VC/2 not showing blocked deliverys in ECC6.0

Dear All Gurus,
Case Described as below
In Transaction VC/2 Program (GUI) RVKUSTA1 ECC6.0
VC/2 Sales Summary report do not showing blocked deliverys or blocked billing documents.
Excuting VKM1 (Blocked Sd document) for the same customer, I can find the blocked sales doc numbers.
Could anyone please help me to resolve this issue.
Thank you in advance.
Vinayak
Edited by: Vinayak D on Jan 9, 2009 6:14 PM

Dear,
Thank You for the reply.
In VC/2 there is Quick Info Details, where there are below two details displayed,
Orders blocked for delivery       0
Orders blocked for billing          0
When I excute VKM1 for the same customer, I get display of the blocked Sales Order.
In VC/2, do not get the number of blocked doc displayed in Quick info,
Need some reason why it is not getting displayed?
What are these details available for ?
BR,
Vinayak

Similar Messages

  • GTS Block when running SPL Address simualtion does not show blocked

    When running a GTS SPL Screening for general address, transaction /SAPSLL/SPL_CHSS3; the simulation does not show a block for Transavia; however if I change the name to Transavia Network it will block.  I need this to block on the name Transavia.  I have changed my fuzzy logic in SPRO > IMG>SAP Global Trade Service>SAP Compliance Management>Sanctioned Party List Screening Service>Define Control Procedure for Address Comparison
    In Detail Control in Keyword generated from name I have the follwoing settings:
    Comaprison Procedure SPLUS
    Search Term Origin Keyword generated from name
    Check Object is selcted
    0 Linking Operator Logical OR (at least one OR operation Satisfied)
    B Relational Operator Comparison Index and Keyword from address are identical
    In Minimial Similarity I have the follwoing settings:
    Search Term 72%
    2 Search Term Origin Basis for Comparion Parallel from Sanct Party List/Address
    Originating Feature 49%
    2 Basic Val No Terms Number of Terms in Each SP List or Partner Name
    Allow Multiple Matches for Origin is NOT check
    Edited by: Kim Blair on Jan 13, 2012 3:06 PM

    Hello Jasmit and Vishal
    Sorry it has taken me a long time to repsond and this is still an issue.  I have been bogged down with other things that has consumed my time.
    I have tried to reset the buffer but to no avail.  No we are not suing TREX.  We are currently on GTS 7.2. but soon to upgrade to GTS10...This is really a strange issue...I can do a check on the name David and it will block...that is a shorter name than Transavia....so I am really confused by this...again Transavia Network will block...same country...
    Any guidance on this is really appreciated. 

  • Mr11 not showing Purchasing Document

    I have a scenario where the purchasing document is not being shown in MR11. The GL view that is FAGLL03 shows this particular document but this is not revealed while mataining GR/IR account in MR11. This document is also shown after running MB5S that is list of GR/IR balances. Can anyone let me know the reasons of this not being shown in MR11.

    Hi
    Check if those PO are blocked for any reason. If yes, you may choose to release them. As far as I understand MR11 does not show blocked PO Line Items and PO
    Regards
    Sanil Bhandari

  • Transaction MD04 does not show all open sales/orders deliverys

    Hi,
    Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
    Can anyone tell me the reason for this?
    Regards,
    Brijesh

    Hi
    Run SDRQCR21 report in Transaction SE38 for that material it will  resolve your issue.
    Please confirm
    Amit

  • I am recieving calls from a solicitor. Show up as no caller Id. I want to block all calls that do not show caller Id. Can I do that? I am on the do not call list

    How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the national do not call list but that's no help. Because the caller id doesn't show anything I can't even report them.
    I remember in the past calling a number and before my call would go thru I would have to enter my phone number so the party I was calling knew who was calling them. That is what I want to do. I want to block all calls from "no caller id" "number unavailable" Just FYI my phone is an IPHONE 5 and I am on Verizon.
    Any help would be appreciated.
    Thanks

        itbitybob, good day!
    Thank you for taking the time to reach out to us today. I know how frustrating it can be getting phone calls from "no caller id" numbers. We do have an option that is called Family Base that will allow you to block unknown numbers, private numbers, or caller id. This link will provide you with the full details of this option. http://vz.to/1gIklla I hope this is able to answer your question. If you have further questions please feel free to reach back out to us at any time.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport 

  • Sales order blocked for delivery but not showing in VA14L

    A Sales order is in delivery block and its not showing in VA14l Delivery block .
    Please help.
    Regards..
    Bhyrav

    Hi,
    Transaction VA14L report displays sales orders with header level delivery blocks & credit blocks.
    If the delivery block in sales order item level the VA14L will not display those orders.
    You may try V.14 transaction but it will not display sales orders with credit related delivery blocks.
    Otherwise, provide more inputs so that it would be easy to analyse the issue.
    Regards
    Suresh.

  • Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

    Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

  • Firefox does not shows on top when it blocks popup

    Earlier when Firefox used to block any popup it showed notification at the top that Firefox has blocked popup and i can select to open the popup from option.But now it does not show any notification at top when it block's popup.How can i enable the notification again?

    Hi anil02,
    The notification may have checked "Never show this again. Some more information on this can be found:
    *[[Pop-up blocker settings, exceptions and troubleshooting]] "
    It is also possible to check the exception list from the Firefox Menu > Options > Content > Exceptions to manage the pop up list.

  • Thunderbird does not show a blocked remote content notification bar when content is blocked even when Allow remote content is not clicked

    Thunderbird does not show a blocked remote content notification bar when content is blocked to allow remote content. The allow remote content box is not enabled in the privacy settings.

    Is it always like that? or just from one source?
    How are you viewing emails ?
    (view / Message Body As) should be ''original html ''

  • Blocked thread with no events does not show up in Flight Recording

    When there is no event in a thread and the thread is blocked during the entire duration of a flight recording, the thread does not show up in the flight recording. How to check the state of such a thread from the flight recording?

    Hi,
    I am not sure I understand the question correctly, but events (like Java Blocked) are only saved to file when the thread is not longer blocked. So if you have an event that goes on during the whole recording it won't show up. It's a known limitation of flight recorder.
    If you are really desperate to find out the state of the thread you could look at the Method Profiling events that samples the thread.
    1) In the Event Types remove all the events that are checked.
    2) Check the Method Profiling Sample.
    3) Go to Events-> Threads. Select the thread you are interested in
    4) Right click and select Operative Set -> Set Selection
    5) Go to Events -> Log and check Show only Operative Set
    6) Click on an event in the log and look at Event Attributes below. There is a field called Thread State which will tell you the state thread.
    That's the best that you could do.
    Erik

  • I tune is not able to download and show blocked massage

    itune is not able to download and show blocked at apple site

    Well, the reason you can't download from iTunes is precisely because your internet is not working.
    Before we can help you, you'll have to provide more details about your problem and what you've done thus far to troubleshoot.

  • How can I block a number that calls me persistently every single day but only shows 3458  it does not show the full 10 digit

    how can I block a number that calls me persistently every single day but only shows 3458  it does not show the full 10 digit so on your block page will not let me block it!!!  So frustrated and I am not answering it with all the hackers out these days I don't want to give them access to my phone.

        @lottsandy
    I can understand your frustrations and concerns with receiving these unknown calls!  I would love to assist you with preventing these types of calls.
    Sounds as though you're receiving some type of telemarketing call.  Although you're unable to add the shorter numbers to your call block list, you can definitely add your number to the National Do Not Call registry http://1.usa.gov/1whONxp.  I hope this will help prevent those unwanted calls.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Printer does not print the blue ink and clean printheads does not show the blue blocks

    I cleaned my printheads numerous times and ran the printing test but the blue blocks do not show up.  There are no streak lines in any of the other colors. How do I fix this problem?

    Hey there @mvelalis!
    Thank you for posting on the HP Forums!
    I would be happy to provide some assistance regarding the cyan not printing.  If you have already run the printhead cleaning with no success in getting the cyan to print then I suggest removing the printhead from the printer and manually cleaning the copper contacts.  The printer takes 4 print cartridges and 2 printheads.  The printheads need to be replaced like cartridges but not as often.  The printheads are what actually put ink onto the page.
    To manually clean the printheads click: http://support.hp.com/us-en/document/c01609042
    I was also able to locate a document regarding Fixing Print Quality Problems for the HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g....  I suggest going through the documents for possible solutions to your issue!
    Please post back and let me know how it goes!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • How do I turn on the notification for pop-up blocker? I accidentally clicked the option saying "do not show this notification again." I want the notification so I have the option of seeing the pop-up or not, but don't know how to turn this back on.

    How do I turn on the notification for pop-up blocker? I accidentally clicked the option saying "do not show this notification again." I want the notification so I have the option of seeing the pop-up or not, but don't know how to turn this back on.

    Type "about:config" in the location bar.
    Filter for "privacy.popups.showBrowserMessage"
    Change this to true by double clicking the preference (or right click and choose Reset)

  • Account name not showing in 'Partners' Block for sold to party and ship to

    Hi Experts,
    I created a return order by confirming the Account.
    Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
    Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
    Thanks in Advance,
    Kishore

    Hi Experts,
    I created a return order by confirming the Account.
    Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
    Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
    Thanks in Advance,
    Kishore

Maybe you are looking for