VC 7.0 does not recognize Metadata for custom RFC

In SAP R/3 I have created a RFC that has no IMPORT or EXPORT parameters, only TABLES defined as "DATA_OUT". The RFC code finds and generates the values to fill "DATA_OUT".
Tested the RFC in our R/3 System, works fine. Then went to Visual Composer. Data Services does list the new RFC. I click and drag into my iView. The data service appears in my iView. For a split second I see what may be the "retrieving Metadata" popup, but it disappears too quickly, cannot tell what it was. At no time does a "Define Data Service" popup appear that would allow me to select Input or Output choices.
Now the Data Service icon appears in the iView but lists an Input port. It does not show an Output port at all. I expected only an Output port.
SAP Portal Admin can go into System Administration, Portal System Landscape and create an iView using the same SAP RFC. It recognizes the Output metadata. He can run a test of the data service and this RFC provides correct output as expected.
I do not understand why VC is behaving differently than the Portal. Any ideas ?
Regards
MPersson

MPersson,
May be worth to check one thing: you might have this RFC in a previous version without Output. For some how VC composer did not get your last version.
Regards,
Gilson

Similar Messages

I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?

I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?

Contact support if you have serial number issues. Otherwise start by checking this stuff:
Sign in, activation, or connection errors
Mylenium

I changed my apple id email and now my phone does not recognize it for icloud.

I changed my apple id email address and now my iphone 5s does not recognize it for icloud. It keeps asking for the old email address apple id.

Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

Flickr export does not recognize metadata changes

* I did publish some photos to flickr with the flickr publishing service
* Then I edited some metadata (GPS Data)
==> the flickr publisher does not recognize the changes, so the photos are not marked for "republishing"
it seems that the flickr publich services recognizes only changes in "capture" and "title".
that's strange, because if I had to explicitely mark each photo to "republish" I don't need a built-in publishing service

There is not really a need for colormanagent on the web.* You should only use sRGB since:
1. Many web browsers don't even understand profiles other then sRGB, including the most used (unfortunately) web browser: Internet explorer.
2. 99% of people surfing the web don't have calibrated monitors.
*usually, the profiles conversion already happened before the upload, just make sure the version you upload is in sRGB.

Windows does not recognize driver for pci-4461

Hello,I am currently running windows xp with labview 7.0 on my computer. Recently trying purchased and trying to install PCI-4461 Audio Analyzer PC card. I downloaded the latest driver 9.0.2 off the NI website. After the install I verified the driver exist by using the Measurement & Automation tool. However, window does not recognize any driver for the hardware. When I point it to the directory where the driver is "suppose" to exist, windows gives me an error message saying that the driver does not exist or is corrupted. I've tried uninstalling and reinstalling several times. Has anyone ran into this problem and can give me some advise? I know that the version on DAQmx 9.0.2 is not compatible with the version of labView I am running. However it should not affect windows from locating and installing hardware. Thank you,Ruth

Hi Ruth,
Did you install the PCI-4461 card in your computer before or after you installed the DAQmx 9.0.2 drivers? It would be best to install the drivers first and then the card. Windows XP will pop up the New Hardware Wizard, saying it detected new hardware. Click Next, and then to Search for Drivers Automatically. Do not try to navigate and select the appropriate driver folder. As long as the drivers are installed correctly Windows will be able to find the correct driver automatically.
You can also remove the PCI-4461 card and try it in a different PCI slot. This will cause the new hardware wizzard to appear on the next restart.
Eric S.
Eric S.
AE Specialist | Global Support
National Instruments

Canon quick menu software does not recognize scanner for MG5520

Hi,
I have Canon Wireless Inkjet Photo All-In-One printer (MG5520). I have installed Canon complete software. But the quick menu does not recognize my scanner. In Preferences only Printer is listed, but for Scanner nothing is available. Could you please suggest how to get scanner as well for my device?
My OS is Windows 7.
Regards,
Sharath.

Hi sharma_swp,
Reinstalling the drivers for the printer from the Canon USA website should provide the scanning option on the Quick Menu. Please click here to go to the Drivers and Software page for the PIXMA MG5520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file has been downloaded, please double-click on it to reinstall the drivers and software on your computer, then restart your computer. If you still have difficulty with the Quick Menu showing items related to scanning, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Mail does not recognize password for incoming mail

I use mail to retrive messages from two pop accounts a mac account and a work account. But now Mail shows a message saying that the server for my log in name does not recognizes the password. But if I use the webmail of that account it does recognize the password. I am able to sentmail from that account as well as to receive and send from the .mac account. What is the problem?
Thank you very much for any help.

Your email provider is not copmcast, that is your ISP.
You apparently have a comcast account that you access using their web mail. Not really relevant here as we are talking about accounts in mail clients, not browsers.
The settings you have posted are to access your comcast mail account in Thunderbird, something Thunderbird is designed to do. Manage multiple mail accounts.
You indicate that the domain is toteyourself.com this domain is registered with godaddy and I assume uses standard godaddy domain mail settings.
Which are listed on the godaddy site as https://support.godaddy.com/help/article/4714/setting-up-your-email-address-with-imap?countrysite=au
Username
Your full email address
Password
Your email account password
Incoming Mail Server
imap.secureserver.net
Outgoing Mail Server
smtpout.secureserver.net
Incoming Port
Without SSL - 143
With SSL - 993
Outgoing Port
Without SSL - one of the following: 25, 80, 3535
With SSL - 465
Teresa Schlosser is registered as the technical contact for the domain, perhaps you might need to communicate with her. Although the registered address appears to be a residential area, so perhaps that is you.

My iMac does not recognize file for Facebook's new face-to-face calling feature, what's happening?

I want to set up Video calling in Facebook. I get a message that Foxfire does not have application for file and can only save it.

First, update Firefox to 16.0.2. [[Update Firefox to the latest version]]
Then, follow the information at [https://www.facebook.com/videocalling/ https://www.facebook.com/videocalling/]

Just reset my apple ID and password, but iPhone does not recognize it for iCloud or iTunes. Is there a way to be sure these iPhone features use my new Apple ID and password?

Have never been able to use iCloud because my iPhone (v 4) does not recognize my apple ID or password. Any ideas?

If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account. You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

Windows 8 does not recognize drivers for HP Officejet 6500 E709a Series

I have downloaded drivers for windows 8 for my HP Officejet 6500 E709a Series printer, but the windows 8 system does not recognoze them.

Hi,
What is the error message ? Where do you download from ? the following file or a different file ?
http://ftp.hp.com/pub/softlib/software12/COL31304/mp-110035-1/OJ_AIO_6500_E709_Full_Win_WW_140_408.e...
Please download the above file then install again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I pod touch does not recognize USB for play or charging

It does not seem to be discharging but no connection and I have tried different cords

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Firefox 3.6.9 on mac running 10.4.11 does not have option for custom headers when printing.

I am trying to print web content for a college project, it requires custom headers and footers. Firefox 3.6.9 does not have a custom option in the header/footer lists. In the help pages for Firefox is shows this option. Is this missing only on the Mac version? Thanks for any info.

See if this works.
Type '''about:config''' in the URL bar and hit enter.
Filter = '''print.print''' 
There are 6 prefs for headers / footers. 
'''print.print_header...''' center, left, & right 
and 
'''print.print_footer...''' center, left, & right 
You can add what you want in the '''''Value''''' column and then Restart Firefox to effect the change.

Crm pc ui F4 Help does not work properly for custom field

Hi ,
I am having a issue with F4 help. For a custom field I have enabled BP search. The custom field gets populated with selected BP number from the search screen.
Problem is,
Once opportunity is saved, for standard fields BP name gets displayed while for my custom field BP name does not get displayed only BP number stays at the place.
What should be custom field size to accomodate BP selection?
Have anybody done something like assigning BP search with custom field ?
Any Ideas if I am missing something?

Hi Bhatt,
Your problem isnt in the F4 application. The problem is the logic of class corresponding to fieldgroup that your field is contained.
You need a development like standard.
Regards.
Manuel

IPOD does not recognize songs for Music Quiz

I have 1 playlist on my iPOD and for some reason the Music QUIZ cant find these songs. How can this be fixed?

Click here and follow the instructions.
(33182)

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file. What

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file". What do I need to do to open my NEF files?? Thanks.

Thanks for the quick reply, CP
FYI, the file is a photographic panorama based on several .CR2 photos taken in July, 2012 and processed in CS5's camera RAW/Photoshop. Beyond the metadata, here are no fonts or text in the file.
1. I changed Maximize ...File Capability from "Never" to "Always" and the flattened file saved and loaded OK, though I can't figure why given Adobe's description of this option. "If you work with PSD and PSB files in older versions of Photoshop or applications that don’t support layers, you can add a flattened version of the image to the saved file...". The file saved in this manner is ~8% larger and is not my preference as a routine since I've TB's of photo files. By the way, out of thousands of .psd/.psb files, the one being discussed is the first to give me the error.
2. I've tried saving/reloading the file on another computer with Win XP Sp3/CS5...again with Maximize Capability OFF. Same problem. Turn ON Maximize Capability and it works. As with the Win 8 machine, Bridge could neither create a thumbnail or read Metadata.
3. I've purged the Bridge Cache, made sure there were no old PS page files, reset PS preferences, and disabled my 2 plugins with no change in the problem. Windows and Adobe progs are all updated. Saving to a different HDD has no effect.
The problem occurs on 2 computers (Win XP/Win 8), two versioins of Photoshop (CS5/CS6), and "Maximize" On/Off togles the problem. My guess it is a bug in PSD processing routines.
If I can't find a fix, will keep with Maximize ON and deal with the larger files that result...the cost of insurance, I suppose.
Thanks again

VC 7.0 does not recognize Metadata for custom RFC

Similar Messages

Maybe you are looking for