VC - new characteristic does not show in PS BOM explosion / CU50

Hello World,
we added a new Characteristic to a class that is basis for a Material BOM explosion. In transaction CU50, the new characteristic can be configured by selecting its single values and the result shows up correctly in the BOM explosion.
Unfortunately, it is does not show up in the BOM explosion result of the SAP PS module @ Network Activity where the explosion is done concerning to our biz process. All other characteristics explode properly in the PS BOM explosion. I have no clue about the difference of the newly added characteristic is that makes it behave differently (only) in the PS system, not showing up in the result.
In CU50 @ Menu Extras @ Result I found a trace of the difference, but cannot interpret it due to a lack of documentation of the resulting screen that is entitled "Configuration : Result". Here, in table "Detail List", only the faulty new characteristics show additional extra Dependency entries with a light green background that cannot be found with all other characteristics in the same table. These extra entries can be drilled down by double-click and produce a pop-up window that shows some status information and the dependencies source code.
Question: what do the extra entries of dependencies say, why are they shown and why not at other characteristics?
By understanding this difference I hope to find the reason why these characteristics are not exploded in the PS module (which is my primary question).
Thank you for a helpful answer!
Marcus

Hi Jong - Moon cho,
Please check following setting,
1.Consider setting the Individual/Collective indicator to 2. (MRP 4 view)
2.In order to get dependent requirements from the planning of configurable materials, components should not be configured with strategy group 70 or 59.
Also refer the bellow link
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
Regards
Girish

Similar Messages

I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

New 4S does not show waiting voice mails? How do I fix?

New 4S does not show waiting voice mails? How do I fix?

What do you mean by waiting voicemails? It tells you a number that includes missing calls new calls voicemail too. If its red circle under messages or the phone it means something is new.

New iphone5 does not show personal hotspot, how do I set it up?

New iphone5 does not show personal hotspot, how do I set it up?

First, your carrier must support Personal Hotspot, and second, your account must be provisioned for such. Otherwise, that setting will not appear. So, contact your carrier.

TS2972 my new computer does not show shared from my old computer. how long does this take??

My new computer does not show share from my old computer how long does this take?

I'm having the same problem. I have my main Library on a WXP machine and a new W7 laptop. My iphone 4 sees the library from the W7 machine, but neither the laptop nor the iphone see the big library on the WXP machine. I have configured firewall settings, tried the network wired and wireless, using same apple id on all devices, restarted itunes on all computers, turned sharing off and on on all computers. Nothing works.

New page does not show up

Hello: I have a web site hosted on Mobile Me. Tonight I added a new page to it. I placed the new page as the first page. I saved the site and published it, but the new page does not show up on the internet. Using the Inspector, i "included the page in the navigation menu," although i do not have the navigation menu displayed. Even with this step, the new page is not visible on the website on the internet. I cannot figure out what else to try. I have hit "publish entire site" and that did not make any difference.
any advice would be much appreciated
Thank you.

Some hosting services are more problematic than others and it's difficult to choose.
I use Host Excellence because they have all the features you need and really good 24/7 tech support - better than GoDaddy.
The ultimate business account gives you way more than MobileMe for about the same price....
http://www.iwebforbusiness.com/Tools-Resources/Website-Hosting.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

TS3697 My new iTunes does not show me a PHOTOS tab when syncing my iPad 3. It only shows Music, Films and Apps tabs on the top left menu.

My new iTunes does not show me a PHOTOS tab when syncing my iPad 3. It only shows Music, Films and Apps tabs on the top left menu.
What am I going to do?

The Photos tab doesn't appear there. If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos e.g. :
If you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

I have purchased a new laptop and my purchases made from new laptop does not show on my account here ... how do I fix it?

I have purchased a new laptop and my purchases made from new laptop does not show on my account here ... how do I fix it? My old laptop is on windows 7 and my new onw is windows 8

Copy everything from your old computer to your new one

I have just bought an iPod Nano to replace my previous one which died,when I open my iTunes it does not show the new iPod, and refuses to allow me to sync my existing library, the new iPod does not show in my computer only on devices, any suggestions ?

Question: I have just bought an iPod Nano to replace my previous one which "died" My computer does not recognize the new iPod and only shows it in devices and printers. I cannot sync my existing iTunes to the new iPod, there is no way I can do it. Any help please?

Hey there longislandmacca,
It sounds like your iPod is not recognized in either Explorer, or in iTunes on your PC. That can be frustrating, expecially when its a new device. I recommend you use the following article to help resolve that issue named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thank you for using Apple Support Communities.
Cheers,
Sterling

New camera does not show as a disc on desktop like my old camera???

Just wondering if this is a camera issue or an iPhoto issue. I just bought a Canon SD400 and when I hook it up, it goes through the norm...it launches iPhoto then waits for me to click import. It does not, however, show as a drive on the desktop...or show on the desktop at all for that matter. With my old camera, I could use the iPhoto option, or I could just go to the desktop and open it as though it were a drive or a disc..that way, I could just grab photos real quick and put them in a folder. It was perfect for photos that I only needed temporarily or didn't necessarily want in my iPhoto library. Any clues why this has stopped with the new camera? The old one, where it did work, was a Fuji Finepix 3800: http://www.fujifilm.com/JSP/fuji/epartners/ServiceSupportProduct.jsp?prodcat=499 950
and, as mentioned, the new one is the Canon Powershot SD400. Help please...I really liked the convenience of having the camera show up as a drive for quick, no frills downloading of photos. Thanks in advance.

Different camera, different mass-media drivers. Your camera model probably will never show up as a mountable disk on the desktop. For the ability to remove only selected photos from the camera, launch the Image Capture application. In Image Capture preferences, remove iPhoto as the target application that opens when your camera is connected. Choose Image Capture to open, instead.
Once you've downloaded your photos to a folder with Image Capture, you can subsequently use iPhoto to import whatever images you want included in your iPhoto collection.

My new ipad2 does not show any apps

I have turned my new ipad2 on, downloaded itunes, clicked on WiFi, but I get nothing except a diagram showing the itune connection. What am I doing wrong?

You really didn't tell us what you did, but it appears you did not connect your iPad to your computer via the supplied USB cable. If you have the latest version of iTunes, once connected, iTunes walks you through the necessary steps to activate your iPad.

New verison does not show enhansed podcast pictures

Please help! I downloaded the latest version of iTunes and now my podcast inhanced one that show its pictures! What is going on here? can anybody help?

This is Apple's support article and it may be of some help.
iOS: Device not recognized in iTunes for Windows
When this happens to me - and it does with more frequency than it should - I quit iTunes, restart or reboot the iPad and restart my Mac. Sometimes I have to do it a couple or a few times, but eventually it works.
I am finding the latest version of iTunes to be one of the flakiest versions in a while. This version just doesn't want to play nice with my new iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

New music does not show up on ipod !

HELP! I have had my nano for a year or so and now when I buy new music it shows up on my pc and appears to transfer to my ipod. But when I disconnect the ipod the music is not there!
PLEASE HELP!!!!!

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

Luactivate 'succeeds' but then new BE does not show up in GRUB menu

Hi,
I'm trying to do a live upgrade from S10 u6 to u7.
The machine is a Sun v20z (which is an x64 box).
The only file system is ZFS, which consists of two drives that forming one pool, "rpool".
I use the Service Processor/LOM over SSH to monitor the status of the console and GRUB menu.
I did everything as directed and everything seemed to check out OK, but no matter what, the new BE never shows up on the GRUB menu! It's driving me nuts! PLEASE HELP!
lola@sol10box:~$ sudo lucreate -n s10_u7
lola@sol10box:~$ sudo pkgadd -d /mnt/Solaris_10/Product SUNWluu SUNWlur
lola@sol10box:~$ sudo lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
s10x_u6wos_07b             yes      yes    yes       no     -
s10_u7                     yes      no     no        yes    -
lola@sol10box:~$ sudo luupgrade -u -n s10_u7 -s /mnt
System has findroot enabled GRUB
No entry for BE <s10_u7> in GRUB menu
Copying failsafe kernel from media.
Uncompressing miniroot
Creating miniroot device
miniroot filesystem is <ufs>
Mounting miniroot at </mnt/Solaris_10/Tools/Boot>
Validating the contents of the media </mnt>.
The media is a standard Solaris media.
The media contains an operating system upgrade image.
The media contains <Solaris> version <10>.
Constructing upgrade profile to use.
Locating the operating system upgrade program.
Checking for existence of previously scheduled Live Upgrade requests.
Creating upgrade profile for BE <s10_u7>.
Checking for GRUB menu on ABE <s10_u7>.
Saving GRUB menu on ABE <s10_u7>.
Checking for x86 boot partition on ABE.
Determining packages to install or upgrade for BE <s10_u7>.
Performing the operating system upgrade of the BE <s10_u7>.
CAUTION: Interrupting this process may leave the boot environment unstable
or unbootable.
Upgrading Solaris: 100% completed
Installation of the packages from this media is complete.
Restoring GRUB menu on ABE <s10_u7>.
Updating package information on boot environment <s10_u7>.
Package information successfully updated on boot environment <s10_u7>.
Adding operating system patches to the BE <s10_u7>.
The operating system patch installation is complete.
ABE boot partition backing deleted.
PBE GRUB has no capability information.
PBE GRUB has no versioning information.
ABE GRUB is newer than PBE GRUB. Updating GRUB.
GRUB update was successfull.
Configuring failsafe for system.
Failsafe configuration is complete.
INFORMATION: The file </var/sadm/system/logs/upgrade_log> on boot
environment <s10_u7> contains a log of the upgrade operation.
INFORMATION: The file </var/sadm/system/data/upgrade_cleanup> on boot
environment <s10_u7> contains a log of cleanup operations required.
INFORMATION: Review the files listed above. Remember that all of the files
are located on boot environment <s10_u7>. Before you activate boot
environment <s10_u7>, determine if any additional system maintenance is
required or if additional media of the software distribution must be
installed.
The Solaris upgrade of the boot environment <s10_u7> is complete.
Installing failsafe
Failsafe install is complete.
lola@sol10box:~$
root@sol10box:/# luactivate s10_u7
System has findroot enabled GRUB
Generating boot-sign, partition and slice information for PBE <s10x_u6wos_07b>
Saving existing file </etc/bootsign> in top level dataset for BE <s10x_u6wos_07b> as <mount-point>//etc/bootsign.prev.
A Live Upgrade Sync operation will be performed on startup of boot environment <s10_u7>.
Setting failsafe console to <ttya>.
Generating boot-sign for ABE <s10_u7>
Saving existing file </etc/bootsign> in top level dataset for BE <s10_u7> as <mount-point>//etc/bootsign.prev.
Generating partition and slice information for ABE <s10_u7>
Copied boot menu from top level dataset.
Generating multiboot menu entries for PBE.
Generating multiboot menu entries for ABE.
Disabling splashimage
No more bootadm entries. Deletion of bootadm entries is complete.
GRUB menu default setting is unaffected
Done eliding bootadm entries.
The target boot environment has been activated. It will be used when you
reboot. NOTE: You MUST NOT USE the reboot, halt, or uadmin commands. You
MUST USE either the init or the shutdown command when you reboot. If you
do not use either init or shutdown, the system will not boot using the
target BE.
In case of a failure while booting to the target BE, the following process
needs to be followed to fallback to the currently working boot environment:
1. Boot from Solaris failsafe or boot in single user mode from the Solaris
Install CD or Network.
2. Mount the Parent boot environment root slice to some directory (like
/mnt). You can use the following command to mount:
     mount -Fzfs /dev/dsk/c1t0d0s0 /mnt
3. Run <luactivate> utility with out any arguments from the Parent boot
environment root slice, as shown below:
     /mnt/sbin/luactivate
4. luactivate, activates the previous working boot environment and
indicates the result.
5. Exit Single User mode and reboot the machine.
Modifying boot archive service
Propagating findroot GRUB for menu conversion.
File </etc/lu/installgrub.findroot> propagation successful
File </etc/lu/stage1.findroot> propagation successful
File </etc/lu/stage2.findroot> propagation successful
File </etc/lu/GRUB_capability> propagation successful
Deleting stale GRUB loader from all BEs.
File </etc/lu/installgrub.latest> deletion successful
File </etc/lu/stage1.latest> deletion successful
File </etc/lu/stage2.latest> deletion successful
Activation of boot environment <s10_u7> successful.
root@sol10box:/#
lola@sol10box:~$ sudo lustatus
Password:
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
s10x_u6wos_07b             yes      yes    yes       no     -
s10_u7                     yes      no     no        yes    -
lola@sol10box:~$
lola@sol10box:~$ sudo init 0
    GNU GRUB version 0.95 (616K lower / 4127168K upper memory)
+-------------------------------------------------------------------------+
| Solaris 10 10/08 s10x_u6wos_07b X86                                     |
| Solaris failsafe                                                        |
|                                                                         |

What happens when you create a new BE using the current BE without any changes (just making a bootable copy of the current BE)? What is the results of cat /rpool/boot/grub/menu.lst? If you do a lufslist bootenvname, do all of the indicated filesystems actually exist?

New Playbook does not show my apps in Appworld

Hi All,
Yesterday I had to exchange my Playbook (it had a corner of the screen that was darker than the rest - a story for another thread). I got my new Playbook and it all appears to be working fine. I have registered it to my existing Blackberry ID, but for some reason Appworld on the Playbook refuses to show any of my Apps, either from my Blackberry Bold, or Apps that I downloaded to the old Playbook before exchanging it.
I did a Wipe of the old Playbook prior to exchanging, so I cannot see any reason why Appworld will not allow me to see any apps on the new one.
Can anyone help here?
Thanks,
Neil

You have probably tried to reboot the PB so I won't mention it You may have to contact customer support and hope for some help from them. Are the PB apps listed in the unavailable section of My World on your 9700?
In the dark and need a sky map?
Discover What's up at App World.
Follow What's up on Facebook

VC - new characteristic does not show in PS BOM explosion / CU50

Similar Messages

Maybe you are looking for