VC Bi Integration wizard -

Dear gurus,
I saw another post which has a similar problem, but unfortunately it didnot answer my question, so i am opening a new one here.
I am trying to create a model for displaying BI data in the portal. I am able to see the queries in VC and even drag and drop them into the storyboard. But when I use the wizard it throws the below error message.
"WARNING 2005: There are no BI systems defined in portal. In order to use BI integration wizard, you must first define at least one BI system based on the BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector"
This is a BI integrated portal and we have no issues with publishing queries and web templates into the portal. They show perfectly as iviews. We have not implemented Single Sign on.
Now when I was looking at the sytems defined in the portal I see the following entries, and they were created / provided by SAP.
BI JDBC System
BI ODBO-Compliant OLAP System
BI SAP Query System
BI XMLA-Compliant OLAP System
EP 5.0 System
HTTP System
JDBC System
SAP system using connection string
SAP system using dedicated application server
SAP system with load balancing
Web Service System using WSDL URL
I am assuming that all these systems were already provided by SAP. Then why is the wizard still throwing the error. Was it configured or initially installed using the wrong system alias?
I have also activated the MDX editor, but that didnot help.
Landscape: EP 7.0 (Netweaver 2004s ), VC version 700.16.0.1
any help is appreciated, useful answers<=>generous points.

Hi,
As Our friend Told it Correct.
the List you showed is the List of Templates with which you can creat the Systesm in the portal.
But if you want to use any BI systesm through BI integration wizard the that BI system should be Configured using the One of the Connectors : BI XMLA ,BI JDBC ,BI ODBO ..etc
So to configure your BI as one of the above types then you will not get the Error you got.
To confiuge the BI system to use in BI wizard ,Please follow the Link
.HeatMaps with a Business Scenario.
in the above link look for the BI JDBC Systesm caretion
Govindu

Similar Messages

Warning when trying to open BI integration wizard

Hi,
when i try to open the BI integration wizard, i get a warning " warning 2003 : zoom to the current diagram to a level of an ivew or source " and then the wizard closes.
Haradev

Hi Haradev,
Open the the 'BI Integration wizard' after drill down a iview. You can use Bi Integration wizard inside an iview. Try this.
Regards
Basheer

Report error with the input form using the VC BI integration wizard

Hello All,
I've created a report using the BI integration wizard in visual composer. I've configured the query with the 'Free Form' query template also I've defined the filters there. This is working fine and giving me the report output. When I deploy this , I could see
a start point for the data service.
But instead of the start point with the default values for the filters , I want to have an input form for the users to enter the field values. I added the input form in place of start point. But it's not working even though it doesn't give any error while deploying this report. It gives the following error when I run this report.
" Data service error occurred,cannot execute OLAP queryCannot get data set: Cannot get data set".
Could anybody help on this.
Thanks
Alok

Hi Sandeep,
I'm already draging it from the query input port. Are you referring a different way? How I could have the input variables in the query which I'm creating using the BI integration wizard. To get this input variable I'm trying to add the input form.
Am I doing anything wrong here ?
Pls help.
Thanks
Alok

BI Integration Wizard in Visual Composer Error

Hi Experts,
I try to run BI run BI Integration Wizard in Visual Composer.
It is displaying me an error
Warning 2005:There are no BI systems defined in portal.In order to use the BI Integration Wizard,You must first define atlease one BI system based on BI Java Connector BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Before i contact my Basis/Portal team i would like to know what does it mean
Could you please update me what does creating a BI system in portal based on BI Java Connector BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Thanks

Hi,
Yes ,Even you have the BI system in portal the Connector for
that sytem is RFC not Other connectors
you can check for the type of connector in the portal click on the system open its properties there you find the Connector type
go for connection properties option.
see for more details.
[https://www.sdn.sap.com/irj/sdn/wiki]
Regards,
Goivndu

BI Integration Wizard not opening

Hi,
I have put the patches on EP7.0 from SP6 to SP10. Now there is a problem I am getting for BI in Visual Composer which is as follows:
After opening the Visual Composer, then I move through menu bar "BI" -> "BI Integration Wizard". Now a pop-up message comes as <b>"WARNING 2003: Zoom the current diagram to the level of an iView or a service"</b> with "OK" button. Now when I click on the button, the pop-up closes. So, I am not able to open BI Integration wizard.
Can someone tell me how I can open the BI Integration Wizard.
Regards
Deep

Hi Deep,
have a look into the WIKI:
<a href="https://wiki.sdn.sap.com/wiki/display/VC/Connectivity">https://wiki.sdn.sap.com/wiki/display/VC/Connectivity</a>
There you find all the informations to setup a BI System.
Best Regards,
Marcel

Warning: Bi Integration Wizard

Hi All,
           I have just started exploring VC. When I click on the BI integration wizard in BI menu i get a pop up window showing warning as:
           "WARNING 2005: There are no BI systems defined in portal. In order to use BI integration wizard, you must first define at least one BI system based on the BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector."
         Beacuse of this I am not able to work with this wizard. In the portal BI system is defined and it also has a system alias. When I click on the find data I am able to see the name of Bi system in the System drop down box.
         Please help me out.
cheers
Jayant

Hi Jayant,
maybe our wiki helps you to find a solution:
<a href="https://wiki.sdn.sap.com/wiki/display/VC/Connectivity">https://wiki.sdn.sap.com/wiki/display/VC/Connectivity</a>
Best Regards,
Marcel

How to use BI Integration Wizard ?

When I click BI Integration Wizard tag,error message is : warning 2003:Zoom the current diagram is to a level of as iview or a service?
what's wrong with it?
Anyone know?
Thanks!

Hi,
the error clearly saying the solution.
if you want to work with BI integration wizard ,creat a model and drag a iview to it them drill down to the iview level then clcik on BI integration wizard then it will work.
reason is why we are using BI integration wizard ? to get the queries from BI right
but to drag the query or BI service to VC design board we should be in Iview level.
hope it helps you
Regards,
Govindu

VC Bi Integration wizard problem

Hello,
Am trying to create a model for displaying BI data in the portal.
We have portal and BI properly connected with logon tickets SSO and are also publishing webtemplates to the portal. But creating BI content using VC seems to involve a BI wizard and opening this gives an error that
"WARNING 2005: There are no BI systems defined in portal. In order to use BI integration wizard, you must first define at least one BI system based on the BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector"
How to fix this issue .
1)why is the system we are currently using (created in portal sys Landscape)for publishing templates not adequate here ?
2)which type of system should be used here ie java/xml/olap etc?
3)Is this the only way to create Bi content in VC for depolying on portal?
Sorry for too many qns ,but would really appreciate some explanation rather than links.
Landscape: Ep 7.0 , VC 7.0
Thank you
Rgds

Hi,
yes this Error is correct.
Beacuse the Bi system you ahd configured through the portal are done with RFC,JDBC connectors.
But to use a BI syetms in BI integration wizard the type of connector s should be BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Solution:
Chnage the type of connector in the portal for the BI sytems to one of the above connector then you are able to see the Systems
See the below link for configuration
http://help.sap.com/saphelp_nw04s/helpdata/en/c2/6ca18a338344c8ae9dae2bb2a407c4/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/a6f6dae3224d50abca99051bb6e2b8/frameset.htm
Govindu

BI integration Wizard

Hi All,
I am new to Visual Composer. I know how to use Bapi and pull data from Backend. i went through sap library documentations.
1. Can anyone explain me why we use Bi integration wizard and why we create a query in it?
Regards,
Divya

Hi,
Visual Composer provides functionality that helps you build business intelligence (BI) queries into your Visual Composer models. With the BI Query Wizard and supporting tools, you can build and configure queries on data services and visualize their results, which you can then display in an iView. This allows you to build applications that display analytical data and perform business analytics.
The BI Query Wizard can create queries upon any data service in your portal system configured to connect via the BI Java Connectors, including OLAP and relational data sources.
Refer the following link
<a href="/people/mario.herger/blog/2006/05/13/adventures-of-our-times-visual-composer-bi-kit">/people/mario.herger/blog/2006/05/13/adventures-of-our-times-visual-composer-bi-kit</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/21/58feb70e884bc68a474429ac26f448/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/21/58feb70e884bc68a474429ac26f448/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/28/f7d2ed35a949778d34e4f27777885c/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/28/f7d2ed35a949778d34e4f27777885c/content.htm</a>
Regards,
Hemalatha

'BI Integration Wizard' in Visual Composer.

Hi Experts
I am new to Visual Composer.
Could you please update me what is the use of 'BI Integration Wizard' in Visual Composer.
Thanks

Hi,
useing BI Intergartion wizrd we are integratng the BI applications in VC.
it means we can develop the all analtyic applications which are using te BI or BW data.
seethe help link
[http://help.sap.com/saphelp_nw04s/helpdata/en/d0/a6f6dae3224d50abca99051bb6e2b8/frameset.htm]
Regards,
Govindu

EIM v4.3(1) - Re-run integration wizard?

Hi all,
Is there a way to re-run the integration wizard? I've missed out some configuration and as a result some of the details were not not populated into CIM.
a) Agent PG not shown in Listener
b) Peripheral and UCCE agent login name not populated in users
c) Peripheral and skill group not populated in user groups
d) MRD and script selector not populated in queues
Other than the integration wizard, is there a manual way to update it?
Thanks!
-JT-

Once you run the Integration wizard it writes to the database and this stops it from running again.
But you can certainly add new skills and agents after the fact, otherwise it would be impossible. I'm not sure about the PG though.
The MRD names must be exactly named as in the Guide, otherwise they don't match what EIM wants to see and you have to change a config file on EIM. Easier to rename them on ICM to the names EIM wants to see.
Regards,
Geoff

Xml error in BI integration wizard with portal

HI :
VC is connected to Bi.when i am using BI INTEGRATION wizard it throws following error. "unable tro executre query. No resulte returned or xml returned in query contains an error. Query is inconsistent."
can somebody help??

Hi Arun
Please look into this link:-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92d80512-0a01-0010-32a3-cd3735bd9275 ---Page 8 says about similar error.
Regards
Navneet

VC and BI Integration Wizard

How to use BI Integration Wizard in vc 7.1 ? because i can not fund "BI Integration Wizard" on menu in vc 7.1 , I use CE development SR5 version .

Hi Andy,
There is need to create the system in the portal to integrate the BI and use in the VC7,1 SR5
Please follow the steps below to create the system..And after creating system, usermapping , testing, you can search your creates system in the BI integration wizard in the VC7.1.
Go to http://help.sap.com/ >> Sap Netweaver tab >> Sap Netweaver CE >> SAP NetWeaver Composition Environment Library (including Enhancement Package 1) >> Administrator's Guide>>Configuration of SAP NetWeaver CE>>Configuration for CE Additional Components>>Configuring Visual Composer to Consume Data Sources>>Maintaining BI Server Connections
Or you can use existing created system with following property need to set
BI/Business Intelligence
BI Directory Provider: yes
BI Master System: no/yes
Please let me know if you have any issue on this.
Thanks points are welcome!
Regards,
Arun

Problem in BI configuration Wizard in Visual composer.

Hi All,
I am trying to create iview in VC, when i am trying to connect to system via BI integration wizard , that wizard is not showing XMLA commections folder in available systems list.
Kindly tell me what to do as soon as possible.
Cheers

Hi sumit,
Can you go ahead and check under XMLA sub-heading in the following link:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/connectivity">visual Composer Wiki - Connectivity</a>
Bye
Ankur
Do reward points for helpful as well as solved answers!!

BI intregration wizard query

Hi,
I want to access BI content.How can i access it?
What is the difference between using a BI integration wizard and searching for the info-cube and using the "Data" task panel and Selecting the BI system and searching for a cube in it?
Is there any difference in both of them? Can any one explain me regarding that?
Regards,
Divya

Hi,
the BI integration is a generic term in Visual Composer; it allows you to integrate various kind of BI "like" data sources, among others:
- ABAP Queries
- SAP BI Queries
- Relational databases tables (JDBC)
In order to access SAP BI content, you need to define an SAP BI query (or query view).
Once this is done, you can access it directly in VC by choosing your SAP BI server as data source.
The BI integration wizard is used for creating queries over JDBC tables, allowing you to access BI "like" (but not specifically SAP BI) content.
Rgds,
Karim

VC Bi Integration wizard -

Similar Messages

Maybe you are looking for