, We are implementing SAP IS-U for a water suplly company and we have a process in which an Installation is transferred from a Business Partner to another. For this we are using the Move-in / Move-Out functionality (trx EC60). So far, so good.
-
Cure for Logic/Cre8 users with sync probs!
i Peeps, I bought Cre8 last weekend & got the dreaded L8 sync issues with Logic Pro 7.2.1 when used via Melodynebridge. 3.0.1.5 (I'm currently having issues with 3.1.0.9 knocking out my Reason L/R input) Having read a little further regarding being V