VC2 Theme Pack Won't Install on VC3 Using Vista

I am trying to install a VC2 Theme Pack on VC3, and it keeps telling me that I need to install VC2 first. Once I installed VC3, I deleted VC2. Any Suggestions?

I am trying to avoid re-installing VC2. Worried about a conflict. But that is my last resort. Thanks

Similar Messages

ITunes 9 install issues, now iTunes won't install at all. (Vista 64-bit)

I tried to upgrade to iTunes 9 today but it failed to install using the auto-update tool, so as the tool suggested, I tried going manual. It installed, but gave me the "iTunes requires a newer version of Apple Mobile Device Support." error every time I plugged in my iPod Touch, and advised me to uninstall and reinstall iTunes and the Apple Mobile Device Support.
I successfully uninstalled iTunes, though the Apple Mobile Device support is being stubborn, and seems not to uninstall properly, remaining on the list of programs in the control panel.
I tried running both the manual install file (iTunes64Setup.exe) and the extracted AppleMobileDeviceSupport64.msi, and neither work, even though I have the AMDS service stopped in the Services panel in the control panel. The progress bar sits for a while near the finish and then rolls back, and tells me that there was an error with the install.
The error message says:
iTunes installer Completed
The installer encountered errors before iTunes could be configured.
Your system could not be modified. To retry these operations at another time (etc.)
Any help would be appreciated!

There are two programs that might budge it one is the Windows cleanup program (be sure you get the one for 64 bit operating systems if that's what you're running :
http://support.microsoft.com/kb/290301
http://discussions.apple.com/thread.jspa?threadID=2265732&tstart=0
Or there's this one which I've also found useful but 32 bit XP only : http://www.revouninstaller.com/
You'd be doing the forced uninstall which specifically to get program left overs.
For a free 30 day trial there's also this but I haven't tested it as I have the first two : http://download.cnet.com/Total-Uninstall/3010-2096_4-11117407.html?tag=mncol

Itunes installer won't install itunes 7.1 (VISTA)

I unistalled itunes 7.0.2 and tried to install the newest version of itunes. After i allowed windows to start the install a Windows installer window opened and the install process stopped with a window that said 'quicktime did not install. quicktime is a necessary component of itunes.' Anyone out there that can help me?

this is the text in the windows installer window:
Windows ® Installer. V 4.00.6000.0
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.

Itunes 9 won't install on my Windows Vista (64 bit)

I had Itunes 7, and my computer tried to update it to Itunes 9. While its downloading, it all of a sudden stops and says, "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." How do I fix this so I can download iTunes?

While its downloading, it all of a sudden stops and says, "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
That one can indicate trouble with your Apple Software Update for Windows.
The following polydorus post is a good place to start with your troubleshooting:
http://discussions.apple.com/thread.jspa?messageID=10363261&#10363261

Windows won't install any drivers using BootCamp

I'm new to using a Mac (I bought an aluminum 2.0GHz MacBook last month). I need to run Windows on it, and tested in using BootCamp, but I cannot get the Windows XP drivers to work at all. No drivers have been installed for networking, chipset, sound, video, etc.) The device manager shows almost no drivers installed. It is Windows XP SP3 as well. I have also tested this on two other Macs, with the same results. What am I doing wrong?
Thanks in advance for any replies received.

If you have Auto-run enabled (not always a good idea though) it will still open to
/BootCamp folder with Apple Setup.exe to install the drivers and services to add compatibility.
I think Windows Update, esp. now with v. 7 RC1, it finds even 3rd party drivers for me and less trouble, something OS X doesn't provide.
But the step for inserting your DVD.... that is in the Boot Camp Guide and pdf.

Boot Camp - Won't Install Windows XP or VISTA - HELP!!!

Okay so i tried both windows vista and XP. I make a partition everything goes well but, when i clicl Start Installation it tells me that "The installer CD could not be found. Insert your Windows CD and wait a few seconds for the disc to be recognized." I tried the Vista and XP before on the Boot Camp Beta b4 Leopard was released and it worked now whatever i do it doesn't work. Any Ideas??? I really need this to work!!
I tried burning it again to see if it'd work and it didn't!!

Once Windows is installed, and while it is running, put the Leopard CD into the drive and an autoexec on it should take over and install the drivers. Make sure when you boot the install disc that you put Windows on the BootCamp partition and don't overwrite your Mac partition. Also review throughly the BootCamp install guide!
http://manuals.info.apple.com/en/BootCampInstall-Setup.pdf

SSD Drive on HP G60... won't install from recovery media (Vista)

I bought a new SSD .. Intel 501 series. When I try to install OS via the recovery media, it errors with "Recovery data is missing. Please use recovery media to restore your system." Why?
I have tried installing Win 7 on the same machine and it works fine. I just don't have another valid key for 7, so I want to use the OS that came with the machine (Vista)... Anybody solve this problem? Help is greatly appriciated.

I should add that the recovery media worked fine when I ugraded the HDD to another HDD.... but it's just not working when upgrading to a SSD

Windows 8.1 Pro Pack fails to install

Been trying to install Windows 8.1 Pro Pack on my Dell XPS but it continues to fail, indicating 'something went wrong'. I worked with two different Microsoft support techs on this. The first executed a number of scans and started dism.exe /online
/cleanup-image /scanhealth, which finished successfully. They then started dism.exe /online /cleanup-image /restorehealth, which started and remained at 40%. The first tech later disconnected. I worked with another tech that performed
a virus scan and then indicated that I would have to pay for premium service for him to scan the laptop again.
There are no errors listed in the system log that I can find and no way to determine what 'something went wrong' means. All of the non-Microsoft services have already been disabled by the first tech using 'msconfig' so there is nothing running other
than Windows. Does anyone know where there might be a log or trace that I can check to determine why the Pro Pack won't install?
Thank you in advance.

Hi,
We can check the following path to troubleshoot the installation.
C:\WINDOWS\PANTHER\setupact.log
C:\WINDOWS\PANTHER\setuperr.log
Also, please upload it to Onedrive and post the link here.
I would like to share the article:
Windows Setup Log Files and Event Logs
http://technet.microsoft.com/en-us/library/hh824819.aspx
Regards,
Kelvin Xu
TechNet Community Support

ITunes won't install on my Toshiba - it used to have iTunes!

iTunes won't install. It used to have iTunes, but I cleared it off when I thought I no longer needed the computer (big mistake). Now it's my only computer and I want iTunes back, but when I try to install it it reads "This installation package cannot be installed by the Windows installer package. You must install a Windows service pack that contains a newer version of the Windows Installer Service."
Now, how do I do that? I tried faffing about with installing this and that yesterday, but none of it seemed to work. I'm a stupid girl with no computer skills - I need definitive instructions!

Now, see, I did try that. My computer is now happily updating itself where it wasn't before, but still the same message. I also went and searched Google for a 'Windows Service Pack 2', which lead me to the microsoft site, which gave me the option of downloading the service pack. "Oh good!" I thought, "This will be fixed in no time!"
Wrong.
I downloaded said service pack, tried to run it and it too decided not to work. It sprung up a message that was something like "There is nothing on your computer that needs this pack" or something like that.
Is my computer just so old that it's beyond saving? It is far older than a laptop should be, I know. I bought it in 2003. (I'd also like to point out that I'm not daft, I DID have a brand new laptop - which decided it didn't fancy having a working motherboard anymore. Clearly my ancient Toshiba is far more reliable.)

Adobe PSE 8 with Bamboo Captures Won't install

I just bought 2 Bamboo Captures by Wacom and went to install one on my Mac OS X 8. For some reason I can't download the Adobe Photoshop Elements 8. It stops at the installing page - nothing happens. It installed perfectly on my MacBook Pro & our other iMac OS X 8. I even tried using the disk that came with the other Bamboo and it still won't install. I used MacKeeper to clean things up and then restarted the computer and still it won't install. I am an absolute layman when it comes to computers. Help!

Hi,
I can't be certain, but I can't see any reason why PSE 8 shouldn't be compatible with Windows 8.1.
Do you get any error message when trying to install PSE 8?
If you were to upgrade to PSE 13, there should not be any problem with your existing files. It would be best to use the organizer's Backup Catalog to hard drive on the old computer and then the restore catalog on the new computer. That way both the catalog information and the photos will be transferred across.
I suggest that you make sure that there are no missing files in your current system.
Brian

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS. Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc. Somethings not right. What the Heck ?

See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

I wish to install Mozilla Firefox as my Browser having re-installed XP Home Edition on my 'old' Dell losing my Service packs, so Firefox won't install.

As I am on the early XP, without any Service packs, I want to up-date to SP3. The Microsoft Website won't offer any help. Firefox won't install and I need a prompt to send me in the right direction.
I am using IE version 6.00 and it is refused access to updates because it is so old.
The 'old' Dell runs well but had suffered my bad management one night resulting in the need to re-install XP. It is my second PC and I am running 8.1 on my newer machine, so I can access help topics.
What is my next step please?

See if this works to get the XP2 and XP3 updates.
http://betanews.com/2014/05/26/how-to-continue-getting-free-security-updates-for-windows-xp-until-2019/

CF 7.02 won't install ond Windows Server Enterprise 2003, Service Pack 1, IIS 6.0

CF 7.02 won't install on Windows Server Enterprise 2003,
Service Pack 1, IIS 6.0. When I run the Administrator the message
indicates that MX has been installed but when I open the page with
the web browser the message is Service Unavailable.

I get the message when I open try to load ColdFusion
Administrator page or the index page on the cold fusion web site
that I am installing.

Jam Pack 4 update won't install

I've resinstalled *Jam Pack 4* 1.0 and went to Apple's site and downloaded the 1.0.1 update to correct some sound quality issues. However, the update won't install. I keep getting the message, "There is nothing to install," when I get to that step in the installation process. I see in an archived area others have had this problem as well with this Jam Pack 4 update. Why won't the update install?
Any help out there for this?

try repairing permissions:
http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions

My Macbook Pro downloads software updates but it won't install them?

My late 2011 MacbookPro downloads software updates but when I try to install them, it tells me that it's not supported? The software is currently OS X Lion 10.7.5 and I tried upgrading a few things but it won't install. For example, I tried to get the latest update for iMovie, which is crucial for my studies, but it just tells me to update my macbook which is driving me nuts! Help please?

You would need to upgrade to Mavericks to upgrade iMovie to the version now on the App Store.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

VC2 Theme Pack Won't Install on VC3 Using Vista

Similar Messages

Maybe you are looking for