VC using BW3.0 via XMLA and Multicube

Hi,
i have connected a BW3.0 to Visual Composer (7.0) by using xmla connector. The connection works fine and i can create a query in BI integration wizard. But i get an error message when i want to use a multiprovider:"Error - 11021 Cannot create the OLAP data service. Cannot add OLAP data service to iview" Does VC support multicubes on BW3.0? If, yes, do you know this error message?
Best regards
Daniel

the multicubes are supported by xmla. several reasons can cause this error:
connection timed out because server compiling or large resultset;
mandatory variable defined;
use transaction mdxtest to run a sample mdx against this multicube. if successful, run the same mdx with VC MDX Editor. that should give you an idea where could be wrong.

Similar Messages

How do I use my internet via airport and my printers in windowsXP.

Boot Camp works well but Now in widows I can not connect to the internet using my already established wireless internet. My printers are set up via airport as well and I can't get that to work. The windows recognizes there is a signal to use and it shows the signal is excellent but I cannot conect to it???
Please email me some answers.
iMac Intel Core Duo Mac OS X (10.4.6)

Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
iFelix

Printer used to work via airport and now it doesn't

Hi there -
I have an imac and a macbook on 10.4.11. Recently I had to upgrade my AT&T modem because they said it was outdated. After installation of the modem, I can no longer get my HP 3310 to print.
I've tried re-setting up the printer via its Wireless Setup Wizard. I then tried to get the imac to recognize it but it will not. I then went on line and after uninstalling the old HP driver, installed
a new one and that didn't work either. On the macbook where no prefs were changed, the HP 3310 shows up in the printer window but when I try to print it just chugs away and eventually says, "printer stopped".
I've trashed the HP prefs in the library and restarted the imac to no avail as well. Does anyone
know what would cause this to happen once a new modem is installed? I'm assuming it's modem related but have no idea how to fix it. In addition, AT&T says since it's not the printer and airport are not their equipment, they can't help me.
ANY ideas would be greatly appreciated. Thanks!

Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
Then try to set up an IP printer in Printer Setup Utility, there should be an hp IP printing choice.

Real time data monitoring using multiple thermocouples via indicators and waveform

I apologize in advanced for this question is probably somewhat simple but I am brand new to labview as well as to the forum and could use some pointers. I have a CompaqDAQ with two 9213 16 channel modules and I am trying to read in 30 thermocouples into a waveform as well as display 30 indicators so I can label each indicator with the corresponding thermocouple for real time monitoring. Each thermocouple corresponds to a specific location and it is critical that the interface have an accurate indication or label for each one. I am wondering if there is an easy way to do this besides splitting the signal and having 30 thermometers on my block diagram? Perhaps an array of some sort? If I use an array to create the 30 thermometers, does the DAQ assistant automatically sort the thermocouples in increasing numerical order. For example, would the first and second indicators on my interface automatically be assigned to the a0 and a1 channels of the first module or would I have to do this manually? Same for the waveform? Thanks a lot!
PS - Not sure if this message needed more specifics but just let me know if more info is needed and I will provide!
Solved!
Go to Solution.

I see you are using the DAQ Assistant to create your task. Now I understand why you are asking about labeling. That is the NI Salesman's easy start up spiel... But anyway, have you ever created a task in MAX instead of using the DAQ Assistant? The interface is similar, and there may be a step or two more, but your end application will be more efficient and you will have more options with your data and properties. For instance, I tried to update the physical channel names in the DAQ Assistant setup ,which it does let you do, but it doesn't propagate that change forward to the waveform chart legend. Also, I don't know of any property node for that dynamic data type, although I never use it either. I suggest setting up your task and channels in MAX, if you don't mind giving it a go.
I wrote another example since I figured I didn't really lead you to the end with helping you out. It uses a cluster, although a little barbaric. I thought there was a more eloquent way of doing it by changing the labels, but I could not get it working as I anticipated.
Attachments:
TC Cluster Array Option.vi ‏28 KB

Problems running a particular app via ssh and remote X

Got a few apps (including things like Matlab etc.) running off one of our Linux application servers.
Am now trying to run Stata (using xstata-se) via SGD and it will simply not work.
It works perfectly if you manually log in to the application server from a terminal with ssh -X and run the executable, but when using SGD, it connects, finds the application, says it's starting it, but then the connection to the Linux server is simply closed. The application session (with pause/play/X buttons etc.) remains even though an X window never appears.
I've duplicated the Matlab application that works perfectly and simply changed the executable name, so nothing is configured differently but it still refuses to work, instead simply closing the connection.
The /opt/tarantella/var/log/webtop.log on the specific SGD server shows that the app starts correctly, yet no X window ever appears - all other X apps work fine...
I've found that there are errors logged in /opt/tarantella/var/log/wm_error.log with:
X connection to unix:11.0 broken (explicit kill or server shutdown).
Any ideas?
Edited by: Hutch on 23-Feb-2011 07:28

I was having the same issue with Eclipse. If I launched an xterm and then ran eclipse it worked fine but as a published application, it would die after showing the Eclipse splash screen for a second. Adding the ampersand to the end of the launch command fixed it. Strange.
Thanks for following up your post with the fix. I don't think backgrounding the process from the SGD launcher would have ever occurred to me.

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Help!

I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?

Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fi hiw do I get iMac to do it

I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fii and on my iPad via AirPlay. How can I do the same with iMac as this software isn't compatible

To install apps from developers Apple doesn't recognize go to Security and Privacy in the System Preferences and change Allow apps downloaded from anywhere

I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?

I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?

Where exactly did you buy this phone?
Have you tried contacting your phone carrier to activate the phone?
Do you have a sim card?

TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
It tried to send as an SMS but gave the 'green button reject message'.(no money)
Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
Any ideas?
Many Thanks!

Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
What a mess!

HT204291 The Apple sales rep told me I could use Airplay Mirroring between my iPad2 and AppleTV via bluetooth and I didn't need wifi. Is that true?

The Apple sales rep told me I could use Airplay Mirroring between my iPad2 and AppleTV 2 via bluetooth and I didn't need wifi. Is that true?

No. AirPlay is via Wi-Fi.
http://support.apple.com/kb/HT4437
http://support.apple.com/kb/HT5209

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?

Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

Try downloading the driver directly from Canon's web site.

HT5457 Help! I used to upload photos via ios and it was always published up to my 5th photos, but on the 6th, it just go to ios photos album and was not published on my fb's timeline...

Help! I used to upload photos via ios and it was always published up to my 5th photos, but on the 6th, it just go to ios photos album and was not published on my fb's timeline...

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

VC using BW3.0 via XMLA and Multicube

Similar Messages

Maybe you are looking for